64-bit link error, What does this mean?

When building fortran code with the -xarch=v9 option I get an error stating
"cannot find /opt/SUNWspro/prod/lib/v9/crti.o ........."
Is this simply a PATH problem or do I need to install something else ?
I am using SunStudio 9 on a Sunfire 480R with Solaris 9.
Any help appreciated
Richard

Is your compiler installed in the default location? The linker appears to be looking for the v9 startup code in the usual place (if the compiler is installed in the default directory). If it's not there then the install wasn't successful or the intialization code got munged somehow.
Are you mixing objs compiled with the C++ and/or C compilers? Could you print out your LD_LIBRARY_PATH and PATH environment variables and let me see them?
Thanks

Similar Messages

  • Cannot upload music says I O error what does this mean?

    When uploading tracks says high res best wav or aiff when track is chosen to upload says I O error what does this mean?Tried all types of files same thing!!
    == URL of affected sites ==
    http://www.jinglepunks.com

    connect it to your computer and open iTunes

  • HT201257 mac os x 10.4.11 tiger: apple hardware test has detected an error (what does this mean): 4SNS/1/40000001:VDOR

    Can someone help?  I did an apple hardware test and it has detected an error:  4SNS/1/40000001:VDOR
    What does that mean? Can i correct it myself? how?
    my computer is  "tiger" mac os x 10.4.11, Processor: 2.16 GHz Intel Core 2 Duo,  Memory: 2.5 Go 667 MHz DDR2 SDRAM

    Thank's for answering, realy appreciate your time,
    A technician had installed last year "mac os x snow leopard 10.6" (family pack) at around $49.00 - I had originaly mac os x 10.4.11 (tiger).  He had changed my hard drive, added memory: 2.5 Go 667 MHz DDR2 SDRAM, processor is: 2.16 GHz Intel Core 2 Duo  (he told me he had to change my hard drive probably due to a power shortage. Before he did the changes, I had done a hardware test: it gave me the same error as today 4SNS/1/40000001:DVOR,  He cleaned the inside, but he did not change any sensors. What am i to do???
    Not too long ago i started having problems. (probably from a power shortage, at one point.  I don't know if my external back up got corrupt. so i don't want to use it. He had eraced tiger 10.4.11 and installed snow leopard 10.6.
    I eraced snow leopard and installed mac os x 10.4.11 (that came with my computer).  
    I wanted to install mac os x 10.6 (snow Leopard) without eracing tiger (chat sites say you can do that) but it said it couldn't use my hard disk because of my memory:  my info says: used: 18,78 Go on the disk, available: 446.66 Go, Capacity: 465,44 Go
    So that's when i did a hardware test with the CD1 of mac os x 10.4 (tiger) and that where i got the message.
    If i have a sensor problem, then i guess i'm waisting my time trying to reinstall mac os x 10.6 (snow Leopard) or am i doing it wrong.  I was told i could leave tiger there and upgrade directly to snow leopard, without installing mac os x 10.5 (leopard).  
    Thank again

  • Tried to post comment on my Twitter account,said internal error.What does this mean?

    Could some please explain what this means?

    Try using another browser, see if you get the same error.
    http://www.google.com/chrome/intl/en/make/download.html?brand=CHKZ
    Try again later, maybe Twitter is having problems on their end.

  • Adobe Reader problem message; 'internal server error'; what does this mean?

    My update didn't take so I uninstalled the Reader and installed it again. This is the error message I bgot after the installation:
    Internal Server Error
    The server encountered an error while processing this request:
    {error,{case_clause,{undefined,undefined,undefined}}, [{ox_user,determine_user_id,2,[{file,"ox_user.erl"},{line,467}]}, {lists,foldl,3,[{file,"lists.erl"},{line,1248}]}, {ox_user,ensure_user_info,2,[{file,"ox_user.erl"},{line,25}]}, {webmachine_resource,resource_call,3, [{file,"src/webmachine_resource.erl"}, {line,186}]}, {webmachine_resource,do,3, [{file,"src/webmachine_resource.erl"}, {line,142}]}, {webmachine_decision_core,resource_call,1, [{file,"src/webmachine_decision_core.erl"}, {line,48}]}, {webmachine_decision_core,decision,1, [{file,"src/webmachine_decision_core.erl"}, {line,162}]}, {webmachine_decision_core,handle_request,2, [{file,"src/webmachine_decision_co
    any suggestions as to what the problem is

    What is your operating system?  Browser?  Reader version?
    You get this error when doing what?

  • Disk Utility error-what does this mean?

    Everytime I do repair disk permissions, and I do it almost daily, I get this message:
    Repairing permissions for “My Disk"
    Determining correct file permissions.
    Group differs on ./Private, should be 80, group is 0
    Permissions differ on ./Private, should be drwxrwxr-x , they are drwxr-xr-x
    Owner and group corrected on ./Private
    Permissions corrected on ./Private
    Group differs on ./private, should be 0, group is 80
    Permissions differ on ./private, should be drwxr-xr-x , they are drwxrwxr-x
    Owner and group corrected on ./private
    Permissions corrected on ./private
    Permissions repair complete
    The privileges have been verified or repaired on the selected volume
    Has anybody idea what is this?
    thank you

    Welcome to the Forums Nedd!
    It's normal, no worry for us.
    Michael Conniff covers some more of it here...
    http://discussions.apple.com/thread.jspa?threadID=121755&tstart=0
    I get the exact same as you when everything is correct!

  • -39 error, what does this mean, how do I fix it?

    I try and download a game from the iTunes store and I get this error message "There was a problem download ######. An unknown error occured -39."  How do I fix this, I am using the Windows Vista platform.

    This is a not uncommon problem when uninstalling iTunes and other Apple programs. It also occurs when updating because Apple uninstalls the previous version before applying an update.
    There is a Microsoft "Fix it" solution for programs that won't uninstall correctly found at http://support.microsoft.com/mats/Program_Install_and_Uninstall. It can bypass the network resource unavailable error. It is well written but may take several minutes (I have seen 20-30) to uninstall the app. When the utility finishes successfully the app is uninstalled and, if desired, you can try the software update again.
    This solution is a replacement for the older Windows Installer CleanUp utility (msicuu2.exe). Microsoft retired the CleanUp utility because it can cause problems with other programs installed by the Microsoft Windows Installer. If you see suggestions that direct you to download the older utility, please try this Fix it solution before doing so. Downloading programs from unknown sources can be risky.

  • Invalid Node Error: What does this mean?

    I have a white Macbook I purchased in September of last year, so the hardware warranty is still active. I did not purchase any extended care warranty, but am considering it now...
    This past Monday, I was using my computer at one work site, then had to go to another. I shut it down, and when I got to my next destination (roughly 15 minutes later) I tried to power it up. I got the gray screen with the apple, the little wheel spinning below it, and after about two minutes of that, it shut down. That's all it has done since. It was working perfectly until then, as far as I could tell.
    I have tried resetting the PRAM, taking out the battery and holding the power button down, running a hardware check, and booting from the installation disk. The hardware check said it detected no problems, but the disk utility consistently finds an Invalid Node error, and can't repair the disk. I can't verify either, for the same reasons.
    Of course, I have nothing backed up. I would like to recover my data if possible, but I'd rather have a working computer with everything lost than neither. I have an appointment at a Genius Bar for tomorrow, but was wondering if anyone had any suggestions as to what this might be.
    I appreciate any help!

    Disk Warrior can repair the invalid node problem if it's not extensive. However, if DW is unable to repair the disk, then reformatting would be your only other option.
    If you have a backup clone from which you can boot the computer then you can update the backup of your data files before reformatting the drive. If you don't have a backup (which you should,) then the following would be an option:
    If you have access to another Mac with FireWire, then you can use Target Disk Mode to access the drive and backup your data files, provided the drive is accessible.

  • The procedure entry point Sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.   what does this mean?????

    the procedure entry point Sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.   what does this mean?????

    Hi Vas, I'll do my best.
    I don't think the current error message you're getting is related to the previous one.
    I have researched a little bit on the error message you're getting, and it seems to be one that has been going on for a few years, and from what I can see it relates to the iPod Photo cache folder.
    It also appears that the actual phone does sync even though you still get this message.
    I suggest you have a look at these webpages for further information
    https://discussions.apple.com/thread/2441003?start=0&tstart=0
    http://support.apple.com/kb/TS1314
    Good luck and let me know how you get on

  • I have never been able to connect to the itunes store. It always says"itunes could not connect to the itunes store. An unknown error occurred.(306)  So what does this mean and how can I fix it?

    I have never been able to connect to the itunes store. It always says"itunes could not connect to the itunes store. An unknown error occurred.(306) " So what does this mean and how can I fix it?

    Hello zabetnz
    Start with the article below to get access to the iTunes Store. If it does not work, then there are some links towards the bottom of the article for additional troubleshooting.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Regards,
    -Norm G.

  • Error Code: U44M1I200. What does this mean?

    I have the Error Code: U44M1I200 when trying to update various Adobe programs.  The programs failed to update.  What does this mean?

    > Download and Install the latest version of Adobe Application Manager from the below link :
    Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
    Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
    > Try to install the update now and check.
    >If error still persists, Rename the OOBE folder to OOBE OLD from
    Mac: MAC HD/Library/Application Support/Adobe
    Win: C:\Program Files (x86)\Common Files\Adobe\
    > Install AAM again and try to launch.

  • After downloading the updates for Premier Elements 12 I got the following error message U44M1P7. What does this mean and how can I correct it. Thanks.

    After downloading the updates for Premier Elements 12 I got the following error message U44M1P7. What does this mean and how can I correct it. Thanks.

    glennpsychdoc
    What computer operating system is your Premiere Elements 12 running on? I suspect Mac because of the name your error.
    Please read the following Adobe document with the details and fix for error U44M1P7
    ATR Premiere Elements Troubleshooting: PE12: 12.1 Update Released
    Specifically open the following link in the above
    Update 12.1 installation errors | Photoshop Elements, Premiere Elements
    Please let us know if that works for you.
    Thank you.
    ATR

  • Everytime i try to sign into my itunes account, it says: We could not complete your iTunes store request. An unknown error has occured (0x800b0101). What does this mean and how can i fix it?

    Everytime i try to sign into my iTunes account, it says: We could not complete your iTunes store request. An unknown error has occured (0x800B0101). What does this mean and how can i fix it?

    Hello zabetnz
    Start with the article below to get access to the iTunes Store. If it does not work, then there are some links towards the bottom of the article for additional troubleshooting.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Regards,
    -Norm G.

  • I got an error message on my printer 0x610006f what does this mean?

    Officejet 6500 wireless
    windows xp 64 bit
    error message 0x610006f what does this mean & can you help me?

    Hi,
    I would start by clicking the + beside the "any other error code" and follow these solutions in order.
    0x error message
    Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    I am employed by HP

  • "itunes.exe - Entry Point Not Found" "The procedure entry point_dispatch_queue_attr_concurrent could not be located in the dynamic link library libdispatch.dll."???? What does this mean?

    I simply wanted to update my itunes and this is now the error message I get and can't access or even log into itunes or itunes store.
    "itunes.exe - Entry Point Not Found" "The procedure entry point_dispatch_queue_attr_concurrent could not be located in the dynamic link library libdispatch.dll."???? What does this mean?
    Anyone have a solution?

    This error has the same pattern as those discussed in the first and third boxes of the user tip Troubleshooting issues with iTunes for Windows updates, suggesting that you've got an outdated .dll file that needs replacing. You should find libdispatch.dll in the one of the following folders:
         C:\Program Files\Common Files\Apple\Apple Application Support
         C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    Delete it and then repair Apple Application Support from the control panel. If that doesn't work go for the full tear down and rebuild as outlined in the second box.
    tt2

Maybe you are looking for