64-bit Win 7 and new Mac Mini

I have the newest Mac Mini (HDMI and 2.4GHz Core 2 Duo). Boot Camp's online PDF document says that Mini's can't run Windows 7 64-bit. I am assuming this is wrong now with the even more powerful Minis on the market.
Can you run 64-bit Win 7 on the newest Mini?

Yeah, I wrote this wrong. Its ITunes has stopped working and Windows is trying to solve problem, then shuts down.
I have un-installed , re-installed. Tried earlier version and that wont work any more. Changes firewall, pop-ups whatever...........nothing works. And Apple has been no help. Run test and it says all test are good even to Apple store??

Similar Messages

Problem with USB speakers and new Mac Mini

I have a USB sound system consisting of a pair of Harman Kardon soundsticks and a woofer from probably 10 years ago (bought and used originally with a Mac). I have tried driving it my new Mac Mini. It works fine for about a minute; then the music stops. Here's what I've tried to diagnose the problem:
1. The problem does not occur when these speakers are driven from my Macbook Air (about 3 years old).
2. The OS and iTunes software is up to date on both machines (10.9.5 and 12.0.1.26).
3. It does not depend on which USB port I use on the Mac Mini.
4. Using a port on a USB extender on the Mac Mini does not solve the problem.
5. The iTunes Preference settings are the same on both machines.

Sorry, no actual experience with USB Audio devices.
I found this in the Pro forum, but the outlook doesn't seem good:
http://discussions.apple.com/thread.jspa?messageID=1739084&#1739084

Ichat video hosting and new mac mini

I understand that one cannot host a 3 way video chat with a G4 machine,which I have.
Can one host the 3 way video chat with a new Intel Mac mini?
And does it matter that the other 2 participants would be using G4 machines?
Regards
J

Nobody has answered the question which was whether multi chat would work with the new Intel Mac Minis.
I have one on order so I guess I will be able to give you the definitive answer in a couple of days however I would expect that both the single and dual core Intel minis will have the horsepower to run Multi Chats.
Powerboost is a great workaround for G4 Macs and I can confirm that a G4 1Gig Powerbook is more than capable of running a 3 way multichat with this program installed.

HP P1102w and new Mac Mini not talking...

Hi All,
This is a similar issue to all the other threads involving the P1102w and Lion. It is a little different in that the printer is already on the network and running successfully with 2 other minis, 2 iphone 4s, and 2 ipad2s... it just wont work with the new mini.
I have read over many threads and seen lots of different answers and solutions but I didnt want to just jump in and start messing things up when there is (maybe) a simpler fix.
I know that the printer firmware is up to date, at least to a month ago when I installed it the first time. I do have a windows laptop if the solution is to do the HTML config I saw in another thread.
So, if anyone can point to the solution to this isue I would be forever greatful.
Thank you for your time in this matter.
Cheers,
Alex

See if it's related to this...
The 2012 macs (and later apparently) not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"

Powerbook and new Mac Mini compatibility

I'm considering purchasing a new intel-powered mac mini with airport express to use as a house server.
In addition, as I can't afford to replace my G4 powerbook just yet, I was hoping that I might be able to use the Macmini as an short-term alternative for intel-enabled software.
So, my question. Could I network my G4 powerbook and new macmini in such a way that I could run intel-enabled software on the mini, via my powerbook screen and keyboard. Effectively using my powerbook as a dumb terminal for the macmini.
Is that possible given the chipsets?

MacEnstein. Welcome to discussions!
Best to start a new question - many people will stop looking here since it is marked answered. This lets you get the attention you deserve and keeps one problem per thread.
But - we are here - so let's see what happend.
Bonjour will find computers on the same network. That means unless you have gone to pains to set up two DHCP servers and change things substantially - things will work on most home networks.
Open the terminal application on both computers and do a netstat -nr - each should have the same gatway for the default destination and same network destination (look for 192.168.1/24 or similar) under the Gateway column where it says link#4
Most likely you will have IP addresses like 192.168.1.1 and 192.168.1/24 - feel free to start a new thread or post your netstat -nr results of it's not clear what I'm doing.
Also - you can simply test this out from the command prompt. Each machine is known by a host name - type hostname -s on each. If Bonjour is going to work - machine "a" should be able to ping machine "b" as follows:
ping b.local
the .local says use Bonjour to find the machine named b and ping it.

New Mac Mini USB problem

I have a brand new Mac Mini (December, 2011, 10.7.2) as well as an older Mac Mini (circa 2005, 10.6.4).
I bought a new GearHead USB wireless mouse to go with the new mini.
The mouse works fine on the old Mini (and also on a Windows PC).
On the new Mini, the mouse works until the Mini hibernates or powers down. On wake-up, the mouse doesn't work until I unplug and replug the USB transmitter. This is the case on all USB ports on the Mini, as well as on the keyboard and monitor USB ports. It doesn't matter which port I use or which port I unplug and replug into - I always need to unplug and replug the transmitter to get it to work after power- or hibernate-cycle.
Note that I have also tried a Logitech USB wireless mouse and an Apple Bluetooth mouse and they both work fine on both the new Mini and the old Mini.
The problem is only occurs between the Gearhead brand USB mouse and New Mac Mini (10.7.2).
I assume that the problem is that the mini is powering down the USB port and not refreshing it after power cycle, until I unplug and replug the transmitter. Alternatively, I suppose, the transmitter could be asserting itself early in the boot process before the Mini is awake enough to hear it. In either case, it seems that the band-aid fix is a command-line to force the OS to refresh the ports, but I can't find any reference to such a command.
Thank you for any help you can provide.

Hello,
I assume that the problem is that the mini is powering down the USB port and not refreshing it after power cycle,
To me it seems like when the usb is powered down the trnasmitter loses the signal with the mouse, i think your mini is perfectly fine, even though the mouse works fine on the old mini I think its how the transmitter handshakes with the new mouse on the new mac mini. Do you have a new mouse of the same brand that you can test and see if it has the same issue...
If so then it forsure the transmitter... not the mini... else take your mini in for health check.
good luck, let me know how u go...

I recently bought a new macbook pro and set it up using the migration assistant and my mac mini. I can't get the text message forwarding feature to work with both computers.

I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

New Mac Mini and iMovie6, & iDVD

Hi
I was wondering if someone can answer these questions for me. I have a 12" powerbook and iMac 800mhz power pc G4 (lampshade kind), and I have been editing movies in iMovie and creating DVD with iDVD. But it's getting a bit slow.
I was thinking about getting the new Mac Duo core mini 1.83 GHZ with 2 gig of Ram to use as editing bay (iMovie) and to create DVD using iDVD.
Is the new Mac Mini good enough for that? Has anyone encounter any problem with previous mac mini using iLife? I don't edit a lot, maybe twice a year, 1 1/2 hour or 2 hour project. I already have external monitor (viewsonic) and apple keyboard and mouse.
or is it entirely better to go with iMac 24 inch.?
Any thoughts?
Alex

In context, the current $799 Mac mini has very similar overall performance to my G5 2.0 dual processor power mac, bought in October 2003, so while the drive is slower (not all that critical in video editing work since 5400rpm is certainly sufficient) a mini will perform notably better in iMovie, and render to iDVD much faster than your present 800MHz PB. Certainly, comparing the performance of my 800MHz TiBook in iMovie and Final Cut Express against even the older 1.5GHz G4 mini with IGb RAM, the mini was far smoother and more responsive to use.
There's no doubt that a 24" iMac would provide a faster, richer, environment in which to work, and if your budget would extent to that system it would seem a poor choice not to opt for that, but as has been said many, many times in these discussions, it's also worth bearing in mind that the mini's performance and capabilities are not defined by it's size. A Mac mini is far more powerful than merely for basic computing needs!

I'm new to Mac. I have an iPhone and a Mac Mini. My original iTunes was on a Windows computer that crashed. So, all of my iTunes Music and Movies are gone. How do I get the movies and music from my iPhone to the new Mac Mini?

I'm new to Mac. I have an iPhone and a Mac Mini. My original iTunes was on a Windows computer that crashed. So, all of my iTunes Music and Movies are gone. How do I get the movies and music from my iPhone to the new Mac Mini?

If you still have the crashed Win computer, you may be able to recover your music and movies from the hard drive. If you have a friend with a hard drive USB connection kit and a PC, they should be able to help. Otherwise, check locally for computer services that might do that for you (I think Best Buy Geek Squad may be able to help). If the drive itself is in good shape, it shouldn't be too expensive.

Airport Express problems with new MAC MINI and DLINK router SOLVED

Hi just thought I would post this as it may well help others experiencing similar frustrations with new core duo mac mini and wireless connection or quality problems across the network / internet etc
I have a 3 week old, new mac mini core duo 1.8ghz 2gig ram, 120gb disk - First Mac, connecting to my exisiting wireless network via DLINK ADSL Router 2MB Broadband also one windows laptop and pc also wireless on the network and two airport express potins to stream itunes to
Problem was briefly
Mac worked fine, but the network connection just far too slow, laptop and pc, 1800+ kbps downstream mac mini 90 - 150kbps (http://www.adslguide.org/tools/speedtest.asp)
also if i ping the router directly from terminal (ping -c 20 192.168.1.1) average response 12+ ms with 20% packet loss, yet laptop and pc avg 2ms no losses
Spent 2 evenings on frustrating calls of more than 1 hour each (due to being cut off , then ring back and closed etc etc) and carrying out a the helpdesk troubleshooting (I am an IT consultant I think I am above this level), eventually an archive and install of the os as well
last night I call for the third time, insisting I dont wish to carry out any further troubleshooting, and want it replaced and resolved or my money back
I receive a call back from product specialist (not sure if thats mac mini specialist or airport) but we resolved the issue (his knowledge far superior to the help desk do this do this attitude)
between us we carried out the folowing and resolved the problem and I am now very happy
mac now downstreaming also in excess of 1800kbps (as expected for 2mb broadband)and no packet loss
This problem was resolved by switching off the turbo option hidden away in the routers settings, under wireless configuration
Supposed to improve performance, but its rubbish and will make hardly any difference under mac os to the speed but will certainly affect your mac mini performance(you may have a similar setting switched on in your routers and mac os dont like it)
We stumbled across this by first disconnecting one of the airport express devices from my dlink network, and using it on its own default apple wireless settings, effectively making it a standalone wireless network, and not via the dlink router
we then carried out the same ping with the ip address of this device (from airport admin utility default 10.0.1.1) and the results were fantastic 2ms avg no package loss
this established it was something with the router, and how we then interrogated the routers settings and found the turbo on option within wireless configuration
you may not be able to replicate this if you dont have an additional network you could join (such as airport express), but probably worth checking your own router settings for something similar
Hope that may be of assistance to others, sorry that its a bit long winded and garbled, but I'm just so excited to finally get my new mac working as i would expect it to
Also perhaps insist on speaking to a product specialist immediately that the helpdesk are unable to help you

Hello macfar14. Welcome to the Apple Discussions!
For just streaming iTunes and/or for sharing a USB printer, the AirPort Express Base Station (AX) just needs to be configured as a wireless client ... which you already attempted to do.
Just to be sure nothing was missed, here are the basic steps to do this:
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing wireless network's Network Name or SSID>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

Created 3 partitions on new Mac Mini, deleted one, and now Bootcamp wont boot anymore! Need help please!

Here's my dilemma. I have a new Mac Mini - a week old. I installed Windows 7 on it using Mac's Bootcamp assistant. I then set up and configured my Windows 7 world and everything worked fine. No issues logging in between Lion or Win7 via the restart/option key procedure. Well, yesterday I split my Mac HD partition one more time to create a third partition (was created as an "extra", e.g. possible future partition for another operating system). After creating it, I then decided that I didn't really need it. So I deleted it in Disk Utility and attempted to drag the Mac HD partition line downward so as to "fill in the gap" and reclaim the lost hardrive space. It seemed as if I could reclaim about 1 gig or so, but I figured...oh well.
Well, the Mac HD partition seems to work just fine, but now I've noticed that I can't get into the Bootcamp partition anymore. It wont boot. If I try to verify the partition [doesn't even give me "repair" as an option), then it fails and gives me the following error message: "verify volume failed. invalid request." When I go to the Startup Disk option in my System Preferences section, it displays the bootcamp partition as a folder and not as a drive anymore.
I'm assuming that I messed up some permissions or lost some vital links during my attempted resizing/reclaiming of harddrive space. How do I fix this without having to reload either all of my Mac info or all or my Win7 info? I'd hate to consider the last two days of my life loading this crap up a complete loss.
Thanks in advance!

Hi surroundsound,
you can't put more partitions on internal HD once you install winOS with Boot Camp.
The sure fix is to delete the windows partition (with Boot Camp Assistant, not Disk Utility), then getting rid of the extra partition (with Disk Utility).
then you can re-install your win& (recreate the win. partition with Boot Camp) - don't add any partitions after.

New Mac Mini and Analog TV

I just bought a new March 2009 Mac Mini. I am trying to hook it up to and old analog TV. The TV has SVIDEO and RCA jacks. I purchased the Apple Mini-DVI to Video Adapter only to find out it will not work with the new model. It seems the new model only outputs DVI-D and not DVI-I.
I am trying to hook up the mini-dvi to SVIDEO on the back of my TV and then for the audio connect them to the TV with RCA jacks. Is there any way to get the new mac mini to work with an analog TV?
Thanks

When you cite "VGA converter to RCA" do you mean a little box that actually converts the signal down to RCA/composite, like this:
http://www.monoprice.com/products/product.asp?cid=101&cp_id=10114&cs_id=1011407&pid=4724&seq=1&format=2
or simply an adaptor like this one:
http://www.monoprice.com/products/product.asp?cid=104&cp_id=10401&cs_id=1040113&pid=2509&seq=1&format=2
The crucial thing I'm waiting to find out is whether the new Minis provide ANY analog video signal to either of the video ports at all (which would seem to be the case, since VGA is analog, right?), or if the analog roadblock is simply caused by the currently available adaptors.

I have a new Mac mini and are using an Acer monitor. Unfortunately, the Acer will not show any image on a startup from cold. It does however work completely correctly when restarting from 'sleep' condition. Can anyone help? Thanks in anticipation.

I have a new Mac mini- changed from Windows XP. I have a peculiar problem. I use an Acer monitorwith the Mac which works fine when the Mac is 'un-sleeped'. But, if I have shutdown the Mac the Acer does not recognisethe start up - at least it shows nothing on screen. When I have shut down - nowknowing the problem, I use an old Samsung monitor to cope with the start up -it does so fine - and then put the Mac to 'sleep', then change monitors andrestart the Mac - the Acer is now fine. I am using the same cables for theSamsung and the Acer. The Acer had no problems with my old Windows system -from sleep or shut down. I really do not think there is anything wrong with theAcer - could it be some sort of recognition problem? Please can anyone assist.Donald Picton

I posted the same question a day ago with no response. I'm using an Acer x193w. You actually don't have to switch monitors to get it to work. Just make sure you turn off the monitor after shutting down the Mac mini (actually push the power button on the monitor, not just let it go to sleep). If you turn on the monitor (push the power button on the monitor), then power up the Mac mini, the monitor is recognized. The issue didnt exist with Snow Leopard for me. It only started after I started using Lion. Hope this issue gets fixed In a future OS update.

Got Lion with new Mac mini and want to install on imac

Hi,
I just bought a new mac mini with lion. and now i want to install Lion on my imac.
Is there a way to register my purchase of lion on appstore so i can download it from there?
//Stefan

You'll have to pay for the App Store version of Lion needed for the iMac. The license for Lion that you get with a new computer is different from the App Store license, and doesn't provide for multiple installations.
From the Lion Software License Agreement, which you can download from here:
http://www.apple.com/legal/sla
2. Permitted License Uses and Restrictions.
A. Standard and Preinstalled Apple Software License. Subject to the terms and conditions of this License, unless you obtained the Apple Software from the Mac App Store or under a volume license, maintenance or other written agreement from Apple, you are granted a limited, non-exclusive license to install, use and run one (1) copy of the Apple Software on a single Apple-branded computer at any one time. For example, these standard single-copy license terms apply to you if you obtained the Apple Software preinstalled on Apple- branded hardware.
B. License from Mac App Store. If you obtained a license for the Apple Software from the Mac App Store, then subject to the terms and conditions of this License and as permitted by the Mac App Store Usage Rules set forth in the App Store Terms and Conditions (http://www.apple.com/legal/itunes/ww/) (“Usage Rules”), you are granted a limited, non-transferable, non-exclusive license:
to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple Software directly on each Apple-branded computer running Mac OS X Snow Leopard or Mac OS X Snow Leopard Server (“Mac Computer”) that you own or control;

I have a new Mac Mini, and I want to send raw video...

I have a new Mac Mini (Lion), and I want to send raw video to the Internet, using Ustream, Skype or other services. I don't need cameras, microphones, or other periphrals. My video consists of 1 volt composite (from a video switcher), and the audio is full stereo at 600 ohm line level on each channel. What do I need?
I have a video capture card on my Windows machine; but the results have been crappy at best. And the so-called "Geek Squad" at Best Buy (where I bought the Mac Mini) have been less than helpfull. Further, the on-line Apple Store shows nothing. Maybe someone here has an idea.

You are going to need a video capture device of some sort and I believe the following will be suitable.
http://www.elgato.com/elgato/int/mainmenu/products/Video-Capture/product1.en.htm l
It is available in the US as well http://www.elgato.com/elgato/na/mainmenu/products/Video-Capture/product1.en.html

64-bit Win 7 and new Mac Mini

Similar Messages

Maybe you are looking for