64-bit iOS ANE Update

While we work on getting our ANE's updated in the Gaming SDK, we wanted to make sure you had access to the iOS universal versions as soon as possible. You can download these via the link below and I'll add them to a new blog post tomorrow for those that don't visit the forums.
64bit iOS Compatible ANE
This zip contains the following:
gameCenter.ane
productStore.ane
Social.ane
stageAd.ane

Hi
We have now re-packaged all the 3 ANEs namely NetworkInfo, Vibration, Gyroscope with 64-bit universal support now. This in addition to the Gaming SDK ANEs which we had shared earlier.
The updated ANEs can be downloaded from the respective devnet articles mentioned below:
http://www.adobe.com/devnet/air/native-extensions-for-air/extensions/networkinfo.html
http://www.adobe.com/devnet/air/native-extensions-for-air/extensions/vibration.html
http://www.adobe.com/devnet/air/native-extensions-for-air/extensions/gyroscope.html
Regards
Abhinav

Similar Messages

I have an ipad 4 running ios 7 but i noticed ios 7 on my ipad seems laggy. I already did a factory reset but it seems doesn't change a bit. Are there any solution for this or I need to wait for the next ios 7 update?

Am I the only one who facing this problem or there someone else. I did a factory reset yesterday but it still laggy. Do I need to wait for the next ios 7 update or what?

Hi Amish,
I should have mentioned that I have signed out of the iCloud Control Panel several times and no syncing occurs.
Thanks for your response anyway. I appreciate your feedback.

IOS ane in gaming 1.4 is not support AIR16 beta

iOS ane in gaming 1.4 is not support AIR16 beta, when gaming will updata and fix this error?

Thanks for reminding us. With AIR 16's support for iOS 64bit, all ANE's will need to be made with universal binary support (32 and 64 bit). We'll work on getting the Gaming SDK samples updated accordingly.
Thanks,
Chris

After ios 8 update has anyones ipad started randomly selecting everything? Even after ios 8.0.1 update it has still continued to do the same thing.

After ios 8 update has anyones ipad started randomly selecting everything? Even after ios 8.0.1 update it has still continued to do the same thing making it immpossible to use ipad anymore. Has anyone had the same problem and/or knows how to fix this?

Try a Reboot pess & hold power button & menu button hold both down until you see Apple Logo you will not lose any data This may help but the ipad 2 is a bit under powered for iOS 8 If you can a very good buy now is the iPad Air 32G Since they brought the new one out the price for this model Has come down by £120.00 That's the one I am using and it works great on iOS 8.1 Bsydd uk

ITunes has a problem finding my iPhone on wifi after iOS 6 update

Since updating to iOS 6 on Thursday, I've been having problems with iTunes not finding my iPhone on wifi. I'm not having this problem with my iPad, which is first gen so no iOS update. Sometimes the phone will show up on the list when I start iTunes, most of the time it won't. I am also getting repeated pop-ups from Windows telling me that "ATH.exe has stopped working". The pop up shows up even after I click the button for "Close Program". I've tried stopping and starting the Apple Mobile Device Service. This led to the phone showing up on the list but the pop up frequency has actually now increased (not that that's necessarily related).
I do not have problems with the phone showing up in the list or syncing the phone when it's physically connected - it works exactly the way it's supposed to if it's plugged in. And I can deal with having to plug it in to sync if I have to but these constant popups are starting to drive me batty and I don't want to have to deal with them until the new iTunes comes out next month (assuming the new version will fix whatever the problem is anyway).
I am running Windows Vista 32-bit, iTunes 10.7.0.21, iPhone 3GS.

I've got the 4S and I see you have the 3GS; this isn't a device issue evidently since your post is the first that I see is NOT a newer device. I'm in total agreement on your post as well - there is absolutely no rhyme nor reason for all this and the pop-up is to the point of syncing via the cable is worth NOT having this "ATH.exe" error.
Further I have uninstalled and reinstalled everything, as per all the support forums, yet to sync via WiFi, I have to stop and start the Apple Device Service countless times. As I stated earlier, by the time I start/restart the services, it's just easier to throw it on the cable and call it a day....
One would think, by now, that Apple would be on this however I hve yet to see an Apple post as to a resolution. I suppose we will just go batty together!!! If I hear or find anything, I'll hunt down this post and post the info I've found. Thank you for reporting this so Apple realizes we're not losing our minds nor is it a Vista/Windows issue. iTunes10.7.0.21 is being used & this only started after the iOS 6 update... GRRR!!!!

Greyed out songs on iphone after iOS 5 update

So I updated my iPhone 4 for the iOS 5 update. Before doing mine I did my husbands iPhone 4. My update seems to have been successful but all my songs are greyed out, however they're fine on his phone. It did prompt me to change our applie ID when we set up his phone so we did that. We're both signed into the same apple ID (just like we were before the update), and I just can't figure out whats going on. HELP!!

I had a similar problem with songs greyed out and not syncing and apps not syncing either. I also tried multiple restarts and redownloading iOS5 etc. The one thing which seems to have sorted it out for me is buying a (free) app from the app store on my iphone and then syncing with itunes. Oddly enough this seems to have woken itunes up to the fact that stuff wasn't synced and started the process of a full sync.
A bit random and i read this on another thread, but it worked for me.

IPod touch version 4.2.1 have a iOS 5 update?

I am getting a little annoyed when I try to download new games/apps and it says that my ipod is not compatible. I have been fishing around the site for a little bit and it says that the iOS 5 update is compatible with 3rd and 4th generation ipod touches... I'm pretty tech savvy, but I don't really know how to tell if an ipod is a 3rd or 4th generation. I went into the information on my pod however, and it says the verison is 4.2.1.... so basically, is my compatible with the update? Everytime I plug it into my laptop it says that everything is up to day... so I am thinking no which irritates me because I've only had it a few years.
Anyway, if anyone can help me out that would be great.
Thanks.

Hold on! That's not quite correct. I have a Touch 32gb that's 2nd generation (thanks for pointing out the 2 model numbers, btw). I suspect it's the largest capacity 2nd generation Touch, but Apple certainly made them. My biggest regret is that you can't upgrade it to 4.3 REGARDLESS of the iTunes version you're using. I have iTunes 10.7, and it gives the same message: your software is up to date.
It'll still accept lots of apps (and of course is a good player). But the bummer is no-Cloud access. With my 4th generation Touch 8g, I can download tunes from either my Apple or Amazon Cloud wherrever I happen to be. With a Touch 2G (4.2.1), on the other hand, it's beginning to feel like an older NON-touch Touch--a Classic or a Nano. I guess I was fortunate to go with the large capacity, since I'm always limited to whatever tunes are already in the Touch. The Apple trade-in and buy-back places are offering no more than 50 bucks even for a Touch that's 32 GBs, so it's hard to justify selling it at that price.

IOS 7 Update Stalling

I have an iPad 2.
I downloaded & installed the iOS 7 update.
It took a little more than an hour.
Then it says: UPDATE WILL INSTALL IN 5... 4... 3... etc.
Then it says: VERIFYING UPDATE
Then it says:
SOFTWARE UPDATE UNAVAILABLE-Software Update is unavailable at this time.
Try again later-OK.
This has happened FIVE TIMES IN A ROW, now.
*** is going on?

... annnd of course AS SOON AS I open my big yap, the verification process went through,
and after about 15 minutes or so, iOS 7 is now on my iPad 2!!
In fact, I'm writing this right now on it, and I must say it looks absolutely GORGEOUS!
It really is just like having a new iPad!
I cannot for the life of me see what all of the moaning & the complaining by the
so-called "pundits" is based on.
Mr. Ive's done a superbly marvelous job!
And to all in the same boat as me: they're right -- it's gonna take a few minutes.
But, eventually, it WILL download!
And it should go a little bit faster now, since I'm off the list! lol

Imessaging doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

imessaging on ipod touch doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

Short of a reset to factory settings I've found making sure iMessaging is not left minimised helps. It doesn't seem to keep its connection. So, by closing after each use this helps. I've been doing this since I logged out of iMessaging at least 1/2 doz times and even changed my apple id pw as this had ceased to be recognised. I get fewer send failures now and don't have an inactive send button so much. Having said this its all a bit of a work around as iMessaging isn't behaving as it once did. If over time not resolved will do factory reset. All the best.

I have two rotating arrows at the top of my screen next to the 3G symbol. Does anyone know how to turn this off b/c it is using all of my battery life? This started after the iOS 5 update.

I have two rotating arrows at the top of my screen next to the 3G symbol. This happened after the iOS 5 update. Does anyone know what it is and how I get it off, it is draining my battery?

At first read, I also thought it sounded a bit snide. Who here has read the entire manual before going to the web for a quick search? (Not me, and in fact, I found my answer - to this very question, by reading this post WAY faster than if I had read the manual. What is so wrong with that?)
That is the beauty of having support forums. If it is a bother to answer, without being snide, one is not obligated to do so. And my apologies if he was not being snide... but there maybe a better way to point out the manual, such as "I have included a link to the searchable manual which may be of assistance to you next time you are puzzled by your iPhone's behaviour".
Just my 2¢.

Facebook app deadly slow, wifi slow, app downloading deadly slow, app crashes enormously, and maps too slow after iOS 6 update

I have a 3rd Gen Ipad Wifi, and it worked like a charm from the day I bought to the time before the update. All the problems started after iOS 6 update. Especially Facebook app is like a using dial up connection with the slowest possible speed. After the update, it became just a little bit faster, but still cant even open photos, and video. Google Chrome crashes often, the game download beame dead slow. Has any been experiencing similar things??????

More memory will help because:
processes killed due to memory pressure
Uninstall:
- Omnibar [Adware! - Remove]
- Slick Savings [Adware! - Remove]
Click on the Remove in your results from EtreCheck
- TuneupMyMac UNKNOWN (missing value). Go to developer's site for how to uninstall
- uTorrent
nnn

IOS Software Update - No Notification or Automatic Download

As of today, it has been 11 days since iOS 8.2 has been released and I still have not received an iOS Software Update Notification on my iPhone 6 Plus nor has iOS 8.2 automatically downloaded like it had on my other iOS devices. I knew iOS 8.2 was out, but, I like to wait a bit to install just in case bugs are revealed by early adopters. I had to manually check for the iOS 8.2 Update on my 6 Plus.
So, I'm curious why I did not receive an iOS Software Update Notification/Automatic Download? I have noticed previously, on other iOS devices, that the number of days between and an iOS release and the iOS Software Update Notification/Automatic Download is not consistent. I understand that you have to be connected to a power source and on wifi for this feature, which obviously is one variable, but, 11 days??? The 6 plus battery life IS AWESOME, but, not that awesome. I have definitely charged my phone and have been on wifi a couple of times since the iOS 8.2 release.
Any ideas? Just curious.
Thank you.

These are all carrier feature, call your phone carrier to resolve the issue.

IChat not working since iOS 5 update

My iChat is not working since the iOS 5 update. Everytime I go to log in it says: "iChat can not communicate with the AIM account..." Is anyone else having a problem since the new update was released?

Hi Chris,
Does it read login.oscar.aol.com in the server Setting tab ?
(iChat Menu > Preferences > Accounts > Server Settings)
Hi bryanfromcottonwood,
In Previous versions iChat was set up to automatically change the Server Name fro AIM logins when starting or turning Off SSL. (it tended to look like the leading "s" appeared or disappeared).
IT Changed from login.oscar.aol.com to slogin.oscar.aol.com
There are suggestions that this does not happen now.
It is not known if this is done deliberately for "Security" or an error in the Update file.
6:57 PM Friday; October 14, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How can I retrieve the temporary backup which is done just before ios 5 update?

How can I retrieve the temporary backup which is done just before ios 5 update? Because I set up wrongly as new iphone and want to retrive the backup before the ios 5 update. But I never sync to itune before. When I find the previous backups, I can find only one backup which is done after ios 5 update.

I've never faced this case myself, but from the documentation it would seem that the INSTEAD OF DELETE is also a FOR EACH ROW trigger. Therefore, you don't really have to worry about the actual "where" clause of the original "delete" operation: Oracle has it all parsed for you, so you just need to redirect, in turn, each view record being deleted to the appropriate table.
In extenso: for your
delete vt12 where m = 1;
=> the INSTEAD OF trigger fires once for all records in vt12 where m=1, and I would guess that you trigger code should look like:
begin
delete from t1 where m = :old.m and n = :old.n and o = :old.o;
delete from t2 where a = :old.m and b = :old.n and c = :old.o;
end;
It's a bit of overkill compared to the "where" clause of the original "delete" statement, but it should do the job...
BTW, if by any luck you do have some primary key on tables t1 and t2 (say: columns o and c respectively), then obviously you can make the thing simpler:
begin
delete from t1 where o = :old.o;
delete from t2 where c = :old.o;
end;
HTH - Didier

Ios 5 Update New Features says that iCal now has a week view for iPhone but after updating last weekend, I don't see any week view--just List, Day and Month..How do I get the week view?

ios 5 Update New Features says that calendar now has a week view but after updating my iPhone 4 last weekend, I don't see any week view for iCal--just List, Day and Month as in the past. Is the weekly view available for iCal and if so, how do I access it?

Rotate your phone to landscape.

64-bit iOS ANE Update

Similar Messages

Maybe you are looking for