64 bit HP drivers don't work reliably over a network

Running Win 7 64 bit clients, and server 2008. HP's own drivers are very unreliable. Printers work ok for a while, and then for no reason start outputting garbage. Changing print driver to universal sometimes resolves the issue for a time, but garbage ensues again. Newer Laser printers like p3015dn don't run properly on the drivers supplied on disk, and HP website only provides universal, which only allow single page printing. Has anyone got a solution to this, other than binning all our HP printers (around 60) ? Additionally we have several of the same model, some of which run on the correct drivers, and others that will not, under any circumstance.. It's driving me mad!!!
Pat

Similar Messages

HP Pavilion dv7-6b76eo GPU drivers don't work on Win8.1 and ones for Win7 are older than my grandma

I got
HP Pavilion dv7-6b76eo
i7-2670QM 2.2 GHz
8GB DDR3 1333Mhz
1TB SATA 5400RPM
AMD Radeon HD 6770M - 2 GB GDDR5 out of ~6GB dedicated
Installed the latest version of Win 8.1 + all it's updates + the update 1. So it's as latest as possible. Even installed those Win Updates that MS threatened they will only offer to a certain point it time in May and not later than that. So it's all updated.
However, the GPU drivers don't work. Tried different forums too and even tried those brightness registry fix files, but still to no avail. Will HP ever provide a meaningful GPU driver both for Win7 and Win8? I am saying Win7 too, cos the one offered currently for my HP Pavilion dv7-6b76eo is ridiculously old ....

HP are quiet .. they know they've been lazy ...

HP CM1312MPF drivers don't work via Windows 7 but works fine via Linux dual booting

HP CM1312MPF drivers don't seem work using Windows 7 (64-bit) . Original HP drivers CD now lost. Current drivers were downloaded from HP's website. (This webpage has a number of drivers and most 64-bit ones have been tried. Prior to my Windows re-install, the machine printed and scanned satifactoralily in Windows 7. One day this O/S refused to boot and had to be fully re-installed. The reinstall has been tried on both a SSD and on a HDD. (I have 3 x HDDs and 1 x SSD in this Desktop system. and I dual boot Windows7 and Linux Mint with data on its own HDD.) No attempt has yet been made to scan after this Windows re-install, as I have a separate photo scanner. I mainly wish on the to print on CM1312MPF, however it did scan perfectly well prior to the reinstall of Windows. THE CM1312MPF PRINTS FINE VIA THE SAME USB OUTPUT LEAD (AND POWERED HUB) AS VIA LINUX MINT 17 (PETRA) when I dual boot and without any PHYSICAL CHANGES between changing O/Ss. It must be a driver problem, surely, mustn't it? I look forward to your help. John_of_Penrith

You can also disable that windows wireless "Critter" from device manager and it shouldn't ever again show-up in your adapter list. Thanks for the lesson. I too have wondered about the windows virtual adapter and what it's for. I never had it show-up in my adapters though in the network and sharing center. That was strange that it happened to you. I also occasionally just go to device manager and reload the adapter that came with laptop-not the windows one. It
seems to keep it running fairly well since there have been no new drivers for it. I think it was an experiment or something called the DW1501 Wireless half-mini n that came with my Dell Inspiron N7010 laptop. I don't particularly like it as compared to the other wireless adapters in my home, this thing is slow on downloads, but I don't want to bother to get a new adapter.
Anyhow thanks for the interesting lesson.
LindaSView

Returned array from a method don't work properly over my Servlet

Hi folks,
I show you my code and then explain ;).
        double particle_sys[] = new double[100*5];
     double particle[];
try {
         for(i = 0; i < 10; i++)
          particle_sys[i*5] = 1;
          particle_sys[i*5 + 1] = 0;
          particle_sys[i*5 + 2] = 1;
          particle_sys[i*5 + 3] = 0;
          particle_sys[i*5 + 4] = 0;
     class call = new class();
     particle = call.MyFailingMethod(particle_sys);Now the code for the class which owns the method I call
public class Jfjni
     static
             System.loadLibrary("nativelibrary");
     public native void .........
     public double[] MyFailingMethod(double particle_sys[])
           double particle[] = new double[100*5];
           .... A call to a the native library to recibe the new data of particle_sys ....
         for(int i = 0; i < 10; i++)
          particle[i*5] = particle_sys[i*5];
          particle[i*5 + 1] = particle_sys[i*5 + 1];
          particle[i*5 + 2] = particle_sys[i*5 + 2];
          particle[i*5 + 3] = particle_sys[i*5 + 3];
          particle[i*5 + 4] = particle_sys[i*5 + 4];
          return particle;
}A function in the native code changes the "particle_sys" array, but the returning value stills the same as the original passed to the function.
Because of this, I have tested returning the array, dont works. I have tested also returning a copy of the array in "particle", dont works.
Over standalone app and applet it runs correctly in all different ways, when I try it over a servlet the values of the array stand the same as before the method call.
Please suggestions!
Edited by: bifiado on Jan 15, 2008 10:27 AM
Edited by: bifiado on Jan 15, 2008 10:28 AM

I have partially solutioned this mistake but I have collateral ones. Looks like I forgot to put in web.xml the definition of the class I was calling from the principal servlet class. In other words, I have two classes, one is the extension of Httpservlet and the other (the class that make mistakes) is a class I call to do the JNI work.
Now, I added in web.xml the definition of the JNI class (before I forgot) and looks the mistakes with arrays works, but know the there's a new problem and get an IOexception on the applet that call the servlet. When I coment the JNI calls the exception dissapears and all works ok, but I am not getting any exception report on the tomcat ".out".
Please suggestions.

Appstore suddenly stoped working ONLY over wifi network in which worked before

I have an Ipad 3rd generation woth iOS6 which worked just fine untill today. Appstore suddenly stopped working over Wifi network (my home network). Untill yesterday it wokked just fine over the same Wifi. Anyway, Appstore still works over 3G thought.
I tryed to restart the modem, restarted the iPad ... it didnt work.
Any help is appreciated. thanks.

I have an Ipad 3rd generation woth iOS6 which worked just fine untill today. Appstore suddenly stopped working over Wifi network (my home network). Untill yesterday it wokked just fine over the same Wifi. Anyway, Appstore still works over 3G thought.
I tryed to restart the modem, restarted the iPad ... it didnt work.
Any help is appreciated. thanks.

IPad 2 push notifications don't work on home wifi network

I have a new iPad 2 and I'm trying to use imo.im for instant messaging. however, in most cases, I do not get push notifications for new messages at all, and when they do appear, they are delayed by several minutes. I installed the push test app and am getting the same results. Usually, it will work for a couple minutes if I turn off the wifi and re-enable it on the iPad, but then it stops working again.
I have changed the dns servers on both the ipad and my router to use google's servers, but that still doesn't fix it. Push notifications do seem to work on other wifi networks, so it seems like it's something with my router, but I can't figure out what it is.
Thanks!

I'd like to add one more data point. I tried the exact same tests on my iPhone 4, but did not get the exact same results. First of all, all push notifications work fine on my iPhone using 3G. When I connected to my home wifi network where I experience the problem with my iPad, push notifications worked, but were slightly delayed compared to the 3G connection.
So it seems like the problem is on the iPad when it's connected to this specific network. Also, after using it more, the push notifications seem to come and go randomly, so it's hard to predict when they will stop working.

TV-In drivers don\'t work (GF4400)

Hi!
My Problem is that if i install the latest 1.08 WDM capture Drivers from Nvidia, no TV-In Device is found by my Windows (Win98SE) (Neiter 'New Hardware found', nor does it appear in the Device Manager), so i cannot use the tv-in. I also tried other drivers from the cd, but they didn't work either.
TV-Out works and everything else (xcept tv-in) too.
Thank you,
Zap
PS: I have a PIV 2,4 533FSB + Gigabyte GA-8IEXP + MSI GF4TI4400 VTD

Capture driver
Try this capture driver. Was recommended to me by crAzy_caMel. Worked for me and for Caligula also.
Conect your TV or VCR to PC. Use a video capture program (Vegas Video 3, VirtualDub, Ulead 6, iuVCR etc) and from video source select Video composite in (in case you use RCA and not SVideo). For audio you can select the line in. Try a 384x288 or 352x288 resolution and 25 or 30 fps. In the preview window you should see the image you're about to capture. Now hit any button for capturing (or select video from the menu - or something like that).
I agree to crAzy_caMel: try VirtualDub, it's reliable and simple to use.
Hope it works

Q190 Windows 7 drivers don't work

Just received a pair of Q190s in the post and I immediately imaged them with our office's standard Win7 64 bit image. None of the Windows 7 drivers work. Not one. I ended up going to Realtek's site to get the NIC's driver. Any help would be appreciated.

Hi Gilgamesh1082, welcome to the forum,
exactly what do you mean by "None of the Windows 7 drivers work"; you were able to find and download them but there were problems installing them?
Some drivers require a two stage installation, firstly the driver wil be extracted to a location and then needs to be installed from there. If this were the case with the LAN driver it would have extracted to c:\drivers\Realtek LAN Driver
Did you download them from the Q190 Driver Matrix?
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

V570 video drivers don't work with Windows 7 Home Premium 64

Yesterday I bought a V570 notebook, with an addition Windows 7 Home Premium 64 BIT OEM, since the operating system on it was Free Dos.
I've installed Windows and started to install the drivers from the disk that came with notebook. After I've installed the Intel VGA driver, on boot I got a bluescreen, then the notebook just started to restart. I couldn't get a restore so I had to reinstall windows again. After that I've tryed to use the drivers from the lenovo page, from windows update, all the same result.
So I've downloaded an illegal copy of windows 7 ultimate, just to test it out, and guess what, IT WORKES PERFECTLY FINE! Now I can't and won't use that windows, this is why I paid for an original one, so please someone tell me what can I do to make it work! I was up until 4:15 AM and coulnd't find an answer. There is a national holliday today in Romania, so the guys from the call center are not working today.
Solved!
Go to Solution.

I finnaly resolved it. If anyone else has this issue, here is what you do:
1. install all drivers from the CD, except the ones related to the graphics card
2. install all Windows Updates, except the ones related to the graphics card. You will have to reboot a couple of times, and keep installing until the only updates that remain are related to the graphics card.
3. install the video drivers from the CD
4. ENJOY

Creative ASIO drivers don't work properly with Cubase LE or WaveLab6

It seems that there is some problematic "interaction" between the Creative X-Fi Elite Pro sound card with the ASIO-driver based Audio Creation Mode console (ACMC) and "connected" ASIO applications like WaveLab 6 or Cubase LE.
I was using the SPDIF output from a DVD player. I created a audio PCM wav file at 24 bit/96 kHz with every sample in both left and right channels being identical with alternate bits set in each sample like so:
101010101010101010101010
When I record this SPDIF input stream with X-Fi Elite pro SPDIF-in using the RECORD section of ACMC with Bit-Accurate record mode set, the resultant recorded file is bit for bit identical to the source as expected. Great!
However when I record using Cubase LE and a project with 96 kHz sampling rate in a stereo channel with only the ASIO SPDIF L and R channels enabled, (keeping the ACMC with identical settings in the backgroun) the resultant wave file has lots of "noise" in the lowest 8 bits or so, almost like it was dithered. The same thing happens when I record using WaveLab 6.
So this seems to mean that somehow Creative's use of the ASIO driver in ACMC is not "sharing" the ASIO input bus signal properly with ASIO apps like CubaseLE and WaveLab6. For sure, the 24 bit audio recorded by Cubase or WaveLab6 is not "bit accurate" to the SPDIF input signal. I wonder what this means for the accuracy of details in recordings made with Cubase LE or WaveLab via Creative's ASIO driver??

GI've had enough of this creative broken windows 7 drivers issue...
selling my xtremegamer and buying an asus xonar dx card, hopefully that works fine. asus seems to at least update their drivers on a regular basis. I mean, the latest win 7 creative drivers are from '09...

Equium M40X: WLan card drivers don't work

Hello,
I just installed fresh WXP and I can't find wireless drivers in internet. I found 3 or 4 drivers but the device is still not working.
Any idea where to look or what to do?
Cheers,
Bilas

What do you mean with still not working?
Can you see the WLan card if you enter the device manager?
Are there any yellow exclamation marks near to the WLan card?
Usually on the Toshiba driver page you should find all necessary drivers also the WLan card drivers. I cant believe that this driver doesnt work.

Drivers don't work for me.

I just installed Vista this morning, and the first thing I did was download the drivers for my Sound Blaster X-Fi XtremeMusic. At first, I wasn't even able to get Windows to recognize the sound card as a Creative SB X-Fi card, but that has since been resolved. Now, I have the drivers installed, and Windows recognizes the card, but I am unable to get any sound out of it. I have already checked all of my connections, and they all work. If I boot into WinXP on my other hard dri've, my sound works just fine. The biggest thing is in the device properties where you can test the "Supported Formats". I tested each Encoding Format, and each Sample Rate, and all of them returned the error message, "Windows was unable to play the test tone."
Please please PLEASE let me know if you had this problem before and how to resolve it...
Thanks!

I use an audio-jack mic, not USB... and I do believe the card is set to defualt, judging by the fact that it's the only audio device installed... but I'm booted into my XP Hard Dri've right now, and I'm too lazy to go check, lol...
Also... I did notice that my Sound Card is not listed in the "Recording Devices" / "Input Devices" / something along those lines.... and I can't figure out how to put it there...Message Edited by ThePope on 04-05-200702:57 PM

ModBus Varibles don't work until over VarMan

Hi everyone,
I have a .vi that uses global varibles linked to modbus channels. The .vi wont work untill I open up the Varibles Manager. Once the Varibles Manager is loaded, the .vi starts working. Does anybody have any ideas on why this might work this way and how to correct it so that I don't have to open up the Varibles Manager evertime?
Thanks for any input,
Matt

Hi Matt,
I'm assuming you're working with LabVIEW 8.0, but please correct me if
I'm wrong. Also, it is useful to know how your variables are
linked to the Modbus channels. Are they shared variables with the
'bind to source' option chosen, are they linked on the front panel via
DataSocket, etc?
Typically, we would have a set of shared variables in a project library
bound to the ModBus items. We can set options for the project
library containing the variables by right-clicking on the library and
choosing the "Autodeploy Variables" option to ensure that you do not
have to manually deploy the variables for use in your VI. Make
sure that you have this setting selected for each variable library and
that you have all of the shared variables you wish to communicate with
included in your project.
Cheers,
Matt Pollock
National Instruments

Alerts don't work reliably

When setting alerts for email, they don't always work. One in particular would test once but then would not test (using "TRY") again. It NEVER went off when email was received, regardless of holster status. I tried enabling it while in the holster but that didn't work either.
I finally changed to a different alert and that works SOME of the time.
Non-determinism is not a property to be desired when using a Blackberry.

Hi,
If it does sometimes and not others I would presume is problem with the speakerphone in the BB. Probably a bad connectiona nd that's why it rings sometimes.
Peace,
BBTechSupport
Don't forget to CLICK that BLACK or GRAY Kudos square if some one was helpful.
Also please mark it as a solution if your problem is solved.

Track ball drivers don't work with Lion

My Kensington Turbo Mouse won't work properly with Lion.
The Kensington web site no longer recognises the product, and it is only 3 years old!

Try third-party drivers as well
www.boastr.de/
www.plentycom.jp/en/steermouse
www.usboverdrive.com

64 bit HP drivers don't work reliably over a network

Similar Messages

Maybe you are looking for