64-bit version coming?

Is Oracle planning a 64-bit version of JDeveloper? If so, is the timeframe known?
Thanks.
Larry

John,
Thanks for replying. I really wasn't thinking of anything specific; I just know that some vendors are shipping 2 versions of their software, so I'm assuming that the "64-bit" versions take advantage of their ability to run on 64-bit processors (maybe large amounts of memory, as you mentioned, better performance, ...). I think there's more work going on to improve how 64-bit OSes can take advantage of 64-bit multicore processors (such as better concurrency perhaps). Aren't there some general advantages in running on a 64-bit JVM, or is that true mainly for servers and not so much for IDEs, etc.?
A colleague asked about this, so I thought I'd ask about it in this forum. I appreciate your response; I realize I asked the question without doing much thinking about it. I'll mark the question as having been answered.
Larry

Similar Messages

  • Is there a 64-bit version of the VPN Client for Vista coming?

    Is there a 64-bit version of the VPN Client for Vista coming for the VPN 3000 series concentrators?

    February 18, 2010
    Due to popular demand, the Cisco VPN Client v5.0.7 open beta is now available!
    In addition to serving as a general maintenance release, the Cisco VPN Client 5.0.7 beta is compatible with Windows 7 & Windows Vista 64-bit environments. 
    A 64-bit specific compatible image is available for installation on these platforms.
    Please have communicate feedback (both positive and problems) to [email protected]
    Key Capabilities available for Beta Testing:
    New Platform support – Windows 7 & Windows Vista 64-bit platform compatibility
    Software Access: http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=281940730 (under 5.BETA)
    Software is available for download by any customer with a Cisco.com SMARTnet™ enabled login.
    Release Notes will be available next week via a link once the download image is selected.

  • 64-bit version of FCP coming???

    So since uncle Stevie demo'd 32-bit and 64-bit apps side-by-side at WWDC last month, I'm wondering if they intend to ship a 64-bit version of Final Cut in our lifetimes?
    I mean a 2.5GB memory limitation and other limits in the coding could be eliminated by an major update (along with a whole new world of bugs<tic>) but at least we could do HD video faster (one would hope) and also rendor at the speed of light for a change.
    Just wondering.

    Apple is so close mouthed about application development.
    No doubt Leopard will influence some of this, and that's not until October.

  • Issues with 64 bit version of PS CS6 and now CC hanging, also sniffer_gpu.exe

    I cannot use the 64 bit version of Photoshop for awhile now. I had hoped that with CC coming out that would fix the problem, but it hasn't. I am able to use the 32 bit version, so after putting some time in with Adobe tech support to no avail after some hours, I'd just used that, but with the problem continuing in the latest edition I figured I should deal with it.
    I am running Windows 7 pro, an intel core i7 950 processor, and an AMD (ATI) Radeon HD 5700 video card.
    Both 64 bit versions of Photoshop hang for me before I can open any file. Looking in the resource monitor, at the wait chain, it states, 'one or more threads of Photoshop.exe are waiting to finish network I/O.'. The only way I can close the app then is by manually killing it in task manager or resource monitor.
    One thing I've noticed that may or may not be related, sniffer_gpu.exe only appears in the resource monitor while running a 64 bit version of Photoshop, both CS6 and CC. Once it appears, it seems to continually use 12% of my cpu, and even after I kill Photoshop, it continues to run and use 12% of my cpu, until I kill it as well. This does not happen at all when I run the 32 bit versions, I do not even see sniffer_gpu.exe appear.
    Anyone have a clue what the problem might be?

    Way back when, I did indeed uninstall and reinstall my Catalyst drivers, still no luck, still same problem.
    Finally today, some 6 months later, I was again dealing with Photoshop Phone tech support for another hour or two, including much hold time, finally having the issue excalated, as all software and drivers seemed up to date, and yet all versions of the gpu sniffer program still could not identify my gpu.
    After I got off the phone with them, I went to the AMD site and followed instructions on how to uninstall and reinstall their software. One step I had not thought of or tried was, after uninstalling the Catalyst software, repairing the .Net 4.5.1 framework through the Microsoft site before reinstalling the Catalyst software. It somehow seems that though the Catalyst installer software supposedly installs the .Net 4.5 framework, it cannot, unless the framework is already installed...
    Anyway, this does seem to have finally gotten the 64bit Version of Photoshop to finally work on my desktop.

  • Installing oracle 9i database in windows x 64 bit version

    Friends, I face difficulties in installing oracle 9i database in windows x 64 bit version 2003 server. The same had worked well with 32 bit version. I could install database and work in the same system in command prompt but the same could not be connected from sqlplus moreover DPCA,Netconfiguaration assistant all are not coming in the graphical way and i couldnt able to connect from the network. which brings ora-06413 error.
    please help me to get installed oracle 9i database in windows 2003 server 64 bit version.

    Go Through Below link
    >>>http://www.oracle.com/technology/software/products/oracle9i/index.html

  • "This iphone could not be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64-bit version of itunes"

    I am sick to death of seeing this error pop up! I have uninstalled/reinstalled several times, I have downloaded the 64-bit version and this message still pops up! I currently have the iphone 4 and use windows 7. I am at a loss on what to do now, it's aggrevating me, I have tried other methods and still no success! If anyone has had any success with over coming this error please inform me!

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • C'mon BlackBerry Get a 64-bit version of Media Sync Already!

    There's just no other place to post this so here I go.  It's 2008, 64-bit versions of Windows have been available since 2001 and BlackBerry Media Sync is only compatible with 32-bit versions of Windows?
    C'mon RIM, I know you can do better!  The Storm is coming out at the end of the month, but I'm only going to buy it if I can use it with iTunes and for me that means 64-bit capability.  Apple iTunes has been 64-bit compatible since the first Windows version, you'd think RIM would have followed suit.
    And no I don't want Blackberry Desktop Media Manager, thank you very much.

    Hi and welcome to the forums!
    You may be interested in the following DRM information;
    Supported file formats 
    Audio files with .wav, .mp3, .aac, or .m4a extensions Notes:
    Apple iTunes offers digital rights management-free (DRM-free) in Advanced Audio Coding (AAC) format downloads using the Apple iTunes Plus store. Files controlled by DRM cannot be copied to the BlackBerry smartphone. For more information on Apple iTunes Plus, search http://www.apple.com/
    Playlists containing photos, videos, or any unsupported media files are not synchronized with the BlackBerry smartphone.
    BlackBerry smartphone users can only sort, view, or synchronize by playlist names. Media files cannot be sorted, viewed, or synchronized by album, artist, or genre.
    Files that are not compatible with the BlackBerry smartphone media application or files controlled by DRM technologies cannot be copied.
    Thanks,
    Please remember to resolve your thread. Put the check mark in the green box that contained your answer! Thanks   
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • SAPNW04sSP9_Download_"Currently unavailable"  New Version Coming?(07/05/22)

    Hi,
    I downloaded the "SAP NetWeaver 04s SP9" but today (7/May/22) I saw the message "Currently unavailable." at Download area.
    There is a new version coming ?
    Best regards.

    ... while we're on that topic, such rebukes could be done in PMs. At the very least, the content of his message was relevant to the topic, and while it might take time to decipher it, but probably less so than typing out a well-meaning bit of advice.
    Back to the original topic: I guess I will try K-Lite then and return the results in the Opening Post.
    I have anticipated the reply below as I'm a forum addict myself and have been through the same argument many times. I do not doubt your post was well-meaning. In terms of productivity, however, a personal message would achieve a much greater effect as a general rebuttal because lecturing someone in public makes them go on the defensi've, thus in some cases sparking flame wars or snide remarks, which further add to the post counts of the individuals as well as clutter to the topic. On the other hand, a personal message imparts a sense of investment and trust that is more likely to catch the attention of a careless forum poster.
    Furthermore, one of the problems faced by forums is keeping the thread on-topic, which I deem to be more important than ease of reading. To honour that standard I have thus replied in an edit and not a new message, and take pride in keeping my post count low but relevant.Message Edited by Primaeva on 09-07-2006 08:4 AM

  • I downloaded the 64 bit version of Photoshop and I need the 32 bit and I cannot download it

    I downloaded the 64 bit version and it says my computer cannot support that. Dealing with your layers of customer service is frustrating and at this point I am going to shop the credit card payment for this product. I want my money back.

    here's the 32 bit installer, 2014 release of Photoshop CC: Separate 32-bit/64-bit installation
    Return, cancel, or exchange an Adobe order

  • How to install iTunes 12 64-bit version?

    I have a laptop on Windows 8.1. Previously I had iTunes 10 32-bit version for awhile. It was reliable most of the times (sometimes the program freezes when playing/pausing songs etc.) but decided to upgrade to iTunes 12 64-bit version so that it would hopefully resolve that issue. I have downloaded from the official Apple website which states it's the 64-bit version but when I install it onto my PC, it is just the 32-bit version. How can I change it to 64-bit or is there an option to select it to 64-bit during installation?
    Thanks for reading.

    You can't arbitrarily select which version to install - you must use the installer that's compatible with the release/edition of Windows that you are using.  You may be seeing the consequences of the fact that the 64-bit version of iTunes is not *completely* 64 bit - the main application is still 32 bit and will therefore, on a 64 bit system, be installed in the Program Files (x86) folder.  Other components are, however, required for correct operation with a 64-bit version of Windows.  If you download iTunes from the primary source (http://www.apple.com/itunes/download/) scripts on Apple's webpage will detect the architecture of your PC and only offer the correct version for it ... though there is some anecdotal evidence that those scripts may fail for some users, and you may need to go directly to the relevant downloads:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe
    See turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for more details if you're still having problems with installation.

  • How to install 64-bit version on 64-bit OS

    I am trying to install Labview 2011 SP1 Evaluation on Windows 7 64-bit OS. When I go to choose the isntallation directory it automaticaly points me to the 32-bit compaibility folder "Program Files (x86)". I believe this isntall the 32-bit version of Labview. I want to install the 64-bit version. How can I do this?
    Solved!
    Go to Solution.

    hounddog wrote:
    I had a 64 bit and a 32 bit version installed after the first version because there were some tools that I wanted to install that would not install on the 64 bit version.  There seem to be 2 different program file directories now: Program Files and Program Files (x86) so I'm assuming that they are for the two different versions of LabVIEW.  In the Program Files / National Instruments / LabVIEW 2011 directory there is a LabVIEW.exe file, but in the similar (x86) directory there is no LabVIEW.exe file.  It seems like there is no 64 bit LabVIEW version still installed in this computer. When I downloaded the CAN device drivers and installed the package, the sub VIs did not show up in the tool bar when I ran LabVIEW. However, when I look in the (x86) version files I see the CAN folder installed in the 64 bit program files directory!  Should I uninstall the current version and reinstall the 64 bit verson to fix this CAN problem, or is there another way to fix this
    You got it mixed up here. Microsoft decided that Program Files is always meant to mean the native version, which means that for Windows 64 bit, any 64 Bit applications get installed there. Program Files (x86) is for 32 Bit applications that will run inside the Win32 subsystem in Win64. Most NI Toolkit and driver installers only install into 32 Bit. So if you use LabVIEW 64 Bit you will usually have to copy the files from the Program Files (x86) directory into the according Program Files directory, making sure you maintain the same hierarchy.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Browse in Adobe Bridge CS6 - default to 64-bit version

    I have Adobe Bridge CS6 32-bit and 64-bit installed. I prefer to use the 64-bit version, but whenever I right-click a folder in Windows Explorer and choose 'Browse in Adobe Bridge CS6', the 32-bit version always opens. How can I make this default to the 64-bit version? There doesn't seem to be a way to uninstall the 32-bit version.

    Edit your System Registry on:
    HKEY_CLASSES_ROOT\Directory\shell\Bridge
    Change the path that is pointing at 32bit version and set it to point at the location of 64bit version:
    C:\Program Files\Adobe\Adobe Bridge CS6 (64 Bit)\Bridge.exe "%L"

  • I installed the new iTunes 11.1.4 with windows and when I plog in my new iPod, I get a warning notice telling me to install the 64-bit version, how do I fix this problem?

    Please Help I don't know what to do
    I just installed the new iTunes 11.1.4 and when I plug in my iPod touch, it sends me a warning note
    telling me that the requested software is not installed, to uninstall iTues and install it again with the 64 bit version
    I've already tried it but the same thing happens

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now?

  • ITunes on XP 64 bit ... Can I Run a 32-bit Version?

    I understand that there is no supported version of iTunes that will run on XP 64-bit, but I followed a hack that I found and got it running on my XP 64-bit machine at work. The problem is that I am now getting an error message that says something about "Can't save library, not enough memory" or something like that. I have 6GBs of RAM and almost 200GB of space open on my HD. Is this a common error using a hacked version of iTunes? Is it possible to install and run a 32-bit version on a machine running XP 64-bit? I have both 32 and 64-bit versions of Photoshop and they both run fine.
    I also have Service Pack 2.
    Thanks in advance...
    Lloyd

    Here's what one user said to to to get iTunes to run in Vista/XP 64 bit.
    Start Menu -> All Programs -> Accessories -> Right Click on Command Prompt -> Run As Administrator.
    Type “cd C:\Windows\SysWOW64″
    Type regsvr32 vbscript.dll
    If you don’t do Run as Administrator, the regsvr32 will fail. Also, be careful to run the command in SysWOW64, not System32! System32 on a 64-bit system actually contains the 64-bit system libraries.
    No guarantees, but it might be worth a try. You may find alternative workarounds if you search this forum for "XP 64". None of the workarounds I've seen have been completely functional, so an upgrade to a newer version of Windows is probably something to consider.
    Regards.

  • HELP! I am a Cloud member and need a 64 bit version of Illustrator to open files I just created

    I spent the last few days creating files to send to print ASAP TODAY and now I can't open them. Warning says it contains a very large image that can't be opened in my version of Illustrator. Try opening in a 64 bit version : ( Where do I get this patch in Cloud?

    All Cloud versions of AI (both CC and CS6) are 64bit.

Maybe you are looking for