64-bit Boot Image Drivers Are Not Working

I've been deploying Windows 7 x86 and x64 for years. I've been using the same 32-bit boot image for both and it's been working great.
We've decided to take the plunge and go all x64 moving forward. I want to switch to a 64-bit boot image so I don't have to curate the drivers for two architectures.
I've created a 64-bit boot image, and included all of the 64-bit versions of the drivers in my 32-bit boot image, but they don't seem to be working. I've tried booting 3 different models, but I receive "Failed to find a valid network adapter."
I've looked within the boot image, because I wanted to see the driver files. Either I just don't know where I'm looking, or they're in the "Files" folder where each file is renamed to a number.
What might I have done wrong?

I've solved my problem by downloading and importing the Dell WinPE driver pack. Now I've just got to add the USB 3.0 drivers (I support laptops that don't have optical drives), and I'll be set.

Similar Messages

Drivers are not working even after reinstalling in Hp 2000 series windows 8.1

Suddenly my audio drivers is disabled. It shows error to re install drivers , i did but still its not working... I have Hp 2000 series laptop windows 8.1 Kindly help

Hello @Noman2006,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the audio drivers are not working on your notebook computer, and I would be happy to assist you in this matter!
To return the audio output to working order, i recommend re-installing the original software and hardware drivers on Using Recovery Manager to Restore Software and Drivers (Windows 8). To update these drivers, please follow this resource on Using HP Support Assistant (Windows 8).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Since I refreshed Firefox 36.0.4, "Save page as" and "save image as" are not working (even in Safe mode)

I refreshed FF 36.0.4 on invite. Since then "save page as " and "save image as" are not working -- no response when clicked.
In Safe Mode, same problem.
I serached past forum discussions and found several occurrences, but no convincing response.

''afew2 [[#question-1054433|said]]''
<blockquote>
I refreshed FF 36.0.4 on invite. Since then "save page as " and "save image as" are not working -- no response when clicked.
In Safe Mode, same problem.
I serached past forum discussions and found several occurrences, but no convincing response.
</blockquote>
I tried troubleshooting plugins, none appeared to be causing the problem.
I installed 36.0.1, but no difference. Went back to 36.0.4, still no change.
I ran a malware check with Malwarebytes, no change.
A past thread here suggested deleting localstore.rdf, which I tried, no result.
People have had this problem in the past. No one has any idea of how to fix it?

My usb port drivers are not working

i have purchaced new hp sleekbook os-win8, but after few days the usb drivers are not working what shoud i do
This question was solved.
View Solution.

What did you plug into the usb port.
Have your tried multiple devices?
When was the last time they worked?
Try removing the drivers in device manager.
Then reboot and let them reinstall
If that fails the try a System Restore to previous date when they did work.
Here is how to do a System Restore
http://www.youtube.com/watch?v=CsY_FnyJzdo
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

USB DRIVERS ARE NOT WORKING

HELLO SIR,
I HAVE A PROBLEM WITH MY USB DRIVERS. MY USB DRIVERS ARE NOT SUPPORING FOR MASS STORAGE DEVICES ONLY.
I HAVE OPENED THE CONTROL PANEL FOR USB DEVICES. IT GIVES ERROR MESSAGE THAT, "
Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)
The driver could not be loaded because a previous version of the driver is still in memory."
SO WHAT CAN I DO FOR THIS? PLEASE HELP ME.

Can you check the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E967-E325-11CE-BFC1-08002BE10318}
At that registry key, in the right window, is there a "Name" UpperFilters and/or
LowerFilters?
If so, what is "Data" for those Names?

Image - maps are not working in Firefox but it does work in IE. Some help required.

Hey there,
Last week i've been building a website for our company. However, there is still a problem with our banner/slider. I've uploaded some images and the slider is currently working. But the image maps ,using <map> & <area> taggs, are not functional in FF. They do work in IE so I suppose it should be working correctly.
I've tried using Chrome & Safari but the problem keeps persisting.
Some help would be nice (:
Marnix.

Doesn't work in Firefox, Chrome, and Safari? <br />
Sounds like you're using non-compliant code.
http://www.w3.org/TR/html5-author/the-map-element.html <br />
http://www.w3.org/wiki/HTML/Elements/area
You could try posting the URL to a test case at the Web Development / Standards Evangelism forum at MozillaZine, and see what they have to say. The support helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.

Windows support files - bootcamp, drivers are not working [no sound, keyboard shortcuts]

Hi guys,
I'm using the following version of Bootcamp Version 5.0.3 (464) on MBP mid 2010, wit latest OS on it. I ave installed Windows 7 through multiple errors and had to clean the whole HD after backing the files. The Windows is running fine now, however I think I havent dowloaded Windows Support Files (second tickbox) in the bootcamp assistant when installing Windows (I only ticked the third box).
And now I have tried to download the drviers from bootcamp on USB after formating it correctly, but the USB shows its empty.
I tried the following steps:
I went back into my Mac and opened up Bootcamp, reinstalled all the Windows Support Files (the top box of Bootcamp) and made sure to put them onto an external device i.e. USB/External Hard Drive etc...
I then logged back onto my partioned Windows on my Mac and updated all the Windows Support Files. After that I restarted my computer back into Windows and popped in Guild Wars 2...
But nothing seems to be working. I went to Windows Update smth, and looked for updates found quite a few of them and isntalled all of them, but noting is working - sound and keyboard shortcuts are gone and I cant downloaed the software I want.
Could you please advice on what to do with those drivers. I have been trying for days...

Hi JFFulcrum, thanks for your suggestion. I updated the BIOS earlier and still am getting the same results. Also, I decided to try another old soundcard I had laying around today, a SB PCI 512. And....same result i'm getting with the Audigy. Windows detects both cards, says they're working, but there's no sound. I'm beginning to think I should just RMA the board
if you could find anymore information about those DMA issues, please do post! I have e-mailed gigabyte 3 days ago and they still haven't gotten back to me, so i'm not really sure where to go from here, if it's some setting in the bios, some sort of driver, a bad pci slot or what. ..

Drivers are not working for new BT wifi dongle

I just got BT infinity installed today. I also got the dual band AC wifi dongle 900 But it will not register on my PC. I tried installing the drivers for it but i noticed they are only for the 600 model. I know the Home hub 5 just came out along with the new dongle so is it just a case of waiting for drivers to be realesed?

Hi lightlamp,
I'm sorry about that, check out this link for the AC dongle drivers and let me know if you need any further help.
Cheers
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

[Solved] Ranger image previews are not working

I have been trying to drop my gui apps for mostly cli applications and decided to install the ranger file manager. It works great but the image previews show a black bar where the highlighted file is, right now my config is stock except for turning the previews on. I have searched and didn't come up with any results. I have tried even turning off transparency in urxvt to see if that helped but it didnt. Any help or direction would be greatly appreciated.
Ok I'm not sure what it was but setting this option:
# Draw borders around columns?
set draw_borders false
to true has fixed it
Last edited by LowEndGeek (2013-06-27 23:27:22)

HI,
Go to ~/Library/Preferences and move the com.apple.Dock.plist file to the Trash.
Restart your Mac and see if that helped.
~ (Tilde) character represents your Home Folder.
Carolyn

All drivers are not working and drivers are not supporting

all supporting drivers hp link is given............ it was installing plz help

@retheesh ,
Hello and thank you for posting on the HP support forums. So that we can help you here please check out the following links.
Advice for asking the "Very Best Question"
How To Search For An Answer - Video
As well when you post back please include your full model and product number.
HP Notebook PCs - How Do I Find My Model Number or Product Number?
Please when posting back can you state your request clearly as to what you are trying to resolve and what issues you have had in resolving this issue. This will help in finding a way to help you in this issue.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Touch Pad and Web Cam are not working after installing drivers also

Hiii
Synaptic Touch pad drivers are not working like not detecting the hardware so please help me on this
and
Webcam is not working like its not detecting even after installing cyberlink software given in the hp web site
please help me regarding this problems

1.Download hp support assistant.
2.Run it and go to the tab updates and tune-ups.
3.Click in the button check for updates. It will find you the updates.
4.Click in the button Download and Install.
5.When it finish restart your computer.
[link:http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html?jumpid=va_r602_us/en/any/psg/pl...
Also if it doesnt' work , you can also try :
1.Right click to the computer.
2.Click to the manage option.
3.Then select the device manager.
4.After that go to imagine devices and select your camera, then right click on it and select the option update the driver software do the same in the touchpad.
If and this doesn' t work unistall the drivers and install them again.

Boot-up keyboard commands not working

Hello.
For some reason, when my iMac is booting up, the keyboard commands to affect boot-up (for example, holding Option to pick which drive to boot into) do not work. It wasn't too much of an issue before, since I could access my Boot Camp partition through the Startup Disk preferences pane. But that partition suddenly stopped showing up there, and with holding Option not working, my Boot Camp drive is essentially inaccessible to me. Does anyone know why these keyboard boot-up commands are not working, or any way to fix this? I'd greatly appreciate any help.
Thanks in advance.

Hi,
Please help!
I picked up a Mac Pro Dual Intel Quad-Core from a partners office. The system has four 750gb drives. It had Tiger on it.
Here are the steps I tried:
1. I got leopard and installed it. I installed on drive 1.
2. Software updates. Installed Flash runtime and Silverlight runtime.
3. Opened boot camp and split the boot drive equally for windows and mac os.
4. I then tried installing Vista Business and my monitor freaked out. I started having weird colors displaying after the boot up to the Windows Vista Disk. The Disk is from my MSDN subscription and I've installed with it before. The install failed after Windows install restarted the machine.
5. Reformatted all the drives and reinstalled Leopard with the OSX boot DVD. I skipped installing updates and just went straight to boot camp after a fresh Leopard install. Same problem on windows install.
6. I thought the drive might be messed up, so I wiped all the drives again and tried installing OSX on drive 4. BIG MISTAKE :-/
OSX worked but once I started installing windows Vista it crapped out again.
Now I can't boot to anything.
I tried manually putting each drive into bay 1 to boot. No dice.
None of the boot shortcut commands seem to work: Holding option does nothing at start up. Can't boot into single user mode. Holding c does nothing at start up. It's possible my keyboard is not working correctly because I have had problems with my USB keyboard in the past.
Any suggestions?? I'm going nuts here and I need this machine set up ASAP for a huge project.
Thanks in advance.

After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.

After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.
This is boot camp problem, because in other normal notebooks (e.g. SONY VAIO, Lenovo with Windows 7) the gadgets are working normally.
I am attaching the screen shot of Desktop Gadgets and Security updates of Windows 7.
Kindly solve this issue ASAP.
Shailendra Gupta
<edited by host>

You are not addressing Apple, but a community of unpaid volunteers. So ASAP won't cut it. Also, you should refrain from posting personal information (like your email address) in the body of your comments, as this is part of the community usage guidelines.
Have you reinstalled the latest Boot Camp Windows 7 drivers, just in case Microsoft overwrote some of them during the Windows 7 security update?
If you want to communicate issues with Apple about Boot Camp and OS X, click on the link. Just don't hold your breath on receiving a response.

PavillionG7-2315nr windows 7(64 bit) USB serial control or usb ports are not working. Please help!

Hi I downgraded the laptop from windows 8 to windows 7 64 bit. Two of my USB ports are not working and cant find the right drivers for it. Can you please direct me, where I can download and update the drivers? Thanks in advance.
Shawe

Hi:
Download and instal both of these drivers and reboot.
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_125616_1&swEnvOid=405...
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_123787_1&swEnvOid=405...

I bought a new 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest.

I bought a new 5s and its front and back camera are not working, showing black image. My phone is IOS 7.1.2 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest.

I have the same issue on my iPhone 5s
I've closed the app and re-booted the phone several times but it did not resolve the issue.
Upgrading to iOS 8.0.2 did not resolve it either.
Erasing the iPhone and restoring from a backup did not resolve it.
I'm not sure what else to do.

64-bit Boot Image Drivers Are Not Working

Similar Messages

Maybe you are looking for