64 bit system

Prior to purchasing, I wish t know does Element 8 work on a 64 bit system.

http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_PSE_and_Vista

Similar Messages

  • After rebooting my Windows Vista 64 bit system, could not access iTunes; after uninstalling I tried reinstalling, but it has been running for more than 24 hrs. Should I cancel installation?

    I had been updating my Windows Vista 64 bit system and as a result of a problem, had to reboot my system. Afterwards, I was no longer able to access iTunes.  I got a message stating that there was a problem with some of the files associated with the application.  A phone rep at Apple's Customer Service provided me with emails linking instructions on completely uninstalling and reinstalling iTunes. I did the uninstall, then checked for lingering iTunes files and couldn't completely remove some, but tried intalling the latest version of iTunes. It has been running for roughly 24 hours.  The status bar is green all the way across, and when I try to cancel, I get the following message: "Are you sure you want to cancel iTunes installation?"  I keep hitting "no," but am staring to wonder if there is a problem with the install.  Should it take this long if I have roughly 134 gigs of music?  I can still see the music in my computer's C drive, so I am worried that there is an error, perhpas because I didn't clear out all the lingering C:\Program Files\Common Files\Apple\ and all the lingering C:\Program Files\iTunes\.  Any thoughts?

    It is not just the HP. I have 3 HP computes and 2 Dell computers. 2 of the HP and 1 Dell suffer the iTunes internet block. Took me a while to figure it out also. But, the one thing that is different on the Dell, is that I can leave iTunes installed and not open it and everything works. As soon as I open it, internet access goes down. BUT secure sites (https:) works fine.

  • Having a problem with wireless connection. On my Windows XP 32 bit system and a 6510 printer, initi

    On my Dell Latitude D620, Windows XP 32 bit system and my 6510 printer wireless connection (Linksys EA4500) , everything works fine after the computer is booted.  After a period of time (usually overnight), I lose connection to the printer (the scanner icon with a red x is shown on my Windows task bar and I can't print.  Ran Windows Fix and the HP fix programs.  The only thing that solves it is to reboot the computer.  A second symptom is that my IE8 stops connecting to the internet at the same time (gives a 'waiting for' response that never changes).  Firefox still connects OK when this is happening.  So I suspect the problem isn't with the printer, but with my Windows set up.  It is a fresh XP SP3 install (hard drive crashed, but it happened before also).  I reset IE, checked my proxy, no malware, happens with or without firewalls and security programs.
    Hoping that someone else has run into this problem.  Been all over Google, and the IE doesn't work / Firefox works is fairly common, but none of the fixes helps. 

    If you want you can reload Firefox 4.0 or the last "old" version is 3.6.16 and is available here:
    http://www.mozilla.com/en-US/firefox/all-older.html
    Just reinstall your choice of FF. The bookmarks are in a different directory and are NOT overwritten. Some of the Add-ons that worked in 3.6 DO NOT work with 4.0, pay attention and head any warnings when you start 4.0.
    I had to disable extensions: Flashblock and WOT
    Firefox SafeMode? - A troubleshooting mode.
    1.You can open the Firefox 4.0 SafeMode by holding the Shft key when you use the Firefox desktop or Start menu shortcut.
    To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.
    For more help, see this: http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
    Hope this helps you out.
    Feedback is appreciated especially if this helps you out.

  • Unable to install iTunes 10.5.0.142 on Windows 7 64 bits system

    I am not able to install the latest version of itunes, version 10.5.0.142, released by Apple last week.
    I think it is important to note that there are three pending updates on my system (Windows 7, 64 bit), which keep on failing again and again no matter what the mode of update (manual via microsoft website or automatic via the program provided by microsoft). These are:
    1. Security Update for Windows 7 for x64-based Systems (KB2556532)
    2. Security Update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242)
    3. Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243)
    The methods that I have tried to install the latest version of itunes (all have failed as of now):
    a. Automatic via the previous version of itunes. This tries to download and install itunes in parts, but ultimately leads to the error originally pointed in this thread. Failed.
    b. Uninstalling the previous version of itunes completely as mentioned here: http://support.apple.com/kb/HT1923 and also using Microsoft Fixit and then trying to install the new version. Failed.
    c. Uninstalling all but apple software update, and then trying to update manually from the software update file available in c:\Program Files (x86)\Apple Software Update folder. Failed.
    d. Uninstalling all the versions of visual c++ (2005 and 2008), and then trying to install the latest version of itunes. Then re-installing the latest versions of c++ (2005, 2008 and 2010) along with updates but three as pointed above, and then trying to install the latest version of itunes. Failed.
    e. I have tried various permutations and combinations of keeping the firewall, antivirus and even the internet off and on. Failed.
    The combination of errors that I have received:
    - An error occurred during the installation of assembly ‘Microsoft.VC80.CRT,version=“8.0.50727.6195″,type=“win32,publicKeyToken=“1fc8b3 b9a1e18e3b”,processorArchitecture=“x86”. Please refer to Help and Support for more information. HRESULT: 0x80073712
    - Error 7 indicating installation of microsoft .net framework 4.0 for me (http://support.apple.com/kb/TS3074) and
    - Error 2 - "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2)
    However, I have seen on some websites that people have been able to install the latest version of itunes on their windows 7 64 bits system (surprising, but yeah).
    I would appreciate any pointers as to:
    ?1 How do I install the latest version of itunes on my system.
    ?2 If the steps are not included in the solution to ?1, how do I update 1., 2., and 3. mentioned above.
    ?3 If I am able to install itunes 10.5.0.142 on my windows 7 64 bit, would I be able to successfully my iPad2 to iOS5?
    Many thanks.

    I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
    Apple helps you find Original Sin with the Windows.

  • Java plugin not working on any browser (64-bit system)

    Hi there!
    I'm having a major problem with running Java plugin on all of my browsers (Opera, Chromium and Firefox) under my Arch Linux 64-bit system. The system is fully up-to-date, and Java plugin is being displayed among other plugins on "about:plugins" screen. The Java Environment was installed from Community
    [zbyszek@barca ~]$ yaourt -Qs jre
    community/jre 6u24-1
    Sun/Oracle's Java Runtime Environment
    Any ideas how to solve this?

    Hi,
    Maybe (just maybe, dont shoot me afterwards ) this link can help:
    http://plugindoc.mozdev.org/linux-amd64.html#java-sun
    Thor

  • WIndows 7 64-bit system printing to a Windows 2000 server configured as a print server

    Is there any way to configure a new Windows 7 64-bit computer to use a Windows 2000 server configured as a print server ?
    The printer that I would like to connect to is an HP 4240n LaserJet. I appears that there is only a 64-bit Universal Print Driver available. The server currently uses HP 32-bit PCL5e or PCL6 drivers for all other connected computers. Connection is through a Hewlett-Packard Network Port, using DLC/LLC transport for the embedded 4240n print server.  
    Installing  the HP 64-bit UPD to the WIndows 7 64-bit system, and then attempting to redirect the local port to the Win2k network print server has not worked.
    Thanks for any advice.

    Hi:
    See if this works...
    Run msconfig.
    In the System Configuration screen, Boot tab, Advanced Options, if there is a check mark in the box next to Maximum memory. Remove that checkmark and save your changes.
    Reboot and hopefully Windows recognises all the Ram ( minus the reserved ) after restarting.
    Please give that a try, and post back and let us know if that frees up some system memory for you.
    Paul

  • How do I retrieve a hWnd required to draw an image created by an ActiveX object on a windows 7 64-bit system?

    I'm calling to the NaturalPoint Optitrack SDK using activex controls and am trying to pull tracking data from a trackIR 5.  I have connected to the camera and wanted to start by just viewing a captured frame.  The Optitrack COM provides a function to draw the frame, but needs a hWnd handle for a window to draw to.  I tried to call FindWindow from the user32.dll, but only found FindWindowA, FindWindowExA, FindWindowW, and FindWindowExW.  I'm using Labview 8.6 (32-bit) on a Windows 7 64 bit system (trying to figure out how access the universities liscense manger to install LV2010 64 bit).  Thanks
    Jarad

    The other functions are variants, depending on how you're dealing with strings:
    FindWindowW : Unicode names
    FindWindowA: ANSI names
    FindWindowEx: Searches child windows for the window that has the specified name. You can provide a parent window handle as a starting point. The "A" and "W" follow the same Unicode/ANSI names as FindWindow.
    You'd want to use FindWindowA or FindWindowExA since LabVIEW doesn't support Unicode.

  • Crystal Reports XI R2 SP2 on Windows Server 2008 ( 32 bit system)

    Hi Forum,
    I am trying to run a .NET application on a windows server 2008( 32 bit system) with Crystal Reports X1 R2 SP2 installed.
    The application does not run and throws the following error in the event log.
    Faulting application w3wp.exe, version 7.0.6002.18005, time stamp 0x49e023cf, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, fault offset 0x0171ab98, process id 0x%9, application start time 0x%10.
    The same application runs fine on a windows server 2003.Also, the same application runs fine, when i remove the crystal reports code. It loads the .NET pages fine.
    Please suggest me if i am missing something. Please let me know how can i debug this issue?

    Hello,
    Crystal reports XIR2 is not supported on Windows server 2008.
    Check the supporting platforms guide here.
    [Crystal Reports XI Release 2 SP2 - Supported Platform Info|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/7081b21c-911e-2b10-678e-fe062159b453]
    Thanks,
    Bhushan.

  • Will photos created on a 32 bit Windows Vista Home Premium be readable on a Windows 7 64 bit system?

    I have around 25,000 photos in jpeg and tiff and in version sets plus some slide shows and blurb books created in the 32 bit system of Windows Vista Home Premium with PSE 10.0 and Premier and have to change to a 64 bit  Windows 7  system since Adobe is discontinuing the Photoshop Elements programs in early April of 2013. Will these photos created in 32 bit be readable and editable in the 64 bit system?

    Yes. PSE works on both 32bit and 64 bit systems.
    PSE is not being discontinued. The on-line service at Photoshop.com is simply moving to Adobe Revel.

  • Is there a way to open photoshop cs6 in 32-bit mode on a windows 7 64-bit system.

    I was wondering if there is a way to open photoshop cs6 in 32-bit mode on a windows 7 64-bit system, because photoshop won't recognize the pen pressure on my graphics tablet (yiynova msp19u) I read that some users got it to work in 32-bit mode on macs, and all my other programs like zBrush, art rage, sketch book pro recognize the pen pressure on the tablet.

    well I am going to assume that the application marked photoshop is the 32-bit application, since the other on is marked 64-bit and I don't see one 32-bit. in any case it still not recognizing pen pressure and i have the newest drivers. The only thing I can think of now is that wacom drivers are interfering with it some how since they don't get along, although I was pretty sure i got rid of all wacom software.
    Sigh, it's starting to look like I have to format my computer

  • Why is my 8 gigs of ram not fully usable on a Windows 7 64-bit system with an HP G42?

    The title contains most of the details, but to re-explain briefly, I recently installed two 4 gig sticks of ram in my HP G42-415DX.  The full 8 gigs shows as installed, but only 3.74 gigs is showing as usable.  I have verified that I have a Windows 7 64-bit system (Home Premium to be exact), and I have recently updated drivers (at least I'm sure I've updated all the drivers, but it is possible for one or two utility type drivers not being installed) to try to solve the problem, to no avail.
    If there's anything more I can provide, let me know.
    EDIT: And while I'm thinking of it, they are 8500's.

    Hi:
    See if this works...
    Run msconfig.
    In the System Configuration screen, Boot tab, Advanced Options, if there is a check mark in the box next to Maximum memory. Remove that checkmark and save your changes.
    Reboot and hopefully Windows recognises all the Ram ( minus the reserved ) after restarting.
    Please give that a try, and post back and let us know if that frees up some system memory for you.
    Paul

  • What to re-install from Lenovo on a Windows 7 64-bit system

    Hi,
    As we already have volume licences for Windows 7 Enterprise 64 bit systems, I made a clean install on my new ThinkPad X201,  Type: 3323, Model: 8TG. Now, apart from the rescue image in the special partition that was there when the computer arrived, I would like to have all other "Lenovo features" that were pre-installed with the factory installation that came with the computer.
    I have downloaded and installet the ThinkVantage toolbox and ThinkVantage System Update. It seems that Access Connections also is installed and the Power Manager.
    However I have also downloaded and installed the Fingerprint Software for Windows 7, 64-bit, but I am not sure where to find it!!!
    What else would you recommend that I download and install to make it work like the pre-installed x201 version from Lenovo?
    Also I would like to know if I should use Windows 7's system image builder or Lenovo's own version?
    And what about the migration tool from Lenovo? Is it better in anyway than Easy File Transfer that came with Windows 7??
    Thanks!
    Regards,
    Dag Wolters

    Go to support.microsoft.com/fixit
    In section 2 click on: Install or upgrade software or hardware
    Then click on the title in section 3: Fix problems with programs that cannot be installed or uninstall
    This link may get you there:  http://support.microsoft.com/mats/Program_Install_and_Uninstall/
    Let it run and then try to download it again

  • On a Windows 7 64-bit system, inserted video (mp4) in 2010 ppt, "Quicktime player unavailable"

    Need to give a presentation on a Windows 7 64-bit system. Quicktime, latest version is installed. Get to the slides with video and when "loading ..." the video the message below the picture ends up being "Quicktime is unavailable". The video does not work, never starting. The video works in Quicktime on the Windows 7 computer no problem when playing in Quicktime directly and not trying to play it from the ppt. Video is an mp4. Need help.

    Apple engineers generally don't read these forums. The best way to get information to them is to use the feedback page:
    http://www.apple.com/quicktime/feedback
    or open a Developer account (the "Online" program is free) and use Apple's Bug Reporter (this is usually the best way for an issue like this but you may not want to open a Developer account just for this purpose).
    Regards.

  • Just installed CC on my PC, Windows 7, 64 bit system. Not seeing any applications on the desktop or installation folder. However, all the resource files are present in the installation folder. What am I doing wrong?

    Just installed CC on my PC, Windows 7, 64 bit system. Not seeing any applications on the desktop or installation folder. However, all the resource files are present in the installation folder. What am I doing wrong?
    I've installed three times with no luck. I downloaded the Creative Cloud Packager off the licensing site: https://licensing.adobe.com. I unpacked and choose my applications. The install seemed to be successful, but I don't so any of the applications anywhere.

    Hi,
    Creating package doesn't mean it will install the product,
    You will need to install the package now. Please follow the instructions mentioned in the below articles
    Creative Cloud Help | Creating or editing packages
    Creative Cloud Help | Deploying packages
    Please let me know if it doesn't help.
    Regards,
    Devendra

  • How do I overcome the error 7 during Premier Elements 13 install? "cannot install on 64-bit system"

    I purchased and downloaded Adobe Premier Elements 13 and when I try to install the program I get error code 7 that it cannot install on 64-bit system. However the system requirements for the program says it is supported on windows 8; 64-bit.

    mardawn2
    Premiere Elements 13 on Windows 8 64 bit.
    Please download and install Premiere Elements 13 tryout files from the following web site and insert your purchased serial number in them during installation. Often this route is preferred if there are problems with alternative routes to obtain installation files for the program.
    Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
    In order to avoid Access Denied message, please follow carefully the "Note: Very Important Instructions" on the web page.
    The source will allow you to select carefully the installation files that should be used for the 32 bit or 64 bit computer environment.
    We will be watching for your progress.
    Any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • I want to put windows 7 on my iMac. Do I use Windows 7, 64 bit System Builder or do I use a "retail copy" of the Windows 7, 64 bit ? Microsoft says I should use the System Builder copy. A technical support individual from Apple said use the "retail copy"

    A Microsoft technical advisor said that the "retail copy" of Windows 7, 64 bit Home Premium would not work with Boot Camp to put the Windows operating system on the IMac. She said that I would have to use the System Builder copy of Windows 7 to put it on my iMac. An Apple technical advisor told me that I had to use the "retail copy" of Window 7 because that was the one used by Apple when they developed the Boot Camp program.  I have also seen some articles from Apple that suggests that both copies of Windows 7 would work OK. Does anyone have any experience that shows which one or both I should purchase to put on my computer?

    Welcome to ASC!
    I used the 64-bit System Builder Edition when I bootcamped my 2010 iMac a couple of years ago. Worked perfectly--installed a very lean system. Without all the extra cr@pware that comes preinstalled on name-brand Win computers, the SBE OS actually works darned well.
    However, that was under Mac OS 10.6.8 which remains on that computer for compatibilty reasons not related to Windows. Haven't BCed any newer Mac OS, so your mileage may vary.

Maybe you are looking for