64-bit installation problems

I am attempting to install Oracle 10g on a 64-bit Linux. I am having errors on the linking stage starting with:
genclntsh: Failed to link libclntsh.so.10.1
I have tried numerous solutions such as wrapper scripts for gcc and ld to link in 32-bit mode but nothing seems to work. I'm pretty sure I have the correct pre-requisite RPMs installed.
I don't know if it's something in my environment variables that are wrong but I have the install completed on another system and the .bash_profile looks the same.
Any help would be greatly appreciated.

What's the o/p of uname -aWhat is the s/w bundle number. will be something like B....
Please post the complete error message, there should be some more errors associated with the one posted earlier.
If you wanna redo the whole installation...
Clean up the failed installation as per
Removing 10g Database and Software from AIX, HP-UX, Linux, Sun and Tru64 Platforms
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=275493.1
And follow the installation instructions as per note posted by "yingkuan"
Or
Check the below note, for the appropriate reference link to your requirement.
Linux x86, x86-64, and s390x Requirements Reference List
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=401705.1

Similar Messages

Solution? CS 3/Windows 7- 64 bit installation problem

I found an answer for at least one of the MAJOR issues installing CS3 on Windows 7-64 bit ...
The problem: CS3 installation goes smoothly, but when trying to open Photoshop, you get a blank Photoshop window and an endlessly spinning curser. Also, no other programs will open, yet if you check the program files, they seem complete. You may even discover that one of the non-working programs is actually open (but not accessible to you) somewhere in the depths of your computer. An error message may eventually appear (if you are lucky), which reads something to the effect: "You cannot use this product at this time. You must repair this product by uninstalling and then reinstalling this product or contact your IT Administrator or Adobe Customer Support for help."
Check this link for the solution, which worked for me after four weeks of frustration and three Adobe problem tickets that were declared closed without resolution of this problem:
http://www.megaleecher.net/Flexnet_Licensing_Service
Short form is that the Flexnet licensing feature for Windows 7 is not set properly and prevents CS3 from registration/activation. It must read "start" and "automatic" - not "stop" and/or "manual." You get to Flexnet Licensing as follows: Start Menu>Run> (type in) services.msc>enter
Then double click FlexnetLic in the menu, change the Stop to Start (by clicking on the word) and the Manual to Automatic. Click save. Restart computer and launch any CS3 program. This should bring up the rest of the installation process beginnning where you enter your serial number(s). From that time on, for me, everything was operational and still is (Whoopee!!!!!!)
Side Note to Adobe: When I first encountered this problem FOUR weeks ago, I talked three different times with Technical Assistance personnel. The second of these three could have solved the problem - he had the right information, as I can now see. The problem: I could NOT understand his English. His accent was very heavy and the phone connection was terrible. He struggled as I did with such simple things as the word "start" where he had to literally spell it out four times before I understood what he was saying. We eventually got to the Flexnet screen and possibly could have solved the issue right then. But the communication process was so labored that it didn't work. I'm guessing now that a step was missed somewhere, because now all is okey dokey, after using the information in the above link.

Pat, thank you for your very prompt response.
Regarding my FLF files I will try the VLC Media Player as you suggested, thank you.
Now regarding the Flash Player being a browser add on in my IE, I checked through Tools / Manage add-ons / All Add-ons and it displays only Adobe Shockwave Object from the Adobe range of products. Adobe Flash Player is not an Add-on in my system.
By uninstalling it (when I was trying to install a standalone product), did I delete this Add-on from the available Add-ons from my IE?
And if I did that, how do I reinstate it? (As you said a standalone Flash Player would have its limitations).
I would appreciate your advice.

CS-4 Vista 64 Bit Installation problems - "checking system profile...."

Hello All:
I know that this has been discussed in the past, but I was hoping that perhaps someone has determined a fix for the following problem.
Background: In the past, with Windows XP Professional, I never had problems with loading any Adobe products. But just last week I reluctantly upgraded to Windows Vista Home Premium because it came with a new power system PC that I purchased (AMD quad-core 2.4 gHz Phenom CPU, 8 Gigs of RAM and 1 TB HD) and this is where my problems began:
Nature of problem: I loaded the latest versions of Lightroom and Adobe Elements just fine - absolutely no problems there. But when I tried to load my Photoshop CS-4 upgrade disk, it never gets past the "checking system profile" bar at the very beginning of the install process. I mean to say that you initially get the install window and when you click "install," a small window comes up which indicates "checking system profile." Then the progress indicator goes all the way to the right - around 90% to the right but then just hangs there - and I mean stays there...period. I tried this several times, eventually having to use control/ALT/Delete in each instance to get it to stop. I even let it stay there for over 6 hours - all to no avail. What I found interesting is that just about all of my older programs - even those dating back to 2001 - all installed without a problem at all.
2. Actions I took to try and correct this:
    a. Then, in my attempt to find fixes for this, I made sure to close out any background programs that were running (and Vista has a million of 'em), to include Firewall, Windows Defender, any other malware and anti-virus programs, not to mention a bunch of smaller programs that have items running in the background. Then I tried loading CS-4 again....but still no go, the "checking system profile" indicator just hangs at 90% complete. Note that at no time did the install process ever load any files at all - I checked everything to ensure this wasn't the case, otherwise I would have removed them.
    b. On my next try, I then I copied all of the files from the CD to a folder on my desktop and tried to run the program from there - still no go as the "checking system profile" window still hangs at 90% I even tried loading the program by right clicking on the exe file and installing "as administrator," but that didn't do the trick either.
    c. Then I rebooted into safe mode, trying both to load the programs first from the CD and then from the desktop folder - still no go, but in this case it told me right up front that the action was unable to be completed. I assumed this meant that in Windows Safe Mode, the installer was not available.
Help Needed: So folks, I know this has been discussed in the past, but I don't know of any fixes that are available. Can anybody help me through this process? You can also send me direct emails at: [email protected] - which means I'd get them right away.
This has been driving me up a wall because some other folks with Vista 64 Bit systems report that they had no problems with installation. Again - it never makes it to installation, but gets hung up at the "checking system profile" stage.
Argggggggg......
Thanks,
Ben Herrmann
Fuquay-Varina, North Carolina

I believe you are falling victim to some known incombatibility of LR vs. PS CS4 installer. This should be covered in the knowledge base, so check there. A short way to happiness may be using the CS4 Clean Utility to remove the debris from the failed installs and unregister other Adobe installs, then install PS CS4, but since I don't use LR and never have tried this, I'm not sure if this specific case is covered.
Mylenium

CS4 64-bit Installation Problems

I'm installing PS CS4 on Visat 64-bit. The first time I tried installing it the setup stopped when it was loading the Language pack for Device Central. I started the installation over again and removed Device central from the install and then started it again. This time it got almost to the end of install but it then stopped again when it was trying to install the Photoshop CS4 English Language Pack_x64.
Has anyone else loading CS4 had this problem in Vista 64-bit?

Ryan: I feel your pain, after just purchasing CS4 and attempting to install it on my perfectly set up XP x64 system only to find that CS4 was not supported on XP 64bit *sigh* I was reluctantly forced to reformat and switch to Vista (x64)..only to have the exact same problem you are having.
The installer somewhat works as when you install programs individually...eventually you can get what you need installed. However, this is only after running the installer 6 different times to install one app at a time (the installer crashes each time).
The installer crashes at installing "CS4 English Language Pack_x64".
I am installing on a fresh Vista x64 installation on a Mac Pro, all drivers installed properly.

Vista Ultimate: 64-bit Installation Problem

Ok so I'm trying to install vista ultimate 64 bit, and when boot camp tells me to insert the disk, I did, then It restarted and when booting, it came to a black screen with white text saying:
1.
2.
*+Select cdrom boot type:+*
The problem here is that I can't type a darn thing! They keyboard doesn't do anything at all, and not even plugging in a usb keyboard worked.
For those who will ask, yes, I have a genuine copy of Vista Ultimate 64-bit which includes a 32 bit version, but I'd rather NOT use the 32 bit one, because hey, I've paid for the one with 64 for a reason.
Does anybody know what to do here? Is there a fix or am I screwed?

Microsoft, Apple and Intel belong to the EFI group. That isn't to say that they implement the same. Some Macs have EFI64 (2.x, UEFI), some have EFI32 (1.x).
http://www.intel.com/technology/efi/
http://sourceforge.net/projects/ELILO*/
http://www.microsoft.com/whdc/system/platform/firmware/default.mspx
These are Macs that have gotten Apple's 'blessing'
http://support.apple.com/kb/HT1846
http://forums.macrumors.com/archive/index.php/t-467704.html
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2731677&SiteID=1

Oracle 10g for Solaris 9 (SPARC 64-bit) installation problem

I am trying to install Oracle Database 10g that I downloaded to my Solaris 9 (64-bit) SunBalde 100 and I got an error when it was running the Database Configuration Assistant. The error that I got is "ORA-12154: TNS: could not resolve the connect identifier specified".
The machine has 768 MB memory and at least 15 GB free hard disk space. I have also followed all the steps in the installation guide and installed all the required OS patches.
Please help.

be sure to set your environment correctly.
Sounds like your didn't set the environment variable ORACLE_SID
Check all your settings, e.g. ORACLE_HOME, PATH, LD_LIBRARY_PATH and ORACLE_SID and try again

Windows 7 32 bit installation problem

My Lenovo g50-30 with pentium n3530 inside shows bluescreen while & after installing Windows 7 32 bit. This type of system refuses to load despite all effort and reboots . The notebook is new, it contained freeDOS originally. BIOS update doesn't help, since it can only be made directly in OC. Help required. Ideas fail me.

I had similar issues from time to time with Windows Vista / 7 - usually worked after I disabled the onboard COM and Parallel ports.
Good to know yours is working now.

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Lightroom 3.2 Installation Problem on Windows 7 64-bit

Lightroom 3.2 Installation Problem on Windows 7 64-bit
I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
While copying the extracted program files the following error message appears:
An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
I found out that other users had the same problem, and couldn't find a solution.
Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
Thanks for ideas to solve the problem.

Thanks for your advice, Mr. McLion.
I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition

Hello all,
I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
Now i tried to deinstall it and again go for 11g. But even the same story here..
Can anybody give me a solution for this..
-Regards
Rajesh Menon

Saqib Alam wrote:
i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
ur problem is that u install latest version and now u trying to installing old version.
now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
install fresh windows 7.
Regards
SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
Stop all Oracle services
In the registery:
- Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
- Delete the entire Oralce folder from HKLM\Software
reboot
Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
reboot

Satellite L750 - drivers installation problem

Hello good people of the internet,
I have a problem with drivers' updates/installation on my Satellite L750-1E3, Windows 7-64 bit.
When I launch the installer, it decompresses, telling me it will launch afterwards, but then the window closes and nothing further happens.
I've read about the same problem one person here had with the L855-10P series but, maybe because I'm a girl or maybe because I'm not a native English speaker, I didn't uderstand what to do...
I actually have problem with more things.
My webcam stopped working, when I try to launch it I get the error message that tells me "the initialization went wrong, restart your webcam or computer".
So I tried to reinstall the driver but the problem I described above appeared.
The same driver installation problem appeared when Tempro told me to update my blu-ray driver (I download all the drivers from eu.computers.toshiba-europe.com).
And the last one, for about a month there are problems with the sound on my notebook.
First cracking of sound and then it stops working completely and I have to restart the computer.
Again, I tried to reinstall the sound drivers.
There are two drivers on the Toshiba site, one of them reinstalled just fine but the other one (nvidia, I think) had the same problem as the other drivers.
Someone please tell me what to do, because I am becaoming really desperate and I seriously considered throwing my notebook out of the window.
Thank you

Usually the HDD recovery is the easiest to get the notebooks factory settings and to get it running again.
>My webcam stopped working, when I try to launch it I get the error message that tells me "the initialization went wrong, restart your webcam or computer". So I tried to reinstall the driver but the problem I described above appeared..
Its interesting to know if the webcam or an unknown imagine device (probably webcam) appear in device manager. Please check this.
If the webcam isnt listed there, you should check if the webcam is enabled in BIOS.
To access the BIOS press F2. Then go to Advanced tab -> System configuration -> webcam
If the webcam is enabled in BIOS but still not recognized and not listed in device manager, then you should recover the notebook to factory setting to check if the webcam module isnt faulty.
>The same driver installation problem appeared when Tempro told me to update my blu-ray driver (I download all the drivers from eu.computers.toshiba-europe.com).
The Blu-ray player update works only for notebook equipped with blu-ray drive. If your notebook does not support blu-ray drive

Itunes 64 bit on windows 7 is unable to install, i have the 64 bit installer version but it keeps saying "errors occurred" at the ( rolling back ) phase. HELP!

itunes 64 bit on windows 7 is unable to install, i have the 64 bit installer version but it keeps saying "errors occurred" at the ( rolling back ) phase. HELP!!!

I have the answer and this might be useful for any one else wondering about this in the future. If it helped you or explained what you wanted to know. Replay to the post pls
It's quite easy actually. First have your "iTunes Library Extras", "iTunes Library Genius", "iTunes Library", and "iTunes Music Library" backed up. Download ans install iTunes 64-bit. I don't know what's so 64-bit about iTunes 64 since Win7 reports it as a 32-bit application in the task manager. But anyway. Install iTunes 64 and launch it. If you migrated your library to another drive like me go to settings in iTunes and change the directory to your location. Close iTunes. Replace the newly created files with your backed up files. Launch iTunes. iTunes will load and then update your library and from there you are set to go! so basically it is just like a normal upgrade. But if you hesitated to go from 32 to 64 like me, here is your answer.
By the way. I'm using Windows 7 64-bit with iTunes 64-bit and it works without problems and syncing with my iPod Touch also works flawlessly.

Windows 7 64 bit installation freeze because of disk

Problem is a freeze during Windows 7 64 bit installation loading disk.sys when booting in UEFI mode.
According to Intel online support "Windows 7 Setup has a problem detecting the Toshiba SSD" (https://communities.intel.com/message/206067)
Disk Drive
ATA TOSHIBA THNSNH25 SCSI Disk Device (238 GB)
Is there anything to do about Windows 7 Setup ?

See this post covering your subject and a solution here : http://forums.toshiba.com/t5/Satellite-Laptops-all-other/UEFI-prevents-Win7-install-on-new-SSD/m-p/4...
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Can you download a 32 bit installer for photoshop elements 12 to install on a 64 bit system (windows 7)

can you download a 32 bit installer for Photoshop elements 12 to install on a 64 bit system (windows 7). Thanks in advance

yes, if you follow all 7 steps you can directly download a trial here: Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

64 Bit Installer says it's made for 32 bit and tells me to install 64 bit

I used PC Mover to clone my previous XP laptop so the version of iTunes wasn't really made for the 64-bit OS of my new laptop and hasn't worked since. I try every couple of months to fix the problem before giving up out of pure exhaustion! I download the new 10.1 for 64 bit operating systems and during install it tells me that this installer is for 32 bit systems and I need to install the 64 bit installer!!! Nothing works!!! Does anyone have a clue how to make iTunes work again or where I can get a 64 bit installer that my computer will recognize as a 64 bit installer???

I download the new 10.1 for 64 bit operating systems and during install it tells me that this installer is for 32 bit systems and I need to install the 64 bit installer!!!
Yeah, it's actually the 32-bit version that PC Mover has wedged into the new 64-bit PC that is returning that 32-bit message. (When you try to install the later version, the installer tries to remove the previous version which suddenly realises it is on a 64-bit system, and everything turns to custard.)
In the best of all possible worlds, I'd prefer to remove the 32-bit iTunes by undoing the migrstion (using the PC Mover undo function). Unfortunately, my understanding is that you can only completely undo the entire migration.
If you aren't keen on that, there's an alternate strategy described in the following post:
http://discussions.apple.com/thread.jspa?messageID=12712585&#12712585
You may not need to search for a copy of Windows Installer CleanUp. In his/her reply to that post cmcmd reports:
Fantastic! I contacted PC Mover and they sent me a link to the Microsoft Clean Up utility. I deleted all of the Apple files, installed teh 64 bit iTunes and all appears to be working.
So you could perhaps try your luck with PC Mover too. Fingers crossed the support person you get through to will also have the link to the CleanUp download.

64-bit installation problems

Similar Messages

Maybe you are looking for