648F NEO L - performance vs. crash

My PC:
MSI 648F NEO L (BIOS 7.3)
Intel Celeron 2GHz Box (think Northwood is codename)
512 APACER PC3200
80Gb/7200rpm MAXTOR
MSI GForce 4 MX 440 FX8
My problem is in installing new OS (trying WinXP,2000,98, Linux)
When installer copying basic install files, the PC simple stop, I don't know why
When i change cache to WriteThru policy, I can install OS but it's something about 4 hours of inst(not acceptable for this machine;o).
When I received this MB+CPU, I have that same problem. After 3days combinating BIOS settings I have lucky and my PC go verywell (but I don't know what i do) and work good 5 months
Yesterday I cleared BIOS and the problem is back. When I try reinstall os, it freeze on copiing basic os install files.
Windows freeze after loading mup.sys
p.s.: my english is very bad, I'm sorry
Matej

Go into the BIOS and Set the DRAM (VDIMM) Voltage to 2.65 or 2.7 Volts, as this Should Help ...Now I dont Understand , Are you Trying to Install ALL of those Operating Systems onto the Same HDD? Or you are saying that you have tried installing All at one time or another, and None of them Remained Stable?.............Sean REILLY875

Similar Messages

My 648F Neo Series don't work

Hi, I have a 648f Neo Series with RealTek AC'97 Audio integrated. The RealTek AC'97 don't work and IS NOT A DRIVER PROBLEM.
There are some "hardware protection (ex: jumper, fuse)" or something like that???
PLEASE HELP ME!!!

Why do you say so?
Is onboard AC 97' enabled?
Have you tried Realtek and C-Media's drivers?
What is your full system specs and PSU specs amps?
Read the guides: Power Supply Guide Moan Guide Realtek Guide by Backwoodz

648F Neo and Geforce FX 5200

Hi
Bought a new motherboard and cpu for my better half (648F Neo + celeron 2.4)
We tried to put in my old gfx card (MSI geforce FX5200) but the system keeps "freezing" as soon as we start any programs that demand just the smallest part og the gfx card the whole system stalls (cant move mouse ect). We have now put in at cheap Radeon card in the maschine (Radeon 9200SE) and weirdly enough it runs without any problems at all.
Could be really nice if we could get the FX 5200 card to work instead its alot easier to setup than the Radeon.
Can anyone help me here?
The psu is a brand new Codegen 300W and the ram is Kingston value.
//Mostly

Assuming that the FX5200 is healthy, I would have started with at new PSU
(Q-Tec and Codegan have a bad reputation with low amp on every line ).
A new PSU with your setup should at least be around 3,3v-25amp / 5v-30amp
and 12v- 17amp to be sure that not the source for other problems ( not only the VGA problem )
If you still want to try with your 300w codegan, then try som older or newer VGA driver and see if that make some differans.
http://www.nvidia.com/content/drivers/drivers.asp
and raise the mem.voltage in bios to 2.7v while you´re at it !!

MSI 648F NEO SiS AGP trouble/wont detect nvidia FX5200

Hi!
I recently did an emergency build using the 648F Neo (my old syntax board died). Everything went well, but when I went online I noticed my graphics were very choppy. I checked my Display settings and noticed that my nvidia fx5200 wasn't even being recognized!
I went to the Device Manager, and saw that the 5200 wasnt listed their, either. However, I did notice that under "System Devices" there was a listing for "SiS Accelerated Graphics Port", and this listing had the yellow-dot-with-an-exclamation-point warning attached to it. However, when I right clicked on it, and checked the driver, it listed the driver as "5.1.2600.2180" , with a driver date of "12/9/2004". I used the driver off the Cd, and off the MSI website, but with no different result.
The device manager also provides me with this info: "This device cannot start. (Code 10)".
When I try to download the nvidia driver, it informs that it could not detect any drivers that are compatible with my current hardware.
Any suggestions?

Here's where we stand:
I got rid of of the drivers i had installed, both AGP and Nvidia.
I started in safe mode, and reinstalled SiS AGP driver ver. 1.21
I then tried to install the nivida drivers.
Same result: "could not find drivers compatible with hardware" etc.,
My device driver screen shows that the Sis Accelerated Graphics Port fails to start ANYTIME I have 1.21 loaded up. Should I try an older version? Even if i dont try to install the nvidia drivers, I still get the exclamation point warning that the SiS AGP failed to start.

SOS With My 648F Neo...Somebody Help Me

I Have a Big Problem with My 648F Neo. When i press any key, the system freeze or spikes, the sound and the video stops.... I have updated all my drivers including the last bios 7.45 and reinstalled the OS ....I need to know whats Going On, Im a newbie....
648F Neo
Bios 7.45
P4 2.4C Hyper Threding 800MHZ
Kingston 256MB DDR PC2100
Nvidia Geforce 4 MX4400 64MB DDR AGP 8x TV Out
Power Supply 400W
Maxtor 80GB
LG 52X32X52X
Lite On DVD 16x
Windows XP Professional Edition SP1

hELLO, i have Fixed my Bug and i have no more Spik.... I went to the place where i bought my mobo and the processor, then, they tested all the parts, the mobo was not the problem, THE PROCESSOR HAD A TECHNICAL PROBLEM, they replace me the PROCESSOR and now i have my 648F neo Working Without Problems with my new p4 2.8....
648F Neo
Bios 7.45
P4 2.8C Hyper Threding 800MHZ
Kingston 256MB DDR PC2100
Nvidia Geforce 4 MX4400 64MB DDR AGP 8x TV Out
Power Supply 450W
Maxtor 80GB
LG 52X32X52X
Lite On DVD 16x
Windows XP Professional Edition SP1

[SIS Series] I have a MSI 648f Neo on start up I get 2 beeps followed by 1 beep.

I have a 648f Neo board wirh 512 Corsair memory.
At start I get 2 beeps followed by 1 beep. The vidio will not post.
Can any one help me?

can u list your full system spec including the power supply.
Try to reseat your video.

Msi 648F Neo - standby

Hi all! I am new here so I would like to greet you!
I have 2 questions for which I would really appreciate your help.
1) I have MSI 648F Neo motherboard. Do you know how I can enter in stand-by mode? Also, do you know how I can keep the network running when I enter in standby mode?
Just to explain, I have recently installed a remote-communication software in my office PC so as to check my e-mails from my home PC. However, I would like to set my office PC in stand-by mode when I leave from the office (so as not to consume too much electricity) and be able to wake it up from my home PC when I use this software. I suppose that the only way to do this is for the network to keep running when the PC is set to stand-by mode. Do you have any idea how I can do this? (or generally any other idea that may help?)
2) Recently a friend of mine has given me a 100gb hard drive. However, this hard-drive is SATA and my motherboard has only IDE outlets. Do you have any idea how I can connect the SATA hard-drive to my MSI 648F Neo mother board? (through USB maybe? or through any IDEtoSATA adapter?)
I thank you very much in advance for replying to my questions and I really appreciate your assistance.
Michael

Quote
1) I have MSI 648F Neo motherboard. Do you know how I can enter in stand-by mode? Also, do you know how I can keep the network running when I enter in standby mode?
Just to explain, I have recently installed a remote-communication software in my office PC so as to check my e-mails from my home PC. However, I would like to set my office PC in stand-by mode when I leave from the office (so as not to consume too much electricity) and be able to wake it up from my home PC when I use this software. I suppose that the only way to do this is for the network to keep running when the PC is set to stand-by mode. Do you have any idea how I can do this? (or generally any other idea that may help?)
in BIOS Power Management settings, set standby/suspend mode to "S3". look for "Wake on..." options, and enable as desired
in Windows, go to Power Options in Control Panel. you can set your computer to go into standby mode automatically if not used for a period of time. you can also change the behaviour of the Power button on your case, to enter standby mode instead of shutting down
Quote
2) Recently a friend of mine has given me a 100gb hard drive. However, this hard-drive is SATA and my motherboard has only IDE outlets. Do you have any idea how I can connect the SATA hard-drive to my MSI 648F Neo mother board? (through USB maybe? or through any IDEtoSATA adapter?)
you can buy a PCI SATA Controller card

MSI 648F Neo with ASUS N7600GS video

Hi!
When my ABIT KD7 motherboard died, I changed to a MSI 648F Neo motherboard. The problem is that the MSI works fine with a GeForce FX5200 video card, but won't even boot with a N7600GS.
My ABIT KD7 worked fine with both of those cards.
MSI motherboard supports AGP8x, N7600GS is AGP8x.
MSI chipset is SiS 648FX - which is a universal 1.5V AGP 3.0.
N7600 - Universal 1.5V AGP 3.0 Card.
Does anyone know what is the problem? Maybe I need to update something or the 648F isn't compatible with a N7600GS?

Quote from: NovJoe on 27-January-12, 10:46:04
Please update your SIS system driver.
http://www.msi.com/product/mb/648F-Neo---Neo-L.html#/?div=Driver&os=All
Did it. Same situation, only when I changed it back to my older video card the first time I turned on the PC it started beeping like crazy and I nearly shat my pants But I reinserted it and everything is back to normal.
I think this is just one of those rare situations where the 2 compatible things aren't compatible.

MSI 648f Neo-L

Hay. My motherboard (MSI 648f Neo-L) broke earier when i tryed to update my RAM. So just thought, OK, i'll buy a new one. But where ever i turn, none sells them. So i wanna know, What motherboards support the same components as MSI 648f Neo-L? I really need a fast answear.
Best Regards.

Quote from: Mr Wulf on 04-June-06, 00:39:28
The current model closest match which I can find is
MSI 661FM2-LSR Socket 478 SIS 661FX Micro ATX Intel Motherboard - Retail
Specifications here
It will be similar in many regards and will support your components but only has 2xmemory slots.
Maybe you can choose a mainboard which you like the look of and post the model number so I can see if it might be compatible.
i think i will buy http://www.newegg.com/Product/Product.asp?Item=N82E16813130467 that one. Does it work?

How do I fix Adobe Photoshop performance and crashes?

The performance of my computer is very slow and when ever I try to run Adobe Photoshop my computer freezes up and crashes. Have this continues problem. Not sure how to fix.

Downoad the trial version and activate it with your serial number.
Mylenium

Performance Analyzer crashes with "java.io.IOException: Broken pipe"

Hi,
I profile a distributed application using collect and Performance Analyzer. Till now, the Performance Analyzer really worked out nicely (thanks for that tool).
However, since a couple of days, I work on a modified sideline of the code which crashes Performance Analyzer reliably when selecting a specific function in the "Function" tab.
Has anyone of you experienced a similar problem or can give advice on how to work around this problem?
(BTW: There is a bug report on broken pipes when multiple writers access a pipe - http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4028322 - but I'm not sure if this is the case here)
I get the following error message:
Exception in thread "AWT-EventQueue-0" com.sun.forte.st.mpmt.IPC$AnIPCException: java.io.IOException: Broken pipe
at com.sun.forte.st.mpmt.IPC.sendByte(IPC.java:410)
at com.sun.forte.st.mpmt.IPC.send(IPC.java:559)
at com.sun.forte.st.mpmt.SummaryDisp.getSummary(SummaryDisp.java:430)
at com.sun.forte.st.mpmt.SummaryDisp.doCompute(SummaryDisp.java:156)
at com.sun.forte.st.mpmt.AnWindow.updateSummary(AnWindow.java:1366)
at com.sun.forte.st.mpmt.FuncListDisp.updateSummary(FuncListDisp.java:223)
at com.sun.forte.st.mpmt.FuncListDisp.access$400(FuncListDisp.java:11)
at com.sun.forte.st.mpmt.FuncListDisp$TableHandler.valueChanged(FuncListDisp.java:405)
at com.sun.forte.st.mpmt.AnTable.fireAnEvent(AnTable.java:827)
at com.sun.forte.st.mpmt.AnTable.access$2700(AnTable.java:20)
at com.sun.forte.st.mpmt.AnTable$CellHandler.valueChanged(AnTable.java:869)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:167)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:147)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:194)
at javax.swing.DefaultListSelectionModel.changeSelection(DefaultListSelectionModel.java:388)
at javax.swing.DefaultListSelectionModel.changeSelection(DefaultListSelectionModel.java:398)
at javax.swing.DefaultListSelectionModel.setSelectionInterval(DefaultListSelectionModel.java:442)
at javax.swing.JTable.changeSelectionModel(JTable.java:2294)
at javax.swing.JTable.changeSelection(JTable.java:2363)
at javax.swing.plaf.basic.BasicTableUI$Actions.actionPerformed(BasicTableUI.java:532)
at javax.swing.SwingUtilities.notifyAction(SwingUtilities.java:1636)
at javax.swing.JComponent.processKeyBinding(JComponent.java:2844)
at javax.swing.JTable.processKeyBinding(JTable.java:5196)
at javax.swing.JComponent.processKeyBindings(JComponent.java:2890)
at javax.swing.JComponent.processKeyEvent(JComponent.java:2807)
at java.awt.Component.processEvent(Component.java:5815)
at java.awt.Container.processEvent(Container.java:2058)
at java.awt.Component.dispatchEventImpl(Component.java:4410)
at java.awt.Container.dispatchEventImpl(Container.java:2116)
at java.awt.Component.dispatchEvent(Component.java:4240)
at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.java:1848)
at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(DefaultKeyboardFocusManager.java:693)
at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(DefaultKeyboardFocusManager.java:958)
at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeyboardFocusManager.java:830)
at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.java:657)
at java.awt.Component.dispatchEventImpl(Component.java:4282)
at java.awt.Container.dispatchEventImpl(Container.java:2116)
at java.awt.Window.dispatchEventImpl(Window.java:2429)
at java.awt.Component.dispatchEvent(Component.java:4240)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
Caused by: java.io.IOException: Broken pipe
at java.io.FileOutputStream.writeBytes(Native Method)
at java.io.FileOutputStream.write(FileOutputStream.java:260)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at com.sun.forte.st.mpmt.IPC.sendByte(IPC.java:407)
... 45 more
Exception in thread "AWT-EventQueue-0" com.sun.forte.st.mpmt.IPC$AnIPCException: java.io.IOException: Broken pipe
at com.sun.forte.st.mpmt.IPC.sendByte(IPC.java:410)
at com.sun.forte.st.mpmt.IPC.send(IPC.java:559)
at com.sun.forte.st.mpmt.AnWindow.setSelObj(AnWindow.java:2315)
at com.sun.forte.st.mpmt.FuncListDisp$TableHandler.valueChanged(FuncListDisp.java:404)
at com.sun.forte.st.mpmt.AnTable.fireAnEvent(AnTable.java:827)
at com.sun.forte.st.mpmt.AnTable.access$2700(AnTable.java:20)
at com.sun.forte.st.mpmt.AnTable$CellHandler.valueChanged(AnTable.java:869)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:167)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:147)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:194)
at javax.swing.DefaultListSelectionModel.changeSelection(DefaultListSelectionModel.java:388)
at javax.swing.DefaultListSelectionModel.changeSelection(DefaultListSelectionModel.java:398)
at javax.swing.DefaultListSelectionModel.setSelectionInterval(DefaultListSelectionModel.java:442)
at javax.swing.JTable.changeSelectionModel(JTable.java:2294)
at javax.swing.JTable.changeSelection(JTable.java:2363)
at javax.swing.plaf.basic.BasicTableUI$Actions.actionPerformed(BasicTableUI.java:532)
at javax.swing.SwingUtilities.notifyAction(SwingUtilities.java:1636)
at javax.swing.JComponent.processKeyBinding(JComponent.java:2844)
at javax.swing.JTable.processKeyBinding(JTable.java:5196)
at javax.swing.JComponent.processKeyBindings(JComponent.java:2890)
at javax.swing.JComponent.processKeyEvent(JComponent.java:2807)
at java.awt.Component.processEvent(Component.java:5815)
at java.awt.Container.processEvent(Container.java:2058)
at java.awt.Component.dispatchEventImpl(Component.java:4410)
at java.awt.Container.dispatchEventImpl(Container.java:2116)
at java.awt.Component.dispatchEvent(Component.java:4240)
at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.java:1848)
at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(DefaultKeyboardFocusManager.java:693)
at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(DefaultKeyboardFocusManager.java:958)
at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeyboardFocusManager.java:830)
at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.java:657)
at java.awt.Component.dispatchEventImpl(Component.java:4282)
at java.awt.Container.dispatchEventImpl(Container.java:2116)
at java.awt.Window.dispatchEventImpl(Window.java:2429)
at java.awt.Component.dispatchEvent(Component.java:4240)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
Caused by: java.io.IOException: Broken pipe
at java.io.FileOutputStream.writeBytes(Native Method)
at java.io.FileOutputStream.write(FileOutputStream.java:260)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at com.sun.forte.st.mpmt.IPC.sendByte(IPC.java:407)
... 41 more
Thanks for your ideas, Manfred

Which version of the Analyzer are you using? What OS, and
what compiler did you use? Which version of Java are you using?
(I doubt that the problem is related to the bug you cited; only
one thread reads the pipe, and the bug concerns thread-safety
reading from a pipe.)
The most likely explanation is that er_print, the backend
server that does the work for the GUI crashed. Is there a core
dump from er_print in the directory?
I'd suggest that if you're not using Sun Studio 12, patch_01,
you upgrade to that and see if it still reproduces the problem.
If it still crashes, we'll need more information to pursue it.
You can send me email at marty dot itzkowitz at sun dot com
We will need the experiment, and the a.out and .o containing the
problematic function, and, of course, specific instructions for
how to reproduce the problem.
Marty Itzkowitz, project lead, Analyzer

K8N Neo - High Performance Mode Killed System?

I'm slightly frazzled at the moment, so forgive me for any mistakes. I installed the K8N Neo Platinum on Tuesday night, with a brand new Athlon64 3200+ with 1mb L2.
Video Card: VisionTek Xtasy Geforce4 Ti4400
Memory: 2x Kingston 512MB 400MHz DDR PC3200
Power Supply: Antec True550
+3.3V @ 32A
+5V @ 40A
+12V @ 24A
I installed the various MSI applications tonight, including CoreCenter. Attempted to adjust the FSB with it, but with just a 2.5% increase, the temperature of the CPU was getting higher than I cared to see during stressful applications. So I set it back to default, and later on read up on the BIOS settings in the manual... I read the description of "High Performance Mode", and figured I would try setting it to Optimized.
Seemed like a good idea, let the board I had read was great for overclocking do it's stuff automatically. So after I set it to optimized (Didn't change anything else), I hit F10 and let it reboot. It never did. When it rebooted, the power stayed on, Hard Drive light showed it was being accessed... Only problem was absolutely no video was being sent. Monitor was as black as black could be.
Turned the power off, tried again and again. Same deal. Power comes on, HD shows it is being accessed constantly for about 20 seconds, then just stops. But no video is being output, which leads me to think the system is just dead in the water for the most part.
During this state, the LED's on the back are as follows: Top two are red, bottom two are green. I saw in another thread someone was going on about there being an explanation for them, but I don't have it in my manual nor could I find an explanation of them.
At this point I'm just shaking my head, because there is absolutely nothing to be done as far as I can tell. If anyone has any ideas as to a possible solution or at the very least, whether the MB just went nuts or something worse happened, I'd greatly appreciate it. I'm at a loss and afraid to even think what might be the problem.

While the "high performance settings" can surely make the pc unstable, it should hardly ccause hardware-damage.
Turn the computer off (to be safe, remove the power-cord)
Clear cmos with the jumper (instructions can be found in your manual)
Wait 30 seconds
Put the jumper back to its original position.
Power on the system, and see if it works ?
EDIT: Info from manual:
Quote
Clear CMOS Jumper: JBAT1
There is a CMOS RAM on board that has a power supply from external battery
to keep the system configuration data. With the CMOS RAM, the system can automatically
boot OS every time it is turned on. If you want to clear the system configuration,
use the JBAT1 (Clear CMOS Jumper ) to clear data. Follow the instructions below to
clear the data:
MSI Reminds You...
You can clear CMOS by shorting 2-3 pin while the system is off.
Then return to 1-2 pin position. Avoid clearing the CMOS while the
system is on; it will damage the mainboard.

648F Neo + MSI FX5200-T128 + P4 2.8

Hi,
having som problems with Neo 648F+ FX5200 + 2X256 DDR400 + P4 2.8Ghz CPU+ PSU 450W.
it all works fin untill i installed the P4 2.8Ghz (i had Celeron 2.8Ghz). the system works more slowly & some times when i open one aplication the PC restarts ...
Anybody have a solution for this problem?? Then just buy som new hardware!

Is this a 2.8 Northwood or a 2.8 Prescott. The board doesn't support Prescott.
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=470

[685P Neo] No Hyperthreading/Windows crashes

Lo,
A while ago i purchased:
MSI 865P (MSI-6742)
Pentium 4 Northwood 2.4G FSB 800 Stepping 12
Sapphire 9600
After having a lot of blue screens/hard locks in windows even with all fixes (ACPI, drivers, bios settings, etc..) and several windows versions.
So i switched to linux. Runs stable now... so well... not a perfect solution.. but ok...
Now, i actually enabled hyperthreading etc, but i got a message telling me Hyper-Threading is disabled.
this is because
Code: [Select]
MOV EAX,1
CPUID
then EBX>>16 (or something) gives 1 (number of logical cpu's).
Now, that would mean i have a hyperthreading cpu, but it isn't enabled. This would probably be caused by the bios not having it enabled.
Tho my mainboard IS HT Ready and my CPU is a HT one too..
Got the latest bios running (6742v12.exe/v1.2/2003-9-4), but it doesn't enable HT or shows a bios option..
I hope someone can help me with this and if someone has a potential working solution for the windows crashes, don't hestiate to post so plz :D
Thanks in advance
.

Full Specs:
MSI 865P Neo(MSI-6742)
Pentium 4 2.4 Ghz (see extended CPU info)
VData 512MB PC2700 Memory [20329/VDD8608a8a-6b]
Sapphire 9600Pro
Maxpower PL-300W PSU
IBM IC35L090AVV207-0 80GB 7200RPM
MAXTOR 6L040J2 (D740X) 40GB 7200RPM
RealTek RTL-8029
RealTek RTL-8139 (on-board)
Intel C-Media AC'97 audio (on-board)
Info
I have tested the memory with memtest86 and it gave no errors.
For the CPU, the operating system reports stepping 7, tho at the startup it says Stepping 12 ?(
Extended CPU Info:
MP Table:
# APIC ID Version State Family Model Step Flags
# 0 0x14 BSP, usable 15 2 7 0xbfebfbff
Family: 15 Model: 2 Stepping: 7 Type: 0
CPU Model: Pentium 4 Xeon (Northwood) [C1] Original OEM
Processor name string: Intel(R) Pentium(R) 4 CPU 2.40GHz
Instruction TLB: 4K, 2MB or 4MB pages, fully associative, 128 entries.
Data TLB: 4KB or 4MB pages, fully associative, 64 entries.
L1 Data cache:
Size: 8KB Sectored, 4-way associative.
line size=64 bytes.
No L3 cache
Instruction trace cache:
Size: 12K uOps 8-way associative.
L2 unified cache:
Size: 512KB Sectored, 8-way associative.
line size=64 bytes.
2405.46 MHz processor (estimate).

MSI 648F Neo

I have a Question
I just bought this Motherboard MSI Neo 648F
i would like to know the functions
i heard this one was pretty good
Thank-You
Kevin

You can check the functions listed in MSI's website.
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=470
P.S: Since you've doubled post, I'll delete away the other thread.
All the Best... :D!!!

648F NEO L - performance vs. crash

Similar Messages

Maybe you are looking for