6380-E mobo - what's the max CPU?

Hi -  I have an MSI 6380-E (KT3-Ultra2) motherboard.  The manual says an Athlon XP 2200+ is the fastest CPU it can handle.
However, I believe I read that up to an Athlon XP 3000+ can be used if the BIOS has been updated.
The AMI BIOS version is 5.70 - the last one MSI released for this motherboard.
What is the fastest CPU this motherboard can handle?
Thanks
Joe

Hi - thanks for responding.
1 GB PC2700 333 MHz DDR RAM
Motherboard Properties
V5.7 022403
Motherboard Name   MSI KT3 Ultra2 (MS-6380E)
Front Side Bus Properties   
Bus Type   DEC Alpha EV6
Bus Width   64-bit
Real Clock   133 MHz (DDR)
Effective Clock   267 MHz
Bandwidth   2132 MB/s
Memory Bus Properties   
Bus Type   DDR SDRAM
Bus Width   64-bit
Real Clock   167 MHz (DDR)
Effective Clock   333 MHz
Bandwidth   2666 MB/s
Chipset Bus Properties   
Bus Type   VIA V-Link
Bus Width   8-bit
Real Clock   67 MHz (QDR)
Effective Clock   267 MHz
Bandwidth   267 MB/s
Motherboard Physical Info   
CPU Sockets/Slots   1
Expansion Slots   5 PCI, 1 AGP, 1 CNR
RAM Slots   3 DIMM
Integrated Devices   Audio
Form Factor   ATX
Motherboard Size   230 mm x 300 mm
Motherboard Chipset   KT333
Extra Features   Fuzzy Logic 4
Antec True Power 330 watt PSU
Individual dedicated circuits for +3.3V, +5V and +12V outputs.
Voltage feedback and tighter ±3% regulation maintains accurate voltage to all components.
Antec Low Noise Technology achieves the optimum balance between noise reduction and necessary cooling.
ATX12V compliant with +12V connector and Aux. power connector for use with AMD™ and Intel® based systems. Backwards compatible with previous ATX standards.
2 Serial ATA drive connectors.
Dedicated Fan Only power connectors allow TruePower to control the speed of case fans, reducing total system noise.
Very low minimum load: 0.8A at +12V
Nylon sleeve on wiring harness for improved ease-of-use and airflow.
Two double ball bearing fans.
Gold plated connectors.
Additional Info about PSU at this link:
http://www.antec.com/specs/true330_spe.html
Joe

Similar Messages

  • What is the max supported CPU for MSI 865PE-NEO2-LS?

    Can someone please tell me what is the max supported CPU speed for the MSI 865PE-NEO2-LS?  I have a P4 2.8@800Mhz, but was told that with a BIOS upgrade this motherboard can achieve up to 3.2?  Is that right, or can it support higher speeds such as the 3.4+
    Thank you!

    Hello,
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=433&kind=1
    I think A6728IMS.210 means BIOS 2.1 so it may already work with the 3.2Ghz CPU.
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=433&kind=1

  • What is the max. count of internal worker-threads in B1iSN 88?

    Hi Experts,
    We have an installation of B1iSN 88 with an ECC 6.0 and 54 SAP Business One installation. The Hardware is 8 Core multi-threads processor. 32GB Memory. Now we have a problem with the queuing of Events. What we have found is that the configuration of the internal worker-threads is set to -1(please see below for the settings). We change the settings to xcl.threads=20 and it improves the queuing. My question is what is the max. count of internal worker-threads per core? so that we can know how many worker will set and if we need to upgrade the CPU to 16 Core..
    # The max. count of internal worker-threads afforded for the internal Scheduler (defaults to 1)
    # The value of 0 means that there is no limit (what in general should not be set up).
    # A negative value means the count of threads per available processor
    xcl.threads=-1
    Regards,
    Wilson

    You're very welcome.
    Yes, they are very nice machines. 
    What a jump in performance when I swapped out the Pentium 4 620 mine had, for the PD 945, and tossed in 4 GB of memory.
    That box will also run the Radeon HD 6570 with no problem too, which is what I put in mine.
    The downside of that model is that there are no settings for ahci or raid.
    I own or have owned every CMT since the d510 with the exception of the dc7900.
    My main PC is now the 8200 Elite CMT which I installed W8.1 on.
    It has an i7-2600 processor and 32 GB of memory, 1 TB SATA III hard drive.
    I threw in a Radeon HD 6670 in that one.
    Best Regards,
    Paul

  • What is the Max Number of Total Work Process that we can Have on  One C.I

    Hi,
    What is the Max Number of Total Work Process that we can have on a Single C.I
    Is there any Limit that We can only have Perticular Number of Total work process ?
    Or it is just Unlimited number of total work process
    Thanks & Regards
    Dan.

    from the system throughput point of view a rule of a thumb is:
    1 up to 4 sometimes 5 workprocesses per CPU.
    (one is used in Benchmarks where you have a very small number of transactions running with a small amount of database accesses)
    you can easily find it out:
    configure 4 WPs per CPU. If you have a number of WP's consuming nearly no CPU time you can reduce the number of WPs.
    regards
    Peter

  • HP Pavilion DV2700 Special Edition what is the max ram for this model laptop?

    HP Pavilion DV2700 VERVE Special Edition
    Operating System  Windows Vista 64 bit Service Pack 2
    Year made 2007 
    Processor AMD Turion 64 X2 TL- 60 2.0 GHz
    Current Ram 4GB
    would like to know what is the max ram 
    PS 
    Can i install and other Processor or is this and intergrated one with the motherboard.? 
    In Advance thank you for your time to look at my question
    Indarktimes
    This question was solved.
    View Solution.

    Hi
    Please find the link given below for your model off unit Max Memory supported is 4GB.
    http://h10010.www1.hp.com/wwpc/ca/en/ho/WF06a/12139188-78299199-78299212-78299212-78299212-81135202....
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • What is the max size of HDD I can use in my dc7600 CMT

    I am using an HP dc7600 CMT which is working fine after upgrading to a Samsung 128GB SSD, Intel Pentium D 3.4 GHz, 4GB RAM, and an AMD Radeon HD 6450. I am running Win 8.1 Pro x64, with the most recent upgrade, and have absolutely no problems. I now want to add a second internal HDD, and wonder what is the max size  I can go to. Can I go to 2TB, or am I limited to a lower figure? 1TB? 500GB? 250GB?
    Will be glad for some help here, especially if it has been actually tried in practice.
    Thanks in advance.
    Best regards
    This question was solved.
    View Solution.

    You're very welcome.
    Yes, they are very nice machines. 
    What a jump in performance when I swapped out the Pentium 4 620 mine had, for the PD 945, and tossed in 4 GB of memory.
    That box will also run the Radeon HD 6570 with no problem too, which is what I put in mine.
    The downside of that model is that there are no settings for ahci or raid.
    I own or have owned every CMT since the d510 with the exception of the dc7900.
    My main PC is now the 8200 Elite CMT which I installed W8.1 on.
    It has an i7-2600 processor and 32 GB of memory, 1 TB SATA III hard drive.
    I threw in a Radeon HD 6670 in that one.
    Best Regards,
    Paul

  • We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

    we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
    Appreciate your support and if possible , how to do this?

    If you want to work with Mac OS X, you need one computer per simultaneous user.
    What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
    Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

  • I have MacBook Pro 2.2GHz Intel Core i7 (15-inch DDR3) Early-2011 and I want to upgrade RAM, What is the MAX RAM can I get it 8GB or 16GB?

    I have MacBook Pro 2.2GHz Intel Core i7 (15-inch DDR3) Early-2011 and I want to upgrade RAM, What is the MAX RAM can I get it 8GB or 16GB?

    Maximum Memory     16 GB (Actual) 8 GB (Apple)
    Memory Slots     2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

  • I am looking to get a new 13 inch mac book pro, what is the max RAM that I can install.  I know configured from Apple is 8 GB, but can I put 16 GB after?

    i am looking to get a new 13 inch mac book pro, what is the max RAM that I can install.  I know configured from Apple is 8 GB, but can I put 16 GB after?

    Yes, you can install 16GB in your new macbook pro.
    Go here (OWC) and here (Crucial) to give you options on how much you want to spend.
    Good luck.

  • What is the max memory a 2nd Gen iMac (2008) can run and where can I buy it?

    What is the max memory a 2nd Gen iMac (2008) can support and if it is more than 2GB, where can you purchase?

    Go to Crucial.com or OWC, you will get good advice and good memory suitable for Macs.
    http://www.crucial.com/uk/index.aspx?gclid=CJyMwKGJuL0CFWfLtAodGXEAMQ&cm_mmc=goo gle-_-uk-_-brand-_-null&ef_id=UzbobwAAAS7VFVy@:20140329153615:s.     Note UK site.
    http://eshop.macsales.com/?utm_source=google&utm_medium=cpc&utm_campaign=adwords &gclid=CNLf77iJuL0CFTCWtAodiFUAVA

  • What is the max file size that a Adapter Engine [J2SE] can handle ?

    We are having a scenario where a 4 GB compressed file needs to be sent across without mapping, I'm trying to explore the possible options to tackle this scenario.
    Some of the options, we are considering :
    - Sending a file from one Adapter Engine [J2SE] to another Adapter Engine [J2SE] bypassing PI. Adapter Logs will be monitored. What is the maximum file size that can be then handled assuming a standard installation ?
    - What is the max file size that Adapter Engine [J2SE] can send through PI without mapping?
    Any help with the above options or with any other possible solutions to handle extremely large file transfers will be much appreciated.

    Hi,
    j2se is not a good option here
    if you have 4gb then you need a copy solution
    a) build an proxy that will just copy the file from sender dest to receiver
    b) build an adapter that will do the same as proxy)
    this way processing of this message will be controlled with SAP PI/XI
    it will be as quick as copy & paste of the 4gb file
    I did the a) for one of the flow for 300 mb and it works perfectly
    Regards,
    Michal Krawczyk

  • What is the max number of hyperlinks supported in a PDF docment?

    What is the max number of hyperlinks supported in a PDF docment?
    How do I find out how many hyperlinks there are in a PDF document?

    I don't think there's a limit to the number of links you can add to a file...
    This code (taken from the reference files) will report the number of links in your file:
    var numLinks=0;
    for ( var p = 0; p < this.numPages; p++)
    var b = this.getPageBox("Crop", p);
    var l = this.getLinks(p, b);
    console.println("Number of Links on page " + p +" is " + l.length);
    numLinks += l.length;
    console.println("Number of Links in Document is " + numLinks);

  • I got my first mac and wonder what is the max ram capacity?

    This is my first mac and I gotten it for school for my animation and visual effects. Since they like using tutorials that uses a lot of mac commands instead of windows so I am doing this so I can easily follow along. I gotten a Apple iMac MD063L from newegg it is coming with 8gb of ram and just wonder if it can go higher like what is the max it could do? I just want to make sure it can handle programs like Maya, adobe after effects but primarily Maya and related programs. When it comes to rendering a project. 

    That partial part number relates to 3 different refurbished 27" iMacs at NewEgg. All 3 can be upgraded to 32GB of ram. Only buy ram from either OWC http://eshop.macsales.com/  or Crucial http://www.crucial.com/ and avoid the bargain basement brands sold by other vendors. They're all mid 2011 models I believe.

  • What is the max size of a zip file with the JDK1.5 ?

    Hello everybody,
    I'm a french student and for a project, I need to create a zip file, but I don't know in advance the number and the size of files to include in my zip.
    I wish to know if someone have the answer to my question : what is the max size of a zip file with the JDK1.5 ? I believe that with the JDK1.3, the limit size of a zip was about 2Go, wasn't ?
    Thank you for all answer !
    Good day !
    PS : sorry for my very poor english ;-)

    Here is all I have found for the moment :
    ...Okay, what about my suggestion of creating your own 10GB file?
    Try this:import java.io.File;
    import java.io.RandomAccessFile;
    import java.nio.ByteBuffer;
    import java.nio.channels.FileChannel;
    import java.util.Random;
    class Main {
        public static void main(String[] args) {
            long start = System.currentTimeMillis();
            int mbs = 1024;
            writeFile("E:/Temp/data/1GB.dat", mbs);
            long end = System.currentTimeMillis();
            System.out.println("Done writing "+mbs+" MB's to disk in "+
                    ((end-start)/1000)+" seconds.");
        private static void writeFile(String fileName, int numMegaBytes) {
            try {
                int numBytes = numMegaBytes*1024*1024;
                File file = new File(fileName);
                FileChannel rwChannel =
                        new RandomAccessFile(file, "rw").getChannel();
                ByteBuffer buffer = rwChannel.map(
                        FileChannel.MapMode.READ_WRITE, 0, numBytes);
                Random rand = new Random();
                for(int i = 1; i <= numMegaBytes; i++) {
                    for(int j = 1; j <= 1024; j++) {
                        byte[] bytes = new byte[1024];
                        rand.nextBytes(bytes);
                        buffer.put(bytes);
                rwChannel.close();
            } catch(Exception e) {
                e.printStackTrace();
    }On my machine it took me 43 seconds to create a 1GB file, so it shouldn't take too long to create your own 10GB. Then try zipping that file.
    Good luck.

  • What is the max limit

    I have written a file parser to insert a CSV directly into a table. The CSV contains 2 fields that would be considered memo fields in Access.
    Now I get this Error: (ORA-06502: PL/SQL: numeric or value error ) when I run this section of code:
    DBMS_LOB.converttoclob (v_text_file, v_binary_file, DBMS_LOB.lobmaxsize, v_dest_offset, v_src_offset, DBMS_LOB.default_csid, v_lang_context, v_warning); The error I believe is relating to this section of the code: DBMS_LOB.lobmaxsize .
    My questions are:
    What is the max size of DBMS_LOB?
    And has anyone had any success inserting/parsing a field that contains 10000+ characters with Access embedded special characters?

    Hello,
    " Only problem that I have with OMWB is that it converts on memo field into a clob but the other into a varchar2(255) and truncates the data"Are you talking from experience? The varchar2 limitation doesn't make sense to me. I didn't use the tool my self, but I remember reading that the Oracle model can be changed. Maybe you should check the documentation more carefully. You can also try to open a new thread, with a specific subject on Access migration. That can draw the attention of the experienced posters.
    " Hopefully the APEX team can come up with something about converting/recognizing Access special characters in the next version."From what I'm reading about ApEx 3.0 the last few days, it seems it will include a dedicated tool for Access migration.
    Regards,
    Arie.

Maybe you are looking for

  • Updating WBS element in a sales order

    There is application in Project System (PS) module where I am creating the Project using bapi BAPI_PROJECT_MANTAIN and then uploading the budget for the same using bapi KBPP_EXTERN_UPDATE_CO. After this when I am trying to update the sales order to u

  • MBPro shutting down and running v. hot!

    My MBP has recently started shutting down with no warning. Always happens on battery power but when I turn it on again the battery indicator shows plenty of juice left. It also seems to be getting really hot. Is there some sort of thermal cut out? I

  • IE Crashes when page loads

    My site loads perfectly in FF2 and on Safari (Mac), but crashes IE7 (i.e. "Internet Explorer has encountered a problem and needs to close. We are sorry for the inconvenience") Details: Faulting application iexplore.exe, version 7.0.6000.16544, faulti

  • Can't start xbmc.service since upgrade to xbmc 12.3-10

    Hi, I normally start xbmc via a service file and do not use a login manager, and have done successfully for some time now, I can no longer start xbmc.service since upgrading to xbmc 12.3-10 The errors I receive in the journal are: Feb 27 10:52:20 wol

  • Transport management and Global trade system data to BI

    Hi All, We are trying to Extract Transport management (TM) and Global trade system (GTS) data into BI. Can you please let me know the standard Data sources and the process to extract the data. We are implementing EM, GTS and TM. Please let me know th