64gb iPhone 6 says it's full. It's not.

Hi everyone! I've had no issues with my phone until this week.
A prompt suddenly came up and said i was running out of space, so i checked and had 1gb remaining-while crazy since I always have 20gb free, I did just go on vacation and took pictures- so I moved my pictures (about 2gb total) to my HDD and deleted those on my phone. Checked my memory usage and only had 0gb remaining. Did both a soft and hard reset and I jumped to 441mb remaining. I did that trick of manually jumping time to automatically remove the pictures from the recently deleted and still only had a few hundred megs.
I hooked up my phone to iTunes and that usage bar is less than half full (adds to about 25gb) but only registers 441mb remaining. Any ideas? I'm on 8.3 since last week but to be fair if this memory issue started then I hadn't noticed yet.
Any help would be appreciated I'm just afraid the only solution would be a factory reset. Thanks.

*UPDATE*
a restore from backup sorta worked, but not entirely. I did the restore but after all that, my usage on my phone said all I had was 5gb free. I sorta gave up and decided to live with it; the next morning it actually dropped to 3.9gb free, BUT by afternoon it was fine. 37.4gb free.
I have no clue what it could have been but now its fine. I can only assume the restore took awhile to work but that doesn't seem right. thanks for the help

Similar Messages

  • I have downloaded the latest version of itunes to my computer and when I sync my new iphone, it says it is syncing, but does not grab the music from my current library.

    I have downloaded the latest version of itunes to my computer and when I sync my new iphone, it says it is syncing but doe not pull the music in my library. Can anyone assist me in figuring out how to sync my iphone?  The computer that has my current music library is old so I want to get it synced before it dies...

    Download what applications?
    Apps in iTunes do not run on computers.
    What is the exact error and where specifically is it occurring?

  • I just updated to the latest version of itunes, now when i plug in iphone it says "apple mobile device service is not started"  what do I do??

    I just updated to the latest version of itunes, n ow when I plug in my iphone, it says it cannot sync because "apple mobile device service is not started"  this never happen before, what do I do??

    The Apple Mobile Device Service is a part of sever programs that "help" iTunes on Windows. It may have been disabled in the Microsoft program, msconfig, or using a third party utility, such as CCleaner.
    I would suggest trying to find and enable the service. To do so, click on the start button, click "run",  and then type "msconfig" look for the iTunes Helper entry and make sure that it's enabled.
    Additionally, there may be another service which you will have to enable. You can type something like "service.msc", (I'm not sure exactly) to see the "Services" control panel and look for it there.
    If you can't find either, feel free to post here again.
    Message was edited by: MoshBerm

  • HT1766 why does my IPHONE 5  say cant back up to Icloud not enough storage. How do I make more storage without spending more money

    Why does my IPHONE5 say cant back up to Icloud not enough storage. Whats that mean? How do I get more storage without spending more money?

    With iCloud you get 5GB of storage for free and you have to pay an annual fee for more
    Settings > iCloud > Storage and Backup > Change Storage Plan
    If you don't want to pay and still want to backup to iCloud you will need to delete data off the device until your under 5GB
    To check if you're under 5GB go Settings > Geneal > Usage
    Hop that helps

  • My Iphone 4s says connected to TV and will not let me watch any videos on Safari, and only plays sound through the device. I have not messed with the settings, and have not connected it to anything bluetooth either. It's update is IOS 6.1.3

    I have an Iphone 4S and It won't let me watch videos on my safari, which I do everyday. It says that I am connectef to a tv, yet I have not connected it to a tv during the entire time i've owned this product. I have not connected it to anything bluetooth either. It plays the sound through the device, but it will not play the video at all. the update is IOS 6.1.3

    Try disabling the computer's antivirus and firewall.
    - Next try the manual install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
    - Then try on another computer

  • HT3597 Why would my iPhone 3GS say voice command when I'm not using it?

    IPhone saying voice command when playing pandora. What would cause this to happen?

    Someone or something is activating it by pressing and holding the home button.

  • IPhone 5 says it has 3G, but will not connect to the internet unless connected to wifi

    iPhone will not connect to any apps connected to Internet or send IMessages. I can still call and text. I have tried resetting network settings, starting from factory settings, and a hard reset. Other info: I have straight talk. I recently updated my phone. Apps work when connected to internet.

    Having 3G doesn't mean you can connect to the Internet.
    You must have Cellular Data properly provision by your carrier.
    Also check iPhone Settings > Mobile/Cellular > Mobile/Cellular Data: ON

  • TS1398 my problem is my iphone 4s is connected to the internet(wi-fi) with full signal strength but freezes when browsing and says "Cannot Open Page, Safari could not open page because the server stopped responding".

    my problem is my iphone 4s is connected to wi-fi with full signal(3 bars) strength but freezes when browsing and says
    "Cannot Open Page"
    "Safari could not open page because the server stopped responding"
    I already reset the iphone to its factory settings and erase all contents but still the browsing speed freezes or not searching at all. Sometimes it will work and fast but then the problem uccors every now and then. Iv'e been using iphone 4 for two years and I still have it and works fine compared to this IPHONE 4S.

    Settings → scroll down to Safari → in Safari settings, I selected both Clear History and Clear Cookies and Data.
    IF that does not work -
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Finally - if problem still present -
    Go to Settings>General>Reset
         Reset the network settings - you will need to add the password of your home WiFi in your phone once more
    The device should turn itself off & back on then go into Settings>Wifi and join your network

  • I am trying to update my iPhone and it says disk utility full but there is nothing on my computer no files etc

    it always says disk utility full although there are no files saved on my computer, how and where are these files storing because i can never do anything on my macbook air

    and i am trying to update my phone which i can't due to tipis

  • My signal is not working it keeps saying I have full signal then searching!!!

    My signal is not working it keeps saying I have full signal then searching!!

    Hello my fellow iPhone 4s users...
    i have been going around the web for solution to the lost signal. Upon further investigation and diagnosis with my iPhone and other iPhone with a combination of chnage of sim between phones, resetting the network, hard reset and restoring a few times, it still persist. My analysis is that the iOS 5 >Settings>General>Cellular Data is the culprit. It does not have an option of switching between Edge and 3G (unlike the previous iOS lower than 5.0 or 5.0.1) It always stays on 3G. Now comes the trickiest part of my analysis. For networks having mid to low signal in areas, the updated dual antenna of the iPhone 4s switches automatically between 3G and normal signal. However, since it has no option to go down to Edge, it "automatically revert back to the original signal status". Sometimes from a very strong signal to a low signal area, it shows full bar of signal. but when you try to send an sms or make a call, it fails.
    Conclusion:
    I believe Apple has been digging deep with their softwate developers and checking the hardware of the iPhone 4s. And if my analysis is correct, they may have to incorporate the option of EDGE and 3G again.
    Temporary Solution:
    For low reception/signal areas, actually NONE... we have to wait for the update by Apple.
    So either use our iPhone 4s as an expensive iPod on poor reception/signal areas and transfer our sim cards temporarily to another phone or have your phone put to AIRPLANE MODE on-off again.

  • Gold 64GB iPhone 6

    I pre-ordered two iPhone 6s on 9/14. One was Space Gray 64GB and said delivery by 10/14, which is fine. The other was a Gold 64GB and said delivery by 9/19. Today is 9/22 and I don't have any updates on the Gold iPhone 6, and my credit card has yet to be charged. I went through the motions of ordering another Gold 64GB to see if it was now backordered, and it doesn't appear that it is. If the phone isn't backordered, why has it not shipped yet? I have asked customer service and the answer I got was basically a very vague, and I'm paraphrasing, "the phones will ship when they ship and your credit card will be charged at that time." I'd appreciate any more info someone from Verizon or another user in a similar situation can give.

        astomp82, I'm sorry for the delay with receiving your phone. Since your combined order includes two devices, one with a later ship date, the full order will not ship until the complete order can be fulfilled. I apologize for this inconvenience.
    AndreaS_VZW
    Follow us on Twitter @VZWSupport

  • My iPhone 4S says it cannot access the server to my yahoo mail account

    My iPhone 4S says it cannot. Access the server to my yahoo mail account, although it did until 2days ago

    Only by the use of third-party software, like this:
    http://www.ecamm.com/mac/phoneview/
    There is no supported way to do so. Be aware, photos synced to your phone were reduced in resolution for display on your phone. There is no way to recover their full resolution.
    You should be backing up your Mac. If you did so, you wouldn't be facing this issue.

  • My iphone keeps saying no sim when the sim is in it

    my iphone keeps saying no sim when the sim card is in

    There appear to be a number of posts about this topic.
    I have the same problem with my iPad 2. Worked fine for months, and now suddenly the iPad seems to 'loose' the SIM card and reports in the top-left corner it reads: 'No SIM'.
    Some findings from my side, while trying to address this:
    - when I switch to flight mode and then turn flight mode off again, the problems goes away, but comes back after a few minutes
    - same happens when I do a full power off.
    - I got a new SIM card from my provider. Same issue.
    - once you 'lost' the SIM card, it never comes back. (only after full power off - see above).
    - I contacted Apple Care today and they told me that this was not a known problem to them. Well, now it is :-)
    - Apple Care suggested to me to perform a full reset of the iPad. This is standard procedure and this was not a specific recommended action in relation to this problem. But suggest to perform this procedure anyway. In Settings > General > Reset > Reset All Settings. With this you do not loose your data, but you will need to configure your network/password settings, game center password, etc.
    For now this appears to have fixed it....
    Good luck,
    Anton

  • My 3gs won't take pics. It says it's full and to delete pics/vids, but I only have 30 pics and I've had tripple that plus vids and it took pics fine. How can I get my camera working again?

    My 3gs won't take pics. It says it's full and to delete pics/vids, but I only have 30 pics and I've had tripple that plus vids and it took pics fine. How can I get my camera working again?

    The number of pictures/videos on the device is irrelevant.  If there is not available space on the device, there is no way to take pictures.  Pictures, videos, music, iBooks, and any other media share the same space.
    Might be a good idea to manage the content on the device going forward so that there is always space available.
    Try not to fall into the misconception that many others experience, believing that the iPhone is a storage device, it simply is not.  Instead it is intended to be a mirror of the content on the computer.

  • Price for 64GB iphone 6 plus

    I currently have the samsung galaxy nexus and my contaract is up on the 20th of this month. I am looking to order the 64GB iphone 6 Plus but I am confused on the price of this device. On the website, it says that the 64 GB iphone 6 plus is $399 but when i spoke with a representative, he said that the 16GB is $399. When my uprade is fully available on the 20th, how much will the 64GB iphone 6 plus actually cost me and does it have to do with the phone or plan i currently have? Can someone help me out? Thanks.

    Thanks a lot zellerandy

Maybe you are looking for

  • How to display the count of a list item in Sharepoint Designer?

    How to display the count of a list item in Sharepoint Designer? please reply with the proper code line to add for this.

  • Error in content Server after installing folder_g component

    Hi, As soon as I install and enable the folder_g component, I get an error while restarting the content server, I am attaching the stack trace below... Info     12/21/09 11:13 AM 'Folders_g' component, version '2009_07_01 (build 49) ($Rev: 75409 $) b

  • Adobe Acrobat XI Pro won't launch

    I have installed Adobe Acrobat XI Pro as part of Creative Cloud. Right after downloading and installing Acrobat will launch just fine.  After a few days it will not launch and will only create a process in windows task manager. Any help please. I am

  • HTTP Session in Flex 2

    Hi, I want to know how to work with the HTTP Session object in Flex 2? Piece of code is really appreciable. Thanks, -Sameer

  • Dynamic url access in weblogic

    Hi All, I am currently working on moving my application from oc4j to weblogic92. On oc4j I keep all my xsd file in Apache/htdocs as a best practice and whenver I add a newly created xsd to this folder it can be accessable on the fly. Now, on weblogic