648Max and Radeon 9700 - Im confused

I just installed a Radeon 9700 pro. I was getting a beep sequence when booting and it would go no further. I would just restart the computer and it would come up fine.
Everying appears to work fine after that but I do not like things to work any other way than perfect.
I looked into these boards and have been reading alot about this issue and so I checked my versions.
I seem to have A revision 1.0 Motherboard and a revision 1.1 Radeon 9700pro(D33011).
Should I talk to MSI and ATI about replacing them?

Quote
Originally posted by AMaskedMan
I just installed a Radeon 9700 pro. I was getting a beep sequence when booting and it would go no further. I would just restart the computer and it would come up fine.
Everying appears to work fine after that but I do not like things to work any other way than perfect.
I looked into these boards and have been reading alot about this issue and so I checked my versions.
I seem to have A revision 1.0 Motherboard and a revision 1.1 Radeon 9700pro(D33011).
Should I talk to MSI and ATI about replacing them?
i had boot problems with this combo when i first bought them. msi asked me when i purchased the MB and asked for a number on the box tht shows what month it was made. if it was made last september they had a issue with 9700 and the board and they rma''d the board and everything works fine now.
dont know if that would be your fix though but i would suggest talking to them.
other than that make sure your using bios 1.1 or 1.3 (heard 1.2 was problematic for 9700) and that your power supply is adequet.
Edit:
just saw you had rev 1.1 of the 9700. that rev has had boot issues with agp 8 MB's. so if the problem i described doesnt fit yours(not made in sept) you might talk to ati about getting a rev 1.3 or higher. i had to get the 1.3 when i was using a via agp8 board and people on Rage3d had problems with the same issues on the sis 648 boards also.

Similar Messages

RESOLUTION: GNB MAX and Radeon 9700 Crashes

I had various lock-ups, crashes and "Windows detected and recovered from a device failure" error messages with my GNB MAX motherboard and Radeon 9700 and they are now fixed.
I was able to receive a beta version of an upcoming set of drivers from ATI and they did the trick!!
Just wanted to give you all some hope.
Hang in there!

Oops, I spoke too soon. I think FastWrites is on (I remember turning it off before on previous drivers and noticing a big slow down that is not present now) but there isn't a SmartGart tab appearing in my ATI control panel any more. I checked Advanced - Options - Details and yes, 8X is on.
How can I verify that FastWrites is on without the SmartGart tab?

MSI K7T266PRO2-RU and Radeon 9700 (non-pro)

Hi!
I'm thinking of upgrading to a Radeon 9700 non-pro,
and just thought I'd check this forum to see
if there are any compatibility issues between
my K7T266PRO2-RU and Radeon 9700 (like
there were between GF4mx).
If someone has a similar setup (k7t266pro2 w. 9700PRO/non-pro)
I would like to hear of your experience with this.
I appreciate your help.

Hi,
I can't remember any problems with it, as long as you make sure the powersupply can handle it.

KT4 Ultra and Radeon 9700 Pro

Ok I have a question. So it seems there is an issue with this particular card and the KT4 Ultra. So what in the $#%@ brand and model 8x agp card did MSI use to test the 8x function of this board? I thought the 9700 pro was the only 8x card out right now? If its not why wasn't it tested by them??? I hope this will be fixed by a bios update, but not for me, for the others out there, as for me, I am taking this back and I'm getting an Epox board, I heard Asus has similair problems but Epox 8x board works. Very sad that I had to spend hours trying to figure this out and it wasn't even my error.

ATI has already stated (about 2 weeks ago) that a problem does exist with the Radeon 9700 and certain 8x AGP boards. You can RMA the board and it will either be replaced or the BIOS will be flashed at no charge to you. Go to http://www.ati.com and send them an email.

MOVED: Re: K8T Neo2 F (6702E) and Radeon 9700

This topic has been moved to Linux/Unix.
https://forum-en.msi.com/index.php?topic=127833.0

Quote
Originally posted by dondada
OK, lets clear this up. What is happening is that the computer is randomly freezing/shutting down. Now it doesnt matter what i am doing, its just random. I've done the burn-in test for about 15 hrs with no problem, but then when i stopped it, i tried to open IE, and the comp crashed, so its not a load problem. the rig always POSTs, thats not a problem. I have not run MEMTEST, but i've tried other ram, with the same problem. I've also tried different vid cards, such as a Radeon 7000, a 9600 pro, and a nVidia mx440, all of which worked flawlessly. Now in the bios, i have the AGP Fast write set to Off, the aperature set to 256mb, and the VLink 8x support is disabled (therefore set to 4x). The primary graphics adapter is set to AGP. The AGP Frequency is set to the default, and so is the voltage. ALSO, when i was talkin with MSI, then sent me an updated bios. the bios file says 3.36, but in the actual bios, it says 3.31. is this anything to worry about? I have not done driver clean, or used the Omega drivers yet, but i will do that now. Please reply if you can help or if you need more information.
1) why set fast write to off? mine is on.
2) why set the aperature so much higher than the available onboard ram on the 9700?

MEGA 180 and Radeon 9700 Pro

i was reading and people sticked in an 9800pro and it worked fine so i took a gamble and got a 9700pro
ok took me 2hrs yesterday to stick the 9700pro in the mega and i had to take the psu, heatsink and cdrw out to do so and it booted fine the 1st time... then i installed the drivers and restarted the kb wasnt working so i thought it wasnt plugged in, checked it and it was plugged in so turned off the comp and turned it back on and the monitor was blank but i can hear it like loading so i reset the cmos and all i hear was beepings sound when i turned it on and nothing on the screen.... so turned it off again and waited a while and turn it back on and all i get is a black screen..... took out the 9700 pro and went back to onboard graphics and everything works fine again.... so i guess there is no way that i can get the 9700 pro to work on this right?
any help is apperciated thanks in advanced

Quote from: Dr Stu on 24-December-05, 20:31:08
where did you get the 9700pro from?
these are no longer manufactured, so i guess you have bought this "used" from somewhere (ebay perhaps?)
try it in another computer system, and see if it does the same in there. if it does then you have bought a duff card
yes i got it off someone used and no there is nothing wrong with it cuz i just tired it on my bro's desktop (p4 1.8ghz) and it works fine... and i just noticed that his psu is 250watts also and it works fine so then shouldnt it run on the mega also if it works on his comp with 250watts psu? or i guess its just differeent psu's??

KT4 and Radeon 9700 Pro......

Ok I found that all my 3d games lock up with any driver version, with all the via 4 in 1, trust me there is nothing I haven't checked. Another thing I found is the card works great on my other pc which is not an 8x AGP motherboard. So I hear everywhere on many other forums, "turn it to 4x agp on your board and try", oh boy I sure would if that section WASN'T GREYED OUT AT AUTO!!!!!!!!!!! Please MSI, what is the point of not letting us lower the AGP speed, especially if people are reporting problems with this card and your motherboards. I figured one time, just once, I would stray from Asus and Epox and buy an MSI since it advertised 8X agp ( god knows if they tested a real 8x agp card with the board ), this has been a major mistake, and since I have to live with it, all I ask is that you put out a bios update so we can lower the agp speed. thanks

4esth,
There is no way to allow the user to manually set AGP4x on an AGP8x card on MSI KT4 Ultra.
Did you come across any other VIA KT400 boards that allow user to manually set AGP4x on an AGP8x card, please let us know. Until now I haven't found one. Or else it would serve as a good point to request MSI. But I doubt there is any at the moment.
Other than that, I would suggest you to check for the heatsink condition on the card itself. Apply some Arctic Silver III if you have, lap the core if you dare as some core GPU is not FLAT and does not have good contact with the heatsink.

MSI KT400 and RADEON 9700 PRO

I'm having many problems with this combination: some games don't work.
I've read there are problems with agp 8x, any advice?
I can't play:
mechwarrior mercenaries
arx fatalis
platoon
thanx!

Since the KT400 is a VIA Chipset based motherboard and this is an Nvidia/AMD/SiS SocketA forum I am moving it to the VIA based forum.
Perhaps you can elaborate on exact problems and provide a complete hardware listing, including your power supply's combined wattage across the +5v and +3v rails.

KT4 Ultra +Radeon 9700 Pro Trouble Free !

After a few months of relatively trouble free gaming with KT4 Ultra and Radeon 9700 Pro, I was shocked to find recently that my PC began to crash after only a few minutes of gameplay. 8o
Believing that a reinstall of all the relavent drivers would cure the problem, I set about trawling through the latest advice on what works / doesnt work. This I have to say was a minefield of anecdotes, mainly bad ones - as most of you guys are probably aware !
After installing drivers as 'best' I could, the problem remained the same.
It would appear that to ask for a complete list of recommended drivers is futile, since there is little correlation between reported 'fixes'. There is always someone reporting that the latest versions are causing problems.
For the moment, this tale has a happy ending cos I found that the system is getting too hot (after some months !), so with the side panel off and a 12 inch desk fan blowing inside I managed a 4 hour session with now problems. )
The purpose of the post is to highlight the disturbing fragility of these systems (which i'm sure many of you have first hand experince), both in hardware and software and to share my disbelief at the apparent lack of sustained testing that these boards undergo.
Looks like a better cooling system is in order

It's unfortunate that most of the new hardware seems to pump out heat. The ATI 9700 pro use about 100W of power on it's own. The whole system puts out enough heat to warm a small room.
I have noticed that the heatsink on the ATI card gets very hot, even though it has a fairly serious fan on it (the fan on my Sapphire card is a lot like a blue orb).
I am wondering if a lot of problems with these setups are thermal. I have the KT4 Ultra and ATI 9700 pro and it has not given problems at all.
I have (from past experience) installed plenty of cooling in my case (a full tower, that helps too). I find that the cooler everything as kept, the less problems there are.
I think that at some stage in the near future there will have to be a change somewhere. Either in heat output (reduction in power use) or cooling.

Catalyst and Mobile Radeon 9700

Hello, I'm wondering if anybody has success getting the Mobile Radeon 9700 working with the catalyst drivers.
For some reason, lspci says I have a Radeon 9600, although it's supposed to be a Radeon 9700
lspci:
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
xorg.conf with input devices removed:
Section "ServerLayout"
Identifier "Default Layout"
Screen "aticonfig-Screen[0]"
InputDevice "TouchPad" "CorePointer"
InputDevice "sniper2100" "SendCoreEvents"
InputDevice "microsoftWireless" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/local/share/fonts"
EndSection
Section "Module"
Load "record"
Load "extmod"
Load "ddc"
Load "dbe"
Load "dri"
Load "glx"
Load "xtrap"
Load "freetype"
Load "bitmap"
Load "type1"
Load "synaptics"
EndSection
Section "ServerFlags"
Option "Xinerama" "false"
Option "AIGLX" "on"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "DynamicClocks" "on"
#Option "DRI" "true"
#Option "XAANoOffscreenPixmaps" "true"
Option "KernelModuleParm" "agplock=0"
Option "UseInternalAGPGART" "no" #7-12-2006
Option "NoTV" "yes"
Option "no_accel" "no"
Option "no_dri" "no"
Screen 0
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
I can get everything working with OSS drivers, and somewhat working with fglrx. `glxinfo` tells me DRI is working. However, when running `glxgears`, weird things happen. The gears dont' seem to be turning, but I get about 2500~ FPS. Then, if I were to try fgl_glxgears, everything dies. The machine locks up, my only option being a magic sysreq reboot. Is this simply a xorg.conf configuration problem?
Oddly, I recently tried out the fglrx drivers again by using aticonfig to generate a xorg.conf, and now it seems like I startup in multimonitor mode, and I don't seem to be able to stop that from happening.
If anybody could give me some sample xorg.conf to test out, it would be awesome.
My laptop is an obscure ABS Mayhem G2.
Any other information required?
Thanks ahead of time.

Sorry, I forgot to post my xorg.conf.
For the catalyst drivers this was the best one for me:
Section "Device"
Identifier "Card1"
Driver "fglrx"
Option "XAANoOffscreenPixmaps" "on"
Option "VideoOverlay" "off"
Option "TexturedVideo" "on"
Option "Textured2D" "on"
Option "TexturedXrender" "off"
Option "OpenGLOverlay" "off"
Option "UseFastTLS" "1"
Option "BlockSignalsOnLock" "on"
Option "DesktopSetup" "single"
Option "DRI" "true"
Option "TVOverscan" "on"
EndSection
and for the open drivers:
Section "Device"
Option "DynamicClocks" "True"
Identifier "Card0"
Driver "radeon"
VendorName "All"
BoardName "All"
Option "DynamicClocks" "True"
Option "ColorTiling" "on"
Option "AGPFastWrite" "False"
Option "XAANoOffscreenPixmaps" "True"
Option "BackingStore" "True"
Option "EnablePageFlip" "On"
Option "TVStandard" "pal"
EndSection

K7N2 Delta-ILSR - Radeon 9700 pro - no power.

K7N2 Delta - ILSR (6570)
AMD Athlon XP2800+ (Barton)
nVidia GeForce III 64mb
1GB Samsung PC3200 400MHz DDR Original [2x512MB] [Checked nVidia site = Compatible]
40gb + 80gb Hard Drives
Sony DVD burner
500wat psu 3.3 - 28 / 5 - 40 / 12 - 17
3 extra fans
2 Cathodes
1 EL Cable
Windows XP pro SP2. [all drivers and Bios are upto date]
Everything works 100%
Sapphire Radeon 9700 Pro... No fans, No lights No DVD and 1 Hard Drive.
Power on... Continuous short BEEPS... Monitor comes on with the message "NO POWER CONNECTED TO RADEON"
The Radeon mostly worked for over a year, [trouble booting cold] now it does'nt. [not with my MSI]
The card works with my old board, LEX BN790E via KT266A, 512mb, AMD XP1700+ and all extras.
I have been building my own P.C's for years. Starting with a 386sx, a huge 2mg of ram and Windows 3.11
Everything is connected as it should be.

Quote
The Radeon mostly worked for over a year, [trouble booting cold] now it does'nt. [not with my MSI]
The card works with my old board, LEX BN790E via KT266A, 512mb, AMD XP1700+ and all extras.
that is suggesting to me either your PSU is failing, or it is a Poor PSU with over-optimistic amp ratings (eg Q-Tec). it will all appear to work fine on your older board, as that has lower power requirements, have a look in my sticky Is your problem caused by your PSU? for more info and advice.
Quote
Could people please read the entire post and NOT just the title.
that was a bit rude. people try to help by asking questions and giving suggestions. making responses like that is more likely to make people ignore this topic. Please read and comply with the Forum Rules.

[Solved] xf86-video-ati driver and [Radeon Mobility 7500] help

I have an thinkpad T42 laptop (video card is ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]) with openbox and slim and I instaled xf86-video-ati. My problem is that minimizing and maximizing are very slow, lxterminal decoration bar disapear..... I also tried to install xf86-video-ati-git without any improuvements.
this is my xorg.conf:
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "SynapticsTouchpad" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
Option "AIGLX" "true
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
# FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
# FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/share/fonts/ttf/western"
# FontPath "/usr/share/fonts/ttf/decoratives"
# FontPath "/usr/share/fonts/truetype"
# FontPath "/usr/share/fonts/truetype/openoffice"
# FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
# FontPath "/usr/share/fonts/latex-ttf-fonts"
# FontPath "/usr/share/fonts/defoma/CID"
# FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
Load "dbe"
Load "glx"
Load "dri2"
Load "dri"
Load "synaptics"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "CorePointer"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "on"
Option "YAxisMapping" "4 5"
Option "XAxisMapping" "6 7"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "SynapticsTouchpad"
Driver "synaptics"
Option "AlwaysCore" "true" # send events to CorePointer
Option "VertEdgeScroll" "true" # enable vertical scroll zone
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
EndSection
Section "Device"
Identifier "Card0"
Boardname "ATI Radeon"
Busid "PCI:1:0:0"
Driver "radeon"
Screen 0
Vendorname "ATI"
Option "MergedFB" "off"
Option "AccelMethod" "EXA"
Option "EXANoComposite" "false"
Option "FBTexPercent" "50"
Option "MigrationHeuristic" "greedy"
Option "DRI" "true"
Option "GARTSize" "1536"
Option "AGPMode" "4"
Option "Colortiling" "On"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Last edited by botzoboy (2010-05-29 07:39:30)

theapodan
this is my Xorg.0.log:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux arch 2.6.33-ARCH #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010 i686
Kernel command line: root=/dev/disk/by-uuid/7e750225-da5a-470f-a024-af37495f11d5 ro
Build Date: 01 April 2010 05:35:33PM
Current version of pixman: 0.18.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 29 09:20:42 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "SynapticsTouchpad"
(**) |-->Input Device "Keyboard0"
(**) Option "AIGLX" "true"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 1002:4c57:1014:0530 ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] rev 0, Mem @ 0xe0000000/134217728, 0xc0100000/65536, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 6.12.192
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 1.5.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4290,
CYPRESS, ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450,
CEDAR
(II) Primary Device is: PCI 01@00:00:0
(II) [KMS] Kernel modesetting enabled.
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "ColorTiling" "On"
(**) RADEON(0): Option "AccelMethod" "EXA"
(**) RADEON(0): Option "DRI" "true"
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon Mobility M7 LW (AGP)" (ChipID = 0x4c57)
(II) RADEON(0): AGP card detected
(II) RADEON(0): KMS Color Tiling: enabled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using user preference for initial modes
(II) RADEON(0): Output LVDS using initial mode 1024x768
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) RADEON(0): mem size init: gart size :fdff000 vram size: s:2000000 visible:1f00000
(II) RADEON(0): EXA: Driver will not allow EXA pixmaps in VRAM
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): [DRI2] Setup complete
(II) RADEON(0): Front buffer size: 3072K
(II) RADEON(0): VRAM usage limit set to 25804K
(==) RADEON(0): Backing store disabled
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled for R100 type cards.
(II) RADEON(0): Setting EXA maxPitchBytes
(**) RADEON(0): Option "MigrationHeuristic" "greedy"
(**) RADEON(0): Option "EXANoComposite" "false"
(II) EXA(0): Driver allocated offscreen pixmaps
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Set up textured video
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) RADEON(0): Option "MergedFB" is not used
(WW) RADEON(0): Option "FBTexPercent" is not used
(WW) RADEON(0): Option "GARTSize" is not used
(WW) RADEON(0): Option "AGPMode" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/radeon_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 270 x 203
(**) Option "Protocol" "ExplorerPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "on"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) acceleration profile 0
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) Synaptics touchpad driver version 1.2.1
(--) SynapticsTouchpad auto-dev sets device to /dev/input/event7
(**) Option "Device" "/dev/input/event7"
(II) SynapticsTouchpad: x-axis range 1472 - 5472
(II) SynapticsTouchpad: y-axis range 1408 - 4448
(II) SynapticsTouchpad: pressure range 0 - 255
(II) SynapticsTouchpad: finger width range 0 - 0
(II) SynapticsTouchpad: buttons: left right double triple
(**) Option "VertEdgeScroll" "true"
(--) SynapticsTouchpad: touchpad found
(**) Option "AlwaysCore" "true"
(**) Option "SendCoreEvents"
(**) SynapticsTouchpad: always reports core events
(II) XINPUT: Adding extended input device "SynapticsTouchpad" (type: TOUCHPAD)
(**) SynapticsTouchpad: (accel) keeping acceleration scheme 1
(**) SynapticsTouchpad: (accel) acceleration profile 0
(--) SynapticsTouchpad: touchpad found
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "XkbRules" "base"
(**) Keyboard0: XkbRules: "base"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device ThinkPad Extra Buttons
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Sleep Button
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Video Bus
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Power Button
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) Mouse0: ps2EnableDataReporting: succeeded
(--) SynapticsTouchpad: touchpad found

Computer shuts down with Radeon 9700

Hi all.
On most motherboards, the HALT ON ERROR section would allow you to specify what errors would cause your computer to shutdown if a system error occured.
My ATI RADEON 9700 is causing me a lot of grief. It's actually my second ATI 9700 Pro and my second KT4V mobo to fix this. The cards' acting up again after 6 months of error-free play, until today.
What I find annoying is that HALT section 99.9% of bios has is missing from the KT4V bios setup. I want to halt on NO errors (you know, where you can halt on: all but keyboard, etc). Why is this missing from the BIOS settings? Is there something I can tweak to resolve this?
The 9700 Pro video card I have rocks, it's just too bad that it doesn't like this motherboard.
Specs:
KT4V Mobo with 350W EVERMAX powersupply
Athlon 2500+ XP CPU
1.0Gb Micron DDR 2700
XP Pro (fully updated)
Drivers fully updated with MSI Live Update 3

try other graphics board to your system, if it works, then an issue with compatibility with your board exist, or try checking your power supply if it can really handle new types of graphic boards, if not buy a more powerful PSU with atleast 350watts up... or better yet update to newer bios version for your mobo or if anything fails,... pray!
good day..!

MSI KT4 ULTRA-BFISR + Ati Radeon 9700 pro = not good??

Hello everybody!
First of all, i youst have to say that i think MSI have the best motherboards....
Here's the problem (i haven't buyed anything yet!):
I am going to buy MSI KT4 ULTRA-BFISR and ATI Radeon 9700 Pro, but i have read many places that Radeon aint working with MSI KT4-based cards! Im am going to buy an 520W Power (i aint so good in english so i hope you now what i write :D )
I am also going to buy 2 x Cosair pc3500 xms ram... Is this one working with the motherboard by the way?
But my question is: Will the Ati Radeon 9700 pro work with this card? (i must remember to buy the 1.3 version!) I am gonna get my Radeon 9700 pro from USA, how can i now when i order that is an 1.3 card?
Thank you for answering! :]

I think also that even there is two drivers, that is not a reaseon why it isn't work. One time I install only standard VGA drivers, but result was that I got two standard VGA driver. 8o
First time I try without VIA drivers, then with 4.42 and 4.43 VIA drivers. Result was almost same all the time, it always crash when Nature test start, but this exist also to older mobo (Abit KT7A-RAID). Problem exits few games they lock up or stuttering. Ati demos works fine, but one time that car demo stuttering a lot, but I transfer data at same, so I'm not sure what was reason.
This moment I don't have possibilities to try Hyperion 4.45 drivers or something else, because it's my friend computer.
MSI KT4V 6712 (Bios 1.0)
AMD Athlon 1.2
512 MB DDR 333 RAM
SoundBlaster Live
ATI Radeon 9700 Pro (Club3D)
Power 300W
Realtek Ethernet card
Samsung 40GB harddrive
Samsung DVD
VIA 4.42 and 4.43
WIN98

MSI KT6 Delta LSR and Radeon 9600 XT 256mb x8 AGP Problem

hi,
Ive just brought a Radeon 9600 XT 256mb and it wont run at x8 agp at all, games lockup as soon as i start them, within 5 mins all text on display corrupts and i get a message saying the gpu recover has set the gpu to default settings.
I cant change anything in BIOS to set it to x4 agp as its not selectable and says AUTO only for agp speed setting.
Only way to alter is goto smartgart in ATI drivers and select x 4 agp if u get in before text corrupts :(
Ive managed to get it stable at x4 agp now through smartgart.
BUT it says on box and in manual this motherboard supports agp x8 but why dont it run it ???
i havent a clue whats up with it.

hi,
Ive got it running stable in x4 agp and found a post on ATI website about some motherboards not working proberly at x8 agp with Radeon 9600 series graphics cards.
http://mirror.ati.com/support/infobase/4219.html
Got nice scores in 3dmark 2001 and 3dmark 2003
But what confuses me is Quake 3 demo that didnt change at all over my old card and radeon 9000 pro i tried once too.
I got
174fps with Radeon 9100
175fps with Radeon 9000 pro
173fps with Radeon 9600 XT 256mb
Thats on Athlon xp 1700
strange or what ?
oh well its a old demo anyway but main thing is big increase in 3dmark 2001 by over 2000 marks

648Max and Radeon 9700 - Im confused

Similar Messages

Maybe you are looking for