64 bit Windows 7 PC. Need Laserjet 1022 print drivers.

Hello, I have a PC that is running 64 bit Windows 7. I also have an HP Laserjet 1022 printer. I am unable to find a printer driver to make this printer work with this computer. Can anyone please help me to find the correct driver for this application? Thanks,
Rick

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=439432&lang=en&cc=us&...

Similar Messages

Cannot install driver for HP Laserjet 1022 Printer.

I am running Windows 7 64 bit. When I attempt to install the driver for the HP Laserjet 1022 Printer, although the software recognized that the printer existed (ergo must be plugged into the computer), I keep getting the message that installation is being held up until I connect the printer to the computer. Any suggestions?
Thank you

Hi mtnkeena2,
Use a different USB cable to see if the computer can then see the printer.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HP laserjet 1020 printer Drivers for iMac

Please, where I can find out HP laserjet 1020 printer Drivers for iMac OSX 10.9.2 ?
Thanks.
JHBarbosa
This question was solved.
View Solution.

Your answer solved my doubts. Now, it's clear to me what I have to do. Thanks.
JHBarbosa

Hp laserjet 1022 printing problems

Hi,
I use at my office a HP laserjet 1022 printer. Is used in a wireless router.
I have a problem with printing:
When i print a document from Google Docs, after the document was printed, the printer comes offline and all 3 leds start to flash. This flashing repairs only if i restart the printer.
When i print from my mac, all works good, other sites also works. The problem is, i use google docs for my work, so i cant exclude this.
I use a MPB mid 2012 with OS X Mountain Lion installed.
Anybody can help me?
Many thanks,
Regards,
szabomatrix

Hello Szabomatrix,
Thanks for the post. I ran across this thread that may address this issue. Just curious, with your case, do you experience these symptoms when printing PDF's/Adobe? Good Luck!
http://goo.gl/zTGcl
I work for HP but my posts and replies are my own....Thank you!

Can't install drivers from HP for laserjet 1022 printer on my new computer with Windows 7.

I have a laserjet 1022. I can't install the HP drivers provided on the HP website onto my new computer. When it asks me to connect the printer, the printer is recognized, however the message continues to say waiting for the connection. I have tried all of the suggestions listed on the forum by both HP and other individuals, including down loading the drivers from other countries. Other attempts when downloading the drivers ends up with a message saying that the download could not be completed. I have tried other USB cables and that doesn't work. I love HP products but I really need help on this one. HELP!
Regards,
Day Trader
This question was solved.
View Solution.

Hello DayTrader,
When you connect the printer and if the message continues to say "Waiting for Connection", please try the below step..
Go to Device Manager, ( to do so , Right click on Computer icon, Select Manage, from the left pance m click on Device Manager , which would display the Device Manager on right pane.)
There should be Yellow bang entries ( Yellow ! mark ) with printer name on it.
Right Click on each of them and select Update Driver.
Select "Browse my Computer for driver software "
Click on Browse button to point to the CD ( if you are using the CD to run the installation ) else copy the path where the drivers have been extracted if you had downloaded it. Usually it will be in folder with name starting 7z... under TEMP folder .
Then Click Next button .
Regards,
Jabzi
Help the community by marking this post .
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Windows 7 - HP Laserjet 8500 print driver problem

I have tried everything imaginable to correct this HP 8500n print driver problem with no success, please help!
I cannot correct or get rid of a reoccurring “Incompatible Print Settings” error dialog box message that repeatedly states that “There are one or more conflicting settings. One of the settings is: Output Bin: Mailbox 1, Accessory Output Bin: Not Installed”. The radio button options are “Restore my previous settings or Keep this setting, and I will change it later”. This same dialog message repeats 13 times for all the other various conflicts each time you click on printer properties to change to 2 sided printing or any other printer settings. This printer does not have any of these features attached or set into it.
I am a volunteer that manages a number of computers on our small church LAN, 2 computers operating on MS XP-SP3, 2 on MS Windows 7 Home Premium and my 2 problem computers that came pre-installed with Vista Home Premium of which I have performed an HP OEM upgrade to Window 7.
I have isolated this print driver problem to the Vista operating system and even when computers are upgraded to Windows 7 does not correct this driver error. I have also tried every possible print driver variant of the HP 8500, HP8550, PCL, PS to include the Microsoft versus HP versions with no success. In each case I get this error yet neither of the XP computers or the computers that had Windows 7 as a original operating system have no problems with their print drivers for this printer.
Yes, I have repeatedly searched and upgraded the operating system and print drivers. In desperation I have even tried to find the correctly behaving Windows 7 print driver and transfer it to these Vista upgraded to Windows 7 machines. However I could not isolate the driver location.
The only thing I can conclude is that this errant HP print driver was resident within Vista and remains resident even after a HP OEM Windows 7 upgrade. Additionally, all of these computers are configured to access this printer via its static IP address on the network. The XP computers are 32 bit, all of the Vista upgraded to Win 7 and OEM Win 7 computers are 64 bit machines all with respective OS.
Can anyone please help me correct this problem?

Hi,
Unfortunately I can't see your uploaded image yet as it is awaiting approval from HP.
From what I can see you are correct that HP does supply drivers for this printer and that the drivers for your printer are already included with Windows 7. On the machines affected, try the procedure below to see if it helps at all
Next download revo uninstaller on the link below and install it.
http://www.revouninstaller.com/download-freeware-version.php
Disconnect the printer from the PC.
Run Revo and see if it finds any HP Printer Software installed. If it does, right click the software icon and select uninstall. During the process you may be asked to delete registry entries. If you are, just select all and click delete. Do the same for any left over files and folders. Once completed, reboot the PC.
Re-connect your printer to the PC and follow the guide below.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536257
If this helps you will need to repeat the process on each of the affected machines.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP Color LaserJet CP1215 Printer drivers location

Where on my hard drive has the ljcP1215-HB-pnp-win32-en.exe file from the HP Color LaserJet CP1215 Printer support page installed the needed drivers?

Hi @zenny ,
I can help you with locating the drivers on the computer.
Here are the instructions for running the Plug and Play drivers.
Click the Download only button and save this file.
Double click on the downloaded file. The self-extracting process will appear.
Click to accept the terms in the license agreement. Click Next.
Driver installation begins. Driver files are pre-installed during this process.
A screen pops up to prompt to connect the USB cable. Insert the USB cable.
Device is connected, waiting for PnP to finish installing driver.
Click Finish to complete software installation.
They extract to the temp folder on the computer.
Press the Windows key and R at the same time, to show the run command line.Type in %temp%. The folder should start with 7z.....
Depending which operating system you are using, I would suggest downloading the Full Feature Software and Drivers if you are still having issues with the Plug and Play drivers.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Windows update requirements for Xerox print drivers on Windows 2003 server

Hello, We are currently deploying a fleet of Xerox MFD's across ~100 locations, and we are running into an issue installing the print drivers on some Windows Server 2003 (32bit) boxes. (both the machine specific driver, as well as the Xerox Global print driver) The print driver installs fine, but no jobs will actually print, and if you try and print a test page, an error "Test page failed to print. Would you like to view the print troubleshooter for assistance?" comes up instantly. We have seem to have narrowed the problem down to a missing Windows update, as if we do all available High Priority and Optional updates, it starts to work fine. Does anybody know specifically which Windows updates are a requirement for the driver? Our 2003 servers were last fully updated about a year ago, and due to time constraints, if we could just install the Windows updates that are needed it would be a big help. Thank you in advance

When Xerox dropped support for XP, they stopped adding particular files from the driver packs (probably for size reduction) because they were all included by default in every newer OS. If you install this here on any XP/2003 base machines it will work as normal. It is best to install that before the driver install, but I have been mostly lucky to have it work fine days later. YMMV

Mac 10.6.5 HP LaserJet 1022 printing problem persists

Hi All,
I still couldn't get my HP 1022 prints after updating to 10.6.5 where the release said it fixes some HP printer problem connected to Airport Extreme. (http://support.apple.com/kb/HT4250) Mine is connected to Airport extreme too. Installed the 2.5.2 HP printer update too!!
When I print document with multiple pages, the alert LED started blinking after printer the first few pages... Sigh... I did those reset printing system procedures and restarted my Airport extreme... no dice...
Wanna ask if other HP LJ 1022 printer owner has got their problem solved or not.
Thanks
Bill

Hello,
*BUGS IN UPDATE OS-X 10.6.5*
Updating new or older Intel Mac's to snow leopard to 10.6.5 will result in problems
with several HP printers (both wired and wireless with airport express basestion).
It doesn't mather if you also update the HP-printersoftware to version 2.5.2.
The problem exists...
After printing only one page, all the lights on the printer itself are flashing
(see also youtube video from German Apple users: http://www.youtube.com/watch?v=0s7gZYA2Kj4)
No more than one page is printing.
And the printer won't print anymore, untill you turn it off and back on (hard reset).
SOLUTION
Connect the HP printer (for instance the HP 1022) wired to your Apple Intel computer.
Choose the Gutenprint driver (in stead of the HP driver 1.3.0.261) when adding a (standard)
printer in System preferences.
The printer will now work fine.
Unfortunately the Gutenprint driver won't work in combination with with wireless printing
to a HP printer with a airport express basesation.
*EPSON printing problems*
Other printer problems are reported with professional Epson large format printers.
Several Epson drivers won't work in OS-X 10.6.4 and in 10.6.5
Not directly and not tru a RIP printing server (Windows or Mac).
The temporary solution is choosing a general post script printer driver,
in stead of the Epson driver, when adding a printer in system preferences.
Good luck!
Best regards,
Danny Rorije Consultants
The Netherlands

HP LaserJet 1022 Printing Problems - Please Post Here

Sorry, I hate to create a new thread, but tracking so many different threads on this one issue is becoming problematic for me. So with that being said, if you are still having a problem with printing to a LaserJet 1022 after the full uninstall I detailed in the FAQ thread followed by installing version 2.2 of the HP driver package, then let me know here. And specifically I want to know is which device you have, how your device is connected, the print driver version, and what apps are giving you problems. In my own personal testing, here is what I have found:
USB direct connect - OK, I have yet to run into a problem here.
USB connected to an Airport Extreme N - OK, I have yet to run into a problem here.
USB connected to an Airport Express G - Paused problem. I got print job/page out and then the printer paused and would not resume. I don't have a functioning work around here yet, but I'm trying.
So if I were going to fill out my own form, it would look like this:
Printer: LaserJet 1022n
Connection: USB connected to an Airport Express G (Firmware version 6.3)
Driver Version: 1.1.0.182
Apps: All
Problem Description: Printer queue goes into a Paused mode and won't resume
And to get you started, I have left a blank template at the end of this post.
Also please make sure to include whether you have the 1022, 1022n, or 1022nw AND how it is connected to your Mac. If users of the 1020, what to chime in on this thread that is OK. Anyone else, please post in the FAQ thread or a different device specific thread. As the 1022 seems to be the most problematic at the moment, I'd like to track this down as quickly as possible.
Just trying to help.
Andrew
=====
Printer:
Connection:
Driver Version:
Apps:
Problem Description:

Printer: LaserJet 1022
Connection: USB connected to an Airport Express N (latest firmware, etc)
Driver Version: 1.1.0.182
Apps: All
Problem Description: Can sometimes print a single page but then all status lights flash on printer and I have to turn the printer off - other times, nothing happens (printer pauses and will not resume). Have tried connecting via Bonjour and IP address but same problem occurs.

LaserJet 1022 - printing rubs off!

We recently sent a direct mail marketing piece, and when one item was returned, we noticed that the print had largely rubbed off both the letterhead and envelope. We use a standard stationary (NEENAH Bond - 25% cotton). What are your thoughts? Thanks in advance.

Printer: LaserJet 1022
Connection: USB connected to an Airport Express N (latest firmware, etc)
Driver Version: 1.1.0.182
Apps: All
Problem Description: Can sometimes print a single page but then all status lights flash on printer and I have to turn the printer off - other times, nothing happens (printer pauses and will not resume). Have tried connecting via Bonjour and IP address but same problem occurs.

How can I wirelessly print from a 64-bit Windows 7 laptop to a printer on a 32-bit Vista laptop?

My DeskJet 722c is connected to my 32-bit Vista computer. I would like to print documents out on the printer from my 64-bit HP ProBook S-series laptop, which is running on Windows 7. I can do this if I disconnect the printer from the 32-bit computer running on Vista and connect it to the computer running Windows 7. But I don't want to go through the hassel. How do I connect to the printer from my Windows 7 computer, going through my Local Area Network? Do I need to install a Windows 7 driver on my Vista machine? Do I need to install a driver for Vista on my Windows 7 machine? If so, how do I do this? I'm confused

Hello-
I don't think your printer has network ability.
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
Donald

Flash.ocx MISSING - 64 Bit & Windows 7 NEED HELP

When i launch a application that requires flash a error message sais: This application requires Flash.ocx wich isen't in this version of windows.
How should i fix it?
Windows 7
64 Bit PC
Flash works on google chrome, Firefox, IE and other browsers, but not on etc my own apps..

function(){return A.apply(null,[this].concat($A(arguments)))}
23565464575263 wrote:
Flash works on google chrome, Firefox, IE and other browsers, but not on etc my own apps..
So you are invoking Flash Player in your own apps - where did you find the instructions how to do so? You are obviously not using the correct instructions, as your apps are looking for an old version of Flash Player (Flash.ocx).

How to change 32 bit windows to64 bit windows--I need explicit steps (I guess)

thought I'd just put in 64bit windows, boot up and install (then update drivers, etc)
but get message that there isn't a valid operating system on installation disks
any help would be appreciated W700 with windows business 32bit vista
thanks,
Jeff

Here is one:- http://forum.notebookreview.com/showthread.php?t=144783
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Hp laserjet 1022 windows 7 (64 bit) won't install printer, what can i do?

1. HP LaserJet 1022 Printer
2. Windows 7 64-bit
3. No Error Message
4. The only changes made to the system are security upgrades from Windows Updater. This is a new computer and the old one was running XP.
I have tried removing the printer, downloading newer software (lj1020-HB-pnp-WIN64-en) and trying to install it, adding the printer through windows and still the printer will not work. The cd version will run until it asks you to plug in the printer and then nothing happens. I even tried leaving it running overnight to see if it would find it and install, but nothing happened. This printer is a workhorse for me and I would like to keep it running, any suggestions on getting this printer recognized and running again?
This question was solved.
View Solution.

In the Device Manager see if the 1022 is listed under Other devices.
Under "Other devices" right click on HP 1022
Select "Update Driver Software...."
Select "Browse my computer for driver software"
Select "Let me pick from a list of device drivers on my computer"
Select "Printers" > Next
Under "Manufactures" > HP
Under "Printers" > HP Laserjet 1020
Select "Yes" to warning popup
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

64 bit Windows 7 PC. Need Laserjet 1022 print drivers.

Similar Messages

Maybe you are looking for