640x480 and above, capture with MSI GF4 Ti4200 VTP

could anyone successfully perform this operation ?
The weird thing is that if I set a capture of something like 5 fps in VirtualDub and 640x480 (I tried with several codecs and thought that decreasing the fps would improve the bandwidth usage), it still doesn't want to capture anything -> 0 frames. The maximum I can get (15% frames lost) is 320x200 at 30 fps. I tried to capture directly to memory as it's supposed to be very fast, no luck.
Maybe my system is not monster enough, don't know.... ?( Or could that be the card which is limited for this ?
MSI GF4 Ti4200 VTP - 1 gig RAM (DDR 333), Athlon XP 2100, IBM ICL35 120 GB - OS : W2K.
WDM 1.16 from MSI-CD. I tried with WDM 1.08 too.

your system is fine for this kind of job....
i have no problem in capturing full pal (768x...) in 30 fps (using included wincoder and mpeg1 or mpeg2 codecs) 60% cpu load on duron @1380
virtual bud will need somethong better then 1,3gh duron but i got no problems with 640x480 divx pro 5.02 25fps on my current sysetm (but the cpu load is high 75-90%) (0% frame lost)
some motion codecs (mjpg) will need both fast cpu and fast hdd....
uncompresed will produce so much data that even very fast hdd's will by to slow
but it is in fact weird 15% frame lost on 320x200 is much to high.. what board are u using?? are the latest 4in1 drivers instaled (very important for w2k) by shure that agpx4 and bus mastering are on... are u using any other extensin cards (tv tuner, off board sound, ide, lan??) if yes try removing them

Similar Messages

Does exist the MSI GF4 TI4200 VTP8X?

Hello, I live in Spain and I go to adquire a MSI graphics card. I'll buy a GF4 TI4200 VTP 8X, but I think that model doesn't exist because in the oficcial page not appear, only appears the TD 8X and the VTD 8X models. But in http://www.alternate.net that model exist! What happen? Exist or not exist?
Thank you very much !!!
P.D. Sorry for my English, it isn't very well

I had the same problem with my MSI G4 Ti4200-VTD8X.
I did the same manual loading of the capture program. Didn't work. Look in control panel under your hardware and see if there is a yellow "!" next to the part that mentions "capture." Every time that was there the in didn't work.
I would uninstall and try it again.
Sometimes it would work for the day. I would even shut the computer off and when I would turn it back on, it would still work. Shut it off for the night and the next day it wouldn't work again! Go figure!!! Do a restore to the point where I shut the computer off for the night, and it still wouldn't work.
I believe it worked for good when I loaded the 4072 drivers. I did not install the manual program (I think - I did so many un/installs I can't be sure). Now the funny thing, those other little installs are not in my harware. But it works. I can't explain this.
Basically, uninstall the whole card driver , not just the capture. Reinstall the card driver without that other manual capture program. Just keep trying installing and uninstalling and checking out WinProducer to see if the capture option is there. If it still doesn't, try the manual capture program. Just keep trying different combinations.
Sorry that this isn't more of a step by step, but it worked for me. Hopefully MSI will put out another driver soon that will fix this once and for all.
Tom

Msi gf4 ti4200 td64

For starter, sorry about my bad English !
Sys Specs:
Amd Athlon 900 (o/c 945)
320 MB ram
MSI K7T Turbo 2
MSI gf4 ti4200 td64 64mb
Last week I bought my video card. I didn't have problems until few days ago. Mouse movement in Win XP is choppy, not all the time. I played with sample rate but that didn't help.I tried my old gf2 mx400, and i didn"t have problems. I was reading threads and I realized that the problem may be in power supply. It's a bit old (about 2 years :-) ), iam not sure is it good if it is warm . This problem occurd just after the problem with HD (detection problems, messed HD name..), i checked IDE cable, it's good. 3d expirience is not shownig voltages and temepatures. Fuzzy logic 3 somtimes alerts that the temperature in chassis is 131C!! which is impossible. I sens lack of fps in games.
Please help!

Leadman Electronics Model LP-6100
+3.3V +5V +12V -5V
235W 10A 20A 10A 0.1A
*250W 10A 25A 10A 0.1A
300W 10A 30A 12A 0.1A
400W 10A 40A 16A 0.1A

MSI GF4 Ti4200 VTD8X tech question

Hi everyone, I hope u can help me with this:
I'm planning on buying a MSI GF4 Ti4200 VTD8X (Video In) from the United States which uses the NTSC system for Video, however where I live we use the PAL system for Video. So my question is will I be able to use the Video In feature of the card ?( ?? Do these cards work using both video systems or are there different video versions of the card?
Thanks in advance!

bondock,
It is my understanding that they will work with both systems. They do not make them market specific.
Take Care,
Richard

Are the newer ipod classics (80GB and above) compatible with docks for the older ipod classics (20GB)?)

are the newer ipod classics (80GB and above) compatible with docks for the older ipod classics (20GB)?)

I have an iPod Touch 2 with iOS 4.2.1. This is the highest version that works on this device. I checked it once and it had to do with iOS 4.3 and above only supporting the higher RAM CPUs on newer devices.
Apple does make it harder than it needs to be. There still remain a number of apps available on iTunes that will work but they are hard to find because you must manually look at each app specs to see if the app supports an iOS below 4.3
App backups are your friend since iTunes has no way to keep older version of apps.

I have a small problem with MSI GF4 MX 420

Hi,
I have a small problem with MSI G4MX420-T(S+C) ( MS-8878 ). Exactly with nVidia WDM Video Capture (universal), which " can't be turned on " by Windows XP.
I have also new drivers ...
Could someone help me?
Asus A7V333
Athlon 1700+
128 MB RAM
Thanks !!!

If you only have 10 seconds of content in a 15-second composition, then you need to either add more content or shorten your composition.
You can shorten the composition by changing the duration in the composition settings.
Since you're obviously very new to After Effects, I very strongly recommend that you start here to learn After Effects.

GF4 Ti4200-VTP 8x (MS-8889) Hardware monitoring support?

hi all,
I'm having problems with the 3D turbo experience software and also the problem with the display settings tabs (desk.cpl error message when trying to view the MSI tabs)
so my question does the MS-8889 support the hardware monitoring function? its not on the list posted in the sticky thread.......
what I found for the desk.cpl problem is that if I go to:
Display properties > Settings > Advanced > Adapter > Properties and then try the MSI tab it will show the tab but with incorrect information, fx memory
on the Display properties > Settings > Advanced > Adapter tab memory etc is displayed correctly.
Win2000, clean install from scratch using latest MSI driver (41.07)
T

posted by gfilitti
Quote
That information is in the first post in the BULLETIN sticky thread at the top of this forum.
Usually it's a good idea to take a look at the sticky posts when coming to a forum.
The Bulletin will change as I add bits of info
That information is NOT in the sticky BULLETIN, and if you would have read my post wich is usually a good idea for a forum moderator before replying and slagging off a forum newbie, you would have seen that I did read the BULLETIN.
as stated in my original post, my card (MS-8889) is not listed in the list of cards in the BULLETIN, does that mean that my card does not exist or doesnt MSI know whether or not it supports hardware monitoring?
rigorous says that he has the same card and that he got the hardware monitoring to work with v2.11 of the SW on a machine running XP, I have tried with XP and v. 2.11 with and without SP1 and also with v. 2.13 but still can not get this to work on my machine, I have also downloaded all updates from MS but still to no avail.
also updated to latest version of IE and the Macromedia flash player still no go.
same thing with latest NVidia drivers 43.45
if rigorous has this working in XP as he says he does and I have no reason to doubt him it would indicate that the hardware does support hardware monitoring so that would indicate that it is a problem with the software, does anyone know what the reqirements of the SW is?

Overheating and Lock ups with MSI TI4200 128DDR

This card seems to overheat and lock up during game play.
Does anyone have a solution?
My system:
P4 1.8Ghz 512K
Intel D845WNL
512 Mb PC133
SB Live 5.1
MSI TI4200 128DDR
WIN 98SE
300W PSU in a standard P4 case
No overclocking
Currently I play games with the case open and an external fan blowing into it.
This as fixed the problem.
I looking for a permanent solution.
Should I get a better PSU?
...or should I just get an ATI 9700 Pro

From what you said your PSU is handling the load but having a dual fan PSU will help temps by maybe a degree or two.
You may not have adequate ventilation and need to ad some fans to your case but that may be the straw that breaks the camels back if you are on the edge as far as adequate power is concerned.
There are quite a few folks that run with the side covers off but you have to keep in mind the ambient temperature where the PC is being used in any case.
So far my experience with GF4 cards is they inherently run hot and can raise the temp in your case several degrees. Nature of the beast.
Bottom line, better cooling and airflow is paramount and take a look at the heatsink, it may have been mounted poorly...this happens with any manufacturer at times and I usually re-mount it with a thermal paste of my preference. Keep in mind you will probably void your warranty with the manufacturer should you need to return or RMA the product.

MSI GF4 Ti4200 Video-in/capture on secondary monitor.???

Hi,
I have an MSI Ti4200-VTD8X (dual head, Video I/O). I am running it in dual monitor setup. When i try to view the video input on the secondary monitor i get the message:
"due to limitations of your computer's display device, this video can only play back on one of your monitors. please move the video window completely onto that monitor"
Does anyone know if this is a driver problem? or really it is a limitation with the card?. though i do not know why would the card be able to view the video capture window on one monitor but not the other?.
Thank you for any help you can provide.
L.
P.S.: system:
MSI T14200-VTD8X 128m
ASUS A7v8x Mobo
512M RAM
Win XP

Yes, I am using NVidia's nView as well as their WDM drivers. my dual monitor support seems to work fine.
Only if i want to see video input feed using something like win_DVR or Win_VCR or even Win_Producer that i get this message if the software/input winodow was on the secondary monitor.
Any help would be appriciated :D
L25

MSI Gf4 Ti4200 TD64 - Compatablity?

I have the above board and I am looking to upgrade to an Asus Nforce2 board. It says that the AGP port is 1.5v only.
Will my agp 4 card Ti4200 work with this.

fullforcefitness,
All current cards are 1.5V.
Take Care,
Richard

Ms-6585 with msi 4200 128 8x blue screen and blank screen with msi agp

here's the system,
sorry for the not usefull crap.
Operating System: Windows 2000 Professional (5.0, Build 2195) Service Pack 3
Language: French (Regional Setting: French)
System Manufacturer: MSI
System Model: MS-6585
BIOS: Version 1.00
Processor: Intel(R) Pentium(R) 4 CPU 2.53GHz
Memory: 512MB RAM
Page File: 212MB used, 1265MB available
Windows Dir: C:\WINNT
DirectX Version: DirectX 9.0 (4.09.0000.0900)
DX Setup Parameters: /PackageInstall
DxDiag Version: 5.03.0000.0900 32bit Unicode
DxDiag Notes
DirectX Files Tab: No problems found.
Display Tab 1: The file nv4_disp.dll is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: The registry information for the DirectPlay application 'Gangsters 2' is missing or damaged. You should reinstall that application.
DirectX Debug Levels
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: NVIDIA GeForce4 Ti 4200 with AGP8X
Manufacturer: NVIDIA
Chip type: GeForce4 Ti 4200 with AGP8X
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0281&SUBSYS_89431462&REV_A1
Display Memory: 128.0 MB
Current Mode: 1024 x 768 (32 bit) (75Hz)
Monitor: Écran Plug-and-Play
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0001.4345 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 3/20/2003 20:13:00, 3097098 bytes
WHQL Logo'd: No
WHQL Date Stamp: None
VDD: n/a
Mini VDD: nv4_mini.sys
Mini VDD Date: 3/20/2003 20:13:00, 1261418 bytes
Device Identifier: {D7B71E3E-41C1-11CF-2B67-42A900C2CB35}
Vendor ID: 0x10DE
Device ID: 0x0281
SubSys ID: 0x89431462
Revision ID: 0x00A1
Revision ID: 0x00A1
Video Accel: ModeMPEG2_A ModeMPEG2_B ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: {212DC722-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{212DC722-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{212DC722-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
i cannot run agp 4x and 8x
if i try to tweek my vid card, i have blue screens
i cannot run any msi agp drivers (all i see is mouse cursor)
i'm running nvidia drivers
help me !!!

Quote from: Bas on 01-November-08, 19:55:21
Try again with Vista 32bit, 64bit is highly unstable and only a few have it running stable.
I've been running Vista x64 for the past nine months, and now with my K9A2 P--and have had no problems. I mean, none. Have not had any occasion to even consider reinstalling Vista x32. Vista x64 has been stable as a rock for me consistently since I installed it. Would not consider going back to XP under any circumstances.
There is a problem with Beard0's system that I would say boils down to device drivers or faulty hardware or some combination thereof. His experience is dramatically different from my own, and the problems he's having are not indicative of my experience with Vista, whether x86 or x64.

Cant go above 235fsb with MSI neo4 plat SLI

I have started OCing my rig and it seemed to be going very well until 235fsb, now i have reached 2.35gig on the 3200+venice and DDR470 2.5-3-3-7 timings, and this is @Vcore1.45, 1.6chipset voltage and 2.7 RAM voltage, i tested for stability with SuperPI 16mb test and it finished successfully.
the problem is that whenever i try to go beyond these speeds SuperPI never completes the 4mb or higher tests, i upped the Vcore to 1.51 and lowered the RAM to DDR200, but it seems like no matter what i do i can never finish the test not even at 2.37gig,
any ideas??
::EDIT:: i have come across something on hardocp review for this mobo:
"It seems that the board is limited to a 235MHz FSB with the Aggressive timing option in the BIOS Cell Menu screen enabled. Anything above that FSB and the system will not post. However, it is a vastly different story with the Aggressive timing option disabled."
now i am sure that i have disabled agressive timings, but i still have the same problem.
pls help.

I suggest you read the sticky above about overclocking a neo4 board, disabling a couple of bios settings is required, including cpu spectrum among others, you need to do some research before you make a statement like " I can't or it won't", you havent done your homework on this, and it kind of sounds like you have posted here to get some quick and easy answer..... you are going about this backwards in my opinion, if you would have researched you would have already known about this disabling of bios settings....before you go ahead any further I suggest that you take some time to get the basics down first or else you are going to hit a lot of unecessary brick walls and you might end up doing damage to your system, upping voltage is to be used with caution and not as a quick fix, your bios settings and lack of knowledge are the only thing holding you back right now, and btw expect for it to take a couple of days to get it down right, ocing is about careful and caculated trial and error and it usually isn't something you can do off the top of your head, different boards over clock differently, then throw in the variable of which speed of ram you are using, what type of ram, your cpu cooling solution, your power supply, lots of variable to work through...get my drift.
Good luck and have a good day.

Bios update for MSI GF4 Ti4200-TD64 out now!

Hi.Well on Liveupdate there is out MS 8870 BIOS,and there is 3 BIOS:
Ver100
Ver110
Ver120
Here is the link:http://tw.msi.com.tw/autobios/SVga/Bios/Ms8870/
Anyone knows whats been fixed in this BIOS versions?

Hi there,
I got this message from MSI:
Quote
We may release different version of BIOS for the same
model but different options.
For example above,
MS-8870 BIOS version 1.00 is for MS-8870 64MB
MS-8870 BIOS version 1.10 is for MS-8870 128MB
MS-8870 BIOS verison 1.20 is for MS-8870 64MB (a
different memory type)
A wrong version may case the system never boot
again!!!
Be very carefull what you download!

Display and Boot Problem with MSI K9NGM2

I recently purchased a system:
- AMD Athlon 64 X2 4200 Core Duo
- MSI K9NGM2
- 1 GB Kingston RAM
- 320 GB Sata seagate
- Sony DVD RW
- 450 Watts Power Supply
The very first day I started having problems with my system. Sometimes it never showed a display and if it does it was not able to recognise my hard disk. I have to reboot it several times before it does. I think its the computer who decides when to boot and when not to. I got it checked and the vendor says that everything is fine , although he is also not able to respond to my problem. The Sata cabling and the Ram has also been replaced twice but still the problem persists.
Does anyone have any answer to this problem.

"PSU Details
+3.3V 10A Orange , +5V 15A Red , +12 V 8A Yellow , -12V 0.5A Blue , -5V 0.5A White , +5VSB 2A Purple"
oh my god
replace that "PSU" mate, (that PSU is directly for trash) get a decent one. (single rail, with high amperes on +12V (30A for example)) avoid noname/unknown,Q-Tec,Codegen brands
Good PSU Recommendation:
https://forum-en.msi.com/index.php?topic=103299.msg757739#msg757739
Add-on to read:
PSU's---2 x 12v---The Dual Rail Myth
Is your problem caused by your PSU?
good suggestion can be found here:
https://forum-en.msi.com/index.php?topic=105635.msg783148#msg783148
https://forum-en.msi.com/index.php?topic=103299.msg757739#msg757739
Good PSU vs Cheap/Unamed/Budget PSU Oscilloscope scan:
Bad PSU:
Quality PSU:
Cheap PSU Codegen 350W:
Enermax 365EG(350W):
What would happen if your PSU can't cope with the load?
* bad 3D performance
* crashing games
* random shutdown
* spontaneous resetting PC
* freezes during gameplay
* PSU overload can cause it to break down

640x480 and above, capture with MSI GF4 Ti4200 VTP

Similar Messages

Maybe you are looking for