648MAX - cant load scsi drivers

just bought the MS 6585 and i cant load in the drivers for my LSI DC-390 Tekram scsi card.
Running XP Pro with a intel 2.26 processor.
Have flashed the card with new flash and works fine in other machine.
any help would be great

sand_man wrote:You might need to remove the whole folder and reinstall oss (it will run the install script again) I think the folder is /usr/lib/oss/
I do it, but a sound is beginning to ring from left column. For testing I restart computer to windows and there're sound is ringing from couple columns and not from once only.
I restarted Linux and sound was played already from all two columns. After sometimes a bug was repeated. Generally I use winxp and never watch that "bug" there.
Last edited by veranyon (2010-01-11 16:38:30)

Similar Messages

Cant load printer software

i have a epson cx 4600, in pass printer worked fine, lately i was have a few glitches with os 10.4.9, so i re installed system soft ware back to 10.3.9 ever since i cant load printer i install software from original dick it installs fine , but when i go to set up new printer through printer utility the utility goes to open then closes. I tried this several times i even re-re-installed sytem software but still nothing. i even downloaded printer utility program that was posted on this forum but nothing. i need help. my next option is to get a new printer which i really dont want to do.

Hi Myron!
Try this procedure.
* Download the most current driver from Epson Stylus CX4600, Drivers & Downloads. Printer Driver v2.0cA for Macintosh OS X (v10.2.x - 10.3.x).
* Before moving the folder & files listed below, to a Temporary Epson Trash Folder, that you should create on the Desktop, open Printer Setup Utility, and delete the CX4600.
* Quit Printer Setup Utility
* If present, move the files (Posted in CAPITALIZED Italics), to the newly created Temporary Epson Trash Folder
HD > Applications >
EPSON PRINTER UTILITY (Alias)
HD > Users > Your Home > Library > Preferences >
COM.EPSON.IJPRINTER.UTILITY.PLIST
COM.APPLE.PRINT.CUSTOMPRESETS.PLIST
COM.APPLE.PRINT.PRINTCENTER.PLIST
COM.APPLE.PRINT.PRINTERPROXY.INTERNAL_MODEM.PLIST
COM.APPLE.PRINT.PRINTINGPREFS.PLIST
HD > Library > Printers >
EPSON (Folder) Only move this folder if you have no other
Epson products
I also had a Epson OS X booklet.pdf, that I had saved in my Documents folder. You will get a new one. After the installation, I replaced it. You may not have saved your original one. It's no big deal, there's really not much in it, In fact I don't remember the last time I opened it!
* Quit ALL running Applications
* Repair Permissions using Disk Utility in the Utilities folder
* Dig out your Epson CX4600 Start Here instruction quick sheet, for reference
* Unplug the USB cable from the Mac & then from the CX4600
* Re-attach the USB cable to the CX4600 & then to the Mac
* Turn on your CX4600
* Open the epson11111 folder
* Double-click the .dmg file to create a disk image with the product name on your desktop
* Open the disk image
* Follow the prompts & instructions
* When the Vise installer opens in a window, double click it to start the install
* When the installation is complete, turn off the printer & restart your Mac.
* Repair Permisions again
* Turn on the CX4600
* Open Printer Setup Utility
* You have no printers available will appear. Click Add
* Select Epson USB in the contextual menu
* Click on CX4600 to highlight
* Add Page Setup: select All, from the contextual menu
* Click Add
* Quit Printer Setup Utility
The images that are left on the Desktop, can be trashed, unless you prefer to keep the installer.
Good Luck!
ali b

HP all in one ms237 cant get wireless drivers to work

Hi i have a HP all in one PC, ive had this PC for a very long time, we upgraded to windows 8 and i dont remember how but i did manage to get wireless drivers on it at one point. the PC's hard drive went out and so i bought a new one and re-installed windows 8 (64 bit) onto it and now i cant get wireless drivers to get installed on it. I tried running the drivers with windows 7 compatability but no dice. I also tried different versions of the driver and still no luck, device manager will see the wireless card but says its not working properly (driver issue) the weird thing is that when i uninstall the drivers for it i can see the adapter in adpater settings, however when i install newer drivers and it goes back to being non existent lol. Any ideas?

Hello @rapid3642,
I understand that you are having issues getting your wireless to work on your HP Pavilion All-in-One MS237 Desktop PC running Windows 8. As you probably have already figured out there are no Windows 8 drivers for your computer. I can see why you would have issues installing Windows 7 drivers on a Windows 8 computer. What you probably did initially was upgrade your Windows 7 to Windows 8 with the driver already installed. Unlike a new Windows 8 installation where you need to install the drivers an upgrade will already have drivers installed and the operating system is simply replacing what is needed without having to go through the installation process.
I would recommend that you either install your original Windows 7 and then upgrade to Windows 8 or you may want to look at replacing the 802.11 b/g/n PCI express wireless half-length mini card with one that is compatible with Windows 8.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Cant Load Win 7 64 after rebuild NF980-G65

Hi
I have just bought an NF980-G65 mob., with an AMD Phenom II X4 955 (Deneb 4c)
3.2 GHz, DDR3-1333, 2 MB L2, 6 MB. I also bought the G-skill 1600 ram, I was a bit put of when it came as it was for an Intel pro,
I have it set up with two Nvidia 7800gt G.cards. in SLI
I installed a new hard drive W.Dig. 650gb black. when I tried loading win7 64 i kept getting a blue screen with various faults on it.
It would work as far as the grey line "loading windows" and even the logo sometimes but would then crash.
The amazing thing is that i put my old hardrive back in and it booted up as 32bit win7 and loaded the drivers.
this seemed to work until i tried to install a game and it crashed again all i saw was a quick message about "memory"
needles to say i have returned the g-skill ram as that was the only thing not in the mob recommended ram.
silly boy bought it for it's latency didn't read the small print.
I am with any ram now and I'm having difficulty finding somewhere that has a stock of recommended ram i.e.
Patriot PGS34G1600LLKA, GeIL GV34GB1600C8DC, or lots of very expensive Kingston. £100 is about my limit.
Any way that said, do you think i had another problem?
the mem i bought was GSKill 4GB DDR3 Dual Channel Memory Kit (2x2GB) PC3-12800 1600MHz (7-8-7-24)
Model Number: F3-12800CL7D-4GBRM
I hope someone can help
thank you

Blue screen like that sounds like RAM, or overclocking, or overheating, I guess you are not overclocking.
I'm using memory modules "specifically designed for intel P55 chipset" (according to OCZ) on my AMD PC. The only thing is that I had to set up the timings manually. I was able to set up tighter timings because I'm running slower than rated speeds (at 1333 MHz instead of 1600 MHz), no problems whatsoever. But I'm not saying that the GSkill RAM that you bought would definitely work though, incompatibility problem is still possible. I bought my RAM at a local store, so its easy to return it if it didn't work
So, apart from incompatibility, either the timings or speeds were not correct, or you had some defective RAM modules. Need to run memtest on them to find out. Also, Phenom II normally accept maximum RAM clockspeed of 1333 MHz, if you set up the RAM to go 1600 MHz that is considered overclocking and may not be stable.
This is the favorite line in this forum: Check your power supply! A weak power supply may cause problem as well.
Also try using single card before you do SLI when installing.
Good luck!

Snow leopard 10.6.8 wifi connected, cant load webpages

hi!
just yesterday my computer showed this problem with the internet. as the title says, it is connected to the wifi network (as it has always been) but i face the following problems:
i cant load new webpaged in google chrome and firefox (which are the ones that I actually use)
i can load webpsged that were already saved as bookmarks.
i can load webpages in safari
my icon for dropbox shows a red cross icon
utorrent works just fine
outlook (the software) get's my new emails
what i tried to solve it:
checked that my wifi networks work perfectly fine with other devices in the house
restart computer
changed DNS to one that was suggested in another thread in this discussions site
resetting NVRAM/PRAM
checked that it is updated
so, i read that some people had similar problems with the new 10.8.2 for mountain lion, or sth like that... but in my case i have snow leopard so i don't think thst's the problem

Hi, this has worked for a few...
Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

How to restore Mac OS 9 SCSI drivers?

Anyone here know a good way to restore the Mac OS 9 scsi drivers after you do something that messes them up?
I've been trying to get Fedora (Linux) to boot on my old tangerine iBook. One problem I have is that I want to be able to multi-boot with Mac OS 9, but setting up a partition for Linux always kills my ability to boot Mac OS 9. The volume and contents are there and in good condition, I can start classic mode in Mac OS X with no problem, just can't actually boot Mac OS 9.
I was once able, by playing some rather strange games, to re-install the Mac OS 9 drivers after this occurred, but I'm having a hard time remembering how. Anyone here know how?

How are you creating these partitions in the first place? OS 9 had a wide variety of peculiar requirements regarding partition maps and wrapper volumes which I wouldn't expect any Linux distribution to know about, but Disk Utility should still know the rules.
http://developer.apple.com/technotes/tn/tn1189.html#ChainingDriversAndPatchParti tions
http://developer.apple.com/technotes/tn/tn1189.html#HowTheROMLoadsDiskDrivers
http://developer.apple.com/technotes/tn/tn1189.html#SecretsOfThePartitionMap

Facebook cant load news feed and cant search at the web browser

Facebook in my z10 cant access my messages,my profile and cant load news feed. When i tried to use my Facebook using my web browser it seems it's not loading. I tried to reboot and reset my wifi but still the same. Pls some one help me version 10.2

I am having the same problem...

Can't load mac drivers

When I try to load mac drivers I get the following message" Bootcamp X64 is unsupported on this computer model." Windows installed properly except for this problem. I could run Microsoft Office but I need the Mac drivers to run video applications I presume.
I purchased Windows Home 64bit and was told it would work on my computer. Should have I gone for the 32bit version?
My computer is two year old IMac with following specs: 2.66 GHz Intel Core 2 Duo, 2 GB 1067 MHzDDR3, came with Leopard but I updated to Snow Leopard version 10.6.7 Can someone help me with this?
Thanks.

NA Smith wrote:
This blog looks promising for your issue: http://michael.anastasiou.me/index.php?option=com_content&view=article&id=22:qbo ot-camp-x64-is-unsupported-on-this-computer-modelq-solution&catid=7:how-to&lang = en
Awesome answer.
Rick

I purchased two movies on itunes and my ipad cant load them on my ipad

I pruchased two movies on itunes and for some odd reason i cant load them on my ipad...I have the latest versions of Ios6 and the latest itunes , but the rest of my older movies on itunes i can still load(remove and reload on the ipad). please help!!

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
 Cheers, Tom

Hi i've just signed up for lightroom and when i go into the develop screen i get a blue screen with a cross through it and it says cant load picture. any idea how to get around this?

hi i've just signed up for lightroom and when i go into the develop screen i get a blue screen with a cross through it and it says cant load picture. any idea how to get around this?

I'm having same problem in develop module which is laggy as hell compared to LR5.8
Library module is fine but develop module is slow as hell....5 seconds to make ANY adjustment.

Why is XP COM port complaining it cant load the driver (Error31)

Uninstallation of all NI software and reinstallation of the V1.6 upgrade results in COM3 and COM4 visible in XP Device Manager at the usual addresses and sharing IRQ 7 with an ! over them.
The first port complains "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)". The second port complains "Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)"
Using the NI software to test the ports the software and hardware are ticked off but COM3 and COM4 are not shown ... help!!!
Attachments:
NIBadComPorts.bmp ‏862 KB

Try right-clicking on both devices in the Windows Device Manager and select uninstall. Then open Measurment and Automation Explorer (MAX) and go-to Tools->NI-Serial-> Recover Unused Serial Ports. Hopefully, this will get your system back to a safe state. Then, just reboot your computer.
I hope this helps out.
-JoshuaP

HP Premium C410A Cannot load printer drivers eith from disc or download

HI, i have moved the printer to another computer and on this computer (Windows 7 64 bit) i cannot load the drivers from either disc or online. when going through the install procedure it gets to checking for updates, downloading updates and as soon as it starts installing updates it just custs out of the whole installation with no message or another - the whoel installation just disappears.
i have disabnles the anti virus, tried online down loading drivers but it will not load at all;.
Internet connection is a little slow but otherwise the whole machine seems to be in working order including printer.
look forward to your replies.
thanks
GB
This question was solved.
View Solution.

Hi,
Launch the installation once again and follow the steps till the licence agreement.
Clcik the 2nd lnk (Internet Connection Usage) and select No, Thanks for both of the questions.
Confirm the changes, accept the license agreement and follow the installation.
May you see any difference?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I have installed windows 7 on my MBP but cant get the drivers

i have installed windows 7 home premium on my MBP running mountain lion from the windows official disc that came with a Dell lappy but i cant download the drivers , when i go to boot camp and try downloading drivers , it shows network error.
the function keys are not working as well i cant right click using trackpad
plz help

Sharya wrote:
i downloaded parallels and when i run windows using parallels all drivers work perfectly
every thing is so amazing
The divers work in Parallels because Parallels is creating drivers for virtual hardware. Parallels is not using your computer's hardware it is creating virtual hardware. There still are no Windows 8 Bootcamp drivers. Bootcamp uses your computer's actual hardware.

Grappler 930U SCSI Drivers Etc.

I have an Orange Micro Grappler 930U SCSI, that stopped working after I updated to OSX awhile ago. I am currently running OSX 10.4 and I was wondering if there was a way I could get the Grappler SCSI card working again?
I did a web search but all the links were two or three years old and dead as is the company Orange Micro.
Any suggestions?

Unfortunately OrangeMicro's driver knowledge disappeared with the company. Sell the card to someone who still uses an older operating system that works with the card.
Atto drivers are the only SCSI drivers I'm familiar with that are compatible with 10.4:
http://members.driverguide.com/driver/detail.php?driverid=801541

Cant load the airport express with 802.11n

today i just got my new airport express with draft n. but my router can't load the config anymore after i uploading my setting ( change to N with 5 GB ). i've tried all of methods that the manual included. I think i need to exchange the new one. i just bought it yesterday.
i wanna know that would apple store give me refurbished product to me ????

today i got a replacement of AE with 802.11n. the same problem come up. Cant load the configuration. how on earth can i change the setting of my AE? this is my second times, my serial number is 6F8111XXXXX. Please apple fix it.
***

648MAX - cant load scsi drivers

Similar Messages

Maybe you are looking for