64 bit windows on Mac Pro

If I use Bootcamp to install a 64 bit version of windows xp pro on a Mac will that allow windows to make full use of the ram installed?
I understand that 32 bit versions of win xp only allow access to 4 gigs or so of ram?
I take it that the processors on a Mac Pro are 64 bit?
Thanks for any advice.

Outside of Windows 64-bit drivers, and the level of support now in the latest BootCamp, I had Vista 64-bit for a few months. Some software is not yet 64-bit so I am holding back for now (Symantec, drivers, even Microsoft OneCare).
You shouldn't have any trouble as far as accessing RAM with XP Pro 64-bit.

Similar Messages

Hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit   I writ again my problem    i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5

On Thu, Jun 14, 2012 at 12:54 PM, mahdi ehsani <[email protected]> wrote:
On Sun, Jun 10, 2012 at 7:29 PM, Apple Support Communities Updates <[email protected]> wrote:
Apple Support Communities
Re: after install windows 7 32 bit there is no sound my mac is os x 10.7.2
created by The hatter in Boot Camp - View the full discussion
This solved my question
This helped me
you have RealTek on your workstation and just download the current driver which is easy to findwww.realtek.com
This solved my question
This helped me
Did this help? Go to the message, sign in, and reply or mark the response as correct or helpful
Start a new discussion in the same community/choose-container!input.jspa?contentType=1&containerType=14&container=2143&ac_ci d=op123456
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
© 2012 Apple Inc. 1 Infinite Loop, MS 303-3DM, Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Apple Support Communities Terms of Use | Apple Support
hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5   Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result
please help us by address site please please .....
<Edited by Host>

hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5 Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result

As soon as video touches my Source or Program windows the Mac Pro (3,1) shuts down

Linc,
You keep showing up when I search for this problem so I hope you can help.
I'm having the same issue in Premiere and Media Encoder (but not After Effects). My Mac just restarts itself as soon as video is loaded. I can start Premiere and open a project and go through relinking media, but as soon as video touches my Source or Program windows the Mac Pro (3,1) shuts down.
I've fixed the problem temporarily two times. The first time I was troubleshooting what was wrong and wound up putting in my old video card and after that fixed the problem, I switched back to my GTX 680. I also did a driver update. After doing that I was ok for a few days so I figured it was a driver thing or maybe the card just needed to be reseated. Then when it started acting up again I figured something was going on.
So I started searching again and came across one of your posts that recommended removing CUDA. I did that and it worked perfectly for a week until about 20 minutes ago. Crashed in the middle of an edit and now each time I restart Premiere it crashes as soon as video touches my monitors.
I found this post because I specifically searched for "com.nvidia.web.NVDAResmanWeb(8.2.7)" from my Problem Report.
Any thoughts?
Thanks,
Darren
Fri Jan 16 14:43:42 2015
panic(cpu 5 caller 0xffffff7f999066a4): NVRM[0/4:0:0]: Read Error 0x00002100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x8a000000 0xffffff827e13b000 0x0e4000a2, D0, P2/4
Backtrace (CPU 5), Frame : Return Address
0xffffff82776cbbe0 : 0xffffff8018c22f79
0xffffff82776cbc60 : 0xffffff7f999066a4
0xffffff82776cbd20 : 0xffffff7f999e0774
0xffffff82776cbd70 : 0xffffff7f99c1605d
0xffffff82776cbdc0 : 0xffffff7f99c4ea83
0xffffff82776cbe20 : 0xffffff7f99a05b8f
0xffffff82776cbe40 : 0xffffff7f9990ca2d
0xffffff82776cbef0 : 0xffffff80190b0a20
0xffffff82776cbf30 : 0xffffff80190af4c2
0xffffff82776cbf80 : 0xffffff80190af597
0xffffff82776cbfb0 : 0xffffff8018cd7607
      Kernel Extensions in backtrace:
         com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f998b1000->0xffffff7f99b5cfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f992bf000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9989b000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f993a3000
            dependency: com.apple.AppleGraphicsDeviceControl(3.6.22)[91D61DEC-2946-3790-8134-B808C016C4 C9]@0xffffff7f998ab000
         com.nvidia.web.NVDAGK100HalWeb(8.2.7)[E7D6DD93-319A-39C6-AE77-19D08D903496]@0xf fffff7f99b6c000->0xffffff7f99d36fff
            dependency: com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f998b1000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f992bf000
BSD process name corresponding to current thread: kernel_task
Boot args: nvda_drv=1
Mac OS version:
13F34
<Re-Titled By Host>

Thanks for the reply. Sorry for the shortened log. Here's the full thing. By the way, where do you learn to read these things? Are there keywords like "error" that you just learn to look for or is it something for in depth?
Thanks,
Darren
Mon Jan 19 08:02:40 2015
panic(cpu 5 caller 0xffffff7f9cd066a4): NVRM[0/4:0:0]: Read Error 0x00504610: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x8a000000 0xffffff82813fc000 0x0e4000a2, D0, P2/4
Backtrace (CPU 5), Frame : Return Address
0xffffff82927dbaa0 : 0xffffff801c022f79
0xffffff82927dbb20 : 0xffffff7f9cd066a4
0xffffff82927dbbe0 : 0xffffff7f9cde0774
0xffffff82927dbc30 : 0xffffff7f9d03e562
0xffffff82927dbc50 : 0xffffff7f9d015a35
0xffffff82927dbd10 : 0xffffff7f9d015e05
0xffffff82927dbd70 : 0xffffff7f9d016096
0xffffff82927dbdc0 : 0xffffff7f9d04ea83
0xffffff82927dbe20 : 0xffffff7f9ce05b8f
0xffffff82927dbe40 : 0xffffff7f9cd0ca2d
0xffffff82927dbef0 : 0xffffff801c4b0a20
0xffffff82927dbf30 : 0xffffff801c4af4c2
0xffffff82927dbf80 : 0xffffff801c4af597
0xffffff82927dbfb0 : 0xffffff801c0d7607
      Kernel Extensions in backtrace:
         com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f9ccb1000->0xffffff7f9cf5cfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9c6bf000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9cc9b000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9c7a3000
            dependency: com.apple.AppleGraphicsDeviceControl(3.6.22)[91D61DEC-2946-3790-8134-B808C016C4 C9]@0xffffff7f9ccab000
         com.nvidia.web.NVDAGK100HalWeb(8.2.7)[E7D6DD93-319A-39C6-AE77-19D08D903496]@0xf fffff7f9cf6c000->0xffffff7f9d136fff
            dependency: com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f9ccb1000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9c6bf000
BSD process name corresponding to current thread: kernel_task
Boot args: nvda_drv=1
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide:     0x000000001be00000
Kernel text base: 0xffffff801c000000
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 234985677156509
last loaded kext at 1019554175070: com.apple.filesystems.smbfs 2.0.3 (addr 0xffffff7f9e577000, size 335872)
last unloaded kext at 421976737662: com.apple.driver.AppleFileSystemDriver 3.0.1 (addr 0xffffff7f9e428000, size 8192)
loaded kexts:
com.nvidia.web.GeForceWeb 8.2.7
com.nvidia.web.NVDAGK100HalWeb 8.2.7
com.nvidia.web.NVDAResmanWeb 8.2.7
com.blackmagic-design.desktopvideo.iokit.driver 10.3.1
com.blackmagic-design.desktopvideo.iokit.framebufferdriver 10.3
com.ATTO.driver.ATTOExpressPCIUl4 4.4.1
com.apple.filesystems.smbfs 2.0.3
com.apple.filesystems.afpfs 11.1
com.apple.nke.asp-tcp 8.0.1
com.apple.filesystems.msdosfs 1.9
com.apple.filesystems.ntfs 3.11
com.apple.iokit.CSRBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleUSBDisplays 360.8.14
com.apple.driver.Oxford_Semi 3.4.1
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.driver.XsanFilter 404
com.apple.driver.AppleIntel8254XEthernet 3.1.4b1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AirPortBrcm43224 700.36.24
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.security.SecureRemotePassword 1.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleUSBHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBAudio 2.9.5f8
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1
com.apple.iokit.IOFireWireSBP2 4.2.6
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.7
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IOAcceleratorFamily 98.23
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleSMC 3.1.8
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOSCSIParallelFamily 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOATAFamily 2.5.2
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
System Profile:
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 3 GHz, 20 GB, SMC 1.25f4
Graphics: NVIDIA GeForce GTX 680, NVIDIA GeForce GTX 680, PCIe, 2048 MB
Memory Module: DIMM Riser B/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser B/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.2.7f3 14616, 3 services, 14 devices, 1 incoming serial ports
Network Service: Ethernet 2, Ethernet, en1
Network Service: Ethernet 1, Ethernet, en0
PCI Card: NVIDIA GeForce GTX 680, Display Controller, Slot-1
PCI Card: NVIDIA GeForce GTX 680, NVDA,Parent, Slot-1
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,0
PCI Card: DeckLink HD Extreme 2, Video, Slot-4
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,1
Serial ATA Device: OWC Mercury EXTREME Pro 6G SSD, 480.1 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
Parallel ATA Device: PIONEER DVD-RW DVR-112D
SCSI Device: SCSI Target Device @ 0
SCSI Device: SCSI Target Device @ 0
USB Device: Hub
USB Device: Keyboard Hub
USB Device: Microsoft Wireless Optical Mouse® 1.00
USB Device: Apple Keyboard
USB Device: USB 2.0 FD
USB Device: Apple Cinema HD Display
USB Device: USB2.0 Hub
USB Device: External
USB Device: NS1068
USB Device: NS1068
USB Device: Hub
USB Device: FCR-HS219/1 Mobile Reader
USB Device: Live! Cam Connect HD VF0750
USB Device: Apple Cinema HD Display
USB Device: Elements 10B8
USB Device: External USB 3.0
USB Device: Bluetooth USB Host Controller
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: unknown_device, OWC Mercury Elite-AL Pro, Up to 400 Mb/sec
Thunderbolt Bus:
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 3 GHz, 20 GB, SMC 1.25f4
Graphics: NVIDIA GeForce GTX 680, NVIDIA GeForce GTX 680, PCIe, 2048 MB
Memory Module: DIMM Riser B/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser B/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.2.7f3 14616, 3 services, 14 devices, 1 incoming serial ports
Network Service: Ethernet 2, Ethernet, en1
Network Service: Ethernet 1, Ethernet, en0
PCI Card: NVIDIA GeForce GTX 680, Display Controller, Slot-1
PCI Card: NVIDIA GeForce GTX 680, NVDA,Parent, Slot-1
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,0
PCI Card: DeckLink HD Extreme 2, Video, Slot-4
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,1
Serial ATA Device: OWC Mercury EXTREME Pro 6G SSD, 480.1 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
Parallel ATA Device: PIONEER DVD-RW DVR-112D
SCSI Device: SCSI Target Device @ 0
SCSI Device: SCSI Target Device @ 0
USB Device: Hub
USB Device: Keyboard Hub
USB Device: Microsoft Wireless Optical Mouse® 1.00
USB Device: Apple Keyboard
USB Device: USB 2.0 FD
USB Device: Apple Cinema HD Display
USB Device: USB2.0 Hub
USB Device: External
USB Device: NS1068
USB Device: NS1068
USB Device: Hub
USB Device: FCR-HS219/1 Mobile Reader
USB Device: Live! Cam Connect HD VF0750
USB Device: Apple Cinema HD Display
USB Device: Elements 10B8
USB Device: External USB 3.0
USB Device: Bluetooth USB Host Controller
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: unknown_device, OWC Mercury Elite-AL Pro, Up to 400 Mb/sec
Thunderbolt Bus:

Windows and Mac Pro w/ Apple RAID card

It happened i have a need to run Windows natively on Mac Pro with Apple RAID card installed.
I know there is no Windows driver for that card, but i had a hope to bypass RAID card via connecting of internal SATA drive directly to iPass(SSF-8087) connector of Mac Pro's motherboard and using of that drive for Windows.
So, i've connected SATA drive this way and it works fine with OS X.
But i can't even try it with Windows because Mac Pro doesn't boot up from Windows installation CD if Apple RAID card installed
Empty black text console is all that i've got after selecting of Windows installation CD in EFI boot menu.
I need a suggestion how to bypass my problem, or generally speaking, how to install Windows onto Mac Pro with Apple RAID card.

I've tried that.
Installation and booting of WinXP passed OK if RAID card removed.
But i've got black screen again trying to boot WinXP after RAID card re-installed.

I need windows on mac pro 13 "

I need runing windows on mac pro 13" I want to buy a need one ..2.4 or 2.8?

Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Benchmarks of all of the above except Crossover can be found in Benchmarking Parallels, Fusion, and VirtualBox Against Boot Camp - The Mac Observer. Boot Camp is only available with Leopard or later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Help Installing Windows 7 64 Bit on Early Mac Pro

As previously noted, Wind 7 RC 64 bit DVD will not boot on early Mac Pro. I installed Win 7 64 bit on a dedicated hard drive as follows: 1) I booted into Vista 64bit successfully 2) I installed Win 7 64 bit on a second black disk, as noted above 3)All files installed correctly I think since Win 7 will begin to boot showing the Windows 7 startup screen 4) However, the startup screen will then disappear and the screen goes black, indicating a failed boot. When I engage the option screen (with primary Mac drive installed) during boot, no Windows disk is shown, indicating that boot camp does not recognize the Win 7 disk as a valid startup drive.
Has anyone successfully installed Win 7 64 bit on an early Mac Pro?? I would appreciate any help in accomplishing this. Also, is there any reason Apple has not provided an EFI firmware update for first generation MacPros?

Burn a DVD with Windows 7 RC 32-bit which you can boot from.
Try Safe Boot also.
From Vista you can install 7 on another hard drive. You can also copy the DVD to 6GB partition and run the install setup off that while in Vista.
Mixing ATI and Nvidia probably still doesn't work (may when 7 ships).
Windows is more aware of disk I/O errors than Mac OS.
Keep your system basic, don't have anything connected or installed you don't need (like PCIe controllers).
Vista SP1 or later, 64-bit also looks for EFI64/UEFI 2.x which causes the "Choose 1 or 2" boot menu and which 2008 Mac Pro (and 2009) work with.
You aren't the first or only person to run into this, and there are people running on 2006 Mac Pro.
http://forums.macrumors.com/forumdisplay.php?f=86
http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0

Windows 7 beta, 64-bit, on a Mac Pro

I'm about to attempt this, so I thought I'd gather together some tips on it. Found this thread re MacBook Pros:
http://ourcoffeestops.com/2009/01/guide-windows-7-x64-build-7000-on-a-macbook-pr o/
Has anybody else tried this on a Mac Pro with any success?
I've got a GEForce 8800 GT, early-2008 Mac Pro with 2 x Quad core. Any advice?
Thanks

If you had installed Vista, they you probably know most all the how and why, and just need tips on what is new and different.
Main new item to be aware of:
Older driver updates and installers (like Apple Boot Camp) have to run in a new "Vista Compatibile Mode" property setting. It may not run, or run and not really be successful.
You will need to reinstall or install RealTek audio driver yourself.
Pull your drives and leave one raw drive in there, formatted as Master Boot Record and FAT (MSDOS) and boot from the Windows 7 DVD you burned earlier in Disk Utility.
If someone has a Mac Pro from pre-2008, it has a different EFI32 firmware, not UEFI 2.x (EFI64) and may see an EFI boot menu when first boot from Windows 7 DVD (or Vista SP1 or later) when using 64-bit (Microsoft added some support for EFI in 64-bit versions post Vista SP1).
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2731677&SiteID=1
http://forums.macrumors.com/archive/index.php/t-467704.html
https://www.microsoft.com/windows/windows-7/beta-installation-instructions.aspx
Message was edited by: The hatter

Windows 7 64 bit on Early Mac Pro

I finally got Win 7 64 bit installed on early Mac Pro. However, I have one significant issue remaining. I have an Apple Cinema 23 connected via ADC to DVI adapter; my video card is a Nvidia Quadro FX 4500. I can boot into Safe Mode without problem since the video card is recognized as a basic VGA monitor. When I boot into "normal" startup, I see the Starting Windows logo but the screen turns black when it boots into the Win 7 OS. The boot up is successfull since I can shut down normally with the keyboard. ( I should mention I have had no problems running Vista 32 bit--no display problems.) In device manager, no problem is shown with the Nvidea driver.
Any suggestions to solve my problem?? Thanks.

Are you able to - and is there a Windows 7 WHQL driver?
I know in the past automatic Windows Update wasn't trusted or the best, though I think with 7RC that is changed, but getting the standalone driver installed would be best bet.
And, you probably want/need to uninstall any driver that was installed, whether by Apple or Microsoft, and use one from Nvidia.
Driver Sweeper 2.0 is also strongly recommended to delete and remove drivers after uninstall, while in Safe Mode on next boot, before installing new drivers - especially if having trouble. Might even want to disconnect from 'net to prevent auto update/install for that.
PS: what keyboard shortcut to shutdown works? I need that one.

Trying to dual boot Windows 7, Mac Pro 3 (2008) doesn't recognize USB boot drive

My system has no optical drive either. I've managed to set up the boot drive in VMWare fusion, and I've confirmed that the boot drive is correctly formatted, because it shows up on my MBP. I've tried blessing this hard drive, I've tried boot camping my way in, but the Mac Pro 2008 model seems adamant about only going via disk. Any super user commands to get my usb thumb drive recognized at option-restart time?

iancray wrote:
UPDATE: Last night, I installed Windows 7 next to Yosemite on my MBP. Copied the Windows partion to my external, and then tried to copy that partition on the external to my MP. No success, probably because MBP and MP have different drivers?
You will need to use Winclone to move images from one Mac to a different Mac if there are any hardware differences. It is a commercial tool.
Please see https://twocanoes.zendesk.com/hc/en-us/articles/202814148-Migrating-a-Boot-Camp- Partition-with-Winclone-4
It requires a Sysprep on the source first to remove any HW-specific parts and make it a proper image to move it to a different HW platform. Once you have this migrated, you will need to reactivate Windows and install the appropriate Windows drivers which will support your MP-specific HW.

Windows on Mac Pro will not shut down

Hi I recently had the MAC Pro the one with 4G RAM, I installed Windows XP on it as well, seems everything is running Ok except that every time when I shut down Windows, it just hang there and I have to press the power button to force it to shut down. Does anyone have any idea why this happen? Anything I need to check? Do I need to reinstall it? Thanks!

Hi, sorry I should have been more specific. The version of the Windows installed is fairly new. If the windows just boot up and then I shut it down, it will shut down right away. But if I run some program like MSN or browse internet for a while then when I try to shut it down, after I click Start->Turn Off computer then I click any of the 3 options (Stand By, Turn off,Restart) it just do not respond, but at the sametime the windows is not frozen, I can still run other program which seems really odd. So I have to manually press the power button to shut it down. I might need to reinstall Windows.

64 bits question for mac pro users

Hi,
I am actually in the process of buying a new Mac Pro and I would like to know if someone here could help me to understand what's going on with the 64 bits mode thing on the mac pro.
I have a mac pro 1,1. Now I am using SL, but ML is out for a while. I use Logic 9 and most of my plugins supports the 64 bits mode, but I am sticked to the 32 bits mode.
First question: Is it right to think that going for 64 bits mode computer now will greatly improve the performances and internal memory management on Logic in 64 bits mode with plugins in 64 bits mode?
Second question: Looking at the wiki page for the mac pro (http://en.wikipedia.org/wiki/Mac_Pro#Specifications), I understand that the 5,1 model is fully 64 bits compatible, but what about the 3,1 and 4,1 models? Are they fully 64 bits compatible if they are upgraded to ML? Why is the kernel not 64 bits?
I would like to buy a used mac pro, which would fit better in my budget right now. But, I am looking for better performances and a 64 bits mode of operation, and these are my priorities right now.
Thanks for your time to help me.
Martin

Yes. And no.
Use all 8 DIMM slots. Result = 17% boost over not.
Use 667MHz 2GB DIMMs = 4% slower (not noticed real world, Barefeats also).
Yes you can't use 8GB DDR3 etc.
I thnk that the issues wtih ML and Lion, the issue witrh some PCIe cards not working, not being bootable, and that it was the first to try to implement the new EFI and SMC in 3 yrs - are bigger issues.
And the cost of system even now is too high without taking into account: RAM, will I need to upgrade the video card it came with? before I can use it.
Yes. Penny wise and pound foolish over 4 yrs old model now (will turn 5 in February) and was first booted by Intel in November 2007.

Hi, I would like to know if is it possible to install windows on mac pro , because I need to have some application like SQL server and visual studio, and they could not be install on mac

hi, I would like to know if is it possible to install windows on macbook pro , because I need to have some application like SQL server and visual studio, and they could not be install on mac

Windows on a Mac

I have windows 7 32-bit in my mac pro but i want to install 64-bit. How can install 64-bit on my existing 32-bit using bootcamp?

I am trying to install windows 7 ultimate 64-bit on my existing windows 7 32-bit. Can someone guide me with step by step process on how to install without losing data from windows?

Unfortunately, you can't. Windows has never, ever been able to install an upgrade, or even the same version over itself without essentially destroying the drive.
Make absolutely sure all of your personal data is backed up, first.
When you install Win 64 from the DVD over an existing installation, it gives you two choices, both of which stink. One simply replaces all of the standard directories with all new data, fully erasing all third party apps you've installed and all of your settings. The second choice isn't any better. It moves all of the standard directories into a folder named Old Data (or something like that). Which again takes all of your third party software with it, along with your personal settings.
No matter which lousy choice you make, you have to reinstall all of your third party apps and set everything up again as if it were a new computer. The only thing that's different from a brand new computer is that your pictures and other such data should still be in your user folder. But everything else will be broken.

Need some urgent help // Streaming windows and Mac Pro

HI ,
I have a nice "issue" here.
At present I am in a project.
We save the video images and sound by capture in FCP PRO with Mac Intel. Ans next to that using a Windows PC to stream live to internet.
We send the video by using a converter from analog to digital using S-video in and out Firewire. (from the converter).
After the converter we send the the firewire signal to a belkin hub to distribute to Mac and PC.
Evenrything goes fine. But the MAc responds to the PC and the Mac to the PC . When the PC blocks (the image for streaming) the Mac stops capturing. When I (the Mac) cancel capturing the PC stops streaming
PLease assist if you can .. how to handle. we guess that the hub creates the issues ...
Should we use a more link switch ? like a network switch ?

Our video runs through a video switcher which then outputs the signal to a PC (live streaming) and into a DRS-11 DV deck for recording as well as converting to FW which goes into the Mac for a live capture (redundancy) as well.
<
Yar, you want deal with the VIDEO, not the data stream, which is what you get on FW.
Use a video/audio distribution amplifier to send duplicate versions of your program video and audio content to two or more different encoding/processing systems.
Your boss/clients are not going to understand the technical requirements if they're Web geeks. Try this: If you want two copies of the same book, you don't use a copier. You buy two copies from the printer. You can't use a copier to distribute copies of a book in real time; each page has to be scanned and copied, one at a time, and they have to be collated separately. Anything that interrupts the process, like pulling out the stacks to staple them into, say, chapters (or insert your own metaphor here), causes the copier to stop since it can no longer knows the collation is correct.
bogiesan

How to install windows in mac pro 13

I need to use microsoft but l need windows to set more easy my docs, please could you help me to find solutions for delate lines and letters back as with windows
l found in mac is not easy to deal with its
thank you

You can use Boot Camp or you can use VMWare/Parallels. You'll have to pay for the latter.
Boot Camp Details

64 bit windows on Mac Pro

Similar Messages

Maybe you are looking for