6500 classic missed call problem

Here´s another problem I have noticed:
If I miss a call, see who the caller was and "redial" them the sound is all messed up (both the sound from and to the caller). It sounds like the voices go through a bucket and waterfall at the same time. Its impossible to hear anything.
I then have to hang up and dial normally - then the sound is as normal.
Anyone who has the same experience and any suggestions towards fixing it?
Best Regards,
Kapers

If you don't have a security module (not many people do) then you will never need to use this option.
Security modules are expensive and are used by certain agencies that need heavily encrypted lines.

Similar Messages

  • Verizon is releasing another update tommorow: ED05 did not fix the miss call problem

    I got  two voice mails today that did not show as missed calls . I call Verizon technical support and ask to speak to a  manager. He told me that several people are still having miss call problems and to expect a new update august 1 which is tommorow. I told him this is the last straw , if this new update doesn't work for me, they are going to have to give me a different phone or release me from my contract. This is so frustrating.

    I called Verizon 2nd level tech support and they assured me there is NO ED06 update's said they haven't even finished rolling out ED05 yet. I think they just told you that to get you off the phone. I also have a Fascinate and have had problems and can't get them to replace my phone with a different device. I want the Droid Charge since it is the only other one that has the AMOLED screen that I originally chose the Fascinate for . They had a program that ended on July 28th the day that ED05 rolled out. They offered the Droidx, the Incredible 2, and the Droid Charge to replace the Fascinates that were having trouble. I had called to report my issues during this replacement program but was not told that it was going on and now they won't give me the Droid Charge because it has expired. I think since there are STILL issues-they need to bring this program back and allow us to get a different phone. I have been a customer of Verizon for 10 years and have 7 lines so I am REALLY disappointed that they can't work with me (or other customers ) especially since it is not something we did to the phone. It is a problem with either Verizon or Samsung. I don't know where to go from here but maybe if they hear enough from others that didn't have any success with ED05 they will start to replace them. I will probably go to a higher level to voice my concern. Let me know if anyone has any success getting a new device especially the Droid Charge.

  • Missed call problem with 5s

    Hi
    I bought new iPhone 5s yesterday. But I have small problem about missing call.
    When somebody called me and if I missed that call , I can see who called me at the phone tab and last call selection with red colour. And also I can see missed call on the notification center missed tabs.
    But missing calls 24 hours stayed notification center although I deleted last call selection in phone tab. Is it normal for ıos 7 ?
    Thanks for hand.

    Apple is not here. This is a user to user technical support forum. If you would like to provide feedback to Apple, do so here:
    Apple - Feedback
    Cheers,
    GB

  • 6500 classic - security settings problem

    I have Nokia 6500 classic and I have a little problem with it. When I go to the Security settings menu Security module settings is not active. When I push on it it tells me to Insert security module. Can someone explain to me what should I do because there is nothing in the users manual about the security options.
    Thank you in advance!!!

    If you don't have a security module (not many people do) then you will never need to use this option.
    Security modules are expensive and are used by certain agencies that need heavily encrypted lines.

  • Nokia 6500 classic Remote Simm Problem

    I have a nokia 616 car kit and when I try and pair the 6500 it goes into remote sim mode, where I want to use Hands free but cannot find anywhere to chnage this.
    Any help how to turn it off the nokia 6500?
    thanks in advance

    The speakers on the 6500's are rubbish. Have got 5 X 6500 slides and 1 X 6500 classic at work. All have had both the speakers replaced, a couple twice, plus other issues.

  • N97 Mini missed call problems

    Whenever I miss a call on my phone I get sent a text message, is it possible to turn this service off and if so, how do I do it?

    Are you sure it shows this when you miss a call ? or it is displayed when you are receiving the call ?
    Refer the Attachment..This is what I get on my Nokia 5800xm
    If you have the same.. Go to Menu-->Settings-->Calling-->Call-->Reject Call with Message..set to NO.
    Attachments:
    Display.jpg ‏41 KB

  • Is the "Wake Lock" app a good workaround for the Missed Calls/Texts issue?

    Back on Jun 18, at the beginning of the "Any One Having Missed Call Problem after ED04 ..." thread, wardcst24 posted that the Wake Lock app seemed to fix the issue of missing calls and that all calls now were received A-OK (not sure about texts).
    I think the train of thought is that after the Froyo / ED01 / ED04 updates, when the phone is in sleep mode it doesn't recognize some incoming calls and texts, but that this app keeps the CPU active enough to detect them when received.  There's probably a (minimal?) hit to memory / battery life / processing speed, but certainly acceptable vs missing calls.
    Has anyone had any luck with this or a similar app?  I can't test it since I'm still on 2.1 (never got around to upgrading to Froyo, sometimes it pays to be lazy . . . )..
    Here's the thread with the original Wake Lock reference:
    http://community.vzw.com/t5/Samsung-Fascinate/Any-One-Having-Missed-Call-Problem-After-ED04-Update-Post-Here/td-p/561962
    Joel

    It did work but when you would get a call wake lock would crash and if you didn't remember to reset it you would start missing calls again.
    It would consume 3% per hour
    I could not deal with having to remember to reset all the time so I sent my phone back to Samsung for the 5th time.
    There is another one that is said to work very well it is sofLocker
    https://market.android.com/details?id=otis8.softlocker
    I have not been able to test because Samsung has my phone for time #5

  • 6700 slide missed call & message alerts problem

    If there is a missed call or message when the keypad is locked I dont see any lights blinking or D-Pad lights blinking. Is there a way that phone gives us a alert on missed call or messages as how it is in 6700 classic (D-Pad lights blinking untill we take a look at the alert)
    Any suggestions
    Ferdin

    I've finally got an ap called Miss Calls Reminder - this is for missed calls and texts.  It is on the Ovi store.  You have to ID your phone etc., then it asks you to send to phone.  The problem is when you get a text with a link for the ap from Ovi and click on it it says it's not available for your model.  Instead go the webpage which is mentioned Tektronic - you will see the ap, download it to your pc.  It's not free - think it's around £4.00.  Once you've downloaded to your pc, then plug your phone in - can't remember what I did next - something to do with Nokia Application Installer on Nokia PC Suite.  Anyway you will see the logo - so transfer it from pc to phone.  Then you will have option for a trial or buy.  Took me three goes to buy it.  When you have it on your phone under menu, applications you then enable it and change the settings.  What a god send.  I nearly missed a really important job 'cos I didn't here text coming in and didn't check phone and had 5 minutes to accept the job.  So you can change the settings to get a visual reminder and an alert tone for calls and texts, or just texts.  You you can set it to say 15mins and then set the warning tone as long as you want.

  • I got problem when trying to contact my iphone 4 using facetime,it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.

    i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

    i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

  • 6500 Classic Problems

    Hello everyone!
    My 6500 classic keeps turing its self off - usually during a call - for no aparant reason. It also keeps on losing reception when I'm not using it and then starts searching for reception again until it finds it?
    It will do this once or twice a minute and then will work fine for hours on end before deciding to go a bit crazy again!
    I have recently had the screen replaced after it cracked (without having actually been touched) but apart from that the phone has always worked fine and it has been treated well.
    If you have any ideas about how I might fix it or what might be wrong with it I would greatly appreciate hearing from you!
    Cheers
    Jon

    yes this is excatly my thought your better of going to a nokia care centre, than some guy that does unwarrantied work,this is why i asked where you got the screen done ,so its a trip to a nokia care centre to be fixed properly
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Problem 6500 Classic. Camera & Flash not Syncroniz...

    On my 6500 Classic 1 week old i have a problem,in camera mode the flash does not seem to be syncronized with the camera, once the image is captured the image is dark apart from a small strip at the right side of the screen. I also cannot activtae night mode or image sequence.
    Any help would be appreciated
    Thanks
    Mrp

    The flash on my 6500 is working fine. but I may be able to help if you can give me the following info:
    (1st make sure your finger is not covering the flash when taking pictures )
    1. Software version of your phone (press *#0000#)
    2. Image quality & image size settings (go to camera>options>settings)
    3. When you see flash is not syn, is the flash in Auto or On or both? (see icon or option>flash)
    4. Does the flash always not syn or sometimes?
    For night mode or image sequence, try turn the flash off.

  • Sound muting problem after missed calls

    Using Skype 4.9, but confirmed with 4.7 as well.
    Android 4.2.2 JB, standard theme.
    After a missed call, my FM radio stops working, and also I find all other sounds quieter byt more than 40-50%. No volume control app helps (tried many), the volumes don't seem changed. The FM radio apparently finds stations etc. but no sound. As if it is muted, and all other sounds seem to be affected by some more master volume no app could affect.
    This whole mess is fixed when restarting the phone, or when I make another call to Sound test service (or other contact) - just establishing a call is enough to fix the issue. This is not always a solution for variety of reasons.
    Also letting skype exit (after signout) completely fixes the issue. But this "exiting" takes hours most of the time - its VideMonitor service stays for hours after signout, sometimes days. Unacceptable.
    This is Very frustrating to the point i stopped using skype until this is fixed.
    It seems Skype doesn't restore some volumes/mute after a missed call.
    The mentioned workarounds are not always viable, especially when I'm away from Wifi range. Is there another workaround, or better, a fix, when I miss a call, skype should restore sound volumes and any muted channels (fm radio).
    Thanks.

    The very same problem on Huawei Ascend G7...
    After missed call skype turns off all the sounds in the phone including alarm.
    I did late on work today because of it...
    Why nobody from the developers don't take this seriosly and to clear up that serious issue..???

  • I got an internet connection on my phone. After getting the internet connection, I was unable to make a call or check the missed calls that I got. Please help me resolve this problem.

    I got an internet connection on my phone. After getting the internet connection, I was unable to make a call or check the missed calls that I got. Please help me resolve this problem.

  • OS 3.0 problem, missed call

    Big problem vith new 3.0, to match missed call !!!

    I got it working again. under settings->general->bluetooth. I selected each device on the list and said forget device. then I plugged the iphone and headset into the charger that was plugged into the computer. it discovered and I have turned the headset on and off and it's getting paired up every time.

  • Problem after missed call

    Dear,
    When some one call me and I can't answer. There could be a missed call. However, my phone displays the picture above and I can not do anything with the phone. So i need to push the Power button to restar phone.
    Please help me, I try to restore my phone 3 times, but the problem is still happenned.
    Thanks & Best regard

    wardcst24 wrote:
    I Have Sent my Phone in 4 Times and they are having me send it in for # 5
    They sent a NIB Phone last Time And I Activated it and with in 2 Hours it was Missing calls.
    The Calls go to Voice mail after the 5th ring when I called and my Phone Does not Ring.
    Until you hit power Button to Wake it up
    If you are Having This Problem Please Post So we can see How Common and How many are having this Issue.
    Thanks
    This person tells the problem better than I So hope they don't mind me putting this in.
    Ever since the software upgrade my phone sometimes does not receive incoming calls when it's in sleep mode. It doesn't wake up, ring, buzz or anything. It doesn't record the missed calls in the Call Log. And if the caller left a voice message, it doesn't show the voice mail puzzle piece in the unlock screen.
    This afternoon my wife tried calling me while my phone was asleep (screen saver on , but not powered off).
    She was using her ATT wireless. We were in the same room, and she had here speaker on. So I could hear
    her phone dialing and my line ringing. Nonetheless, there was no response from my phone for several rings. So I pressed the right side button, woke up my phone and unlock it, then it began to ring!
    Later I tried calling my phone from my work phone while it was sleeping. It woke by itself up and rang immediately. This was an ATT land line.
    What is going on?
    I looked through every menu I could find to see if there is a setting I need to change. I can't find anything relating to this problem. Could it be an issue with Verizon vs ATT Wireless?
    I would greatly appreciate any help!

Maybe you are looking for

  • Vaildating File name with the data in the file using sender file adapter

    Hi, Below is the scenario 1)       Pick up files from a FTP server, the file name is dynamic, how do I put dynamic name in sender file adapter? 2)       Determine if the user correctly named the file based on data in the file. a.       File naming st

  • Remove/add panel to applet speedy in 1.3.x; painfully slow in 1.4.1/2.beta

    The following code (which was working for years, including even 1.3.x) suddenly fails in 1.4.1 and 1.4.2beta on both win 2000 and win xp DESCRIPTION OF PROBLEM : An applet consists of 2 components: a contents panel and a button. The contents panel co

  • Drag and drop data object  not working in jdev 11.1.1.7

    I am trying to do quote process lab and faced this issue. When defining the user task parameter in jdev 11.1.1.7 i am not able to drag and drop the data object in parameter list section.

  • Printing from SJSE 8 on Solaris?

    How is one printing from anywhere in SJSE 8? For example I would like to print the source code from one of the document windows. When I bring up the print dialog, the print service name is displayed as "destination" and status as "Not accepting jobs"

  • BP User Defined Attributes -- Error

    Hi experts!! The customer i am working on needed some extra fields on the Accounts screen page, so i defined all User Defiened Attributes from 1 to 10 and added them from the Node MARKETING of the component BP_HEAD. When i try to save the Account (af