64 bit version on iTunes?

I have now downloaded, installed, and had to uninstall iTunes 3 times. Every time I open iTunes it tells me I need to uninstall it because it can't burn or rip CD's. I can burn and rip so I don't know why it tells me this. Didn't bother me until I bought an iPhone today and tried to connect it. I receive a message saying that I need the 64 bit version of iTunes installed but I can't find this. I am pulling my hair out, or lack there of right now, please help!!!

I'm in the same boat, Windows XP x64, old 32-bit version of iTunes works, 4.6 32-bit gives me the warning:
"This iTunes installer is intended for 32-bit versions of Windows. It is highly recommended that you download and install the 64-bit iTunes installer instead. Continue with install?"
I say yes, because the 64 bit version is for Vista only (and doesn't work)
I then go next, next etc and it starts installing then I get a dialog:
"iTunes Insatlled Completed
The installer encountered errors before iTunes could be configured.
To retry these operations at a later time, please run the installer again."
any suggestions for getting iTunes 4.6 working on x64?

Similar Messages

  • This ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.

    I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop. With trepidation but acknowledging I don't know any of the stuff they were talking about, I allowed them to raid my laptop thinking it could be for the best. Now I'm not sure if it is related or not but depsite me having the most recent Itunes updates on both my Ipod 4TH GT, I am getting the following message everytime I connect my Ipod to the computer...and the timing would be about right too:
    this ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.
    If it helps I am running the 10.7.0.21 on the Sony Vaio & remember checking last week I do have the latest update on the Ipod but it is a different version from the Itunes on the laptop (which may be normal, I wouldn't know) but as I am away from home & Wifi I can't tell u the version on that though.
    My problem is I cannot find an apple installer on the laptop to uninstall & I have searched Apple & Google for help and have seen others posts with the same issue but alot of the answers unfortunately I can't follow. I would greatly appreciate it if you can you answer any of these questions for me?
    *Will add & remove totally uninstall Itunes so that I can reinstall?
    *Will I lose my apps, music & data?
    *If the apps, music & data is recoverable, how do I do that?
    Sadly I can't find the installer & would love to add my new Mumford & Sons cd to my Ipod collection but don't know how to fix this. I love my Ipod & google but I have spent hours tryign updates, downloads, searches & feedback to Apple. A few months ago I had an Itunes billing problem & there was a webpage where you could email an apple support worker & rhe replied to my credit card problem within a day or 2 but I can't find that help for this problem..I couldn't express my graditude enough if you could help me with this, but thank you.

    dorygirl2009 wrote:
    I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop.
    This "smart friend" really sounds like a collosal moron.
    Follow the instructions here: http://support.apple.com/kb/HT1925  to remove and reinstall all Apple products on your computer.
    Once you get everything working, the next time your "smart friend" wants to touch your computer, tell them firmly NOT A CHANCE IN ****! 
    None of your data (media, podcasts, apps) will be affected by removing and reinstalling iTunes.

  • Even though I have a 64 bit version of iTunes, whenever I connect my iPhone it asks me to install 64 bit version of iTunes

    I reinstalled itunes 10.5.3 64 bit version on my Windows 7. When I connect my iPhone it gives me a error message of incorrect version and to uninstall and reinstall with 64 bit version. I have tried this over and over again but this message is not going. 
    I am not able to connect my iPhones 3GS (32GB) with my laptop. Please help!
    I am sending the result of the diagnostics
      Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    ASUSTeK Computer Inc. NX90Jq
    iTunes 10.5.3.3
    QuickTime 7.7
    FairPlay 1.13.37
    Apple Application Support 2.1.6
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 0041AD5C0337DA28
    Current user is not an administrator.
    The current local date and time is 2012-03-05 16:27:34.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce GT 335M
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Device Connectivity Tests ****
    iPodService 10.5.3.3 (x64) is currently running.
    iTunesHelper 10.5.3.3 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Renesas Electronics USB 3.0 Host Controller. Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod touch running firmware version 3.1.3
    Serial Number: 9C8113AB14P
    iPhone 3GS running firmware version 5.0.1
    Serial Number: 870031DL3NR
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.
    The exact error message is
    This iPhone cannot be used because the required software is not installed. Run the the iTunes installer to remove iTunes, then install the 64 bit version of iTunes.

    This iPhone cannot be used because the required software is not installed. Run the the iTunes installer to remove iTunes, then install the 64 bit version of iTunes.
    That usually indicates that your Apple Mobile Device Support has not installed. That's also what is being shown by the diagnostics (the driver is there but the application isn't).
    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • I plug in my iPhone and this message showed. "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." I did this but still not working. Please advise

    I have a problem with connecting my iPhone to iTunes. I uninstalled one of the computer program and restart my laptop. After restart my laptop and a message said that iTunes might not working because one of the component is missing and request to reinstall the iTunes. Hence I remove iTunes from my laptop and I reinstall iTunes to my laptop but still not working.
    Before this the iTunes will automatically launch when I plug in my iPhone. But after I reinstall iTunes, it's not working. When I try to plug in my iPhone after iTunes launched and message "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." popped out. I did this twice but it's not working as well.
    Please advise what should I do to fix this.

    First make sue you are installing the 64 bit version of iTunes.
    Second make sure it is iTunes 10.7 or later.
    I would download a fresh copy of the 64 bit version of iTunes 11. After installation reboot your computer.
    Before connecting your phone reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • This iPad cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes

    I have seen others post this same question but the answers provided does not resolve my problem. My iPad Air is running iOS 7.1.2. I have been using this same computer for three years. It has Windows 7 home premium, service pack 1,  64-bit Operating System, Intel 3.4GHZ computer and 16.0 GB .  I used this same computer with my iPad2 for several years. I purchased an iPad Air a year ago. I never had a problem with either iPad using iTunes. About a week ago, my computer would no longer recognize the iPad Air. I thought it must be a driver problem or iTunes somehow became corrupted. I uninstalled all of the Apple products except for iCloud and deleted any Apple software left in my Program Files and Program Files (x86). I then downloaded from Apple, iTunes64Setup.exe which is a 110,833 KB program. I installed the program without a problem. It installed Bonjour, Apple Software Update, Apple Application Support and iTunes. These programs I had previously uninstalled. I then brought up iTunes.  I now plugged in my iPad Air and a popup message appeared "This iPad cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes". OK, I did as instructed. I used the iTunes installer to remove iTunes then ran iTunes64Setup.exe. I brought up iTunes and got the same message. "This iPad cannot be used because the required software is nt installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes"  In general, I have found the Apple software to be robust and reliable. This situation however is very disappointing. I am hoping that someone has an answer that I can use to resolve my problem.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
    In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
    tt2

  • Everytime I connect my iPod to USB, iTunes says the following: This iPod cannot be used because the required software is not installed.  Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.

    I have the latest 64-bit version of iTunes on Windows 7 Ultimate.  Everything was fine until recently.  Now when I connect my iPod Touch to the USB to sync with iTunes, I get the following message:  "This iPod cannot be used because the required software is not installed.  Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes"  I have removed, repaired, and installed the 64-bit version numerous times as well as disabled all antivirus / adware utilities.  Same message appears when I plug in my iPod.  Any help would be greatly appreciated.

    Did you try removing and reinstalling all the Apple software using these instructions:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • How come iTunes keeps saying:"this iPod can not be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64 bit version of iTunes?"  Wth...i am using the 64version.

    Hi. How come iTunes keeps saying:"this iPod can not be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64 bit version of iTunes?"  Wth...i am using the 64 bit version of itunes. Why does it keep saying that? Will someone Help me please!? This is is getting frustrating. I already had done a full removal of everything! I even removed and deleted my library...then had to put all 500 songs back on one by one. So, i don't have to remove everything again, just to get my ipod to work on here. You, know before the itunes update, my ipod and itunes were working just fine.

    wow, that was a quick reply. lol. but i have removed everything. I wasn't even able to get iTunes on my computer for a little while. i kept getting errors on that. Now it's saying that the required software isn't installed. Hmm, could it be referring to Apple Mobile Device Support? That is supposed to be installed with when iTunes gets installed right? I only ask, because that  didn't get installed with the itunes setup.

  • HT4623 latest iTunes will not recognize new iPod. i get message "this ipod can't be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64 bit version of iTunes." 64 bit version of iTunes is inst

    I have a new iPod Touch 5th gen. My computer works on Windows 7. Latest ITunes gives me this message: "this ipod can't be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64 bit version of iTunes." I have already removed and reinstalled a couple of times--making sure to remove all the related applications as well--Bonjour, Apple Software update, Apple Application Support. Help!

    (apologies for barging in, lllass.)
    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now?

  • After installing the 64 bit version of itunes my iphone still won't sync. I get the explantation that I mobile driver application did not download and i need to remove and reinstall itunes (which I have done numberous times).  Any help?

    After installing the 64 bit version of itunes my iphone still won't sync. I get the explantation that I mobile driver application did not download and i need to remove and reinstall itunes (which I have done numberous times).  Any help?

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now?

  • After downloading the 64 bit version of itunes, when i plug my iphone in, it says that i need the 64 bit version software

    after downloading the 64 bit version of itunes, when i plug my iphone in, it says that i need the 64 bit version software
    PLEASE!!!  LOL

    Hello Rob,
    It sounds like you have installed the 64 bit version of iTunes, but you continue to the get an error message that suggests to download the 64 bit version any time you connect your iPhone.  I understand that you have already uninstalled and reinstalled iTunes, but sometimes you may need to uninstall additional components related to iTunes to completely remove it from your system.
    I recommend following the steps in the article below to completely uninstall iTunes (click on the link for your version of Windows):
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Once you have completely uninstalled iTunes, you can download the 64 bit version of iTunes for Windows here:
    iTunes 11.0.5 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Every time I attempt to download the 64 bit version of iTunes it just freezes my entire computer right in the middle of installation. Anything?

    Every time I attempt to download the 64 bit version of iTunes it just freezes my entire computer right in the middle of installation. Anything?

    Same problem. 

  • I received this error msg when I wants to sync my 3gs iphone. Please help. "This Iphone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes."

    I received this errir msg when I wants to sync my 3gs iPhone. And I already update my iTunes to 64-bit. "This iPhone cannot be used because the required software is not installed.Run the iTunes installer to remove iTunes, then install the 64-bit version itunes".

    First make sue you are installing the 64 bit version of iTunes.
    Second make sure it is iTunes 10.7 or later.
    I would download a fresh copy of the 64 bit version of iTunes 11. After installation reboot your computer.
    Before connecting your phone reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • I was told to uninstall then reinstall itunes because "no apple application support"so i did, now wont recognise my iphone and says to uninstall itunes and instll the 64-bit version of itunes so i did again,and again,and again.still wont work pls help me?

    I was told to uninstall then reinstall itunes because "no apple application support", so i did, now it wont recognise my iphone and says to unistall+install the 64-bit version of itunes so i did, again..and again..still nothing please help me?!

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • I downloaded 11.1-64 bit itunes, but when trying to sync I am getting an error message that states I have to download the 64 bit version of itunes.  ALREADY DONE!  HELP!

    I am having problems syncing my I-Pad.  I downloaded the new version of I-tunes and when trying to sync I am getting a message..."This ipad cannot be used because the required software is not installed.  Run the itunes installer to remove i-tunes, then install the 64 bit version of itunes."
    Can anyone help me?

    Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
    Also
    - Reboot the computer
    - Try another cable
    - Try another USB port

  • I am trying to load the 64 bit version of iTunes on to my PC but it continues to fail. My Pc is running Windows XP x64 edition. The rrror message states I need Window Vista 64 or later. What should I do?

    I am trying to load the 64 bit version of iTunes on to my PC but it continues to fail. My Pc is running Windows XP x64 edition. The rrror message states I need Window Vista 64 or later. What should I do?

    There is no version of iTunes that truly supports the 64-bit version of Windows XP and never will be. If you search this forum for "XP 64" or do a web search for something like "iTunes Windows XP 64",  you'll find threads describing the process some people have used to "crowbar" iTunes onto XP 64, with varying levels of success, none of them complete.  
    Regards.

  • HT204406 Please help!  I have downloaded the 64 bit version of iTunes for my Sony running WIndows 8.  I have iTunes running on 3 other machines (MACs) with no issue.  On the Sony with WIndowns everytime I turn on ITunes Match WIndows fails, everything shu

    I Have downloaded the 64 bit version of iTunes for my Sony running Windows 8.  Install went fine and I can get in to iTunes and see the music residing on this machine.  However, everytime that I try to run iTunes Match Windows crashes.  So frustrating.  BTW, this worked fine until a couple of weeks ago.  Anyone know what's going on?

    How big is your library?  I would recommend the following troubleshooting steps:
    - Backup your library.  Always a good idea before messing with things.  
    - Create a new library.   Refer to this article for details:  http://support.apple.com/kb/HT1589.  This won't delete your old library, you're just creating a new empty one.  Also refer to this article to get back to your old library later.
    - Add a few albums into this new library.  Not everything, just a small sampling, as a test.
    - Activate Match on this new library.  You shouldn't have to re-pay, it should just say "Add Computer" or similar.
    - At this point, Match should run again. With just a few albums it should complete in just a few minutes.
    If iTunes doesn't crash at this point, then likely there's something about your original library that Match doesn't like - what that is I don't know, but at least you'll know it's not your PC.   If iTunes still crashes, then if could be a number of other things, but probably not your library.   My next suggestion (if you haven't already done this) is to uninstall / reinstall iTunes.   If that doesn't work, then my next ideas you won't like.   

Maybe you are looking for

  • Help needed: Image Processor.jsx missing in CS4

    The Image Processor.jsx is missing from my Photoshop CS4 scripts folder and when I search I don't find it anywhere. (I get "Image Processor.jsx cannot be found" error when I try to do Image Processing in Bridge CS4.) I guess it never loaded. Can some

  • Listener shutdown with linux error 29 : ilegal seek

    Hi, everybody and some gurus I'm using VMware ESX server. I have successfully installed Oracle 10g R2 over Fedora 7. Then I made a clone of this server. After changing name and IP Oracle listener crashes with linux error : 29 : Illegal seek. After se

  • Empty lov

    Hello everyone! i need to handle a lov which can return 0 rows. in this case i should delete the record ( i have some required items in my block..) thank you in advance!

  • Unable to download Flash Player 10.3.181.34

    The downloader stops at 12% and I get an error reading "Unable to contact trackers". I've tried downloading from here, but the download itself won't even start, whether I use Firefox (it's frozen and stays on "Starting...") or Internet Explorer. Anyt

  • Download/Convert Youtube to play in Quicktime?

    Hi, I'm looking for a program that lets me download and convert youtube files (which are in the .flv format) to .mov or even .wmv (i have a QT plugin for that). If anyone knows of a program that - 1:can do both download and convert 2: really easy/wor