64Bit Vista iPhone recovery Drivers not Found Help

Hi, I'm trying to update my iPhone to 2.02 but the iPhone has been put in recovery mode and Vista (64bit) its complaining that it cant find the drivers. I have tried linking it to the drivers in the apple folder but it still cant find them. Any one know what to do? as I cant use the phone until I fix it being in recovery mode
Thanks, Cameron

Yeah, I am doing it on my laptop now but its just annoying and would like to find a fix
Thanks

Similar Messages

  • JDBC drivers not found---Pls help

    Hi All,
    Pls help me out to solve this issue
    I have XI 3.0 and R3 4.7 EE seperately . (Both are for education purpose)
    While doing  JDBC scenario, I got error <b>"JDBC drivers not found"</b> in Adapter Framework. When contacted I was told to install JDBC drivers according to R3 4.7 EE's Database version and not to disturb XI database. We have Oracle database for R3 4.7 EE.
    My questions are
    1. Is that correct that I should not disturb XI database ?
    2. If I install JDBC drivers according to R3 4.7 EE's Database version , In future will I get any problem like the same and other when I do JDBC scenario ?
    3. I have been searching but not getting the right place to download JDBC drivers.
    Could you please give me the link where I can download JDBC drivers ?
    Thanks in advance
    ss

    Hi,
    you can find JDBC drivers here :
    <a href="http://developers.sun.com/product/jdbc/drivers">http://developers.sun.com/product/jdbc/drivers</a>

  • Can anyone help pls, my computer says 'device drivers not found?? ;-(

    can anyone help pls, my computer says 'device drivers not found?? ;-(

    Is the latest version of iTunes installed?

  • "Recovery partition not found" when trying to creat recovery discs.

    I received the following error message when trying to create recovery discs for the first time "recovery partition not found"  HP G61 401SA Notebook and it is a couple of years old and has windows 7 as th OS.
    I specifically purchased DVD-R discs for the disc creation, which was advised from HP site was the only disc suitable.
    Am I doing something incorrect or is there an issue?
    Is this why I am unable to also create a back up - are the two things related? 

    GustoRMC wrote:
    Hi Erico
    I have managed to create the snip - but unsure how to incorprate into the reply here as copy paste will not work - how can I do that?#
    The dvd - r are Verbatim Wide Inkjet I have had success with the Verbatim DVD+R
    I did not know you are volunteer helpers - thanks goodness for people like you as trying to contact HP support for help was impossible and seemed like I kept going around in circles. No worries.    We are here to help.
    One more thing, could you advise on how much space the recovery might be approximately - I will need to make sure a USB has enough memory available. Take another look at the disk management window. The partition sizes are visible in the descriptions. My HP loaner has a large recovery partition at >20GB. That mean I had to use a 32GB usb flash drive Most others are smaller and a 16GB usb flash drive will suffice.
    Regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Kernel Panic ACIP drivers not found installing OS X (10.4.9) on External HD

    Hi
    , my internal HD on the Macbook ( Macbook White 13" Core2Duo , 2007 Edition) died a couple of days ago ( Seagate HD started to make noises and was not recognice by the Macbook ).
    So i wanted to install the OS X on a External HD (Transcend Storejet 25D3 640Gig, so that i could boot the mac from the External.
    The Format and Partition of the HD and so the installation of the first DvD runs without any Problem, but when its finish and wants to re-boot, i got the Kernel Panic on the drivers not found for the ACIP.
    Its not possible at all to install and Boot a Macbook using OS X from a External HD ? Or, what i'm doing wrong here ? Any Ideas ?
    Thanks a lot
    Indy72

    Hi Lissa
    , thanks for your help, but i replace the external HD with the "broken" internal HD and was able to continue with the installation without any problems. It seems that for some reason its not working to get some drivers for the USB connection of the HD, maybe by firewire would have work, but i dont have one =) .
    Now lets hope that the Seagate Momentus 5400.3 ST9120822AS its not badly damage so that some Data can be restored.
    Indy72

  • Core Audio Drivers not Found Error (no Logic Pro Installed)

    I am receiving the following error in GarageBand 08 and was hoping someone might be able to assist.
    When recording with a USB mic in GarageBand 08 (MXL USB.006) I sometimes get the following error: (Core Audio Drivers not Found). The error occurs after I have completed a recording session and removed the USB mic. (The error occurs regardless of if I close GB before removing the mic; but only occasionally)
    In checking the GB preferences, the Built-In audio option has disappeared from the drop down menu entirely for both Audio Input and Audio Output (although it still can find the USB mic if I reattach). In the Utilities folder, audio preferences, the Built-In audio option is also missing from the drop downs. (Not grayed out -- missing).
    In researching the problem, it looks like a similar problem occurs with the Logic Pro suite but I don't have that installed on my Mac (and never have). In contacting MXL support, they noted that it was a problem with Leopard and they didn't have a fix.
    At this point, I'm looking for either (1) a fix I've missed in my research or (2) an easy way to reinstall/replace/find the drivers without having to restore my system from backup. I've received the error three times now and restoring from back up - which clears the error and restores the drop down - is getting tiresome.
    Thank you!

    Thank you for the suggestion! I believe that was the issue the first time I lost the drivers. Unfortunately, even resetting the inputs and closing GB before disconnecting doesn't guarantee my Built-In audio won't disappear. Thank you for trying though!

  • HT4528 iphone 4s will not charge, help anyone?

    iphone 4s will not charge, help anyone?

    If the iPhone doesn't charge when connected to the power adaptor and when connected to your computer after trying another USB cable to rule out a problem with the cable being used, more than likely the iPhone has a hardware problem with the battery or something else.
    Make an appointment at an Apple Store if there is one nearby to confirm.

  • Find my iphone wont turn on in my mac it says recovery partion not found

    find my iphone wont turn on in my mac it says recovery partion not found

    Take a look at this:
    iCloud: Troubleshooting Find My iPhone, iPad, iPod touch, or Mac
    You may need to run some disk checks on the drive. If you are using a RAID configuration, please note you cannot use Find my Mac.
    If all else fails, you may need to reinstall OS X

  • Apple Application Support was not found help!!!!!

    A few days ago i got on iTunes but this error message came up saying
    Apple Application Support was not found.
    Apple Application Support is required to run iTunes. Please uninstall
    iTunes, then install iTunes again.
    Error 2 (Windows error 2)
    I have looked at many discussions and forum posts and most of them say to extract the itunes setup with winrar
    but i cannot see where it says to extract all i see is add to and compress.
    Please help me!!! I run windows 7 on an Acer laptop if this means anything. It would be highly appreciated thank you!

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
    tt2

  • Updated to 10.5 on XP and now iTunes will NOT open - Entry Point Not Found - HELP!

    Tried to update to iTunes 10.5 on Windows XP.  Everything seemed to install properly and I restarted.  However, when I try to open iTunes, it will not open and I get the following error message:
    iTunes.exe - Entry Point Not Found
    'The procedure entry point AVCFAssetClassWithByteStreamAndOptions coulf not be located in the dynamic link library AVFoundationCF.dll'
    When I click 'OK' (which is the only option), it says:
    'iTunes was not installed correctly.  Please reinstall iTunes.
    Error 7 (Windows error 127)'
    I have updated iTunes on my machine in the past numerous times without ever having an issue.  Now, I get this and cannot access iTunes at all.  I have tried reinstalling 10.5 and restarting my machine about five times now...to no avail.  I am hesitant to remove iTunes, since I have 6000 songs and do not want to lose my library.  Is there anything I can do?  Seems like it should be a simple fix.
    When I called Apple, they told me to upgrade my OS to Vista.  Huh?  That seems like overkill to me.  iTunes has always run fine on XP.
    Please help!

    I found another site and it suggested that I go through System Preferences and check downloads again.  The iTunes update was still there indicating that it still needed to be downloaded.  So I downloaded it again and now it works fine.  I hope this might help someone else.
    Thank you

  • MSI GAMING 970: Network drivers not found

    Good day,
    I have encountered an issue, made more confusing as i was playing a MMO when it occurred. MSI GAMING 970
    Network drivers are missing:
    "Windows did not detect a properly installed network adapter. If you have a network adapter, you will need to re-install the driver"
    so I try to reinstall them. then I get the error message :
    "The realtek network controller was not found. If Deep Sleep Mode is enabled Please Plug The Cable"
    The case has not been opened, the computer was on and running a game at the time of the fault.
    Anyone got any ideas?
    Thanks in advance for your help.
    AJS

    Quote from: tyrsfang on 14-January-15, 20:26:54
    I did give all relevant information as the issue is with the integrated network interface.
    Device manager shows nothing, drivers won't re-install because it can't see the device. Drivers are from CD. I can get (very) limited access to the internet with a wireless card but it's intermittently at best.
    Read the post.
    What CPU? What power supply? What memory?
    Without proper information we are going to spend many posts trying to figure out what the problem is. Instead of arguing it, just provide the information from the >>Posting Guide<< and we can more easily and better diagnose the problem.

  • How do I get past the drivers not found problem during Windows 7 install?

    I have a brand new (March 2012) MBP running Mac OS 10.7.3 (Lion) with a SuperDrive.  I'm trying to use Boot Disk Assistant to install Windows 7 with a valid Windows 7 DVD burned from an .iso.  I've partitioned the 750 GB HDD with 500 GB for Mac OS and 250 GB for Windows.  The system reboots and starts to install Windows 7.  Then it pops up an error:
    "A required CD/DVD drive device driver is missing.  If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now.
    Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step."
    Of course, I can't eject the Windows setup DVD because the eject button doesn't work so I can insert the Windows Support Software that I downloaded from Apple.  So, I copied the Windows Support Software to a USB drive.
    Once I get to this point, I can browse to the USB drive and I get the following file tree:
    Drivers
         Apple
              x64
         Asix
         Atheros
         ATI
         Broadcom
         Cirrus
         IDT SigmaTel
         Intel
              Chipset
                   All
                   ia64
                   Lang
                        Chip
                             (various languages)
                   WIN7
                   x64
         Marvel
         NVidia
              NVidiaChipset32
                   Ethernet
                        NAM
                   HDAudio
                   SMBUS
                   SMU
              NVidiaChipset64
                   Ethernet
                        NAM
                   HDAudio
                   SMBUS
                   SMU
              Win7_32
              Win7_64
         RealTek
    The only directory that the installer recognizes as having valid drivers is the Intel > Chipset > WIN7.  When I select all of the drivers listed, the installer acts like it's installing something but then it stops saying that new devices were not found.  I can't get past this point.  The Windows 7 installer will not continue.  If I select any of the other directories, I get the message "No device drivers were found.  Make sure that the installation media contains the correct drivers, and then click OK."
    Any thoughts?  Admittedly, this is the my first experience dealing with Mac OS and I'm completely out of my league.  However, this is a Windows installation issue and I'm getting hung up on device drivers.  Usually in the PC world, I can easily go to the manufacturer's website and just download the drivers I need directly.
    ...Mel    
    Sr. Systems Administrator - Windows, SharePoint

    valid Windows 7 DVD burned from an .iso.
    Usually burned ISO to DVD only works when burn speed is set to slowest.
    Otherwise there are a number of problems with the install failing to do proper install, sometimes not even booting to start the install. Trouble is from using Apple Disk Utility. Burned in Windows, the ISO will be fine. Using Disk Utility at slowest has become "try reburn again at reduced speed."
    You can use mouse on startup to eject DVDs but what you want is your drivers later after Windows is installed, and have them on USB flash or something.
    you don't need any drivers except in a few cases (MacBook Air that lacks DVD and uses USB-DVDs)
    Product support page is best place to start with every device and product.
    www.apple.com/support/bootcamp
    has manual pdf, faq, how to, support articles

  • Javax.naming.NameNotFoundException: buslogic.HRAppFacade not found, help!!!

    I have followed the tutorial on http://www.oracle.com/technology/obe/obe1013jdev/10131/10131_ejb_30/ejb_30.htm to create my own EJB with Jdeveloper, but I got some errors. Please help.
    When I run the client, it gave out the following errors:
    javax.naming.NameNotFoundException: buslogic.HRAppFacade not found
         at com.evermind.server.rmi.RMIClientContext.lookup(RMIClientContext.java:52)
         at javax.naming.InitialContext.lookup(InitialContext.java:351)
         at client.HRAppFacadeClient.main(HRAppFacadeClient.java:15)
    Process exited with exit code 0.
    I have created the entity and facade (with interface), but the client couldn't lookup the facade, giving out the above error. How to solve the problm? Thanks.
    The following is my source code:
    Employees.java
    package buslogic.persistence;
    import java.io.Serializable;
    import javax.persistence.Column;
    import javax.persistence.Entity;
    import javax.persistence.NamedQuery;
    import javax.persistence.Table;
    import javax.persistence.Id;
    import javax.persistence.NamedQueries;
    @Entity
    @NamedQueries({
    @NamedQuery(name = "Employees.findAll", query = "select o from Employees o"),
    @NamedQuery(name = "Employees.findEmployeeById", query = "select o from Employees o where o.empid = :empid")
    @Table(name = "\"employees\"")
    public class Employees implements Serializable {
    @Id
    @Column(name="empid")
    private int empid;
    @Column(name="name")
    private String name;
    @Column(name="phone")
    private int phone;
    public Employees() {
    public int getEmpid() {
    return empid;
    public void setEmpid(int empid) {
    this.empid = empid;
    public String getName() {
    return name;
    public void setName(String name) {
    this.name = name;
    public int getPhone() {
    return phone;
    public void setPhone(int phone) {
    this.phone = phone;
    (HRAppFacadeBean.java)
    package buslogic;
    import buslogic.persistence.Employees;
    import java.util.List;
    import javax.ejb.Stateless;
    import javax.persistence.EntityManager;
    import javax.persistence.PersistenceContext;
    @Stateless(name="HRAppFacade")
    public class HRAppFacadeBean implements HRAppFacade, HRAppFacadeLocal {
    @PersistenceContext(unitName="EJB_Project")
    private EntityManager em;
    public HRAppFacadeBean() {
    public Object mergeEntity(Object entity) {
    return em.merge(entity);
    public Object persistEntity(Object entity) {
    em.persist(entity);
    return entity;
    /** <code>select o from Employees o</code> */
    public List<Employees> queryEmployeesFindAll() {
    return em.createNamedQuery("Employees.findAll").getResultList();
    /** <code>select o from Employees o where o.empid = :empid</code> */
    public Employees queryEmployeesFindEmployeeById(int empid) {
    return (Employees)em.createNamedQuery("Employees.findEmployeeById").setParameter("empid", empid).getSingleResult();
    public void removeEmployees(Employees employees) {
    employees = em.find(Employees.class, employees.getEmpid());
    em.remove(employees);
    (HRAppFacade.java)
    package buslogic;
    import buslogic.persistence.Employees;
    import java.util.List;
    import javax.ejb.Remote;
    @Remote
    public interface HRAppFacade {
    Object mergeEntity(Object entity);
    Object persistEntity(Object entity);
    List<Employees> queryEmployeesFindAll();
    Employees queryEmployeesFindEmployeeById(int empid);
    void removeEmployees(Employees employees);
    (HRAppFacadeLocal.java)
    package buslogic;
    import buslogic.persistence.Employees;
    import java.util.List;
    import javax.ejb.Local;
    @Local
    public interface HRAppFacadeLocal {
    Object mergeEntity(Object entity);
    Object persistEntity(Object entity);
    List<Employees> queryEmployeesFindAll();
    Employees queryEmployeesFindEmployeeById(int empid);
    void removeEmployees(Employees employees);
    }

    I hit the exact same error. In my case it was due to missing "@Id" line in Departments.java. I must have accidently deleted it when pasting in some code.
    (my clue was the errors I got when starting imbedded OC4J)
    This section of Departments.java should read as follows:
    public class Departments implements Serializable {
    @Id
    @GeneratedValue(strategy=SEQUENCE, generator="DEPARTMENTS_SEQ")
    @Column(name="DEPARTMENT_ID", nullable = false)
    After fixing this, I ran a "make" of "HRApp", restarted the embedded OC4J server (terminate it, then right click HRAppFacadeBean.java, and click Run).
    Then ran the application...

  • "Error: Application Not Found" Help?

    Hey everybody, I was just wondering if anyone could help me out here. Everytime I go to open iTunes, I get an error saying "Application Not found" and I don't know why. I did some researching and heard that Nortons Anti virus might be the problem. WhichI think is probably true because Iinstalled Norton, ran a virus scan, and I can't open quite a few files. iTunes, FireFox, Google Chrome, etc... Anyone know how to fix it? I've uninstalled iTunes and re-installed it and nothing. I also went to the settings in Norton and changed iTunes from 'Auto' to 'Allow' but it still won't work. Any one know what to do?

    I figured out the problem - no need to reply.
    I mistakenly added an authentication scheme instead of an authorization scheme.
    Fixed it - works fine.
    Thanks,
    David

  • I have iMac osx  version 10.8.5 and i forgot my account login password. i can't change it using my apple ID nor i remember my password.also my fire vault is not on and my keychain won't help. PS i can't also use the terminal idea it always not found.help

    have iMac osx  version 10.8.5 and i forgot my account login password. i can't change it using my apple ID nor i remember my password.also my fire vault is not on and my keychain won't help. PS i can't also use the terminal idea it always not found please help !!

    You need to restart the iMac and hold down the Command and R keys immediately.
    You will then have the utilities drop down and you choose Terminal
    When Terminal opens, type exactly:
    resetpassword
    and press Return.
    When the Reset Password window opens, select the user for which you want to change the password.
    Enter the new password twice, and then click Save.
    Accept the next dialog window,
    And then Apply
    When finished click the apple at the left side of the menu bar, and the Restart.

Maybe you are looking for