6465b - Bios and ssd issue. Intel 520 not recognized by BIOS.

Hi,
I am writing with 2 issues.
First, BIOS issue.
BIOS F.20 for 6465b and 6565b is no longer available. The current version on HP support page is BIOS F.03. Anybody know why it was changed?
When will be released F.22 which should enable support for SATA III, as F.22 for 6x60b notebook?
Second, ssd issue, which I believe is connected with Bios.
I've bought Intel 520 120gb SSD and it is not recognized by BIOS. When I put it as primary hard drive and turn notebook on,i go 5 blink of caps + num lock, and al stuck.
I can't install system. But ssd works when in external eSATA enclosure. So it isn't ssd related problem.
I know for sure that 320, m4 are perfectly working on 6465b. Other SF drives, Force GT and Agility 3, too.
What is wrong with 520, and how it can be resolved. I think only new BIOs, unfortunately.

I can confirm that an Intel 520 SSD in combination with an HP 6465b is an issue.. The CAPS + Scroll blink 5 times while in POST. This indicates a general mainboard issue, but I am 100% sure that there is an incompatibility between the two  
I have installed BIOS F.21 and the firmware of the Intel SSD is standard (errrr 300i if I'm not mistaken). 
Right now the laptop is useless (it has to have a SSD drive for our developer-dudes) so I'm hoping HP will release F.22 soon.. Where did you find that F.22 will add support for SATAIII? 
Stupid thing is, when I put the drive in a really old beast (HP nx7400) the SSD works without hickups. 

Similar Messages

  • I just bought a mac mini over the weekend. I saved items from my old G4 to an external hard drive. I go to plug in the external hard drive and the new computer is not recognizing it. Help.

    I just bought a mac mini over the weekend. I saved items from my old G4 to an external hard drive. I go to plug in the external hard drive and the new computer is not recognizing it. Help.
    Here is the information I have. The external hard drive is a 120GB Acomdata. It has both USB and Firewire. When I go to plug in to the mac mini through USB, it is not being recognized. When I switch to Firewire on the old computer I can see it, however when I go to USB it is not being recognized (even on the old computer).
    I'm at a loss as to what to do. Any advice would be helpful.

    Shalese wrote:
    Have you ever tried the FW 400 to 800 adapter?
    I have used them on multiple occasions and they work just fine.
    Try this (maybe you already have):
    -Boot Mini with drive disconnected.
    -Do not connect drive but turn it on
    -wait a few seconds for drive to spin up
    -plug cable into the Mini then into drive.
    This is an old drive and may have some timing
    issues.
    I had an Acomdata drive a long time ago.  It
    worked fine with FW but USB was flakey.

  • Can any one help me to fix my ipod touch it wont recognized by my laptop and itunes its said usb not recognized itried all the tips like reboot and restore plshelp me thanks

    can any one help me to fix my ipod touch it wont recognized by my laptop and itunes its said usb not recognized its freeze iin display usb and itunes logo pls help me pls itried all the uninstall unknown device and reboot the ipod and restore pls help me thanks

    Try the suggestions found here: http://www.apple.com/support/ipodtouch/assistant/itunes/

  • After upgrade IPHONE 4 to IOS 7 , it work 2days, and now it is off, not recognized on the pc and no battery logo when connecting to the sector

    After upgrade IPHONE 4 to IOS 7 , it work 2days, and now it is off, not recognized on the pc and no battery logo when connecting to the sector

    I'm happy to say that I solved the problem, and for the community (for the "next generation" that will search a solution for this problem) - I will publish the solution for this problem : I defined as new iphone, and then the restore showed up!
    All wishes everyone...

  • I have recently updated my OS from Leopard to Snow Leopard but now my external hard drive and even my iPhone are not recognized by my Macbook Pro!  Anyone have a suggestion??

    I have recently updated my OS from Leopard to Snow Leopard but now my external hard drive and even my iPhone are not recognized by my Macbook Pro!  Anyone have a suggestion??

    Zap the PRAM and Reset the SMC, then try again. If the problem remains, update to 10.6.8 and repeat.

  • Downloaded the latest update and now my iphone is not recognized in itunes

    I downloaded the latest update on my computer for Itunes and now my Iphone is not recognized when I plug it into the computer or open Itunes>

    Device not detected in iTunes for Windows

  • What do I do when I plug in my iPod to charge and it says "USB Device not recognized"?

    What do I do when I plug in my iPod to charge and it says "USB Device not recognized"?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • I downloaded the latest itunes and now my iphone 42 not recognized.  what the heck is the problem?

    I downloaded the latest itunes and now my phone is not recognized.  I have read all sorts of fixes and none of them work.  what the heck is the problem, Apple?

    I got it working.  I uninstalled both iTunes and apple mobile device support and then downloaded iTunes again.  That took care of the problem.

  • In Stpo transport, load and goods issue line is not appear

    Hi MM Expert's
    I am creating the STPO's (Different company codes) in items details -> Del.sch-> transport, load date and goods issue is not appear. The Delivery date is 25.02.2008. next day the user as change the del.date from 25th to 26th. transport,load date and goods issue is appear.
    Anybody plz tell me how its happen like this, and tell the root cause.
    Regards
    chandru.

    hi
    shipping point calendar and route calendar must be equal here.
    but
    i dont know why these are different here.
    because it is overtaking or superseeding the shipping calendar here.
    make the shipping point and route calendar in sync with each other.
    test and confirm
    balajia

  • I recently upgraded to ios7 and now my PC is not recognizing my iphone

    I am having several problems.  I recently upgraded to ios7 and now my PC (Windows 7) is not recognizing my iphone.  1) I am getting an error message when itunes opens: "Itunes could not connect to the iphone because it is locked with a passcode. You must enter your passcode on the iphone before it can be used with itunes."  How did it get locked and how do I unlock it without losing my data?  What do they mean by passcode?  I don't have a 4-number code to get into my iphone activated.  In fact, I've never had a passcode.
    2) I cannot download my photos from my iphone onto my computer because my computer doesn't recognize my iphone.  In other words, my iphone does not show up on my computer (no iphone icon, no DCIM folder). 
    3) This is a separate issue but it is also very confusing: I went online to check my iCloud and I cannot see any data (icloud.com).  But I know that I set up iCloud when I upgraded to ios7 and it backs up my data every night. What am I doing wrong, am I unable to see my data and photos?
    Why is this happening?  It was bad enough that when I upgraded to ios7, I lost my Notes - I have no idea why they didn't return.  But now essentially my iphone is not recognized when connected to my computer and this is very frustrating.  I have read numerous previous postings regarding downloading photos onto the PC and regarding this passcode error and cannot find a resolution, so I would appreciate any help.

    No problem!
    This will make it easy for you:
    http://www.tuaw.com/2011/07/09/quicken-wont-run-on-lion-heres-10-mac-apps-to-cur e-those-blue/

  • Is Apple dealing with this issue? iPod not recognized...

    I just got my 30gb video iPod today. First it was frozen and not recognized. Tech support helped me get it unfrozen and then it was recognized. I loaded music, photos, videos and tv shows. I disconnected and tried out the iPod all works great. Went to go add more music and not its not recognized. I have the latest version of iTunes, the updater on laptop and desktop, both give the same message. Going through messages here it seems others are having the same problems. This has to be an issue with the iPod. I checked Disk Management but it doesn't show up.
    Does anyone know of a solution?
    For the first 90 days you get one call to support, I've already used that. This just really seems to be an issue with the iPod.
    Any help/ideas appreciated.

    Hope this helps
    http://docs.info.apple.com/article.html?artnum=93976
    Troubleshooting iTunes, iPod Software, and QuickTime installation on Windows
    If you are having trouble installing iTunes for Windows, iPod, or QuickTime software on your computer, here are some things to note and try.
    Make sure you have admin access
    To install iTunes, iPod, or QuickTime software, you need to be logged in as an administrator on the computer. If you're not sure if you have administrator access, contact the owner of the computer or your system administrator.
    Get the latest Windows updates
    The first thing to do when troubleshooting an installation issue on a Windows computer is make sure you have the latest Windows updates installed—to get the latest updates, go to the Microsoft Windows Update page.
    iTunes, iPod, and QuickTime software for Windows require Windows 2000 with Service Pack 4, or Windows XP with Service Pack 2.
    Note: Windows 2000 users should have the latest Windows Installer engine installed.
    Do you see an error message?
    Here are some of the common errors and what you can do about them:
    iTunes for Windows: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
    Error 1920. Service Bonjour Service (Bonjour Service) failed to start
    Error -1607: Unable to Install InstallShield Scripting Run Time. (Scenario One)
    1607: Unable to install InstallShield Scripting Runtime. (Scenario Two)
    Error -1608: Unable to Create InstallDriver Instance
    1628: Failed to Complete Installation
    Error 1628: Failed To Complete Script Based Install
    Error 1406
    Error -1324: The Folder Path Contains an Invalid Character
    Error 1606. Could Not Access Network Location
    Error 1327 Invalid Drive
    Error 1335
    Error connecting to service manager.
    Error = 0 Failed to install GEARAspiWDM. Installation unsuccessful.
    No error message displays, however the iTunes installation disappears from screen and does not finish.
    If your error isn't listed above, or if the steps in the linked articles haven't helped, here are some other things you can try to resolve your installation issues:

  • Why iPhone 4s and iPad 2 mini are not recognized by iTune.

    I have and iPhone 4s and a iPad 2 mini who have been upgraded to iOS 7.1.1 both and now that i want to sync them to my computer who is running windows 7 premium family edition, they are not recognized. I get this when i plug in my phone or pad ( this iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes). I have done that twice and nothing is happening getting frustrated please help....

    See the troubleshooting tips in:iOS: Device not recognized in iTunes for Windows
    Also see:Troubleshooting issues with iTunes for Windows updates

  • Trying to upload raw cr2 files and Lightroom says "file is not recognized"

    Backstory: I photographed a VERY important commercial shoot today and I went to upload the photos to Lightroom. The first 30 images uploaded just fine, but the rest won't. Lightroom says the file is not recognized by the raw format support in Lightroom (401). Everything is updated in my computer... Lightroom, Photoshop ect. Photoshop also says that the file cannot be read. I can't open them in iPhoto or preview either. BUT I can see the thumbnail when I click the camera card reader on the desktop. I am uploading from a card reader as well. I shot with this card yesterday and everything was fine. I NEVER delete photos off my camera, and I always format it. If it is corrupted, how do you I find that out, and is there anyway to get my photos back?
    Is there anything I can do to fix this? I am panicking. Help, please.
    Thank you in advance

    The two raw files you've uploaded to dropbox are corrupted so Lightroom and Photoshop are giving you the correct message.  At least with these two, the embedded JPG preview is there but the raw data is not correct so cannot be rendered.  Here is the error that Canon's own software gives when the files are attempted to be edited:
    You should reattempt to copy the images from the memory cards to your computer using a card reader and an operating-system function (Explorer or Finder) to do it rather than LR or a cable connected to the camera, then see if things work any better.  If you already used a card reader, then try a different one and see if the situation improves.
    If you cannot get a better set of images by retransferring them, then we can work through how to extract the embedded JPG previews en masse.

  • I just bought a new ipod and I'm trying to download my itunes library and games but itunes is not recognizing my new ipod. I have followed all the instructions from apple asistant except deleting and reinstalling itunes.  What can I do.

    I bought a  new Ipod (5th generation).  I am trying to sync it to my itunes.  I tunes does not recognize my new ipod. It is registered.  I was only able to download purchases I made from my old ipod.  I cannot download my itunes library or any of the games I have purchased. I tried using the troubleshooting guide to no avail.  The only thing I did not do was to uninstall and reinstall itunes.  I did update it to the latest version. How can I get  itunes to recognize my new ipod?

    - You do have iTunes version 11 on the computer, right. Saying the latest is not sufficient.
    - Have you tried everthing here:
    iOS: Device not recognized in iTunes for Windows
    - You should
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Your library/media will not be affected.
    - Does the iPod charge?

  • While updating my Ipod to ios 5 an unexpcted error occured and now my ipod is not recognized by itunes or my computer and all data has been removed. What can I do

    While updating my Ipod to ios 5 an unexpected arror occured before my data was restored and now Itunes will not recognise my Ipod. My Ipod is also not seen as a device in My Computer but asks me to install drivers. What can I do?

    - First I would remove and reinstall all the Apple software using the following and then restoring the ipOd.
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    - Next see if manually placing the iPOd in recovery mode will allow a restore. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Next try DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Next try another computer/cable to help determine if you have a computer or iPod problem.
    - If the other computer works and yours does not see:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Maybe you are looking for

  • Filling of form fields changing depending on how PDF is opened, why?

    First of all, here is the error message that I am trying to deal with: "This document contained certain rights to enable special features in Adobe Reader. The document has been changed since it was created and these rights are no longer valid. Please

  • XML 2 HTML. Please help..

    Is there any standard API / programme(already written) in Java, to convert a HTML document to XML and also XML to HTML. Any suggestions, tips, links are appreciated. Please help. Thanks in advance, Xej.

  • Trying to format text in filemaker using AS

    i have a db in failmaker and often cut and paste (drag and drop) entries into the db from other programs. when i do this FM preserves the formatting of the source. i dont know how to avoid this. so i thought that a little AS which scans entries and r

  • Menu Option in j2me

    Hi all, I want to write a code in which i want to select one by one images using menu options..or sub menu option. If somebody have the menu option code or any good tutorial to have this j2me menu stuff... Plz send it....I will appreciate this. Thank

  • Change LVOOP Class Icon Color on All Members

    I have a LVOOP class hierarchy (LV2009) composed of several classes that when created I used the default randomly selected color for each class.  For each class I have developed several member elements (VIs, Ctls, etc), and now I have decided on a co