64 bits client connecting to a 32 bits server
I need to know if connecting a 64 bits client to a 32 bits server is possible and if there is any issue with that ?
There should not be any issue as long as client and server version are compatible.
check metalink
Client / Server / Interoperability Support Between Different Oracle Versions
Doc ID: Note:207303.1
Client/Server interoperability is only limited by the version of them not platform and 32bit/64bit.
Similar Messages
-
Error: OUI.exe Stopped Working 11g R2 32-bit Client on Win 7 64-bit
I am receiving an error "oui.exe stopped working" when running setup.exe to install Oracle 11g R2 (win32_11gR2_client.zip for Win 32-bit) client on Windows 7 Enterprise 64-bit. I never even get as far as the Oracle installation dialog box. I am trying to install 11g R2 32-bit because it is my understanding the 64-bit version of Oracle client is not compatible with Toad for Oracle.
I have read numerous posts on the subject and have tried just about everything I can think of to get around the error. When I run the setup.exe -debug I can see that teh files are unzipped and the installer seems to fail when it hit the section where it tries executing java.exe. Once the dialog box appears with the error message, I am not able to get back to the command window to extract the debug results. I can only see it partially in the background behind the dialog box. When I hit cancel to close the error dialog, the debug window also closes, so no way to get the details of the debug results
I am logged into Win 7 as a member of the Adminstrators group and have verified that the Windows User Access Control (UAC) is turned off. I get the erorr message whether I run as Administrator or not. I have unzipped all the files and folders under the \client directory from the zip file to a folder c:\temp\. So the setup.exe and all folders below it are in the c:\temp directory. I did this because one post suggested an issue with long path names or path names with spaces when executing setup.exe.
Seems like it should not be this difficult. I never had issues in the past installing Oracle client on Windows XP Pro. This is my first attempt at installing under Win 7.
Any help or direction would be much appreciated.
Edited by: user10421280 on Nov 21, 2011 1:27 PMorafad and PavanG,
First let me thank you both for your multiple attempts to help me. I finally figured out what was causing the issue with the Oracle Installer, oui.exe not running properly. Last night I was looking around into the Windows Event Viewer and found an Error entry for oui.exe that pointed to a program directory and .dll in the \\program files\appsense\ directory path. It seems that in addition to the McAfee virus scan, host intrusion, unwanted programs, group policy manager, etc., there is another application installed on the machine that governs what programs can and cannot run. I don't know much about it other than when the program was temporarily suspended, the setup.exe and oui.exe install kicked off fine without the "oui.exe stopped working" error message. It proceeded happily to the Oracle Client installation dialog. All along our IT desktop support was trying to help me with the install and they repeatedly disabled the McAfee programs to no avail, but not the other utilities. It was almost like even they were unaware of this other application running in the background since they never suggested disabling it.
Either way, I'm happy to say that I am now able to successfully launch the Oracle Client installer without issue. I've also learned a little about getting the Oracle 11g Instant client to work with Toad while I worked through the issue with the installer. I could almost get by completely with just using the Instant Client if I didn't have to use SQL*Loader (sqlldr.exe) and tnsping.exe. Any suggestions for getting these two functions to work with the Instant Client would be appreciated. I tried copying the binaries and the message files into the appropriate instant client directories, but windows kept complaining about missing .dll's when I tried executing the commands.
If there is no workaround for getting these functions to work with the Instant Client, and I have to do an Oracle Client install, at least now I can. Do you know if I would need to do the full "Administrator" install to get these functions, or can I do just the "Run Time" install to get sqlldr and tnsping?
Thanks again for your help -
How to get clients connected in WMS on windows server 2008 with c# coding
Sorry to bother anyone about this question.
Can anyone knows how to retrieve amount of client connection to Windows Media Server in real time same as WMS does on server console by c# programming ?
I got logfiles of WMS in system32 directory for details but it must be off-line of all connections which will able to get those informations for doing anything,but in this case I want real time client connection
at online when a client connects to WMS that I will get amout of that client also.
I have tried to search Windows Media Service SDK to develop this on my Windows 7 OS,but I did not find that really.
Can anyone knows this,please ?
Regards,
BigBermHi SYaGCi,
Denis is right this is actually documented in the Supported Platforms Documentation:
"Windows 7 and Windows Server 2008 R2 are new platform support additions in Service Pack 3 which are only available for support on the SP3 full release install of SAP BusinessObjects Enterprise. The SP3 patch only release of SAP BusinessObjects Enterprise does not provide support for these two new platforms."
Kind regards,
John -
10.4.11 Client connection issue to 10.6 server
I am moving from a 10.4 server to a 10.6 server. All the clients are 10.4.
General configuration is as follows:
- Home directories are on the server, shared via AFP.
- Setup a "Guest" computer configuration on the 10.6 server in workgroup manager
- DNS is successful for forward and reverse resolution
- Performed a bind of the client without authentication
- Kerberos is NOT enabled
- Able to authenticate successfully, but get the following message after authentication:
"You are unable to log in to user account "XXXXX" at this time.
Logging in to the account failed because an error occurred. THe home folder for the user account is located on an AFP or SMB server. Contact your system administrator for help."
I am able to successfully access the share using a local account on the client and authenticate against the user on the server.
No errors are showing in the AFP logs. No errors in the Open Directory logs that correspond to this.
Anything that can help for getting the clients connected to the new server (Mac Mini, connected to the network via ethernet)i have the same error with a 10.4 client
"Logging in to the account failed because an error occurred. THe home folder for the user account is located on an AFP or SMB server. Contact your system administrator for help."
anyone has a detailed how to to bind a 10.4 client to a 10.6 server ? 10.7, 10.6.and 10.5 clients working fine but the 10.4 client not :-(
this is for nfs:
asha:/pub /Network/Servers nfs resvport,net 0 0
daishar:/pub /Network/Servers nfs resvport,net 0 0
daishar:/home/rtomayko /Network/Servers nfs resvport,net 0 0
must i only change the "nfs" to "afp" ?
hope anyone can help me thx -
VPN client connect to CISCO 887 VPN Server bat they stop at router!!
Hi
my scenario is as follows
SERVER1 on lan (192.168.5.2/24)
|
|
CISCO-887 (192.168.5.4) with VPN server
|
|
INTERNET
|
|
VPN Cisco client on xp machine
My connection have public ip address assegned by ISP, after ppp login.
I've just configured (with Cisco Configuration Professional) the ADSL connection and VPN Server (Easy VPN).
All the PC on LAN surf internet and remote PC connect to VPN Cisco server via cisco VPN client.
But all remote PC after connection to Cisco VPN server don't ping SERVER1 in lan and therefore don't see SERVER1 and every other resource in LAN.
They can ping only router!!!
They are configured with Cisco VPN client (V5.0.007) with "Enabled Trasparent Tunnelling" and "IPSec over UDP NAT/PAT".
What is wrong in my attached configuration? (I've alspo tried to bind Virtual-Template1 both to unnambered Dialer0 and to Loopback0 but without luck)
Peraps ACL problem?
Building configuration...
Current configuration : 5019 bytes
! Last configuration change at 05:20:37 UTC Tue Apr 24 2012 by adm
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname gate
boot-start-marker
boot-end-marker
no logging buffered
aaa new-model
aaa authentication login default local
aaa authentication login ciscocp_vpn_xauth_ml_1 local
aaa authentication login ciscocp_vpn_xauth_ml_2 local
aaa authorization exec default local
aaa authorization network ciscocp_vpn_group_ml_1 local
aaa authorization network ciscocp_vpn_group_ml_2 local
aaa session-id common
memory-size iomem 10
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-453216506
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-453216506
revocation-check none
rsakeypair TP-self-signed-453216506
crypto pki certificate chain TP-self-signed-453216506
certificate self-signed 01
quit
ip name-server 212.216.112.222
ip cef
no ipv6 cef
password encryption aes
license udi pid CISCO887VA-K9 sn ********
username adm privilege 15 secret 5 *****************
username user1 secret 5 ******************
controller VDSL 0
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group EXTERNALS
key 6 *********\*******
dns 192.168.5.2
wins 192.168.5.2
domain domain.local
pool SDM_POOL_1
save-password
crypto isakmp profile ciscocp-ike-profile-1
match identity group EXTERNALS
client authentication list ciscocp_vpn_xauth_ml_2
isakmp authorization list ciscocp_vpn_group_ml_2
client configuration address respond
virtual-template 1
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA1 esp-3des esp-sha-hmac
crypto ipsec profile CiscoCP_Profile1
set transform-set ESP-3DES-SHA1
set isakmp-profile ciscocp-ike-profile-1
interface Loopback0
ip address 10.10.10.10 255.255.255.0
interface Ethernet0
no ip address
shutdown
interface ATM0
no ip address
no atm ilmi-keepalive
interface ATM0.1 point-to-point
pvc 8/35
encapsulation aal5snap
protocol ppp dialer
dialer pool-member 1
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Virtual-Template1 type tunnel
ip unnumbered Dialer0
tunnel mode ipsec ipv4
tunnel protection ipsec profile CiscoCP_Profile1
interface Vlan1
ip address 192.168.5.4 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip virtual-reassembly in
interface Dialer0
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname ******@*******.****
ppp chap password 0 alicenewag
ppp pap sent-username ******@*******.**** password 0 *********
ip local pool SDM_POOL_1 192.168.5.20 192.168.5.50
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
ip nat inside source list 1 interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 Dialer0
access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark CCP_ACL Category=2
access-list 1 permit 192.168.5.0 0.0.0.255
access-list 100 remark CCP_ACL Category=4
access-list 100 permit ip 192.168.5.0 0.0.0.255 any
dialer-list 1 protocol ip permit
line con 0
line aux 0
line vty 0 4
transport input all
endHello,
Your pool of VPN addresses is overlapping with the interface vlan1.
Since proxy-arp is disabled on that interface, it will never work
2 solutions
1- Pool uses a different network than 192.168.5
2- Enable ip proxy-arp on interface vlan1
Cheers,
Olivier -
VPN client connect to CISCO 887 VPN Server but I can't ping Local LAN
Hi
my scenario is as follows
SERVER1 on lan (192.168.1.4)
|
|
CISCO-887 (192.168.1.254)
|
|
INTERNET
|
|
VPN Cisco client on windows 7 machine
My connection have public ip address assegned by ISP, after ppp login.
I've just configured (with Cisco Configuration Professional) the ADSL connection and VPN Server (Easy VPN).
All the PC on LAN surf internet and remote PC connect to VPN Cisco server via cisco VPN client.
But all remote PC after connection to Cisco VPN server don't ping SERVER1 in lan and therefore don't see SERVER1 and every other resource in LAN. I can't even ping the gateway 192.168.1.254
I'm using Cisco VPN client (V5.0.07) with "IPSec over UDP NAT/PAT".
What is wrong in my attached configuration? (I've alspo tried to bind Virtual-Template1 both to unnambered Dialer0 and to Loopback0 but without luck)
Perhaps ACL problem?
Building configuration...
Current configuration : 4921 bytes
! Last configuration change at 14:33:06 UTC Sun Jan 26 2014 by NetasTest
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname TestLab
boot-start-marker
boot-end-marker
enable secret 4 5ioUNqNjoCPaFZIVNAyYuHFA2e9v8Ivuc7a7UlyQ3Zw
aaa new-model
aaa authentication login default local
aaa authentication login ciscocp_vpn_xauth_ml_1 local
aaa authentication login ciscocp_vpn_xauth_ml_2 local
aaa authorization exec default local
aaa authorization network ciscocp_vpn_group_ml_1 local
aaa authorization network ciscocp_vpn_group_ml_2 local
aaa session-id common
memory-size iomem 10
crypto pki trustpoint TP-self-signed-3013130599
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3013130599
revocation-check none
rsakeypair TP-self-signed-3013130599
crypto pki certificate chain TP-self-signed-3013130599
certificate self-signed 01
3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 33303133 31333035 3939301E 170D3134 30313236 31333333
35305A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 30313331
33303539 3930819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100A873 940DE7B9 112D7C1E CEF53553 ED09B479 24721449 DBD6F559 1B9702B7
9087E94B 50CBB29F 6FE9C3EC A244357F 287E932F 4AB30518 08C2EAC1 1DF0C521
8D0931F7 6E7F7511 7A66FBF1 A355BB2A 26DAD318 5A5A7B0D A261EE22 1FB70FD1
C20F1073 BF055A86 D621F905 E96BD966 A4E87C95 8222F1EE C3627B9A B5963DCE
AE7F0203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603
551D2304 18301680 14E37481 4AAFF252 197AC35C A6C1E8E1 E9DF5B35 27301D06
03551D0E 04160414 E374814A AFF25219 7AC35CA6 C1E8E1E9 DF5B3527 300D0609
2A864886 F70D0101 05050003 81810082 FEE61317 43C08637 F840D6F8 E8FA11D5
AA5E49D4 BA720ECB 534D1D6B 1A912547 59FED1B1 2B68296C A28F1CD7 FB697048
B7BF52B8 08827BC6 20B7EA59 E029D785 2E9E11DB 8EAF8FB4 D821C7F5 1AB39B0D
B599ECC1 F38B733A 5E46FFA8 F0920CD8 DBD0984F 2A05B7A0 478A1FC5 952B0DCC
CBB28E7A E91A090D 53DAD1A0 3F66A3
quit
no ip domain lookup
ip cef
no ipv6 cef
license udi pid CISCO887VA-K9 sn ***********
username ******* secret 4 5ioUNqNjoCPaFZIVNAyYuHFA2e9v8Ivuc7a7UlyQ3Zw
username ******* secret 4 Qf/16YMe96arcCpYI46YRa.3.7HcUGTBeJB3ZyRxMtE
controller VDSL 0
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group EXTERNALS
key NetasTest
dns 8.8.4.4
pool VPN-Pool
acl 120
crypto isakmp profile ciscocp-ike-profile-1
match identity group EXTERNALS
client authentication list ciscocp_vpn_xauth_ml_2
isakmp authorization list ciscocp_vpn_group_ml_2
client configuration address respond
virtual-template 1
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
mode tunnel
crypto ipsec transform-set ESP-3DES-SHA1 esp-3des esp-sha-hmac
mode tunnel
crypto ipsec profile CiscoCP_Profile1
set transform-set ESP-3DES-SHA1
set isakmp-profile ciscocp-ike-profile-1
interface Ethernet0
no ip address
shutdown
interface ATM0
no ip address
no atm ilmi-keepalive
hold-queue 224 in
pvc 8/35
pppoe-client dial-pool-number 1
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Virtual-Template1 type tunnel
ip address 192.168.2.1 255.255.255.0
tunnel mode ipsec ipv4
tunnel protection ipsec profile CiscoCP_Profile1
interface Vlan1
ip address 192.168.1.254 255.255.255.0
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1452
interface Dialer0
ip address negotiated
ip mtu 1452
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname ****
ppp chap password 0 *********
ppp pap sent-username ****** password 0 *******
no cdp enable
ip local pool VPN-Pool 192.168.2.210 192.168.2.215
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
ip nat inside source list 100 interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 Dialer0
access-list 100 remark
access-list 100 deny ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
access-list 100 remark
access-list 100 permit ip 192.168.1.0 0.0.0.255 any
access-list 120 remark
access-list 120 permit ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
line con 0
exec-timeout 5 30
password ******
no modem enable
line aux 0
line vty 0 4
password ******
transport input all
end
Best Regards,I've updated ios to c870-advipservicesk9-mz.124-24.T8.bin and tried to ping from rv320 to 871 and vice versa. Ping stil not working.
router#sh crypto session detail
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, T - cTCP encapsulation
X - IKE Extended Authentication, F - IKE Fragmentation
Interface: Dialer0
Uptime: 00:40:37
Session status: UP-ACTIVE
Peer: 93.190.178.205 port 500 fvrf: (none) ivrf: (none)
Phase1_id: 192.168.1.100
Desc: (none)
IKE SA: local 93.190.177.103/500 remote 93.190.178.205/500 Active
Capabilities:(none) connid:2001 lifetime:07:19:22
IPSEC FLOW: permit ip 10.1.1.0/255.255.255.0 10.1.2.0/255.255.255.0
Active SAs: 4, origin: dynamic crypto map
Inbound: #pkts dec'ed 0 drop 30 life (KB/Sec) 4500544/1162
Outbound: #pkts enc'ed 5 drop 0 life (KB/Sec) 4500549/1162 -
SQL*PLUS 32 Bit Client needed for Windows 64 Bit
Hi,
I have got a 64 Bit Windows OS and an Oracle 11.
With 32 Bit Applications ( Crystal Reports) I can not run SQL NET Thick, SQL NET Thin and JDBC.
Oracle 32 Bit Installation is Missing.
Oracles "Instant Client Downloads for Microsoft Windows (32-bit)" will not do it.
http://www.oracle.com/technetwork/topics/winsoft-085727.html
What else to use ?
Thank You
Martin SautterMartin.Sautter wrote:
Hi,
i used:
instantclient-basic-nt-11.2.0.2.0.zip (32BitClient)
instantclient-sqlplus-nt-11.2.0.2.0.zip.
I did not find an "old", "classic" SQL*PLUs client.What does that mean exactly, classic client?
Did you unzip the ic sqlplus .zip (the one listed) in the same dir as ic basic?
After dezipping waht than ?
No installer, nothing ...That's the beauty of Instant Client, just unzip or move a few files, set PATH if needed, and you have client libraries all "installed" and ready.
>
You can give advice ?Generally, required lib files are (n Windows) oci.dll, oraociicusN.dll or oraocieiN.dll (N= e.g. 11). Then for Sql*plus add orasqlplusicN.dll and the .exe from ic-sqlplus package.
C:\Users\Test\Ora-IClite>dir
Volume in drive C is OS
Volume Serial Number is 6E8F-186A
Directory of C:\Users\Test\Ora-IClite
2011-12-16 09:30 <DIR> .
2011-12-16 09:30 <DIR> ..
2011-08-31 11:39 38 ldap.ora
2011-07-30 12:21 683 008 oci.dll
2011-07-30 12:21 44 153 856 oraociicus11.dll
2011-07-30 12:21 1 501 696 Orasqlplusic11.dll
2011-07-30 12:21 869 376 sqlplus.exe
C:\Users\Test\Ora-IClite>.\sqlplus user@'localhost/xe'
SQL*Plus: Release 11.2.0.2.0 Production on Fri Dec 16 09:34:13 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter password:Edited by: orafad on Dec 16, 2011 9:35 AM -
Installation of Oracle 11g 32 bit Client on Windows 7 (32 bit) laptop.
Hi,
I just got a new Laptop with Windows 7 (32 bit) operating system.
Has any one successfully installed Oracle 11g client on in Windows 7 environment and if so what are the steps involved.
In the past I have never had any trouble installing an Oracle client on a Windows work station.
Thanks,
Ashim.Oracle hasn't officially supported 11g on windows 7. folks have installed it successfully too. Check the below threads.
Re: 11g R1 database installation is successful on windows 7 64-bit
Oracle 11g on Windows 7
Re: DB 11gR2 for Windows ??
HTH
-Anantha -
Lync 2010 client connecting to 2013 persistent chat server
Since we never had Group Chat in our 2010 environment, I have no idea how it works and now that we have 2013 Persistent Chat, I am struggling with getting the Lync 2010 connected. The 2013 client works just fine as it is integrated into the client. I found
out Lync 2010 needs a separate Chat client to run along side the IM client.
I installed this client but from there I have no idea how to connect it to the 2013 Chat server. I created the endpoint on the Lync 2013 server according to the article
http://technet.microsoft.com/en-us/library/jj204901.aspx but something else needs to be done. I just don't know what. Not even sure where to start looking. Many of our Lync clients have
to use 2010 because the OS is XP so I need to find out how to get these users to work with Persistent Chat.
I am not sure what the point is of creating the End point according to the article. I am sure its necessary but not sure how it fits into the clients using it to connect. What does the article mean when it says "Next, configure Persistent Chat clients
to use that SIP address as their contact object". Do you need Group Chat functioning in 2010 for this to even work?
The problem is we never had Group Chat with 2010 so I am sure there are some settings missing like DNS records etc...If you have users running legacy clients (such as Microsoft Lync 2010 these users might find the default Persistent Chat URIs difficult to work with and difficult to use when pointing their legacy client towards the pool. Because of this,
administrators need to use the New-CsPersistentChatEndpoint cmdlet to create an additional contact object for the pool, a contact object that provides a friendlier, easier-to-use URI.
Lisa Zheng
TechNet Community Support -
Locked folders for 10.4.7 clients connecting to 10.3.9 server
I'm not sure if this is a 10.4.7 client issue, or a 10.3.9 server issue.
I recently upgraded several clients to 10.4.7. They connect to my server which is 10.3.9. When connecting via AFP from my 10.4.7 clients, several folders would display the "Lock" on the folder icon and I would not have permissions to add a new file to that folder. If I connected from a 10.4.5 or earlier client (I did not have any 10.4.6 clients), the folder would not appear to be locked and I would be able to create a new file in that folder. SMB connection works fine from 10.4.7 client. The folder did not appear to be locked from the 10.3.9 server when I logged on locally to the server.
The only way to resolve this was to connect remotely to the server from my 10.4.7 client and remove the check next to Locked in the GetInfo window of each folder that was affected, as long as I was the owner of the folder.
Any thoughts on way this may have occurred? I'm looking for a more global fix.Having the same issue here.
Working on a 10.3.9 fileserver, the 10.4.5 clients have no problems. The problem occured when updating to 10.4.6.
It has something to do with newer AppleShare components in 10.4.6.
Now we're using a work-around on the updated machines, it's described here as a solution for PhotoShop-problems, but it worked for our problem too.
http://www.adobe.com/support/techdocs/333037.html
On our 10.4.5 machines we're still waiting with updating untill this issue is solved. (If it ever will be). Else i think we'll need to upgrade our server.
G5 Mac OS X (10.4.6) -
I have install AD and DNS, No DHCP on windows server 2008 r2. which has two NIC external and internal.
Domain: mhpd.com
Computer name: win2k8
External
ip: 172.16.31.32/16
gw:172.16.0.1
dns:8.8.8.8
4.2.2.2
Internal:
ip: 172.16.31.31/16
gw: blank
dns:127.0.0.1
IN DNS i have set forwarders 8.8.8.8 and 4.2.2.2 which is succeefully resolved. root hints is ok
Clients configuration(client did not add in ad)
ip:172.16.2.241/16
gw:172.16.31.32
dns:172.16.31.32
Question: I am able to access internet on domain controller cum server 2008. But on client computer display yellow symbol on lan icon and no internet access ping win2k8 successful.
ping win2k8.mhpd.com successful. ping 8.8.8.8 or ping google.com request time out.
what is problem in my configuration?Hi haresh,
First, the network is overlapped on your computer.
Second, AD DS is not recommended to be installed on a multihomed computer.
Both of these will cause conmunication issues.
You may need to re-plan your network.
Best Regards.
Steven Lee
TechNet Community Support -
Installing 64 bit client on Windows Server 2008
Hi,
I'm trying to install an 11.2.0.2 64 bit client on my windows 2008 R2 server and its not going through. The install wizard completes, but when I click "install" it starts up the install and just closes in about 3 seconds installing nothing in the install directory.
We currently have a 32 bit 11.2.0.2 client installed on the server as well.
How can I get the 64 bit client to install properly?
I've tried running the setup.exe as admin, running it through cmd with ignore system prereqs, and giving the install folder full permissions to everyone
Edited by: 893188 on Oct 25, 2011 12:41 PMPl confirm that you are installing using two separate ORACLE_BASE directories - one for 32-bit and the other for 64-bit.
http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm#CJADGJDB
Are there any clues in the install log ? http://download.oracle.com/docs/cd/E11882_01/install.112/e16774/ts.htm
HTH
Srini -
Connect from VBA 64 bit to Oracle from windows 7 64bit
Hi,
We are trying to connect from Autocad VBA 64 bit to Oracle 10g server from windows 7 64bit OS.
Toad can connect to Oracle without any issue.
I installed 10g 32 bit client and 11g 64 bit client.
Please help me in installing and configuring any 64 bit provider to connect from vba. I tried ODAC but not any success until now.
Regards,
ShijithHi Jenny,
Thanks for replaying in quick time.
I had solved my issue by installing the following.
1) Oracle forms 6i
2) Oracle 11g 32 bit client
3) Oracle 11g 64 bit client
4) ODAC 11g 32 bit
5) ODAC 11g 64 bit
And able to get a sucessful connection with the following connection string.
Provider=OraOLEDB.Oracle;Password=dddd;Persist Security Info=True;User ID=dddd;Data Source=ddddd
Is there is any better way to do it? It is realy pitty that we have to install more than 2GB of client coponents to get a oracle connection from client side.
Please suggest a best practice.
Regards
shijith -
Cannot Install 11g 64 bit client on Windows 7 Professional 64 bit OS
I am trying to install Oracle 11g 64 bit client on Windows 7 64 Bit Professional. I'm running setup as administrator and all prerequisites fail with Actual Value not Found Expected value not found. I select ignore and press next and the application just silently shuts down. Log is too big so here is an abbreviated log.
Here is the installation log
Thanks in advance!
Using paramFile: C:\temp\win64_11gR2_client\client\install\oraparam.ini
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
INFO: Initial values of Setup Properties :
PROPERTY VALUE
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
DECLINE_SECURITY_UPDATES false
FROM_LOCATION C:\temp\win64_11gR2_client\client\install\../stage/produc
ts.xml
INSTALL_TYPE InstantClient
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE
ORACLE_HOME
ORACLE_HOSTNAME xxx-xxxxxxx-xxx.xxx.xxxxxxx.xxx
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en"}
oracle_install_LaunchNetCA false
oracle_install_NoMigration true
oracle_install_RACInstall false
oracle_install_WindowsSystemDirectory
oracle_install_client_OraMTSPortNumber 2030
oracle_install_db_ConfigurationType
oracle_install_db_InstallEdition EE
oracle_install_db_InstallType
INFO: Launching Oracle Client Installer
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state init
INFO: Waiting for completion all forked tasks at state init
INFO: All forked task are completed at state init
INFO: Completed background operations
INFO: Executing action at state init
INFO: Completed executing action at state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <init>
INFO: Completed validating view at state <init>
INFO: Validating state <init>
WARNING: Validation disabled for the state init
INFO: Completed validating state <init>
INFO: Verifying route success
INFO: Get view named [InstallTypesUI]
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: View for [InstallTypesUI] is oracle.install.ivw.client.view.InstallTypesGUI@94b318
INFO: Initializing view <InstallTypesUI> at state <clientInstallType>
INFO: InstallTypesPane installType is: InstantClient
INFO: Completed initializing view <InstallTypesUI> at state <clientInstallType>
INFO: Displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Completed displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Loading view <InstallTypesUI> at state <clientInstallType>
INFO: Completed loading view <InstallTypesUI> at state <clientInstallType>
INFO: Localizing view <InstallTypesUI> at state <clientInstallType>
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: Completed localizing view <InstallTypesUI> at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientInstallType
INFO: Completed executing action at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Client Install Type set in InstallTypeUI is : Administrator
INFO: Validating view at state <clientInstallType>
INFO: Completed validating view at state <clientInstallType>
INFO: Validating state <clientInstallType>
WARNING: Validation disabled for the state clientInstallType
INFO: Completed validating state <clientInstallType>
INFO: In Transition of InstallTypesAction:
INFO: Verifying route ic_no
INFO: Get view named [ProductLanguageUI]
INFO: View for [ProductLanguageUI] is oracle.install.ivw.common.view.ProductLanguageGUI@74d175ff
INFO: Initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Fetching Available Languages...
INFO: Completed displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Loading view <ProductLanguageUI> at state <productLanguage>
INFO: Completed loading view <ProductLanguageUI> at state <productLanguage>
INFO: Localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state productLanguage
INFO: Waiting for completion all forked tasks at state productLanguage
INFO: All forked task are completed at state productLanguage
INFO: Completed background operations
INFO: Executing action at state productLanguage
INFO: Completed executing action at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: The languages in which the product will be installed are [en]
INFO: Validating view at state <productLanguage>
INFO: Completed validating view at state <productLanguage>
INFO: Validating state <productLanguage>
INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
INFO: Completed validating state <productLanguage>
INFO: Verifying route productlanguage_yes
INFO: Get view named [InstallLocationUI]
WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@3850620f
INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Loading view <InstallLocationUI> at state <getOracleHome>
INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOracleHome>
INFO: Completed validating view at state <getOracleHome>
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Administrator.xml
INFO: refDataFile: C:\temp\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from C:\temp\win64_11gR2_client\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/C:/temp/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/C:/temp/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: PATH has :==>C:\Users\xxxxxxxx\AppData\Local\Temp\OraInstall2012-04-17_11-11-24AM\jdk\jre\bin;.;C:\windows\system32;C:\windows;C:\app\xxxxxxxx\Oracle\product\11.2.0\client_win32\bin;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Common Files\Roxio Shared\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\OEM\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\OEM\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\OEM\12.0\DLLShared\;C:\Program Files (x86)\Roxio\OEM\AudioCore\;C:\Program Files\TortoiseSVN\bin;C:\Program Files (x86)\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;c:\Program Files\Microsoft SQL Server\90\DTS\Binn\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_NO
INFO: Verifying route INVENTORY_NO
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prereqExecutionDecider>
INFO: Completed validating view at state <prereqExecutionDecider>
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Get view named [PrereqUI]
INFO: View for [PrereqUI] is oracle.install.commons.base.interview.common.view.PrereqGUI@64d90254
INFO: Initializing view <PrereqUI> at state <checkPrereqs>
INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
INFO: Displaying view <PrereqUI> at state <checkPrereqs>
INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
INFO: Loading view <PrereqUI> at state <checkPrereqs>
INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
INFO: Localizing view <PrereqUI> at state <checkPrereqs>
INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Administrator.xml
INFO: refDataFile: C:\temp\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: xxx-xxxxxxx-xxx:C:\Users\xxxxxxxx\AppData\Local\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Preparation of nodes for running verifications failed. Reason:
- Cause Of Problem Not Available
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: *********************************************
INFO: Free Space: xxx-xxxxxxx-xxx:C:\Users\xxxxxxxx\AppData\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: Error Message:PRVF-4001 : Check: Space available on "C:\Users\xxxxxxxx\AppData\Local\Temp"
INFO: Cause: Could not determine mount point for location specified.
INFO: Action: Ensure location specified is available.
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <checkPrereqs>
INFO: Completed validating view at state <checkPrereqs>
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Completed validating state <checkPrereqs>
INFO: Verifying route success
INFO: Get view named [SummaryUI]I disagree with your assessment, for two reasons.
One is the severity for RAM is listed as Severity:IGNORABLE.
Secondly I just saw this happen to myself just a moment ago (which is how I found this threat) as well using a silent install on a Windows 2008r2 server I can install to using the setup.exe manually. so disk and memory really isn't an issue.
I suspect something else is going on here. If you read those warnings the Critical they are just the last two about disk space and the PATH variable. Perhaps I am not running as elevated as I thought or the C$ share is not reach able. I am going to keep trying and will report back here when I get my silent install working.
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: Error Message:PRVF-4001 : Check: Space available on "C:\Users\xxxxxxxx\AppData\Local\Temp"
INFO: Cause: Could not determine mount point for location specified.
INFO: Action: Ensure location specified is available.
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO:
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -
How to get 64-bit install and 32-bit client to work on 1 pc
I have installed a full 64-bit 11g R2 install on my Windows 7 D: drive, installed two DB's, worked great. Then I realized application I need to support requires 32-bit client (for drivers) so I installed the 11g client also.
My problem is that my registry only shows one ORACLE_HOME--the 64-bit full install whereas Cognos reqs to point to 32-bit client.
Sqlplus in 64-bit works fine (D:\oracle\app\dock\product\11.2.0\dbhome_1\BIN\sqlplus.exe) whereas the 32-bit client sqlplus (D:\oracle\client\app\dock\product\11.2.0\client_1\BIN\sqlplus.exe) does not work. The error is:
ORA-12560: TNS:protocol adapter error
If I open cmd prompt and navigate to 32-bit sqlplus under client this WILL work to login (but then I noticed it was using the 64-bit ORACLE_HOME and PATH settings if I typed set). In order to fix Cognos, I changed my ORACLE_HOME and path to point to the 32-bit client (i.e. from D:\oracle\app\dock\product\11.2.0\dbhome_1 to
ORACLE_HOME = D:\oracle\client\app\dock\product\11.2.0\client_1
PATH = D:\oracle\client\app\dock\product\11.2.0\client_1\bin;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files\ThinkPad\Bluetooth Software\;C:\Program Files\ThinkPad\Bluetooth Software\syswow64;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\Common Files\Intel\WirelessCommon\
Guess what? This stopped both the 64-bit and 32-bit sqlplus from working, even after bouncing the computer. Now the listener (64-bit) OracleOraDb11g_home1TNSListener will also not start either.
Sooooo, I think I need to set the OH and PATH back to the 64-bit as that is what the Listener requires but any ideas how to get the 32-bit sqlplus to also work?!?
Thanks in advance for any help!lo**** wrote:
My problem is that my registry only shows one ORACLE_HOME--the 64-bit full install whereas Cognos reqs to point to 32-bit client. The env/reg variables probably do exist/show, only in the right place. In Win 64-bit, there's a separate branch of reg entries for 32-bit (look for WoW6432Node).
>
... whereas the 32-bit client sqlplus (D:\oracle\client\app\dock\product\11.2.0\client_1\BIN\sqlplus.exe) does not work. The error is:
ORA-12560: TNS:protocol adapter errorIt works as expected. Since there is no Oracle instance in the Client home (no surprise), you can't connect "locally" from the 32-bit sqlplus. I.e. you need to use "...@connectident" in the connect string.
In order to fix Cognos, I changed my ORACLE_HOME and path to point to the 32-bit client (i.e. from D:\oracle\app\dock\product\11.2.0\dbhome_1 toOn Windows platform, ORACLE_HOME should not be set by user (it is already set by installer, in the Registry).
To pick up proper settings, PATH need to be set or used.
>
Sooooo, I think I need to set the OH and PATH back to the 64-bit as that is what the Listener requires but any ideas how to get the 32-bit sqlplus to also work?!?Please remove OH from env system settings.
Multiple homes on Windows is often a source of problems, since extra consideration and setup is needed more than just installing the software.
If "Cognos" relies on system PATH, then one way to go might be:
- put path to 32-bit Client bin folder first in PATH
- set up a shortcut to command window with only 64-bit in PATH, for times when you need to administer the database via command line.
Maybe you are looking for
-
How to get rid of '+' sign in front of ASM in OEM
I have the target name like '+ASM1_cad2updb001' in the OEM. For our program to work, I need to get rid of the plus sign at the begining. Can you tell me how to achieve this? Thanks! Edited by: user12238208 on Nov 30, 2009 1:31 PM
-
Can 1.1 on Win2000 Server handler DTD that are external to the xml document? I know it handles local DTDs. Here is the decl: <!DOCTYPE TRANSCRIPT SYSTEM "\\dga22\DTDs\transcript.dtd"> Here is the error. Thu Mar 08 15:51:40 CST 2001: \Transcription\In
-
Finging out number of sessions an application acutally needs
Hi Setup 4 : node rac cluster.(11gr2) App team claims they need 400 sessions (using connections pools) to the database) which they are currenlty using. How do I find out how many connections they actualy need/use at their peek bases on their service
-
Cannot type Traditional Chinese
I am using the newest version of Firefox for android. I cannot type the Traditional Chinese correctly in any banks in the browser. it is quite inconvenient when using the Google search engine for searching Chinese keywords. My device is Sony Xperia Z
-
L2TP based VPN with OpenS/WAN server, OpenSSL machine certificates
I cannot seem to get OSX to accept the machine certificates for a VPN connection using Internet Connect. I have generated OpenSSL x509 certificates for the server and client side, the same process has generated certificates that work just dandy with