64 bit Weblogic Server 10.3.2 installation on Windows Server 2008 R2 x64 ?

Hi,
I'm trying to install 64 bit version of Weblogic Server 10.3.2 on my 64 bit OS Windows Server 2008 R2 SP2.
Firstly I downloaded "jdk-6u24-windows-x64.exe" and installed it on my 64 bit platform.
I downloaded "wls1032_generic.jar" and try to install it by the command below
"java -d64 -jar wls1032_generic.jar"
however I got the message below
Unrecognized option: -d64
Couldn't create the Java virtual machine
Any options about this problem. Where am I making mistake?

Hi,
You need to make sure the following things :
1). If you want to run your WLS on W 64 bit mode then You need to use Generic Jar installer Example: *"java -jar wls1032_generic.jar"*
2). The above Jar should be installed only using a 64 Bit JVM so that all the 64 bit libraries will be available with the WebLogic while installing it. So first of all Download a 64 Bit JVM in your Woindows box.
Then just run the following command to check if the JVM is 6t4 bit or not:
set JAVA=HOME=C:\My64BitJDK\jdk1.6.0_21
*$JAVA_HOME\bin\java -version*
3). Now u can run your WebLogic Installer like following:
*$JAVA_HOME\bin\java -jar wls1032_generic.jar*

Similar Messages

  • JDK 5 for 64 bit for B1ic installation on windows server 2008 64 bit

    Hello to All,
    I want to download jdk 5 for X64 ,i have searched lot of time on gooogle and other place but not find for 64 bit.
    my one of the client working on windows server 2008 with 64 bit and i want to install integration component(SAP 8.81 PL 00) .
    If any one have any link please share in form.
    Thanks
    Manvendra Singh Niranjan

    Hi,
    Try to find it into Oracle Archives:
    http://download.oracle.com/otn-pub/java/jdk/1.5.0_22//jdk-1_5_0_22-windows-amd64.exe

  • Installing Application Server 10g (10.1.3) on Windows Server 2008 R2 64 bit

    installing Application Server 10g (10.1.3) on Windows Server 2008 R2 64 bit
    i have installed this but restarting of server making problem
    i m not able to start opmn.ctl
    what should i do is there any other version to be downloaded
    I did.
    1. i installed X 86 software as 64 bits is available for itanium only
    2. it installed successfully after changing value in orapram.ini
    now after reboot of server my opmnctl doesnt come up
    what can be the issue?

    hi,
    1st..check whether all the services of oracle are started in services.msc(if possible pls specify what all services of oracle can you see in services.msc)
    2nd..when you use the command opmnctl startall..what errors do you get..
    3rd..can you specify the opmn.logs and ons logs
    Regards
    Fabian

  • Cannot Add File Share to (any) File Server Role of a Cluster in Windows Server 2012

    Cannot Add File Share to (any) File Server Role of a Cluster in Windows Server 2012...
    Get this message in the Operational Log in "FileServices-ServerManager-EventProvider" section of MS-Windows Eventlogs:
    Exception: Caught exception Microsoft.Management.Infrastructure.CimException: The xsi:type attribute (MSCluster_Property_Resource_Network_Name) does not identify an existing class.
       at Microsoft.Management.Infrastructure.Internal.Operations.CimSyncEnumeratorBase`1.MoveNext(Boolean discardResultsAndErrors)
       at Microsoft.Management.Infrastructure.Internal.Operations.CimSyncEnumeratorBase`1.MoveNext()
       at Microsoft.FileServer.Management.Plugin.Services.FSCimSession.PerformQuery(String cimNamespace, String queryString)
       at Microsoft.FileServer.Management.Plugin.Services.ClusterEnumerator.BuildNodes(ICimSession session, ClusterRole scopeType, String query, IDictionary`2 groupNameToTypeMap)
       at Microsoft.FileServer.Management.Plugin.Services.ClusterEnumerator.GetClusterClientAccessPointNames(ICimSession session, IDictionary`2 groupNameToTypeMap)
       at Microsoft.FileServer.Management.Plugin.Services.ClusterEnumerator.RetrieveClusterConnections(ComputerName serverName, ClusterMemberTypes memberTypeToQuery)
    Thanks for help...(everything else works fine in other type of cluster roles).
    Thomas.

    This issue also happens in fresh Windows 2012R2 installations, not just upgrades from 2008R2!
    I have the issue where I cannot modify any settings on SMB shares.  Here is the stacktrace.  It appears to be WMI related.
    Error: ERROR: Task 'TEST.xxxxxxx.COM-ClusterStorage$-SmbShareUpdate-46bcabf6-1dd4-4a48-a525-5e5d374596c7' has failed: Microsoft.FileServer.Management.Plugin.FSACException: Error occurred while updating an SMB share: The requested operation is not supported.
    ---> Microsoft.Management.Infrastructure.CimException: The requested operation is not supported.
       at Microsoft.Management.Infrastructure.Internal.Operations.CimSyncEnumeratorBase`1.MoveNext()
       at System.Linq.Enumerable.SingleOrDefault[TSource](IEnumerable`1 source)
       at Microsoft.Management.Infrastructure.CimSession.ModifyInstance(String namespaceName, CimInstance instance, CimOperationOptions options)
       at Microsoft.FileServer.Management.Plugin.Services.FSCimSession.ModifyInstance(ICimInstance instance)
       at Microsoft.FileServer.Management.Plugin.Services.FSCimSession.ModifyInstance(ICimInstance instance, IEnumerable`1 propertiesWithKeys)
       at Microsoft.FileServer.Management.Plugin.Providers.WmiUpdateTaskBase.DoUpdateInstance(ICimSession session, ICimInstance instance)
       at Microsoft.FileServer.Management.Plugin.Providers.WmiUpdateTaskBase.DoWork(Object sender, DoWorkEventArgs e)
       --- End of inner exception stack trace ---
       at Microsoft.FileServer.Management.Plugin.Providers.WmiUpdateTaskBase.DoWork(Object sender, DoWorkEventArgs e)
       at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)

  • Compatibility Exchange Server 2003 SP2 and Domain controllers Windows Server 2008 R2

    Hi all, I have this scenario:
    - Two Domain Controllers Windows Server 2003 R2 SP2
    - Two mail servers Exchange Server 2003 with the following version:
      6.5 (Build 7638.2 Service Pack 2)
    I want to upgrade my domain controllers to Windows Server 2008 R2.
    My question is whether exchange Server 2003 6.5 (Build 7638.2 Service Pack 2) is supported with Domain Controllers Windows Server 2008 R2.
    Can you tell me some official Microsoft website where this reflected?
    regards
    Microsoft Certified IT Professional Server Administrator

    Exchange Server 2003 SP2 supports DCs running Windows Server 2008 R2. These DCs should be RWDCs and not RODCs:
    Exchange 2003 SP2 will now be supported against writeable Windows Server 2008 R2 Active Directory Servers.  Additionally, with the General Availability of Exchange Server 2010, and those looking to standardize on Windows
    Server 2008 R2 we have enhanced the supportability of forest and domain functional levels up to Windows Server 2008 R2.  This change is effective immediately on Exchange 2003 SP2.
    Reference: http://blogs.technet.com/b/exchange/archive/2009/11/30/3408893.aspx
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Microsoft SQL Server 2012 Performance Dashboard compatible with windows server 2012?

    Is Microsoft SQL Server 2012 Performance Dashboard compatible with Windows Server 2012? I only see Windows Server 2008r2 as the most recent version in the System Requirements list. Thanks!

    Is Microsoft SQL Server 2012 Performance Dashboard compatible with Windows Server 2012? I only see Windows Server 2008r2 as the most recent version in the System Requirements list. Thanks!
    As per download documents supported windows versions are
    Windows 7, Windows Server 2008 R2, Windows Server 2008 Service Pack 2, Windows Vista Service Pack 2.
    I cannot see any mention of Windows server 2012 in system requirements
    See System Requirements 
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • Weblogic server 9.2.2 installation on Windows 2003 64bit

    Hi,
    I need to install Weblogic 9.2.2 server on Windows server 2003 SP 2, however as this is an old version I have not been able to find documentation on how to do the installation.
    Where can I find installation instructions for this?
    Please help
    Thanks,
    aie

    Hello,
    Please look at this documentation. Hope this is what you are looking for. Also make sure the exe installer you have should support your 64 bit machine.
    http://download.oracle.com/docs/cd/E13179_01/common/docs92/install/index.html
    Thanks,
    Sunil N.
    Edited by: Sunil Nandargi on May 12, 2011 2:10 PM

  • CF9 installation on Windows Server 2008 R2 64 bit

    Our company is looking purchase CF9 standard edition and install it on a Windows Server 2008 Std. Edition R2 64bit.
    Does anyone forsee any problems as far as compatibility is concerned?

    Not in the slightest - I installed five just the other week
    All our virtual machines, running 2008 R2 x64. We went for Enterprise Edition, but I believe in CF9 they're both 64-bit anyway. These are the from the build notes I built up:
      Install extra roles:
        Application Server
        Web Server (IIS)
          Application Development
          IIS6 METABASE Compatibility
      Install extra Features:
        SMTP Service
    Other than that nothing else needs doing. It's worth noting (as a slight but irritating aside) that in 2008 R2 the SMTP service is set to Manual not Automatic, so you'll want to change that unless you want your emails to stop every time you reboot the box.
    But the actual install itself was far simpler than CF8 on 2008.
    O.

  • OBI11g installation on Windows Server 2008 R2 (64bit)

    Hi,
    Sorry to pick up this topic again, but my research in the forum and other inet sites doesn't help me so far and my installation will not work.
    My Situation:
    I have a Windows Server 2008 R2 (64bit) default installlation. The server (HyperV-managed) has 4 GB RAM.
    I added a Loopback adaptor and set for the loopbackadapter a fixed IP (10.10.10.10 Subnet: 255.255.255.0).
    Entered in the host file (127.0.0.1 localhost and 10.10.10.10 servername)
    Installed JDK 64bit
    Installed Oracle Client 32bit
    Then I tried all three options:
    1) Default OBIEE Installation --> start of coreapplication_obips1 has failed. Everything else was fine. I was not able to start the obips1 manually
    2) Enterprise Installation --> start of coreapplication_obips1 has failed. Everything else was fine. I was not able to start the obips1 manually
    3) Manually installed WebLogic 1033 --> SoftwareOnly installation of OBIEE --> manually start config of OBI Installation --> same result as above!
    Perhaps you have some hints for me.
    Cheers
    Wolfgang

    Not in the slightest - I installed five just the other week
    All our virtual machines, running 2008 R2 x64. We went for Enterprise Edition, but I believe in CF9 they're both 64-bit anyway. These are the from the build notes I built up:
      Install extra roles:
        Application Server
        Web Server (IIS)
          Application Development
          IIS6 METABASE Compatibility
      Install extra Features:
        SMTP Service
    Other than that nothing else needs doing. It's worth noting (as a slight but irritating aside) that in 2008 R2 the SMTP service is set to Manual not Automatic, so you'll want to change that unless you want your emails to stop every time you reboot the box.
    But the actual install itself was far simpler than CF8 on 2008.
    O.

  • OEM grid 11 installation on windows server 2008

    Hi ,
    We have a 64 Bit windows 2008 server , on which we need to install OEM grid 11.
    For this we will be using :
    OEM 11 for windows 32 bit
    Oracle 11gr2 windows 32 bit
    Weblogic server 32 bit.
    the instalation order would be :
    1.Weblogic
    2. Database
    3. Grid
    Please suggest if these are the right versions and also if its ok to install 32 bit versions on them ? since I read somewhere that 64 Bit Db wont be compatible with OEM and weblogic.
    Thanks and Regards
    KK

    Hi Eric,
    Thank you for the suggestion.
    We have first installed the weblogic. Then the database and lastly the Grid.
    While installing grid , it was stuck at the 12th Step which was configuring the Agent.
    On checking metalink we came accross a note and followed the steps mentioned as it is.. So for the moment it was done..
    But now everything is up , inspite of that the grid aint visible.
    I am trying the following :
    http://hostname.domainname:7799/em
    and it just gives a blank image.
    https://kr.forums.oracle.com/forums/thread.jspa?threadID=1103539 speaks of the same issue.. I am going through it now..
    Regards
    Kk

  • Cold fusion 9 Installation on Windows server 2008 (IIS 7.0) - IIS websites not working ?

    I am having a 64 bit machine on which windows server 2008 R2 is installed. IIS 7.0 is configured and running on it. on which I have my organisations main website. I have to install Cold fusion on this machine as some of my site pages are designed with CF.
    I used all the default settings for installing cold fusion 9. It got completed succefully. But after I restarted my system and tried accesing my ASP.net website it was not loading the page. Text getting displayed was only as follows '<script> src="'. Later I unsistalled CF and my site was working fine.
    Please can any one guide me to successfully install Cold fusion without disturbing my main site deployed on IIS ?

    Sarfarajms, I don't recognize what about the CF install would conflict with ASP.NET, but I'll note this:
    If you downloaded CF 9 recently, you are still running 9.0--which does NOT formally support IIS 7. If you followed the steps about enabling IIS 6 compatibility and such (in the install guide or some blog entry), perhaps that caused the conflict.
    Instead, you will want to install 9.0.1 (CF 9 Updater 1, which is NOT provided in the current 9.0 install). THAT is the first release to formally support IIS 7. And if you read the updater installation guide (http://www.adobe.com/support/documentation/en/coldfusion/901/cf901install.pdf), it discusses how to deal with the upgrade depending on what you had done with respect to IIS, starting at the bottom of its page 8.
    Hope that helps.
    /charlie

  • Installation of windows server uninformed at retail.

    I purchased an Asus G75VX i7 64bit notebook computer last year that had windows 8 64 bit installed but it had server software also installed. There was no notification of windows server being installed and it was mask installation. You would have to know
    about computer configuration to recognize the installation. No company would admit that I had a weird installation purchased at retail even though I furnished Asus the computer two times to the Service center with it being returned two times with the same
    configuration. I furnished the registry to Asus and Microsoft and the computer Registry in win8 64 bit is 270MB and I stop counting pages in text at over 5000 pages. I purchased windows 7 home premium and on install it was configured the same way except the
    Registry was a little over 130MB and about 1400 pages. Who do I speak with at Microsoft about my situation or Asus?

    I am legally disable and I am a pro se litigator that has since 2007 self litigated in three civil actions in the United States Federal Courts with one all the way to the United States Supreme Court with all of my personal communication devices being illegally
    publicly hacked and my information being public shared.
    Telecommunications Access for People with Disabilities
    The FCC has rules requiring telecommunications equipment manufacturers and service providers to make their products and services accessible to people with disabilities, if such access is readily achievable.  These rules implement Section 255 of the
    Communications Act.  Where access is not readily achievable, Section 255 requires manufacturers and service providers to make their devices and services compatible with peripheral devices and specialized customer premises equipment that are commonly used
    by people with disabilities, if such compatibility is readily achievable.  The FCC has determined that interconnected Voice over Internet Protocol (VoIP) providers must comply with Section 255. http://www.fcc.gov/guides/telecommunications-access-people-disabilities 
    28 U.S.C.
    United States Code, 2011 Edition
    Title 28 - JUDICIARY AND JUDICIAL PROCEDURE
    PART V - PROCEDURE
    CHAPTER 111 - GENERAL PROVISIONS
    Sec. 1654 - Appearance personally or by counsel
    From the U.S. Government Printing Office,
    www.gpo.gov
    §1654. Appearance personally or by counsel
    In all courts of the United States the parties may plead and conduct their own cases personally or by counsel as, by the rules of such courts, respectively, are permitted to manage and conduct causes therein.
    (June 25, 1948, ch. 646, 62 Stat. 944; May 24, 1949, ch. 139, §91, 63 Stat. 103.) http://www.gpo.gov/fdsys/pkg/USCODE-2011-title28/html/USCODE-2011-title28-partV-chap111-sec1654.htm 

  • Problems LMS-4.2 Installation on Windows Server 2008 R2 Enterprise SP1

    Hi all,
    During the installation of the LMS-4.2,
    It passed the "Initializing" and "Copying" stages,
    but, in the "Configuring", it never finishes,
    Anyone had have a similar problem?
    the installer is for - LMS-4.2 and the OS is Windows Server 2008 R2 Enterprise SP1

    Thanks for the update. Glad to know it has installed now.
    There can be some port clashes and resource scarcity when other applications may be using it. Hence we recommend to have majorly LMS as the primary software on the server's.
    Also, LMS is not supported in other languages installers or setups except English and Japanese.
    There are a couple more things you can do/check prior to running the installation.
    LMS generally need Naming convention to handle long names/path etc. By default C: has 8.3 Naming convention enabled. However if you installed on different drive (for eg E:), for which this may be disabled.
    To check naming convention you can run the following command from Windows Command prompt: 
                                       cmd>fsutil.exe 8dot3name query <Drive>
    Example:
    C:\Users\winlau>fsutil 8dot3name query C:
    The volume state for Disable8dot3 is 0 (8dot3 name creation is enabled).
    The registry state of NtfsDisable8dot3NameCreation is 2, the default (Volume level setting).
    Based on the above two settings, 8dot3 name creation is enabled on C:.
    8dot3 needs to be enabled for all drives LMS will potentially use, including:
    Drive where TEMP/TMP is located
    The drive LMS is installed to
    The drive LMS backs up to
    Drive used for a relocated RME Shadow directory or other nonstandard paths written to.
    In some cases, altering the TEMP and TMP variables to be a short path (eg C:/temp or C:/tmp) may avoid the issue, but not always.
    Hence, to be safe, it is best to enable 8dot3name creation globally, either via the registry or Windows CLI
    Sample command to enable globally:
      "fsutil 8dot3name set 0"     
    Sample command to enable on one volume:
      "fsutil 8dot3name set X: 0"  
    Note that this needs a reboot to take effect.  You should not disable 8dot3name creation which already has it enabled, especially the system volume (usually C:). 
    For further information  http://technet.microsoft.com/en-us/library/cc778996%28v=ws.10%29.aspx
    -Thanks
    Vinod
    **Encourage Contributors. RATE them**

  • Cisco LMS 4.1 Installation on Windows Server 2008 R2, Databases not created

    Hi There,
    As always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:
    DCRServer is down or may not be completely up. Check if the DCRServer process is running.
    And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases. Attached is the installation log file, if someone could help me with it would be appreciated. Please note the following:
    1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.
    2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.
    Thanks,

    Also Here is more info output:
    C:\Program Files (x86)\CSCOpx>pdshow -brief
      Process               State                                     Pid
      Tomcat                Program started - No mgt msgs received    1572
      TomcatMonitor         Running normally                          2236
      Apache                Program started - No mgt msgs received    2436
      DataPurge             Administrator has shut down this server   0
      DCRServer             Failed to run                             0
      CMFOGSServer          Administrator has shut down this server   0
      EssentialsDM          Administrator has shut down this server   0
      ConfigMgmtServer      Never started                             0
      ConfigUtilityService  Never started                             0
      CTMJrmServer          Administrator has shut down this server   0
      ChangeAudit           Never started                             0
      SyslogAnalyzer        Program started - No mgt msgs received    2976
      ICServer              Running normally                          5096
      EnergyWise            Never started                             0
      PMCOGSServer          Administrator has shut down this server   0
      IPMOGSServer          Administrator has shut down this server   0
      IPMProcess            Never started                             0
      TISServer             Program started - No mgt msgs received    2544
      DFMOGSServer          Program started - No mgt msgs received    876
      InventoryCollector    Running normally                          3052
      Interactor            Program started - No mgt msgs received    5136
      InventoryCollector1   Program started - No mgt msgs received    5144
      Interactor1           Program started - No mgt msgs received    5308
      PTMServer             Program started - No mgt msgs received    5320
      UPMProcess            Never started                             0
      TISDiscoveryJobCreate Administrator has shut down this server   0
      SyslogCollector       Running normally                          5340
      Proxy                 Program started - No mgt msgs received    5348
      PMServer              Running normally                          5360
      NameServer            Program started - No mgt msgs received    5680
      NameServiceMonitor    Running normally                          5876
      LicenseServer         Program started - No mgt msgs received    5884
      FHPurgeTask           Never started                             0
      EventFramework        Program started - No mgt msgs received    5892
      EPMServer             Program started - No mgt msgs received    5904
      FHServer              Administrator has shut down this server   0
      NOSServer             Program started - No mgt msgs received    5580
      diskWatcher           Running normally                          5640
      DFMMultiProcLogger    Program started - No mgt msgs received    5864
      DFMLogServer          Program started - No mgt msgs received    4896
      DFMCTMStartup         Administrator has shut down this server   0
      DfmBroker             Running normally                          6104
      DfmServer             Running normally                          6416
      DfmServer1            Running normally                          6424
      DCRDevicePoll         Never started                             0
      CSRegistryServer      Running normally                          6432
      CSDiscovery           Never started                             0
      AdapterServer1        Program started - No mgt msgs received    6440
      AdapterServer         Program started - No mgt msgs received    6448
    C:\Program Files (x86)\CSCOpx>pdshow DCRServer
            Process= DCRServer
            State  = Failed to run
            Pid    = 0
            RC     = -3
            Signo  = 1073741821
            Start  = N/A
            Stop   = 07/02/2012 17:39:06
            Core   = Not applicable
            Info   = Application failed or was registered incorrectly.
    C:\Program Files (x86)\CSCOpx>net stop crmdmgtd
    The Cisco Prime Daemon Manager service is stopping..........................................
    The Cisco Prime Daemon Manager service was stopped successfully.
    C:\Program Files (x86)\CSCOpx>bin\perl.exe objects\db\conf\configureDb.pl action=validate dsn=cmf
    INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK locked for the operation...
    ERROR: [StandardDbUpgrade] : Database cmf is not installed.
    INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK released for the future operations...
    C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbpasswd.pl all
    ERROR: There is no database available to change password.
    C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbRestoreOrig.pl dsn=cmf dmprefix=Cmf npwd=pwd
    'cmf' is not a valid data source for the product.

  • FEP 2010 installation on Windows server 2012

    Hi all,
    Is there any step- by step guide to install FEP 2010 on windows server 2012 R2?
    We need to have this in place till the time, we get our FEP upgraded.
    Regards

    Hi,
    It seems that you can only follow the official document to install FEP on Windows server 2012 R2.
    Please verify that your environment meets the prerequisites before installation.
    http://technet.microsoft.com/en-us/library/gg412482.aspx
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for