64bit Oracle client
Hello,
I installed the 64bit Oracle client on 64bit XP.
And then I want to create an ODBC Datadource (DSN), but I can't see the Oracle ODBC drivers in the ODBC Data source Administrator.
Should I install the 32bit client instead?
Regards,
Kerr
Hi,
Are you invoking the odbc administrator directly? Or is the app doing it?
64 bit DSNs can be created in the 64 bit ODBC admin at c:\windows\system32\odbcad32.exe
32 bit DSNs can be created in the 32 bit ODBC admin at c:\windows\syswow64\odbcad32.exe
32 bit apps need 32 bit client/odbc, 64 bit apps need 64 bit client/odbc.
Hope it helps,
Greg
Similar Messages
-
Error in installing Oracle client 11g on Windows 2008 R2 (64bit) XenApp 6
I am trying to install "win64_11gR2_client.zip" Oracle 11g Client 64bit on Windows 2008 R2 that has been clamped and restricted by our security department. Details of the clamp:
http://support.microsoft.com/kb/885409
The Windows 2008 R2 server is running on CITRIX XenApp 6.
When we try to install the client on a normal version of Windows 2008 R2 without the Clamp, the installation follows through and successfully. However, when we try to install the 11g Client on the Clamped Windows 2008 R2, we get the error below:
[INS-08802] Unable to instantiate the View class referred by View ID 'SummaryUI'
This indicates the primary issue is with the clamp. My issue now is knowing what exactly is causing the error. what restrictions should I enable from the clamp in order to get the installation working?
Here is the error log:
Error log:
INFO: Loading data from: jar:file:/C:/Users/setupc/AppData/Local/Temp/OraInstall2011-10-10_04-13-35PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beanstore from jar:file:/C:/Users/setupc/AppData/Local/Temp/OraInstall2011-10-10_04-13-35PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/C:/Users/setupc/AppData/Local/Temp/OraInstall2011-10-10_04-13-35PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
INFO: Completed verification of target environment.
INFO: Inventory exists: false
INFO: Registering setup bean
INFO: Building Flow
INFO: Building the flow graph
INFO: Loaded state init
INFO: Loaded state clientInstallType
INFO: Loaded state productLanguage
INFO: Loaded state getOracleHome
INFO: Loaded state prereqExecutionDecider
INFO: Loaded state checkPrereqs
INFO: Loaded state postPrereqs
INFO: Loaded state summary
INFO: Loaded state clientCustomInstall
INFO: Loaded state schedulerAgent
INFO: Loaded state mtsDialog
INFO: Loaded state setup
INFO: Loaded state finish
INFO: Linking states
INFO: State[checkPrereqs]: route=success; to=summary
INFO: State[clientCustomInstall]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[clientCustomInstall]: route=TO_ORAMTS; to=mtsDialog
INFO: State[clientCustomInstall]: route=TO_SCHEDULERAGENT; to=schedulerAgent
INFO: State[clientInstallType]: route=ic_no; to=productLanguage
INFO: State[clientInstallType]: route=ic_yes; to=getOracleHome
INFO: State[getOracleHome]: route=INVENTORY_NO; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_NO_CUSTOM_YES; to=clientCustomInstall
INFO: State[getOracleHome]: route=INVENTORY_YES; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_YES_CUSTOM_YES; to=clientCustomInstall
INFO: State[init]: route=success; to=clientInstallType
INFO: State[mtsDialog]: route=success; to=prereqExecutionDecider
INFO: State[postPrereqs]: route=CUSTOM; to=clientCustomInstall
INFO: State[postPrereqs]: route=NON_CUSTOM; to=summary
INFO: State[prereqExecutionDecider]: route=executeprereqs; to=checkPrereqs
INFO: State[prereqExecutionDecider]: route=ignoreprereqs; to=summary
INFO: State[productLanguage]: route=productlanguage_yes; to=getOracleHome
INFO: State[schedulerAgent]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[schedulerAgent]: route=TO_ORAMTS; to=mtsDialog
INFO: State[setup]: route=success; to=finish
INFO: State[summary]: route=success; to=setup
INFO: Successfully built the flow
INFO: Opening bean stores from which the beans can be loaded
INFO: Loading beanstore from a given input stream
INFO: Translating external format into raw format
INFO: Registering the flow data beans
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
INFO: [INS-07001] Value for property 'UNIX_GROUP_NAME' not found in the bean store.
INFO: [INS-07001] Value for property 'INVENTORY_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'SELECTED_LANGUAGES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_RESPONSE_FILE' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_USERNAME' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_PASSWORD' not found in the bean store.
INFO: [INS-07001] Value for property 'DECLINE_SECURITY_UPDATES' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_HOST' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PORT' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_USER' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PWD' not found in the bean store.
INFO: [INS-07001] Value for property 'SECURITY_UPDATES_VIA_MYORACLESUPPORT' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_FAILURES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_CONFIGURATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOSTNAME' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
WARNING: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
WARNING: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
WARNING: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: [INS-07001] Value for property 'OCMSettings' not found in the bean store.
INFO: Set value for bean ClientSetupBean
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: Failed to load bean oracle.install.ivw.client.bean.ClientInstallSettings. Reason: [INS-07001] Value for property 'ClientInstallSettings' not found in the bean store.
INFO: Closing bean stores from which the beans can be loaded
INFO: Registering the flow views
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.PrereqGUI added to View Type Registry with the key as [PrereqUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SummaryGUI added to View Type Registry with the key as [SummaryUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SetupGUI added to View Type Registry with the key as [SetupUI]
INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
INFO: oracle.install.ivw.common.view.ProductLanguageGUI added to View Type Registry with the key as [ProductLanguageUI]
INFO: Adding View[type: oracle.install.ivw.client.view.CustomInstallGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.CustomInstallGUI added to View Type Registry with the key as [CustomInstallUI]
INFO: Adding View[type: oracle.install.ivw.client.view.SchedulerAgentGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.SchedulerAgentGUI added to View Type Registry with the key as [SchedulerAgentUI]
INFO: Adding View[type: oracle.install.ivw.client.view.OraMTSGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.OraMTSGUI added to View Type Registry with the key as [OraMTSUI]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallLocationGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.InstallLocationGUI added to View Type Registry with the key as [InstallLocationUI]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallTypesGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.InstallTypesGUI added to View Type Registry with the key as [InstallTypesUI]
INFO: Adding View[type: oracle.install.ivw.client.view.FinishGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.FinishGUI added to View Type Registry with the key as [FinishUI]
INFO: Initial values of Setup Properties :
PROPERTY VALUE
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
DECLINE_SECURITY_UPDATES false
FROM_LOCATION C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Releas
e 2\client\install\../stage/products.xml
INSTALL_TYPE InstantClient
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE
ORACLE_HOME
ORACLE_HOSTNAME mndwg068cs.rad.afpaa.r.mil.uk
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en","en_GB"}
oracle_install_LaunchNetCA false
oracle_install_NoMigration true
oracle_install_RACInstall false
oracle_install_WindowsSystemDirectory
oracle_install_client_OraMTSPortNumber 49155
oracle_install_db_ConfigurationType
oracle_install_db_InstallEdition EE
oracle_install_db_InstallType
INFO: Launching Oracle Client Installer
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state init
INFO: Waiting for completion all forked tasks at state init
INFO: All forked task are completed at state init
INFO: Completed background operations
INFO: Executing action at state init
INFO: Completed executing action at state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <init>
INFO: Completed validating view at state <init>
INFO: Validating state <init>
WARNING: Validation disabled for the state init
INFO: Completed validating state <init>
INFO: Verifying route success
INFO: Get view named [InstallTypesUI]
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: View for [InstallTypesUI] is oracle.install.ivw.client.view.InstallTypesGUI@2398dc19
INFO: Initializing view <InstallTypesUI> at state <clientInstallType>
INFO: InstallTypesPane installType is: InstantClient
INFO: Completed initializing view <InstallTypesUI> at state <clientInstallType>
INFO: Displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Completed displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Loading view <InstallTypesUI> at state <clientInstallType>
INFO: Completed loading view <InstallTypesUI> at state <clientInstallType>
INFO: Localizing view <InstallTypesUI> at state <clientInstallType>
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: Completed localizing view <InstallTypesUI> at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientInstallType
INFO: Completed executing action at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Client Install Type set in InstallTypeUI is : Runtime
INFO: Validating view at state <clientInstallType>
INFO: Completed validating view at state <clientInstallType>
INFO: Validating state <clientInstallType>
WARNING: Validation disabled for the state clientInstallType
INFO: Completed validating state <clientInstallType>
INFO: In Transition of InstallTypesAction:
INFO: Verifying route ic_no
INFO: Get view named [ProductLanguageUI]
INFO: View for [ProductLanguageUI] is oracle.install.ivw.common.view.ProductLanguageGUI@1875a340
INFO: Initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Completed displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Loading view <ProductLanguageUI> at state <productLanguage>
INFO: Completed loading view <ProductLanguageUI> at state <productLanguage>
INFO: Localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Fetching Available Languages...
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state productLanguage
INFO: Waiting for completion all forked tasks at state productLanguage
INFO: All forked task are completed at state productLanguage
INFO: Completed background operations
INFO: Executing action at state productLanguage
INFO: Completed executing action at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: The languages in which the product will be installed are [en, en_GB]
INFO: Validating view at state <productLanguage>
INFO: Completed validating view at state <productLanguage>
INFO: Validating state <productLanguage>
INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
INFO: Completed validating state <productLanguage>
INFO: Verifying route productlanguage_yes
INFO: Get view named [InstallLocationUI]
WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@15837e8
INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Loading view <InstallLocationUI> at state <getOracleHome>
INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOracleHome>
INFO: Completed validating view at state <getOracleHome>
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Runtime.xml
INFO: refDataFile: C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Release 2\client\stage\cvu\oracle.client_Runtime.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Release 2\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/C:/Dev Citrix Tools/Oracle Tools/Oracle 11g client Release 2/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/C:/Dev Citrix Tools/Oracle Tools/Oracle 11g client Release 2/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: PATH has :==>C:\Users\setupc\AppData\Local\Temp\OraInstall2011-10-10_04-13-35PM\jdk\jre\bin;.;C:\Windows\system32;C:\Windows;D:\ORADEV10g\jdk\jre\bin\classic;D:\ORADEV10g\jdk\jre\bin;D:\ORADEV10g\jdk\jre\bin\client;D:\ORADEV10g\jlib;D:\ORADEV10g\bin;D:\ORADEV10g\jre\1.4.2\bin\client;D:\ORADEV10g\jre\1.4.2\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\CA\SharedComponents\ScanEngine;C:\Program Files\CA\SharedComponents\CAUpdate\;C:\Program Files\CA\SharedComponents\ThirdParty\;C:\Program Files\CA\SharedComponents\SubscriptionLicense\;C:\Program Files\CA\eTrustITM;C:\Program Files (x86)\Citrix\system32\;C:\Program Files (x86)\Citrix\System32\Citrix\IMA;C:\Program Files (x86)\Citrix\System32\Citrix\IMA\Subsystems;C:\Windows\System32\Citrix\IMA;C:\Program Files (x86)\Citrix\system32;C:\Program Files (x86)\Common Files\Citrix\System32\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_NO
INFO: Verifying route INVENTORY_NO
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prereqExecutionDecider>
INFO: Completed validating view at state <prereqExecutionDecider>
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Get view named [PrereqUI]
INFO: View for [PrereqUI] is [email protected]2ac
INFO: Initializing view <PrereqUI> at state <checkPrereqs>
INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
INFO: Displaying view <PrereqUI> at state <checkPrereqs>
INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
INFO: Loading view <PrereqUI> at state <checkPrereqs>
INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
INFO: Localizing view <PrereqUI> at state <checkPrereqs>
INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Runtime.xml
INFO: refDataFile: C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Release 2\client\stage\cvu\oracle.client_Runtime.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: mndwg068cs:C:\Users\setupc\AppData\Local\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Nodes are prepared for verification.
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:128MB (131072.0KB)
INFO: Actual Value:3.9996GB (4193848.0KB)
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Free Space: mndwg068cs:C:\Users\setupc\AppData\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:130MB
INFO: Actual Value:26.0185GB
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:64-bit
INFO: Actual Value:64-bit
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:1023
INFO: Actual Value:791
INFO: -----------------------------------------------
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <checkPrereqs>
INFO: Completed validating view at state <checkPrereqs>
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Completed validating state <checkPrereqs>
INFO: Verifying route success
INFO: Get view named [SummaryUI]
WARNING: Failed to load the view [SummaryUI] . Reason: .
Refer associated stacktrace #oracle.install.commons.flow.ViewManager:367
INFO: Terminating all background operations
INFO: Terminated all background operations
SEVERE: [FATAL] [INS-08802] Unable to instantiate the View class referred by View ID 'SummaryUI'.
CAUSE: The given class do not represent a valid View class or an unexpected error occured while instantiating it.
ACTION: No additional information available.
SUMMARY:
- java.lang.NullPointerException.
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:370
INFO: Advice is ABORT
SEVERE: Unconditional Exit
INFO: Adding ExitStatus FAILURE to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -1
INFO: Shutdown Oracle Client Installer
INFO: Unloading Setup DriverHi;
Please see below note than Please see:
Master Note For Oracle Database Client Installation [ID 1157463.1]
*+<Moderator edit - MOS Doc content deleted - pl do not post contents of MOS Docs>+*
If notes not help than i suggest rise SR
Regard
Helios -
Windows 7 64-bit and need to install both 32bit and 64bit Oracle 11g client
Hello
First I am sorry for asking what is probably a common knowledge answer from most in the forum. I just cannot find a straight forward answer searching these forums or via google.
We have Windows 7 64-bit planned as our next desktop upgrade. We have several Oracle databases, and all of the client software in our environment is 32 bit.
I want to try and be ahead of the curve so I want to deploy the latest 64-bit 11g client instead of our current client (10g 32bit).
The simple question is this: Can we actually do that with our 32bit application suite or do I need to install the 32bit client for 32bit applications side-by-side with the 64bit 11g Oracle client for future 64-bit clients?
For a follow up to that, if I do, then does anyone have good instructions on that? I found one article on this but it seemed custom and made use of the mklink command, so I have my doubts this is correct.
ThanksThanks for the tip. What I wonder though is should I do that or does the 64-bit client have a 32-bit layer that works with 32-bit applications or, am I forced to still deploy a 32-bit client because of my 32-bit software?
Thanks -
Which Oracle client to use? with CRS2008 on Windows 2008 R2 64bit
Hi,
We are setting up a standalone Crystal Reports 2008 Server on Windows 2008 R2 64bit. This server will serve some reports that will pull data from an Oracle 11g DB. Several Oracle 10g/11g, (32bit or 64bit) DB client has been tried, but CRS cannot connect to the oracle DB using any of them. Which oracle client is known to be working well on this setup?
CRS 2008 <> Windows 2008 R2 64 bit <> Xeon E5600 series machine
Thanks,
SteveHello,
CRS2008 v1 supports Oracle 9.2, 10g R1, 10G R2 and 11g R1.
The client to use on those version are the same as the server meaning if you have a 11g R1 server then you can use an Oracle Net Client 11G R1. But you can use also a JDBC, ODBC, OLEDB Oracle 11G R1.
If you have a CRS2008 v0, then Oracle 11G is not supported. Only 9.2, 10g R1 and 10G R2.
I hope this will help you
Regards,
Philippe -
Error installing Oracle client 10.2 on Redhat5 64bit
I get the following error when I'm trying to run Oracle client 10.2 x86 32bit on a redhat enterprise 5 64 bit. My understanding is that I can install client 32 on a 64 bit server. How can I make this work without getting 64bit client?
Error in invoking target 'client_sharedlib' of makefile '/home/auser/oracle/product/10.2.0
/client_1/network/lib/ins_net_client.mk'. See '/home/auser/oraInventory/logs/installActions2010-03-17_06-43-12PM.log' for details.
log file:
INFO: Using paramFile: /bi/10201_client_linux32/client/install/oraparam.ini
INFO:
INFO:
INFO: Checking installer requirements...
INFO:
INFO: Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
INFO: Passed
INFO:
INFO:
INFO: All installer requirements met.
INFO:
INFO:
INFO: The commandline for unzip:
INFO: /bi/10201_client_linux32/client/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/\*.jar -d /tmp/OraInstall2010-03-17_06-43-12PM
INFO: The commandline for unzip:
INFO: /bi/10201_client_linux32/client/install/unzip -qqq ../stage/Components/oracle.swd.oui/10.2.0.1.0/1/DataFiles/\*.jar -d /tmp/OraInstall2010-03-17_06-43-12PM
INFO: The commandline for unzip:
INFO: /bi/10201_client_linux32/client/install/unzip -qqq ../stage/Components/oracle.swd.oui.core/10.2.0.1.0/1/DataFiles/\*.jar -d /tmp/OraInstall2010-03-17_06-43-12PM
INFO:
INFO: The number of files bootstrapped for the jre is 590.
INFO:
INFO: The number of files bootstrapped for the oui is 94.
INFO: Execvp of the child jre : the cmdline is /tmp/OraInstall2010-03-17_06-43-12PM/jre/1.4.2/bin/java, and the argv is
INFO: /tmp/OraInstall2010-03-17_06-43-12PM/jre/1.4.2/bin/java
INFO: -Doracle.installer.library_loc=/tmp/OraInstall2010-03-17_06-43-12PM/oui/lib/linux
INFO: -Doracle.installer.oui_loc=/tmp/OraInstall2010-03-17_06-43-12PM/oui
INFO: -Doracle.installer.bootstrap=TRUE
INFO: -Doracle.installer.startup_location=/bi/10201_client_linux32/client/install
INFO: -Doracle.installer.jre_loc=/tmp/OraInstall2010-03-17_06-43-12PM/jre/1.4.2
INFO: -Doracle.installer.nlsEnabled="TRUE"
INFO: -Doracle.installer.prereqConfigLoc=/tmp/OraInstall2010-03-17_06-43-12PM/prereq
"installActions2010-03-17_06-43-12PM.log" 4698L, 304960C>
My understanding is that I can install client 32 on a 64 bit server. How can I make this work without getting 64bit client?
>
Your 64-bit OS will need to be 32-bit compatible, and that is not always guaranteed; Does it support both binaries?
I would strongly recommend that you download the 64-bit Client software; it should work just fine. Do you mind sharing with us why you do not wish to install the 64-bit Client software?
{thread:id=974150}
Regards,
Phiri -
Oracle Client 10.2.0.5 32 bits for windows 7 64bits
Hi
I do not have access to oracle support, but I really need to download this patch in order to install it on Windows 7 64 bits and 2008 R2...
Please somebody can put me this patch on a share/ftp or other ? Because I really need this..
Thanks a lot.
Jerome
Oracle Client 10.2.0.5 32 bits for windows 7 64bits
[email protected]Patches are only available to Oracle customers with valid support contracts. If you do have such a contract, pl contact the person in your team who has access to My Oracle Support to download the needed patch. Patches cannot be posted on public servers as this violates ones support contract
Srini -
From where I can download Oracle Client 11g R2 for Windows 7 64bit? Thanks in advance.
From where I can download Oracle Client 11g R2 for Windows 7 64bit? Thanks in advance.
Search engine broken?
Just search for Oracle 11g download and you get this link on the very first page
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Then select 'See All' from the Microsoft Windows (x64) in the Oracle Database 11g Release 2 section
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win64soft-094461.html
Can we assume you know how to search that web page for the word 'Client'? -
64bit oracle server with 32bit client on the 64bit win2k8
I am working on migrating application server end run on 32bit win2k3 to 64bit win2k8.What i do below:
1.installed 64bit oracle server 11g
2.installed 32bit oracle client
3.installed application server end
I want to know is that right?And i found that the ORACLE_HOME in the environment variables was empty.Was that right?I am working on migrating application server end run on 32bit win2k3 to 64bit win2k8.What i do below:
1.installed 64bit oracle server 11g
2.installed 32bit oracle client
3.installed application server end
I want to know is that right?And i found that the ORACLE_HOME in the environment variables was empty.Was that right? -
Oracle Client 11g 32bit on Windows 7 64Bit, does not show Norwgian Chars?
our company develop a program that communicate with Oracle Database though Oracle Client.
to use the program the user needs to install oracle client in as a runtime.
now some of our clients has some problem with the Norwegian chars! it shows as a question mark (?)
all the Norwegian chars (ø,æ and å) in the program that comes from the database replaces by (?)
I did many research but yet no luck! and ideas (I would love to welcome few so I can test them all)
cheers
Edited by: SJari on Jun 15, 2011 2:32 AMWhich tool are you using to query the data?
What is the NLS setting at the client side?
I would recommend a read through the Globalization support guide.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/toc.htm -
Oracle client installation on windows 7 64bit
i am trying to install oracle client on win 7, during the installation it popup a message saying cannot copy the files to start menu or desktop. Already i logged in as administrator.
Please find the last lines of the log file.
INFO: instantiating 'G:\app\Administrator\product\11.2.0\client_2\OPatch\opatch.ini'.
INFO: instantiating 'G:\app\Administrator\product\11.2.0\client_2\OPatch\opatch.ini'.
INFO: Copying files for 'Oracle Universal Installer 11.2.0.1.0 '
INFO: Copying files for 'Oracle Universal Installer 11.2.0.1.0 '
INFO: 5/9/12 12:12:16 PM GST: Starting install Install Phase 1 of component Oracle Universal Installer
INFO: Setting variable 'MSVCREDIST_LOC' to 'vcredist_x86.exe'. Received the value from a code block.
INFO: Setting variable 'MSVCREDIST_FLAGS' to '/q:a /c:"VCREDI~1.EXE /q:a /c:""msiexec /i vcredist.msi /qn"" "'. Received the value from a code block.
INFO: Setting variable 'MSVCREDIST_INSTALL' to 'true'. Received the value from a code block.
INFO: Calling Query areasQueries10.2.0.1.0 getProductHome
name = oracle.jdk
startVersion = 1.5
endVersion = 1.5
acceptCompatible = null
INFO: Setting the PROD_HOME variable of 'oracle.jdk_1.5.0.17.03' to 'G:\app\Administrator\product\11.2.0\client_2\jdk'. Received the value from the variable calculation.
INFO: Query Returned: G:\app\Administrator\product\11.2.0\client_2\jdk
INFO: Setting variable 'JRE_LOCATION' to 'G:\app\Administrator\product\11.2.0\client_2\jdk'. Received the value from a code block.
INFO: Setting variable 'JRE_LOCATION' to 'G:\app\Administrator\product\11.2.0\client_2\jdk\jre'. Received the value from a code block.
INFO: Setting variable 'JRE_LOCATION' to 'G:/app/Administrator/product/11.2.0/client_2/jdk/jre'. Received the value from a code block.
INFO: Setting variable 'ABSOLUTE_JRE_LOCATION' to 'G:/app/Administrator/product/11.2.0/client_2/jdk/jre'. Received the value from a code block.
INFO: Setting variable 'JRE_LOCATION' to '/jdk/jre'. Received the value from a code block.
INFO: Setting variable 'JRE_LOCATION' to 'jdk/jre'. Received the value from a code block.
INFO: Setting variable 'JRE_LOCATION' to '../../jdk/jre'. Received the value from a code block.
INFO: Setting variable 'JRE_LOCATION' to '..\..\jdk\jre'. Received the value from a code block.
INFO: Setting variable 'ABSOLUTE_JRE_LOCATION' to 'G:\app\Administrator\product\11.2.0\client_2\jdk\jre'. Received the value from a code block.
INFO: Calling Query generalQueries10.2.0.2.0 getOSName
INFO: Query Returned: NT_X86
INFO: Calling Query generalQueries10.2.0.2.0 getOSName
INFO: Query Returned: NT_X86
INFO: Calling Query generalQueries10.2.0.2.0 getOSName
INFO: Query Returned: NT_X86
INFO: Calling Query generalQueries10.2.0.2.0 getOSName
INFO: Query Returned: NT_X86
INFO: Calling Query generalQueries10.2.0.2.0 getOSName
INFO: Query Returned: NT_X86
INFO: Setting variable 'JRE_MEMORY_OPTIONS' to '-mx96m'. Received the value from a code block.
INFO: Calling Action ntw32FoldersActions10.2.0.3.0 ntCreateItem
selectedNodes = null
groupName = Oracle - OraClient11g_home2\Oracle Installation Products
itemName = Universal Installer
exeName = G:\app\Administrator\product\11.2.0\client_2\oui\bin\setup.exe
paramName = null
workingDir = G:\app\Administrator\product\11.2.0\client_2\oui
iconFileName = null
icon = 0
cmdType = null
multiparamName = null
runAsAdmin = null
INFO: creating 'Universal Installer' in folder 'Oracle - OraClient11g_home2\Oracle Installation Products'
INFO: creating 'Universal Installer' in folder 'Oracle - OraClient11g_home2\Oracle Installation Products'
INFO: Exception thrown from action: ntCreateItem
Exception Name: AddItemException
Exception String: Unable to create an item in Windows Start Menu or Desktop
Exception Severity: 0
INFO: Exception handling set to prompt user with options to Retry Ignore
User Choice: Retry
INFO: creating 'Universal Installer' in folder 'Oracle - OraClient11g_home2\Oracle Installation Products'
INFO: creating 'Universal Installer' in folder 'Oracle - OraClient11g_home2\Oracle Installation Products'
INFO: Exception thrown from action: ntCreateItem
Exception Name: AddItemException
Exception String: Unable to create an item in Windows Start Menu or Desktop
Exception Severity: 0
INFO: Exception handling set to prompt user with options to Retry Ignore
User Choice: Retry
INFO: creating 'Universal Installer' in folder 'Oracle - OraClient11g_home2\Oracle Installation Products'
INFO: creating 'Universal Installer' in folder 'Oracle - OraClient11g_home2\Oracle Installation Products'
INFO: Exception thrown from action: ntCreateItem
Exception Name: AddItemException
Exception String: Unable to create an item in Windows Start Menu or Desktop
Exception Severity: 0
INFO: Adding ExitStatus STOP_INSTALL to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -4
INFO: Shutdown Oracle Client Installer -
Problem Installing Oracle Client 11g R2 64 bit on Windows 7 Enterprise 64
Hi,
I am having problems installing the Oracle Client 11g R2 64 bit installation on my Windows 7 64 bit Enterprise machine. The installer does all the checks successfully, it gets me to summary screen and I press finish to start the installation. It then opens the installation mask where it first says Checking whether Central Inventory is locked by another OUI session. After that it very briefly shows Central Inventory is not locked and then the window immediately dissapears with no other errors. I tried installing at my colleague's W7 Enterprise 64 machine and it behaves a little differently but with the same result. Basically on his machine it never even opens the Install mask, when pressing finish from the Summary it just disappears and never starts installation. I tried installing 11g R1 and that loads the first mask and when i press next it just dissapears. I basically need an oracle client 64 bit installation on my machine deperately. Please help. Thanks
AlexOne user above reported installing the 64 bit odbc drivers and then the 32 bit drivers. How did you do that? I'm a neophyte to this.
I'm trying to get a 32 bit ODBC oracle driver to work on a server 2008 R2 machine. I downloaded the 11gR2 x64 client from oracle. The install process makes no mention of 32bit vs 64bit installation. After running the instalation I can run the ODBC administrator and generate a DSN for oracle. When I run the 32 ODBC administrator there is no oracle driver available except the microsoft driver for oracle. When I select that it says that I need to install oracle.
I had at first tried to install 11g instant client. However that didn't work for the 2008 R2 machine. It complained about some registry error when I tried to run the ODBC install program. I need to get it to work for a customer asap. -
32 Bit Oracle Client Libraries on a 64 Bit Machine
Hello,
I own a 32 bit application that is running on a 64 bit linux machine currently only installed with 64 bit oracle client libraries. I requested the administrator install the 32 bit client libraries so that my application can function and they tell me that it is not possible. They cited a Meta-Link article that I do not seem to have access to, but this doesn't seem right. Has anyone else ever installed 32 bit compatible client libraries on a 64 bit machine. Thanks
-Steve
(First Time Poster)On Linux (and this is only on Linux, not on Solaris and AIX !) if the OS is 64bit, only 64 bit Oracle is supported.
Check the Certify pages for Linux x86-64. This is in the critical notes :
"Linux x86-64, support on AMD64/EM64T and Intel Processor Chips that adhere to the x86-64 architecture with supported Linux releases. *Running Oracle 32-bit on AMD64/EM64T (64-bit OS) is not supported .*
Oracle 32-bit running on AMD64/EM64T with a 32-bit OS is supported, refer to platform Linux x86 for more information on product availability. "
Hemant K Chitale
http://hemantoracledba.blogspot.com
You can access certify at http://www.oracle.com/technology/support/metalink/index.html
Edited by: Hemant K Chitale on Sep 3, 2009 11:43 PM -
Running in 64 bit mode with the 32 bit Oracle client installed
I have seen many postings on this issue but none of the suggested solutions have helped me.
I am running visual studio 2010 professional with SP1 on windows 7 64 bit machine. When I try to run a web service locally and call it with SoapUI, I get the following error message during OracleConnection.Open().
Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
I have tried setting up the build configuration and the project settings to target 32 bit but that has not helped. I have also tried removing the reference to System.Data.OracleClient that shows being under Program Files (x86) and add a new reference to the dll under GAC_64. That too did not work.
I only have the 64 bit client installed on my machine.
Any help will be appreciated.
Thank you1. Visual Studio any version is 32 bit ONLY irrespective of hardware or OS bits. So to DEVELOP with Oracle Client you MUST install 32 bit Oracle ODAC components. Task manager will show devenv.exe *32 (to confirm 32 bit Visual Studio application).
2. You can run your web application inside IIS/IIS Express in your PC which independently can be either 32bit or 64bit. If it is 64 bit, you MUST also install 64 bit Oracle ODAC components which means you'll have to install both 32bit and 64bit in your 64 bit Win7 running on 64bit hardware.
3. In Visual Studio if you compile with "AnyCPU" as target, the resultant binaries (Web/NonWeb) can be both 32bit or 64bit. So if target PC is "AnyCPU" or "x64", you MUST install Oracle ODAC 64 bit in the target OS if that target OS is 64bit. You don't have to install 32bit ODAC in the target PC.
4. One more catch to above scenario is the target OS could be 64bit simulated OS on a 32bit hardware. In such case you MUST install both 32bit and 64bit ODAC components.
So while you ask your network team to download ODP.NET/ODAC Components make sure you ask them to download both 32bit and 64bit. Total nearly 600MB.
Hope this helps many people out there. -
ODBC Driver for Oracle Client 11.1.0.7
Hi,
I am using Oracle Client 11.1.0.7 .
My application requires odbc Connection
Where I can find the library file , as I didnt find any download on Oracle Website .
Kindly help898763 wrote:
Kindly reply , is there linux 64 bit download for the required versionDid you have a look for yourself??
Why do I need to do the Googling for you??
You don't even specify which Linux!!
As per your question. I don't understand. You need ODBC for Oracle 11.1.0.7.
What has this to do with Linux 64bit ??
From Linux, simply install a client and use SQLnet, not?? -
How do I know the version of Oracle Client
How can I find out the version of my Oracle Client?
Thanks!arbabu wrote:
SQL> select BANNER product_versions
2 from v$version
3
SQL> /
PRODUCT_VERSIONS
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>That is obviously wrong.
SQL*Plus: Release 9.2.0.6.0 - Production on Fri Oct 31 10:50:34 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select BANNER product_versions
2 from v$version;
PRODUCT_VERSIONS
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Productio
NLSRTL Version 10.2.0.4.0 - Production
SQL> quit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Y:\>sqlplus -v
SQL*Plus: Release 9.2.0.6.0 - Production
Y:\>Nicolas.
Maybe you are looking for
-
My iphone is 4s. Yesterday at 5am i found the software update 7.1.1 & there wasnt anything that said that this update for iphone 5 or more, so i installed it, but imy phone kept showing me that sign connect with the itunes thing, and i did connect, a
-
My iphone was synced to my old computer How do i add content to my phone from my new computer. It says i can only be synced with one computer and it will delete everything on my phone to sync with the new computer. This doesn't make much sense. What
-
Macbook will not come on.
I was just on my macbook this morning, and shut it down properly when I was finished. However, it will now not power back up. When plugged into the adapter, the hook up lights up and the battery is charging. When I remove the adapter and press the bu
-
my wife and 1 both have new iPhone 4's. Is it best to use the same apple id so we can share music and photo's?
-
How can i get it to authorize facebook on lightroom 5.5 with out it not crashing on me
hi all everytime i go to authorize facebook on lightroom 5.5 it keeps coming up and saying its not responding how can i fix this everything else works fine on it