64 bit windows and odbc connection

I am new to the forum, so please bear with me. We have developers that have to run in Win 7 64 bit. I have installed Crystal Reports 12 on three systems. I used the c:\windows\SysWOW64\odbcad32.exe to set up the ODBC. BTW, this is an Intersystems Cache 32 bit driver. The connectivity tests ok from the Data Source Administrator. When I open Crystal Reports and go to Logon Log off server, it does not see the connection at all. If I try to run a report, it does not see the connection.
The kicker is, I got it run on one system, but not the other two. They are setup identically. I suspect that I tried so many different things to get it to work, that I lost my way. I do remember doing something with the registry on the one that finally worked
I have tried 64 bit drivers from Intersystems and 32 bit. It was the 32 bit driver that finally worked on one system. It could be something in the registry, but I sure canu2019t find it!
I have been through dozens of posts and all over the Internet looking for a solution. Everybody says to use c:\windows\SysWOW64\odbcad32.exe. Apparently, that's only part of the story.
We use Crystal Reports a lot and I need to get this resolved. I appreciate any help you guys can give! Thanks, Beckyc

Hi Beckyc,
Start off with this [Module |https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip]utility, you can compare the list files from the one working PC against the none working ones.
Did you create the DSN under the System Tab? If not try that.
Then compare PATH statement between the 2 PC's. Not sure if the Client needs it specified or not.
If that fails then Download Process Monitor from Microsoft and then compare log files for the database DSN.
And then you can enable ODBC Tracing, it may tell you also.
If CR can't see the DSN it's somethign in the environment causing the problems.
Have you contacted Intersystems Cache to see if they can explain it?
Don

Similar Messages

  • Open discoverer report in new browser window and without connections page

    Hi All,
    We are using Oracle 11g Discoverer 11.1.1.4.  Requirement is to open the discoverer report in a new browser window and without connections page.
    When we are running discoverer reports with this parameters we unwantedly get the connections page of the discoverer plus which we don't want.
    Went through the documentation given in this page and followed it still the issue persists, and i see couple of threads with my issue and no updates.
    This excerpt is from the documentation available in the link
    " _plus_popup=true and framedisplaystyle=embedded launches Discoverer Plus in a new pop-up browser window that contains the Plus applet embedded in it "
    http://www.art2dec.com/documentation/docs/oas10g1012/linux/bi.1012/b13918/urlstart.htm
    and Here is what we use to invoke our reports.
    http://ipaddress:port/discoverer/plus?cn=cf_123&_plus_popup=TRUE&framedisplaystyle=EMBEDDED&wb=disc_wb_1
    Request the forum users from PRO discoverer group to help me out of this issue and expect a good discussion on this.
    Thanks in advance

    Closing the thread
    We were able to achieve by changing the browser settings in the IE 8 Browser. Disabled Tabbed browsing.

  • Windows 7 64 bit and ODBC connect to Sql data source

    Hi
    Just porting a simple test form over to new laptop with windows 7 64 bit and my odbc connect strings are not working properly.
    They seem to work with Microsoft access, but not livecycle designer.
    I tried the 32 bit ODBC drivers, and at least I can see the first record, but now I get an error when I try and execute a drop down to select a different record.
    Looking at the forum history, a lot of Windows 7 issues but did not see one for ODBC connections....
    Anyone have ODBC working on a Win 7 64 bit system?
    Do they work?
    Do the 32 bit drivers work?

    I believe that the 64 bit drivers are NOT working
    the 32 bit drivers are working.- have them working now!

  • Getting sqlplus and odbc connection to work

    I'm looking to automate some data extraction activities either through a windows batch file or set up a data connection in an excel spreadsheet. I've installed (I think) the instant client, but, I'm not seeing any programs to run in my start>All Programs list except Microsoft ODBC Administrator and sqlplus does not work when typed at the command prompt (sqlplusw neither).
    Not sure what I should do next...thanks for looking and your help.
    I currently use sql server and access and have set odbc connections and connections to sql server in excel.
    Here's what the inventory shows:
    Inventory contents of (my-computer):
    Oracle Homes
    OraClient10g_home1
    Oracle Client 10.2.0.1.0
    Oracle Instant Client 10.2.0.1.0
    Oracle ODBC Driverfor Instant Client 10.2.0.1.0
    Oracle JDBC/OCI Instant Client 10.2.0.1.0
    SSL Required Support Files for InstantClient 10.2.0.1.0
    RDBMS Required Support Files for Instant Client 10.2.0.1.0
    SQL*Plus Files for Instant Client 10.2.0.1.0
    HOME SELECTION
    Central Inventory Location: "C:\Program Files\Oracle\Inventory"
    Oracle Home Status
    OraClient10g_home1 Selected
    PATH = D:\oracle\product\10.2.0\client_1\bin;D:\oracle\product\10.2.0\client_1;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;
    etc, etc, etc
    --------------------------------------------------------------------------------

    thanks
    sqlplus working, had the wrong path, but, not connecting. I did save a copy of the tnsnames.ora from another machine. Here's what it shows, below, I think I need to use the LDAP adapter, but, not sure how to make it use that, sqlnet.ora is:
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    NAMES.DIRECTORY_PATH= (LDAP, TNSNAMES, EZCONNECT)
    ----command line results------
    C:\>tnsping POST_DBSR.xxx.ourcompany.COM
    TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 21-SEP-2
    010 07:33:32
    Copyright (c) 1997, 2005, Oracle. All rights reserved.
    Used parameter files:
    D:\oracle\product\10.2.0\client_2\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
    (HOST = 192.168.1.xxx)(PORT = 1521))) (CONNECT_DATA = (SID = post)))
    TNS-12535: TNS:operation timed out

  • Beginners Assistance with StarOffice and ODBC connections

    Hello,
    I apologize before hand for this VERY newbie question.
    One of the last hurdles to overcome in our company to deploying StarOffice, is the use of MANY refreshable Excel files that pull data from SQL servers. How do I get StarOffice to use these ODBC connections? I have tried creating a new database file, but this does not point me to the correct database on the SQL server. I really could use some help, or handholding, through this process.
    Thank you

    Hi Paul
    I am trying to get the 32 bit drives to work connected to a SQL remote database and I get the following error
    GeneralError:Operation failed.......Index is out of bounds
    I am using a simple script to clone the datasource so a drop down can bring up the other row values
    The lines that it is failing on is
    while (xfa.sourceSet.nodes.item(nIndex).name != "DataConnection2"){ nIndex
    ++; }
    worked fine in Vista, but not windows 7 (using 32 bit drivers)
    Any suggestions?

  • Websphere 6.1 64-Bit (Windows)  and native libraries shipped with CF8

    After more deep tests, i found the following issues:
    - Reporting does not work, because ctr files are crypted (why
    ?) and can't be decrypted (failed to load native library
    nvr_win.dll)
    It is possible to provide an 64-Bit version of nvr_win.dll ?
    Or, simply, how to decrypt ctr files ?
    - CFIMAGE runs slow, because JAI uses Sun's Advanced Imaging
    API. This API uses native DLL's and there is no 64-Bit Windows
    version available. This API may run without the native DLL's, but
    it's really slow (An "ThreadMonitor W WSVR0605W:.." may be
    happend).
    The Server monitor don't fully work (this may be not an
    64-Bit issue):
    Error","WebContainer : 2","09/17/07","15:26:48",,"For input
    string: ""pwa"""
    java.lang.NumberFormatException: For input string: "pwa"
    at
    sun.misc.FloatingDecimal.readJavaFormatString(FloatingDecimal.java:1239)
    at java.lang.Double.parseDouble(Double.java:497)
    at
    coldfusion.monitor.stack.JStackTraceFactory.isJdk15orAboveAvailable(JStackTraceFactory.ja va:65)
    at
    coldfusion.monitor.stack.JStackTraceFactory.providerInstance(JStackTraceFactory.java:31)
    at
    coldfusion.monitor.active.ActiveRequestMonitor.getAllActiveRequests(ActiveRequestMonitor. java:146)
    at
    coldfusion.monitor.MonitoringServiceImpl.getAllActiveRequests(MonitoringServiceImpl.java: 701)
    at sun.reflect.GeneratedMethodAccessor372.invoke(Unknown
    Source)
    at
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:615)
    at coldfusion.runtime.StructBean.invoke(StructBean.java:498)
    at coldfusion.runtime.CfJspPage._invoke(CfJspPage.java:2291)
    at
    cfservermonitoring2ecfc1089727812$funcGETALLACTIVEREQUESTS.runFunction(E:\cf8_final\cfusi on\wwwroot\CFIDE\adminapi\servermonitoring.cfc:809)
    at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:418)
    at
    coldfusion.runtime.UDFMethod$ReturnTypeFilter.invoke(UDFMethod.java:360)
    at
    coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:324)
    at
    coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:56)
    at
    coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:277)
    at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:192)
    at
    coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:448)
    at
    coldfusion.flash.filter.CFCInvokeFilter.invoke(CFCInvokeFilter.java:147)
    at
    coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:279)
    at
    coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40)
    at
    coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27)
    at
    coldfusion.flash.filter.CFCInvokePathFilter.invoke(CFCInvokePathFilter.java:70)
    at
    coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
    at
    coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
    at
    coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
    at
    coldfusion.flash.messaging.ColdFusionAdapter.invoke(ColdFusionAdapter.java:223)
    at
    flex.messaging.services.RemotingService.serviceMessage(RemotingService.java:173)
    at
    flex.messaging.MessageBroker.routeMessageToService(MessageBroker.java:1165)
    at
    flex.messaging.endpoints.AbstractEndpoint.serviceMessage(AbstractEndpoint.java:757)
    at
    flex.messaging.endpoints.amf.MessageBrokerFilter.invoke(MessageBrokerFilter.java:117)
    at
    flex.messaging.endpoints.amf.LegacyFilter.invoke(LegacyFilter.java:158)
    at
    flex.messaging.endpoints.amf.SessionFilter.invoke(SessionFilter.java:48)
    at
    flex.messaging.endpoints.amf.BatchProcessFilter.invoke(BatchProcessFilter.java:67)
    at
    flex.messaging.endpoints.amf.SerializationFilter.invoke(SerializationFilter.java:145)
    at
    flex.messaging.endpoints.AMFEndpoint.service(AMFEndpoint.java:122)
    at
    flex.messaging.MessageBrokerServlet.service(MessageBrokerServlet.java:424)
    at
    coldfusion.flex.ColdFusionMessageBrokerServlet.service(ColdFusionMessageBrokerServlet.jav a:50)
    at
    javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at
    coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
    at
    com.ibm.ws.cache.servlet.ServletWrapper.serviceProxied(ServletWrapper.java:276)
    at
    com.ibm.ws.cache.servlet.CacheHook.handleFragment(CacheHook.java:463)
    at
    com.ibm.ws.cache.servlet.CacheHook.handleServlet(CacheHook.java:281)
    at
    com.ibm.ws.cache.servlet.ServletWrapper.service(ServletWrapper.java:256)
    at
    com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:989)
    at
    com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:930)
    at
    com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
    at
    coldfusion.filter.FlashRequestControlFilter.doFilter(FlashRequestControlFilter.java:71)
    at
    coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
    at
    com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java: 190)
    at
    com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
    at
    com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
    at
    com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:761)
    at
    com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:673)
    at
    com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:498)
    at
    com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:464)
    at
    com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.jav a:90)
    at
    com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:744)
    at
    com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1455)
    at
    com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:113)
    at
    com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink .java:454)
    at
    com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink .java:383)
    at
    com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.jav a:102)
    at
    com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionLi stener.java:165)
    at
    com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
    at
    com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
    at
    com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
    at
    com.ibm.io.async.ResultHandler.complete(ResultHandler.java:195)
    at
    com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:743)
    at
    com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:873)
    at
    com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1469)

    Hi,
    Can OBIEE 11g client be used to connect to OBIEE 10g server suite?
    A. You can, After installation in obiee client and create DSN and you can connect online mode to obiee server suite.
    If you want check serives are running or not use below command.
    ps -ef | grep obiee --- based on your folder name.
    OR,
    ps -ef | grep sawserver.sh -- presentation service
    oradwbi 13041844 1 0 Jul 13 - 0:00 /bin/sh /u02/dwbi_apps/obiee/oraclebi/setup/sawserver.sh
    oradwbi 30408812 34996452 0 15:53:03 pts/2 0:00 grep sawserver.sh
    Ps -ef | grep nqserver.sh
    oradwbi 18022618 1 0 Jul 13 - 30:48 /u02/dwbi_apps/obiee/oraclebi/server/Bin/nqsserver -quiet
    Hope this help's
    Thanks
    Satya

  • Setting up and ODBC connection

    I need to download the Oracle Client in order to setup an odbc connection to an oracle database.
    I am not sure what the right product for me to download is. Can someone help me out?

    What OS are you doing this on? Windows?
    Either way, the instructions are telling you to set an environment variable, but the way you do that differes depending on the OS you are on.
    If you are on Windows, bring up the control panel. Click the "Advanced" tab. Click the "Environment Variables" button.
    Now you see all the environment variables already set for your system. If, in the System Variables section, there is already one called PATH, click on it and then click the "Edit" button. Now add the full path that you installed Instant Client on into that list. If there isn't a PATH variable already defiend, create one with the same wizard I just mentioned.
    Justin is correct. For ODBC, you need the basic Instant Client, and then another download in the same are which is for ODBC. Unzip the contents of both into some other directory and that is the directory to put in the PATH variable.

  • CR 2008 and ODBC connection using Oracle Instant Client driver?

    Two questions.
    I'm creating CR 2008 report using an ODBC connection. The ODBC driver is the Oracle Instant Client (version 10.2, I think.)
    When I define the connection, I see only a few tables. I do not see the Tables, Views, Qualifiers tree that I see with a normal Oracle Server connection.
    Does anybody know why this happens? Is there a CR ODBC driver that works better?
    Second question:  I have a .NET application that is pointing the report to another Oracle DB. In my db, table names are not unique -- each user has the same set of tables. I find that when the .net applciation sets the datasource, I get connected to the first table with a given name; I do not get the table scoped by the logon user.
    In the .net application, how do I scope the table name to a particular user.
    Any info helps. Thanks.
    Tim

    Hi Tim,
    Below are the replies to your questions:
    Answer 1: Please try the below steps:
    - Make sure that in File->Options->Database Tab in the Data Explorer section the corresponding checkboxes are checked for tables, views,system tables,synonyms and stored procedures and the Table name LIKE and Owner LIKE boxes are blank.
    - Please try with OLEDB connection and check the results.
    - You can also refer to this SAP note no# 1215994, the link to which is given below:
    [https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3132313539393426]
    Answer 2: If you are using RAS SDK only then you would be able to change table name. Please let us know if you are using RAS.
       If you are using RAS with Java please post your query in the Java forum else if you are using Visual Studio/.NET then please post your question in .NET Forum.
    Please update with the results.
    Thanks!

  • Migratiing CR XI to 64 bit Windows and RDC ASP

    Which is the best time/cost strategy for the following problem:
    We have developed a WEB application that is running on a WINDOWS Server 2003 (32bit). The aplication was programmed to use de COM+ environment with asp for the Activex viewer.
    We are migrating it to a new machine with WINDOWS SERVER 2003 R2 Standard X64 EDITION.
    On our first try on this machine (we didn´t apply the SP´s), CR developer performed OK, but not the viewer.
    Now we have the SP2, SP3 and SP4, and Crystal Reports 2008.
    Wich is our best strategy? Because we found out that unfortunalty CR 2008 which is 64 bit enabled does not support RDC, and reprogramming the system can be quite time consuming or the Service Packs are oru answers?

    The best and most economic strategy is to install the Service Packs and follow the instruccions found in http://www.microsoft.com/technet/prodtechnol/WindowsServer2003/Library/IIS/848968f3-baa0-46f9-b1e6-ef81dd09b015.mspx?mfr=true
    Deployment Guide  APENDIX D.
    It enables IIS 6.0 to run 32-bit Web applications on 64-bit Windows using the Windows-32-on-Windows-64 (WOW64) compatibility layer.

  • Jabber for Windows and Unity Connection Voice mail out of sync

    Hello all,
    Now that Jabber is pretty much part of every install you begin to notice some trends. One trend that I have noticed happening across several of customers is complaints about Jabber and the Voicemail server getting out of sync. It’s never really been a wide spread issue but it has be noticed by several of my customers enough so that I’m reaching out to see if others are experiencing the same problem. Here are the symptoms, a person sitting at their desk they have a physical phone, and a windows PC running Jabber 4 Windows. They miss a call and the MWI lamp gets lit on the phone but not on Jabber. When you click on HELP / Show Connection status, you see all green checks, and Voicemail shows connected from Jabbers standpoint. When you exit the application and come back in, then it sync’s back up just fine. I have never seen it happen myself, but to be honest I’m never at my desk enough to even notice if my phone lamp is lit.
    Anyway has anyone had similar issues? If so is there a fix?

    Symptom:
    User logged in Jabber and do not log-off/sign-out for more than 24 hours and then jabber does not receive new voicemails from Unity Connection. User will be able to receive voicemails from other interfaces like Outlook, TUI but voicemails will not show up in Jabber.
    Conditions:
    User does not sign out from jabber for more than 24 hours since last log on.
    Workaround:
    Sign out from jabber at-least once a day and sign-in back so that subscription will not expire in Unity Connection database.
    Voicemail does not sync if Jabber left logged in for more than 24 hours
    CSCuo46274
    Can be fixed, depends on releases, TAC offered me a fix in version 10.5(1)ES29

  • When Firefox shows me an update and asks if I'd like to update, I click continue, but it doesn't update. It just goes to a "software update" window and says "connecting to the update server..." and then doesn't do anything else. It never updates. HELP!

    When I sign on to Firefox, a "Software Update" pops up and asks if I'd like to update Firefox. I click Yes/Continue and when I do, the page says "Downloading Firefox" - connecting to the update server... - but it never finishes. It continually shows the blue/white striped line.

    Start at '''http://www.mozilla.com''' and download the latest
    version. At the completion of the download '''don't let the setup
    start Firefox for you''', when the setup ends, start Firefox in your
    normal manner this way you will be less likely to create a new profile.
    The extra startup pages are temporary -- read them. The next time
    Firefox comes up you should be back to starting with your normal home page.
    Note: Firefox must be down once the install starts.
    :Close Firefox with File>Exit. Then make sure Firefox is not running --
    :On Windows: check the "Processes" tab in the Windows Task Manager.
    :On Mac: Firefox > Quit then Command+option+Esc, if Firefox running use Force quit
    '''Permission errors on Mac:'''
    "If you were getting permission errors on a Mac, download the latest
    Firefox version, then uninstall and reinstall Firefox. '''Do not let the uninstall remove remove anything but Firefox itself'''; otherwise, you will lose your profile directories and files as they contain your settings,
    bookmarks, history, extensions, passwords, and cookies.
    If you can't download as mentioned above, find your system and the Firefox version you want in releases, download and start the install as seen above
    * ftp://ftp.mozilla.org/pub/firefox/releases/

  • OCA and ODBC connections

    I am trying to use Oracle Forms 6 to connect to an Access Database and an AS400 system.
    Being some what new to Oracle I have no idea how to overcome this problem, when trying to connect to an ODBC data source through SQL *Plus:
    ORA-00022: invalid session id; access denied
    ORA-00022: invalid session id; access denied
    ORA-00022: invalid session id; access denied
    Error accessing PRODUCT_USER_PROFILE
    Warning: Product user profile information not loaded!
    You may need to run PUPBLD.SQL as SYSTEM
    Server not available or version too low for this feature
    ORA-00022: invalid session id; access denied
    Connected to:
    Oracle Open Client Adapter for ODBC 6.0.5.29.0
    ACCESS 03.50.0000
    Although it does connect via SQL *Plus, connecting with Oracle forms is a different matter! Form Builder brings up possibly the most unhelpful error message I have ever seen, it alerts me the following:  F!G!G or sometimes simply: !G though sometimes it alerts random 'E's and 8's occasionally. Form builder then crashes and will not allow me to even connect to my Oracle Database. I have done everything by the book (oracle white paper oca_info.pdf) so I have no idea why this problem could be occuring.
    Any help you could give me would be gratefully recieved, well to be honest it would be a god send! If I dont overcome this problem I will manually have to transfer thousands of records! Thank you in advance
    Kind Regards
    Richard Clayton

    Hi !
    Do you know where can I find the OCA-6.0.5.35.0 version or higher ?
    I downloaded the Oracle Forms&Reports 6i from Oracle site and even now (January 2003) it still includes in the package the OCA-6.0.5.29.0 which has a bug when accessing ODBC data sources.
    Thanks in advance !

  • Microsoft Rights Management Sharing Application for Windows and the connection with AD RMS

    Hi,
    I have installed AD RMS and now installed on end users Microsoft Rights Management Sharing Application for Windows.
    When I choose protect a document in any end user machine, does it connect with AD RMS server to get a certificate and encrypt the content, or does not use at all AD RMS services? What about when choosing to protect  with an AD RMS template distributed
    to end users?
    Thanks 

    Hi Ardi -
    The first time a user creates or consumes protected content, they must contact the RMS server to "bootstrap".  In this process, the user obtains certificates to identity them within the context of RMS.
    Once a user has bootstrapped, he or she can create protected protected content without access to the RMS server.
    To open protected content, a user must connect to the AD RMS server to obtain a "use license".
    Does that help?
    Micah LaNasa
    Synergy Advisors
    synergyadvisors.biz

  • Windows and MAC connection

    Hi I have just taken on a MAC. I have read lots of discussions about connecting the PC/MAC. No matter what I do the MAC cannot connect to the PC. The PC can connect to the MAC, that is read/write files onto MAC. I have tried all the solutions on the discussion pages, but this particular variation does not appear, I have spent time with Apple help but they just come up with must be PC blocking. When I try to connect to server, message reads, server not avaible or does not exist. So any ideas ? Thanks in advance.

    What version of Windows are you trying to connect to. If it is server 2003 this might be your answer.
    http://guides.macrumors.com/NetworkingWindows_with_Mac_OS_X#Windows_Server_2003Authentication

  • How to fix the windows and nano connection

    I recieved my ipod nano and for 2 glorious days it worked. Then my pc could no longer detect it, it just said "malfunctioned usb device" and didnot appear in itunes. The Nano just has the menu as opposed to the "DO NOT DISCONNECT" screen
    After a long and arduous day i managed to fix the problem.
    By clicking on this link http://docs.info.apple.com/article.html?artnum=93651 it tells you how to fix it.
    i just did this - (with the ipod connected to the pc)
    1) turn hold on, and then off,
    2)then press menu and the center select button simultaiously for 6 seconds
    3)the apple logo appears
    4)then it goes back to the menu briefly, and then goes to the "DO NOT DISCONNECT" screen
    5)open itunes, wait a minute and your nano will appear
    Wahooooo!
    hope this helps everyone!
    Ben

    Weird.
    Yeah, that seems to work.
    I learned this after I railed about how defective the nonos were in the Apple groups.
    Oops.
    This seems to happen when the PC shuts down (as we told it it should re: power options) AND the nano is still plugged in.
    I'm not cool enough to say: "My bad", but it was certainly my error.
    I think that's what happened; I could be wrong

Maybe you are looking for