64-bit driver does not load at boot

Hi.
After recompiling a scsi target driver for 64 bits, it does not load automatically at boot time as it does if booting 32-bit kernel.
The 64-bit module is copied to /usr/kernel/drv/sparcv9. the <driver>.conf file is in /usr/kernel/drv. Using add_drv is fine, it attaches and loads the driver (the driver works also).
It also loads using modload manually after boot or calling it from /etc/rc3 or so.
what else is required on 64-bit kernel to get the autoload?
Thanks,
Luis.

Similar Messages

Sidetrack driver does not load

Hi,
I've installed the latest version of sidetrack. but when i open sidetrack a message window pops up saying:
'The SideTrack driver is not loaded.
Please restart your computer to load the driver.'
I have done exactly as the readme file says.
When i got my mac i did a custom install so i did'nt fill up my hard drive with language packs etc. i do not need. do i need to install something else that would otherwise be in osx for this to work?

I have tried restarting several times aswell as uninstalling, reinstalling and downloading the program again.
When i right click the sidetrack app. in the startup folder and select get info it says that the application is a unix executible file.
I can only find one other person on the forum with this problem but it was not answered.
Thank you

External drive does not mount on boot

I have a Toshiba MK5055GSX 500GB external drive which I use for Time Machine but for some reason it does not automatically mount from a cold boot. Before I started to use it for Time Machine (it was formatted as NTFS at the time) I had not problems with it. All other external drives correctly mount on boot.
I had thought it might be a problem with the drive itself but if I disconnect it and reconnect it with my iMac running it mounts every time without fail. If I reboot after it has mounted it also mounts at boot. Only if I start the iMac using the power button with the drive already connected does it fail to mount and the results are consistently repeatable.
Does anyone have any ideas why this might be happening and how to fix it?

Does this drive have a separate power brick? If it does I suggest using it to see if that fixes the problem. If the enclosure has both USB and Firewire ports try using the drive on a Firewire port instead of a USB port.
It sounds like the drive is not spinning up early enough in the startup process to be detected.
Not knowing how you prepared the drive for the Mac, you should re-prep the drive as follows:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Apple mobile device DRIVER does not load/ is not installed

this is what my itunes diagonstic says concerning connectivity tests
Microsoft Windows 7 x64 Ultimate Edition (Build 7100)
Hewlett-Packard HP Pavilion dv2700 Notebook PC
iTunes 8.1.1.10
QuickTime 7.6
FairPlay 1.3.6
iPod Updater Library 8.1d19
CD Driver 2.1.0.1
CD Driver DLL 2.1.1.1
*Apple Mobile Device 2.4.1.7*
*Apple Mobile Device Driver not found.*
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number 88107370E6DED672
Current user is not an administrator.
The current local date and time is 2009-05-16 00:21:13.
iTunes is not running in safe mode.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family (Microsoft Corporation - WDDM 1.1)
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family (Microsoft Corporation - WDDM 1.1)
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 8.1.1.10 is currently running.
iTunesHelper 8.1.1.10 is currently running.
Apple Mobile Device service 2.12.36.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Ricoh 1394 OHCI Compliant Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
Fifth Generation iPod (iPod with video) running firmware version 1.3
Serial Number:
i found it out that the apple mobile device is running yet there is no driver that is loading so that it can recognize my iphone
any suggestions on how to get the computer automatically to search the driver in the system32/drivers folder?
i already tried downloading the driver and copying into the folder and doing restart
i've also tried to reinstalling itunes and i used winrar to extract the applemobiledevice support and repaired but it didn't do anything
are there any other suggestions?

Sorry, I should have qualified that: in the past I have given dump/debug/log details to people in the 'Windows' world to try to solve problems that I've thought have needed immense details to resolve but since owning a Mac I have discovered that if I am thinking at that level of detail then I have lost the real plot and my pulling back and looking at things simply again has been an eye-opener, hence my suggestion in response to your question to simply 'get a Mac'.
Part of the 'issue' with Windows seems to be its varieties and variants (Windows 7 x64 Ultimate Edition (Build 7100), for example) and the range of various and variable hardware on which it can run, too often with random and non-deterministic results, not to mention the almost limitless and unnecessary combinations of user-configuration options and requirements!
Seriously, get a Mac if you are into the Apple world, even on the periphery, if you want an easier life (in my experience).
Good luck with your 'issue'.

[Arch 64 bit] Powernow-k8 not loading at boot, loads fine afterwards

I get the same error.
Has anyone solved it?
Last edited by deadshox (2010-09-22 20:02:36)

Thanks for seperating this topic.
Now 'powernow-k8' is starting fine. I don't no why, but it starts.
My 'rc.conf':
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="de_DE.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Berlin"
KEYMAP="de-latin1-nodeadkeys"
CONSOLEFONT="default8x16"
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(vboxdrv !atl1c !pcspkr !snd-mixer-oss !snd-pcm-oss !snd-hwdep !snd-page-alloc !snd-pcm !snd-timer !snd !snd-hda-codec !snd-hda-intel !soundcore atl1c pcspkr snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-codec snd-hda-intel soundcore lib80211_crypt_tkip wl acpi-cpufreq powernow-k8 cpufreq_ondemand cpufreq_powersave)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="keil"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(!eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng hal wicd @netfs @alsa laptop-mode)
// Edit
On my Notebook,
HP Compaq 615, 2.6.35-ARCH x86_64 AMD Athlon(tm)X2 DualCore QL-66 AuthenticAMD
i have the same problems with 'acpi-cpufreq' and there is all up to date, too.
Last edited by deadshox (2010-09-23 19:58:57)

Audio Driver does not load when computer is powered up

I have a HP Pavillion Elite Model 9600t desktop PC that I bought from the HP on-line site in June of 2009. This system is running Windows Vista Home Premium 64 bit edition.
No audio card, using the mother board on board audio with powered HP speakers connected to the Green connector on the mother board.
Problem:
When the system is initially powered up, it boots ok, but when the desktop is displayed I get the "No Audio Device is Installed" error message displayed on the lower tolbar speaker ikon.
I can then load the "Realtek High Definition Audio" driver using the recovery manager and restart the system with powering down, and everything will then work ok, untill the system is powered off, then the problem repeats the next time the system is powered up.
The sound playback window under the control panel shows the speakers as "Realtek High Definition Audio Working, but the "Set Default" button at the bottom of the window is greyed out and not functional.
Any guidance would be appreciated

I have a HP Pavillion Elite Model 9600t desktop PC that I bought from the HP on-line site in June of 2009. This system is running Windows Vista Home Premium 64 bit edition.
No audio card, using the mother board on board audio with powered HP speakers connected to the Green connector on the mother board.
Problem:
When the system is initially powered up, it boots ok, but when the desktop is displayed I get the "No Audio Device is Installed" error message displayed on the lower tolbar speaker ikon.
I can then load the "Realtek High Definition Audio" driver using the recovery manager and restart the system with powering down, and everything will then work ok, untill the system is powered off, then the problem repeats the next time the system is powered up.
The sound playback window under the control panel shows the speakers as "Realtek High Definition Audio Working, but the "Set Default" button at the bottom of the window is greyed out and not functional.
Any guidance would be appreciated

U300 Touchpad Driver for Windows 8 Does Not Load Properly

I have spent a few hours with both Microsoft Premier Technical Support and (a very grumpy) Lenovo technician. They have both confirmed that the Windows 8 touchpad driver that is currently posted on the Lenovo site for the U300S does not load properly. It will, as many have reported, disable the touchpad altogether. There seems to be an issue with the loader installing files for both a Synaptics and a Cypress touchpad. This creates an apparent conflict that relegates the touchpad as useless.
If you choose to install this driver, I would recommend that you create a store point so that it can be easily recovered.
A standard mouse works just fine (albeit without any Win8 functionality).
***Lenovo should pull this damaging driver down from their site until a certified replacement can be prepared.***

Hi,
If the computer is OEM, please refer to the user guid manual to know how to boot into WinRE to recovery your system.
Meanwhile please try to enable or disable Secure Boot by referring this article:
Secure Boot
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03653226
Kate Li
TechNet Community Support

Trying to make RAID boot drive - but drive does not appear when starting up

Used Disk Utility to take current boot drive and put it in mirrored RAID. Did this by taking volume, placing it in RAID window, and clicking "enable".
The new drive is shown as bootable, and selectable by Startup preferences but does not work. When I hold Option key during startup, the RAID drive does not show up. Apple support offered no help and said I should get hardware card. (Will add second drive after RAID is bootable).
The 'virtual' disk for the RAID drive (disk4) seems to not be visible.

Howdy bhagon,
It sounds like the iPhone is not recognized in iTunes. Allow me to recommend this troubleshooting assistant named:
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
Start at step 1 and work your way down as needed. Here is that step 1 to get you started:
Update iTunes
Make sure you have the latest version of iTunes. To check for available updates of iTunes on a Mac, go to iTunes > Check for Updates. On Windows, go to Help > Check for Updates.
To install iTunes, you need one of the following operating systems on your computer:
Mac: OS X version 10.6 or later
PC: Windows 7; Windows Vista; or Windows XP
Note: If you are using a 64-bit version of Windows 7, be sure to download the 64-bit version of iTunes.
If your computer does not meet these requirements, you may need to upgrade your computer before installing iTunes.
Thank you for using Apple Support Communities.
Regards,
Sterling

Instant Client on 64-bit Windows 7: Driver does not appear in System DSN

Instant Client on 64-bit Windows 7: Driver does not appear in System DSN tab when creating a new Data source.
What I did so far:
I downloaded the basic and odbc zips for Window 64-bit.
Unzipped the basic zip.
Unzipped the odbc zip to the same directory.
Added the dir path to the System Environment Variable called Path.
Double-clicked on the odbc_install.exe to run it from Windows Explorer.
Then I tried to add the driver to create a new data source but it does not appear in the list of drivers.
From a cmd window, I navigated to the instant client directory and tried to run odbc_install again.
I got the message: Oracle ODBC Driver with same name already exists.
What am I missing?

hello, I did it like that you say,but the result also is "oracle odbc driver with same name already exists". I don't kown what can I do it ,Thank you!

X102e - Hard drive does not boot into Windows

Hi, I was trying to reinstall Windows on my X120e.
I tried clean install with Windows 7 Professional, but the hard drive does not boot into the Windows once it has done the first phase of the install(you know, the copying part)
After the restart done by Windows, it goes as far as "Starting Windows" but does not actually boot into the Windows.
When I try to install Windows with another HDD, the device works well, but I can't swap the HDD because it is not 7.5mm think HDD.
Is there any possibility the HDD will work trough any software-level process? The HDD works fine as external HDD when tested with external HDD adapter, and installs well. only problem is that it fails to boot
Kim
W540( ), Helix(Sold), Tablet 2(Sold) Tablet 2( ), X120e(Sold), X201 Tablet, X41 Tablet(Sold), X41, X32*4, 701C*4

Thank you for reply.
This is not exactly the issue. I was talking about the HDD originally installed in the PC.
The PC successfully recognizes the external disk I used to install the Windows, but the problem was that I did not boot into the "First boot" screen, which basically works on the already installed data.
As of now I have installed an SSD and is working fine. strange part is that HDD works just fine when I use it as an external HDD via adapter. Strange huh?
Kim
W540( ), Helix(Sold), Tablet 2(Sold) Tablet 2( ), X120e(Sold), X201 Tablet, X41 Tablet(Sold), X41, X32*4, 701C*4

My cd/dvd drive does not recognize/load cds

iMac 10.6.8 snow leopard with iTunes 11.0, purchased in 2008.
The cd will be accepted into the drive which will begin to turn/mount the disk followed by a few clicks after which the drive stops, tries again, tries a 3rd time and then ejects the cd. Dvds do load but I have been experiencing "skipping over damaged area" msgs when there is no damage. Resetting the SMC alleviates that problem for dvds but not the cd loading problem. Cds that have been accepted in the past do no load, even brand new cds.
I do play dvds and cds frequently but before I conclude that my drive is failing due to wear and tear, I wanted to know if there's a way to clean the drive, if that's the problem. The drive does not accept a dvd/cd drive cleaning disk.
Any suggestions for further at-home diagnosis/refurbishing before I contact my local authorized repair person or buy a Superdrive to substitute for the malfunctioning drive?

None of the information you have provided answered my question regarding a way to clean/refurbish a drive which will not accept a dvd/cd cleaning disk.
You finally advised me to do what I had already done prior to posting.
Perhaps you have a reading comprehension problem. Although the internal drives are generically referred to as superdrives, I only employed that term in my initial post when referring to purchasing an external drive to potentially be shared with a laptop. So, the confusion is yours.
The link below gives simple yet comprehensive coverage of when, why and how to reset SCM/PRAM, which does not include my CD mounting issue, although it resolved the "skipping over damaged areas" problem I had prior to my original post regarding alternative ways to clean the internal drive.
http://thenextweb.com/lifehacks/2010/12/04/how-when-why-to-reset-the-pram-smc-on -your-mac/
The link below contains a discussion of failing dvd/cd drives for iMacs of the same vintage as mine with the similar mounting issues. I had no success mounting a CD via a virtual XP environment, so it's more likely a hardware issue.
http://forums.macrumors.com/archive/index.php/t-1337712.html
Here's a link discussing pros and cons for buying a USB Superdrive (external Superdrive as I mentioned).
http://www.macworld.co.uk/news/mac/it-worth-buying-apple-usb-superdrive-3491736/

My new hard drive does not allow me to load programs on my IMac. It doesn't recognize my administrator password. How can I correct it?

my new hard drive does not allow me to load programs on my IMac. It doesn't recognize my administrator password. How can I correct it?

Wrong forums. Try http://answers.microsoft.com/en-us/mac

"Your bootable USB drive could not be created" "Boot Camp only supports 64-bit Windows installation on this platform. Please use an ISO file for 64-bit Windows installation."

I try to install windows7 system on my macbook air, which version is 10.8.5. When I open the bootcamp, it let me to choose a windows ISO image, which I've already downloaded from this website: http://www.w7forums.com/threads/official-windows-7-sp1-iso-image-downloads.12325 /, it also asked me to select a USB drive, which is kingston that has 8GB. Then when I clicked "continue", it said that "Your bootable USB drive could not be created" "Boot Camp only supports 64-bit Windows installation on this platform. Please use an ISO file for 64-bit Windows installation." But actually the ISO image I downloaded is 64-bit windows7. I don't know why this would happen. Could someone help me please!!

Thanks for your feedbakc Kiranjj!
I identified the reason to be that the W8 installation file didn't download completely from a Mac OS-device. I downloaded from another Win-device and the moved the installation file with a USB-stick and then everything worked diectly! But thanks anyway.

[Regression] KDE4 does not load anymore after recent kernel update.

Hi,
I have updated my system to latest packages and now KDE4 does not load. i get a Blank Screen.
I can't reach virtual terminals(I tried ALT+F1 to F11, but no response)
Control + ALT + BACKSPACE does not work.
even magic SysRq key(Alt+SysRq+REISUB) has no effect.
So I had to hard reset my machine. somehow I managed to get logs.
/var/log/Xorg.o
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux moody 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64
Build Date: 18 July 2009 03:49:37PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 30 06:43:33 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0xb40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:00f3:0000:0000 nVidia Corporation NV43 [GeForce 6200] rev 162, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf9000000/16777216, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 185.18.14 Wed May 27 01:53:56 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) NVIDIA dlloader X Driver 185.18.14 Wed May 27 01:30:19 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "RenderAccel" "True"
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1280x1024 +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "TripleBuffer" "True"
(**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
(**) NVIDIA(0): Option "PixmapCacheSize" "300000"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 6200 (NV43) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 05.43.02.80.00
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
(--) NVIDIA(0): Samsung SyncMaster (CRT-0)
(--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1280x1024+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (104, 113); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
/var/log/errors.log
Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:08:54 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 27 12:09:04 moody kdm[4164]: X server startup timeout, terminating
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:40 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
Jul 30 06:43:50 moody kdm[4165]: X server startup timeout, terminating
Jul 30 06:44:15 moody kdm[4165]: X server for display :0 cannot be started, session disabled
/etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder62) Tue Jan 6 09:44:34 PST 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Wed Oct 1 15:12:53 PDT 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 71.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6200"
Option "NoLogo" "True"
Option "RenderAccel" "True"
Option "TripleBuffer" "True"
Option "BackingStore" "True"
Option "PixmapCacheSize" "300000"
Option "OnDemandVBlankInterrupts" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1280x1024 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Looks like X server is not starting for some reason and this is the root cause of the problem.
Here is the list of Packages which were Updated
/var/log/pacman.log
[2009-07-25 07:36] synchronizing package lists
[2009-07-25 07:37] starting full system upgrade
[2009-07-25 10:03] synchronizing package lists
[2009-07-25 10:03] starting full system upgrade
[2009-07-25 10:07] upgraded boost (1.39.0-1 -> 1.39.0-2)
[2009-07-25 10:07] upgraded cups (1.3.10-3 -> 1.3.11-1)
[2009-07-25 10:07] upgraded device-mapper (1.02.32-2 -> 1.02.33-1)
[2009-07-25 10:07] upgraded dmapi (2.2.10-1 -> 2.2.10-2)
[2009-07-25 10:07] upgraded dri2proto (2.0-1 -> 2.1-1)
[2009-07-25 10:07] upgraded gcc-libs (4.4.0-5 -> 4.4.1-1)
[2009-07-25 10:08] upgraded gcc (4.4.0-5 -> 4.4.1-1)
[2009-07-25 10:08] upgraded hwdetect (2009.07-1 -> 2009.07-2)
[2009-07-25 10:08] upgraded kbd (1.15-1 -> 1.15-2)
[2009-07-25 10:08] >>> Updating module dependencies. Please wait ...
[2009-07-25 10:08] >>> MKINITCPIO SETUP
[2009-07-25 10:08] >>> ----------------
[2009-07-25 10:08] >>> If you use LVM2, Encrypted root or software RAID,
[2009-07-25 10:08] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2009-07-25 10:08] >>> More information about mkinitcpio setup can be found here:
[2009-07-25 10:08] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2009-07-25 10:08]
[2009-07-25 10:08] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2009-07-25 10:08] ==> Building image "default"
[2009-07-25 10:08] ==> Running command: /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2009-07-25 10:08] :: Begin build
[2009-07-25 10:08] :: Parsing hook [base]
[2009-07-25 10:08] :: Parsing hook [udev]
[2009-07-25 10:08] :: Parsing hook [autodetect]
[2009-07-25 10:08] :: Parsing hook [ide]
[2009-07-25 10:08] :: Parsing hook [scsi]
[2009-07-25 10:08] :: Parsing hook [sata]
[2009-07-25 10:08] :: Parsing hook [usb]
[2009-07-25 10:08] :: Parsing hook [usbinput]
[2009-07-25 10:08] :: Parsing hook [keymap]
[2009-07-25 10:08] :: Parsing hook [filesystems]
[2009-07-25 10:08] :: Generating module dependencies
[2009-07-25 10:08] :: Generating image '/boot/kernel26.img'...SUCCESS
[2009-07-25 10:08] ==> SUCCESS
[2009-07-25 10:08] ==> Building image "fallback"
[2009-07-25 10:08] ==> Running command: /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2009-07-25 10:08] :: Begin build
[2009-07-25 10:08] :: Parsing hook [base]
[2009-07-25 10:09] :: Parsing hook [udev]
[2009-07-25 10:09] :: Parsing hook [ide]
[2009-07-25 10:09] :: Parsing hook [scsi]
[2009-07-25 10:09] :: Parsing hook [sata]
[2009-07-25 10:09] :: Parsing hook [usb]
[2009-07-25 10:09] :: Parsing hook [usbinput]
[2009-07-25 10:09] :: Parsing hook [keymap]
[2009-07-25 10:09] :: Parsing hook [filesystems]
[2009-07-25 10:10] :: Generating module dependencies
[2009-07-25 10:10] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2009-07-25 10:10] ==> SUCCESS
[2009-07-25 10:10] upgraded kernel26 (2.6.30.1-1 -> 2.6.30.2-1)
[2009-07-25 10:10] upgraded lib32-libgl (7.4.4-1 -> 7.5-1)
[2009-07-25 10:10] upgraded lib32-libpng (1.2.37-1 -> 1.2.38-1)
[2009-07-25 10:10] upgraded lib32-mesa (7.4.4-1 -> 7.5-1)
[2009-07-25 10:10] upgraded lib32-pango (1.24.4-2 -> 1.24.5-1)
[2009-07-25 10:10] upgraded libtool (2.2.6a-2 -> 2.2.6a-3)
[2009-07-25 10:10] upgraded libv4l (0.5.99-1 -> 0.6.0-1)
[2009-07-25 10:10] upgraded lvm2 (2.02.47-2 -> 2.02.48-1)
[2009-07-25 10:10] upgraded mesa (7.4.4-1 -> 7.5-1)
[2009-07-25 10:10] upgraded pango (1.24.4-2 -> 1.24.5-1)
[2009-07-25 10:10] upgraded perl-html-parser (3.60-1 -> 3.61-1)
[2009-07-25 10:10] upgraded perl-libwww (5.825-1 -> 5.829-1)
[2009-07-25 10:10] upgraded qtcurve-gtk2 (0.65.3-1 -> 0.66.0-1)
[2009-07-25 10:10] upgraded qtcurve-kde4 (0.65.4-1 -> 0.66.1-1)
[2009-07-25 10:10] upgraded smplayer (0.6.7-1 -> 0.6.8-1)
[2009-07-25 10:10] upgraded xorg-server (1.6.1.901-3 -> 1.6.2-1)
System Config:
AMD Athlon 64 3000+
Archlinux 2.6.30.2 X86_64
KDE 4.2 Unstable
Nvidia Geforce 6200 Video card
please tell me how to get my desktop back.:)
Last edited by cool (2009-07-30 17:06:32)

Installed the nvidia-beta driver from AUR. version:190.18. it crashed on me.
[code]____________________________________________
Start of NVIDIA bug report log file. Please include this file
when reporting a graphics driver bug via the nV News NVIDIA
Linux forum (see www.nvnews.net) or by sending email to
'[email protected]'.
nvidia-bug-report.sh Version: 3969188
Date: Sat Aug 1 18:50:38 PDT 2009
uname: Linux moody 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64 AMD Athlon(tm) 64 Processor 3000+ AuthenticAMD GNU/Linux
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux moody 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64
Build Date: 18 July 2009 03:49:37PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 1 18:30:08 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(**) Option "AllowEmptyInput" "off"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0xb40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:1:0:0) 10de:00f3:0000:0000 nVidia Corporation NV43 [GeForce 6200] rev 162, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf9000000/16777216, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 190.18 Wed Jul 22 16:35:50 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) NVIDIA dlloader X Driver 190.18 Wed Jul 22 15:47:48 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "RenderAccel" "True"
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1280x1024 +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "TripleBuffer" "True"
(**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
(**) NVIDIA(0): Option "PixmapCacheSize" "300000"
(**) Aug 01 18:30:10 NVIDIA(0): Enabling RENDER acceleration
(II) Aug 01 18:30:10 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Aug 01 18:30:10 NVIDIA(0): enabled.
(II) Aug 01 18:30:12 NVIDIA(0): NVIDIA GPU GeForce 6200 (NV43) at PCI:1:0:0 (GPU-0)
(--) Aug 01 18:30:12 NVIDIA(0): Memory: 131072 kBytes
(--) Aug 01 18:30:12 NVIDIA(0): VideoBIOS: 05.43.02.80.00
(II) Aug 01 18:30:12 NVIDIA(0): Detected AGP rate: 8X
(--) Aug 01 18:30:12 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Aug 01 18:30:12 NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
(--) Aug 01 18:30:12 NVIDIA(0): Samsung SyncMaster (CRT-0)
(--) Aug 01 18:30:12 NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
(II) Aug 01 18:30:12 NVIDIA(0): Assigned Display Device: CRT-0
(II) Aug 01 18:30:12 NVIDIA(0): Validated modes:
(II) Aug 01 18:30:12 NVIDIA(0): "1280x1024+0+0"
(II) Aug 01 18:30:12 NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) Aug 01 18:30:12 NVIDIA(0): DPI set to (104, 113); computed from "UseEdidDpi" X config
(--) Aug 01 18:30:12 NVIDIA(0): option
(==) Aug 01 18:30:12 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(WW) Aug 01 18:30:12 NVIDIA(0): Failed to allocate GLX video capture device array.
(II) Aug 01 18:30:12 NVIDIA(0): Initialized AGP GART.
(II) Aug 01 18:30:12 NVIDIA(0): Setting mode "1280x1024+0+0"
Backtrace:
0: /usr/bin/X(xorg_backtrace+0x26) [0x4ee2e6]
1: /usr/bin/X(xf86SigHandler+0x6f) [0x47b1cf]
2: /lib/libc.so.6 [0x7f4b2a26cf90]
3: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv000988X+0x23) [0x7f4b27067893]
4: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b2702f988]
5: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv001911X+0x2e) [0x7f4b2707975e]
6: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b27075814]
7: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv002497X+0xaa) [0x7f4b27075faa]
8: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv000979X+0x19d) [0x7f4b270503fd]
9: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b2704cf69]
10: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b272a9d88]
11: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b272aa53e]
12: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b2729b0bc]
13: /usr/bin/X(AddScreen+0x1d4) [0x433114]
14: /usr/bin/X(InitOutput+0x76f) [0x46e12f]
15: /usr/bin/X(main+0x1fe) [0x43381e]
16: /lib/libc.so.6(__libc_start_main+0xfd) [0x7f4b2a2599ed]
17: /usr/bin/X [0x432e59]
Fatal server error:
Caught signal 11. Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
/etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder62) Tue Jan 6 09:44:34 PST 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Wed Oct 1 15:12:53 PDT 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "Xinerama" "0"
Option "AllowEmptyInput" "off"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 71.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6200"
Option "NoLogo" "True"
Option "RenderAccel" "True"
Option "TripleBuffer" "True"
Option "BackingStore" "True"
Option "PixmapCacheSize" "300000"
Option "OnDemandVBlankInterrupts" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1280x1024 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
ldd /usr/bin/glxinfo
linux-vdso.so.1 => (0x00007fff7bdff000)
libGL.so.1 => /usr/lib/libGL.so.1 (0x00007f02ea6dc000)
libm.so.6 => /lib/libm.so.6 (0x00007f02ea45a000)
libc.so.6 => /lib/libc.so.6 (0x00007f02ea107000)
libX11.so.6 => /usr/lib/libX11.so.6 (0x00007f02e9dcc000)
libGLcore.so.1 => /usr/lib/libGLcore.so.1 (0x00007f02e89a2000)
libnvidia-tls.so.1 => /usr/lib/libnvidia-tls.so.1 (0x00007f02ea9b8000)
libXext.so.6 => /usr/lib/libXext.so.6 (0x00007f02e8790000)
libdl.so.2 => /lib/libdl.so.2 (0x00007f02e858c000)
/lib/ld-linux-x86-64.so.2 (0x00007f02ea8cb000)
libxcb.so.1 => /usr/lib/libxcb.so.1 (0x00007f02e8370000)
libXau.so.6 => /usr/lib/libXau.so.6 (0x00007f02e816e000)
libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0x00007f02e7f69000)
/usr/sbin/lspci -d "10de:*" -v -xxx
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6200] (rev a2) (prog-if 00 [VGA controller])
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 16
Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (32-bit, prefetchable) [size=256M]
Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at fa000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb
00: de 10 f3 00 07 00 b0 02 a2 00 00 03 00 f8 00 00
10: 00 00 00 f8 08 00 00 e0 00 00 00 f9 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 05 01
40: 00 00 00 00 02 00 30 00 1b 0e 00 ff 02 03 00 1f
50: 00 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 80 00 00 01 04 40 c1 00 00 00 00
a0: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
/usr/sbin/lspci -t
-[0000:00]-+-00.0
+-00.1
+-00.2
+-00.3
+-00.4
+-00.7
+-01.0-[0000:01]----00.0
+-0f.0
+-0f.1
+-10.0
+-10.1
+-10.2
+-10.3
+-10.4
+-11.0
+-11.5
+-12.0
+-18.0
+-18.1
+-18.2
\-18.3
/usr/sbin/dmidecode
# dmidecode 2.10
SMBIOS 2.3 present.
33 structures occupying 998 bytes.
Table at 0x000F0800.
Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: Phoenix Technologies, LTD
Version: 6.00 PG
Release Date: 06/01/2005
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 kB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD
Product Name: MS-7142
Version: 1.00
Serial Number:
UUID: Not Present
Wake-up Type: Power Switch
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD
Product Name: MS-7142
Version: 1.00
Serial Number:
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer:
Type: Desktop
Lock: Not Present
Version:
Serial Number:
Asset Tag:
Boot-up State: Unknown
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
OEM Information: 0x00000000
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: Socket 754
Type: Central Processor
Family: Athlon 64
Manufacturer: AMD
ID: C0 0F 00 00 FF FB 8B 07
Signature: Family 15, Model 12, Stepping 0
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
Version: AMD Athlon(tm) 64 Processor 3000+
Voltage: 1.5 V
External Clock: 200 MHz
Max Speed: 3000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: Socket 754
L1 Cache Handle: 0x0008
L2 Cache Handle: 0x0009
L3 Cache Handle: Not Provided
Serial Number:
Asset Tag:
Part Number:
Handle 0x0005, DMI type 5, 20 bytes
Memory Controller Information
Error Detecting Method: 64-bit ECC
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 4096 MB
Maximum Total Memory Size: 8192 MB
Supported Speeds:
70 ns
60 ns
50 ns
Supported Memory Types:
Standard
DIMM
Memory Module Voltage: 2.9 V
Associated Memory Slots: 2
0x0006
0x0007
Enabled Error Correcting Capabilities: None
Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A0
Bank Connections: None
Current Speed: 5 ns
Type: Unknown EDO
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A1
Bank Connections: 2 3
Current Speed: 5 ns
Type: Unknown EDO
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x0008, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 128 kB
Maximum Size: 128 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0009, DMI type 7, 19 bytes
Cache Information
Socket Designation: External Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 kB
Maximum Size: 512 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PRIMARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SECONDARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: FDD
Internal Connector Type: On Board Floppy
External Reference Designator: Not Specified
External Connector Type: None
Port Type: 8251 FIFO Compatible
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM1
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM2
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LPT1
Internal Connector Type: DB-25 female
External Reference Designator:
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Keyboard
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PS/2 Mouse
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB0
External Connector Type: Other
Port Type: USB
Handle 0x0013, DMI type 9, 13 bytes
System Slot Information
Designation: PCI0
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 1
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0014, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0015, DMI type 9, 13 bytes
System Slot Information
Designation: PCI2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 3
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0016, DMI type 9, 13 bytes
System Slot Information
Designation: PCI3
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 0
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0017, DMI type 9, 13 bytes
System Slot Information
Designation: AGP
Type: 32-bit AGP
Current Usage: In Use
Length: Long
ID: 8
Characteristics:
5.0 V is provided
Handle 0x0018, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 3
n|US|iso8859-1
n|US|iso8859-1
r|CA|iso8859-1
Currently Installed Language: n|US|iso8859-1
Handle 0x0019, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x001A, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0019
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: A0
Bank Locator: Bank0/1
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None
Handle 0x001B, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0019
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: A1
Bank Locator: Bank2/3
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None
Handle 0x001C, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Array Handle: 0x0019
Partition Width: 0
Handle 0x001D, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x001A
Memory Array Mapped Address Handle: 0x001C
Partition Row Position: 1
Handle 0x001E, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x001B
Memory Array Mapped Address Handle: 0x001C
Partition Row Position: 1
Handle 0x001F, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x0020, DMI type 127, 4 bytes
End Of Table
/sbin/modinfo nvidia | grep vermagic
vermagic: 2.6.30-ARCH SMP preempt mod_unload
Scanning kernel log files for NVRM messages:
/var/log/messages is not readable
/var/log/kernel.log:
Aug 1 17:43:55 moody kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.14 Wed May 27 01:23:47 PDT 2009
Aug 1 18:26:08 moody kernel: NVRM: API mismatch: the client has the version 190.18, but
Aug 1 18:26:08 moody kernel: NVRM: this kernel module has the version 185.18.14. Please
Aug 1 18:26:08 moody kernel: NVRM: make sure that this kernel module and all NVIDIA driver
Aug 1 18:26:08 moody kernel: NVRM: components have the same version.
Aug 1 18:27:04 moody kernel: NVRM: API mismatch: the client has the version 190.18, but
Aug 1 18:27:04 moody kernel: NVRM: this kernel module has the version 185.18.14. Please
Aug 1 18:27:04 moody kernel: NVRM: make sure that this kernel module and all NVIDIA driver
Aug 1 18:27:04 moody kernel: NVRM: components have the same version.
Aug 1 18:29:30 moody kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.18 Wed Jul 22 15:36:09 PDT 2009
Aug 1 18:30:12 moody kernel: NVRM: Xid (0001:00): 6, PE0000 0104 00000000 00000000 ffffffff 00000000
Aug 1 18:30:12 moody kernel: NVRM: Xid (0001:00): 6, PE0000 0104 00000000 00000000 ffffffff 00000000
dmesg:
Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.0 20090630 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009
Command line: root=/dev/disk/by-uuid/ee4f81b6-1e0f-4ab9-a1e2-d6109732dbc5 ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
DMI 2.3 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x3fff0 max_arch_pfn = 0x100000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-CFFFF uncachable
D0000-D7FFF write-back
D8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask FFC0000000 write-back
1 base 00F0000000 mask FFF8000000 write-combining
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f400 (usable)
modified: 000000000009f400 - 00000000000a0000 (reserved)
modified: 00000000000f0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000003fff0000 (usable)
modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
modified: 000000003fff3000 - 0000000040000000 (ACPI data)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ffff0000 - 0000000100000000 (reserved)
init_memory_mapping: 0000000000000000-000000003fff0000
0000000000 - 003fe00000 page 2M
003fe00000 - 003fff0000 page 4k
kernel direct mapping tables up to 3fff0000 @ 10000-13000
RAMDISK: 37f00000 - 37fefc8d
ACPI: RSDP 00000000000f6b80 00014 (v00 VIAK8M)
ACPI: RSDT 000000003fff3040 0002C (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 000000003fff30c0 00074 (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 000000003fff3180 04D34 (v01 VIAK8M AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 000000003fff0000 00040
ACPI: APIC 000000003fff7f00 0005A (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
(7 early reservations) ==> bootmem [0000000000 - 003fff0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 000082c0d0] TEXT DATA BSS ==> [0000200000 - 000082c0d0]
#3 [0037f00000 - 0037fefc8d] RAMDISK ==> [0037f00000 - 0037fefc8d]
#4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
#5 [000082d000 - 000082d0b6] BRK ==> [000082d000 - 000082d0b6]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
found SMP MP-table at [ffff8800000f4b80] f4b80
[ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003fff0
On node 0 totalpages: 262015
DMA zone: 56 pages used for memmap
DMA zone: 1680 pages reserved
DMA zone: 2247 pages, LIFO batch:0
DMA32 zone: 3528 pages used for memmap
DMA32 zone: 254504 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 25 pages at ffff88000100a000, static data 72352 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256751
Kernel command line: root=/dev/disk/by-uuid/ee4f81b6-1e0f-4ab9-a1e2-d6109732dbc5 ro
Initializing CPU#0
NR_IRQS:768
PID hash table entries: 4096 (order: 12, 32768 bytes)
Fast TSC calibration using PIT
Detected 1999.604 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
AGP bridge at 00:00:00
Aperture from AGP @ f0000000 old size 32 MB
Aperture from AGP @ f0000000 size 128 MB (APSIZE f20)
Node 0: aperture @ f0000000 size 128 MB
Memory: 1024112k/1048512k available (3409k kernel code, 452k absent, 23372k reserved, 1239k data, 460k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.84 BogoMIPS (lpj=6665346)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
tseg: 0000000000
SMP alternatives: switching to UP code
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20090320
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00
Brought up 1 CPUs
Total of 1 processors activated (4000.84 BogoMIPS).
CPU0 attaching NULL sched-domain.
net_namespace: 1888 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
node 0 link 0: io port [1000, fffff]
TOM: 0000000040000000 aka 1024M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [40000000, ff70ffff]
bus: [00,ff] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [a0000, bffff]
bus: 00 index 2 mmio: [40000000, fcffffffff]
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning (dsobject-0502): Package List length (6) larger than NumElements count (3), truncated
[20090320]
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
pci 0000:00:01.0: supports D1
pci 0000:00:0f.0: reg 10 io port: [0xe000-0xe007]
pci 0000:00:0f.0: reg 14 io port: [0xe100-0xe103]
pci 0000:00:0f.0: reg 18 io port: [0xe200-0xe207]
pci 0000:00:0f.0: reg 1c io port: [0xe300-0xe303]
pci 0000:00:0f.0: reg 20 io port: [0xe400-0xe40f]
pci 0000:00:0f.0: reg 24 io port: [0xe500-0xe5ff]
pci 0000:00:0f.1: reg 20 io port: [0xe600-0xe60f]
pci 0000:00:10.0: reg 20 io port: [0xe700-0xe71f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: reg 20 io port: [0xe800-0xe81f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: reg 20 io port: [0xe900-0xe91f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: reg 20 io port: [0xea00-0xea1f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
pci 0000:00:10.4: reg 10 32bit mmio: [0xfb000000-0xfb0000ff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.5: reg 10 io port: [0xeb00-0xebff]
pci 0000:00:11.5: supports D1 D2
pci 0000:00:12.0: reg 10 io port: [0xec00-0xecff]
pci 0000:00:12.0: reg 14 32bit mmio: [0xfb001000-0xfb0010ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xf8000000-0xf8ffffff]
pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xefffffff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xf9000000-0xf9ffffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfaffffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
PCI: Using ACPI for IRQ routing
pci 0000:00:00.0: BAR 0: can't allocate resource
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: mem resource (0xdcc00-0xdffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp 00:00: mem resource (0x100000-0x3ffeffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved
system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
system 00:02: ioport range 0x4000-0x407f has been reserved
system 00:02: ioport range 0x5000-0x500f has been reserved
system 00:03: ioport range 0xb78-0xb7b has been reserved
system 00:03: ioport range 0xf78-0xf7b has been reserved
system 00:03: ioport range 0xa78-0xa7b has been reserved
system 00:03: ioport range 0xe78-0xe7b has been reserved
system 00:03: ioport range 0xbbc-0xbbf has been reserved
system 00:03: ioport range 0xfbc-0xfbf has been reserved
system 00:03: ioport range 0x4d0-0x4d1 has been reserved
system 00:03: ioport range 0x290-0x297 has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xf8000000-0xfaffffff
pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfaffffff]
pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 959k freed
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1249151352.183:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 2003
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
pci 0000:01:00.0: Boot video device
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 460k freed
Uniform Multi-Platform E-IDE driver
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
via82cxxx 0000:00:0f.1: VIA vt8237 (rev 00) IDE UDMA133
via82cxxx 0000:00:0f.1: IDE controller (0x1106:0x0571 rev 0x06)
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
VIA_IDE 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
via82cxxx 0000:00:0f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xe600-0xe607
ide1: BM-DMA at 0xe608-0xe60f
Probing IDE interface ide0...
Switched to high resolution mode on CPU 0
Probing IDE interface ide1...
hdc: BENQ DVD DD DW1650, ATAPI CD/DVD-ROM drive
hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
SCSI subsystem initialized
libata version 3.00 loaded.
sata_via 0000:00:0f.0: version 2.4
sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
sata_via 0000:00:0f.0: routed to hard irq line 11
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0xe000 ctl 0xe100 bmdma 0xe400 irq 20
ata2: SATA max UDMA/133 cmd 0xe200 ctl 0xe300 bmdma 0xe408 irq 20
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: ST380815AS, 4.AAB, max UDMA/133
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST380815AS 4.AA PQ: 0 ANSI: 5
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ide-cd driver 5.00
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 21, io mem 0xfb000000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>ide-cd: hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e700
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e900
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 21, io base 0x0000ea00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-5: new high speed USB device using ehci_hcd and address 3
usb 1-5: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
usb 2-2: new low speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
udev: starting version 141
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
via-rhine: Broken BIOS detected, avoid_D3 enabled.
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23
eth0: VIA Rhine II at 0x1ec00, 00:11:09:06:18:c6, IRQ 23.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 1 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa02a36a0
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.0.2 (interface 0x000e0000).
VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0447ec0
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
processor ACPI_CPU:00: registered

Windows Media Player for audio on one website does not load?

I have Firefox v8.01, Windows 7 OS. On one of my websites, the Windows Media Player does not load. The audio works on IE9 but not on Firefox. I have used the same code on other sites that work just fine in Firefox, IE and Chrome. I can't fix the problem because I don't know where the problem lies? I have disabled all my Firefox add-ons which provided no solution. The site is http://www.music.articleposts.com This is a blog site and the sound code is in a widget.

Hi Anni,
Welcome to  discussions
Thanks for all the info but I have tried everything and still nothing. I just don't get it.
You're welcome If I may say, you have tried everything is too broad a statement when trying to get help we need to know what you have tried.
Have you tried a freshly created test account? See this doc, on how, if you haven't see this on 10.4 & Adding a new user account to your computer, this helps to show if this is a problem isolated to your username account or system wide.
Do you have the plugin components mentioned?
Are you running 3rd party Safari extending applications?
Has Flip4mac ever worked for you?
Post a Url of the video you are trying to watch, or an example of similar would help, so we may try it.
Can you view Youtube & google vids?
• If those are your correct specs you show your os is extremely behind, missing all the fixes
the subsequent os updates & security updates offer. If they are incorrect please take a sec, to correct, adding the size of drive & ram would help as well
If you update make sure to back up your personal files & data see this document on,How to back up and restore your important Mac OS X 10.3 & 10.4 files
Look at A. Brodys post on how to update properlya. Brody now that 10.4.6 is out lets review..albeit it os 10.4.6 it still applies up to 10.4.10, his is the first post, ( this was the start of the double boot after os update.)
Apologies if you already know all this I can't not know, prefer err on the side of caution.....
• Note that your problem sounds different then the original posters problem, he doesn't speak of freezing, you are running a ppc ibook he a Macbook on 10.4.10.
Please post your own topic & articulate what the "everything" you have tried happens to be, you are more likely to get the help you need, no doubt it must be most
annoying not to be able to view what you know you can.
Good luck,
Eme'~[) / Maria

64-bit driver does not load at boot

Similar Messages

Maybe you are looking for