6500 classic - security settings problem

I have Nokia 6500 classic and I have a little problem with it. When I go to the Security settings menu Security module settings is not active. When I push on it it tells me to Insert security module. Can someone explain to me what should I do because there is nothing in the users manual about the security options.
Thank you in advance!!!

If you don't have a security module (not many people do) then you will never need to use this option.
Security modules are expensive and are used by certain agencies that need heavily encrypted lines.

Similar Messages

  • Nokia 6500 classic Remote Simm Problem

    I have a nokia 616 car kit and when I try and pair the 6500 it goes into remote sim mode, where I want to use Hands free but cannot find anywhere to chnage this.
    Any help how to turn it off the nokia 6500?
    thanks in advance

    The speakers on the 6500's are rubbish. Have got 5 X 6500 slides and 1 X 6500 classic at work. All have had both the speakers replaced, a couple twice, plus other issues.

  • Security Settings Problem w/ WRT54GS

    I recently had to reset my router, and after a few initial problems with setting everything up again (had to change the routers default IP address from 192.168.1.1 to 192.168.1.2 to get it to work)... I've now hit another roadblock I can't figure out.
    Every time I activate any kind of wireless security, (I've tried both WEP and WPA) I lose access to the router and the internet.
    I end up having to reset the router and start all over again just to regain access to the manual configuration interface... so I can then change the default IP address to 192.168.1.2... so I can get on the internet again.
    I don't recall having this much trouble last time I set this thing up... I need some help please.
    Thanks!
    Dell XPS running Windows XP (SP3)

    Disconnect the modem power cable and log on to the router...You need to change the router IP to 192.168.2.1 instead of 192.168.1.2...After that power cycle your router for 1 minute...Open the set up page of your router using the new IP(192.168.2.1)...Click on Wireless tab...change the Network Name (SSID) to a new name...change the channel to 11...and click on Save Settings...
    To enable Secuirity follow this and then try to connect to the Wireless Network on the Wireless Computer...

  • 6500 classic missed call problem

    Here´s another problem I have noticed:
    If I miss a call, see who the caller was and "redial" them the sound is all messed up (both the sound from and to the caller). It sounds like the voices go through a bucket and waterfall at the same time. Its impossible to hear anything.
    I then have to hang up and dial normally - then the sound is as normal.
    Anyone who has the same experience and any suggestions towards fixing it?
    Best Regards,
    Kapers

    If you don't have a security module (not many people do) then you will never need to use this option.
    Security modules are expensive and are used by certain agencies that need heavily encrypted lines.

  • Problem 6500 Classic. Camera & Flash not Syncroniz...

    On my 6500 Classic 1 week old i have a problem,in camera mode the flash does not seem to be syncronized with the camera, once the image is captured the image is dark apart from a small strip at the right side of the screen. I also cannot activtae night mode or image sequence.
    Any help would be appreciated
    Thanks
    Mrp

    The flash on my 6500 is working fine. but I may be able to help if you can give me the following info:
    (1st make sure your finger is not covering the flash when taking pictures )
    1. Software version of your phone (press *#0000#)
    2. Image quality & image size settings (go to camera>options>settings)
    3. When you see flash is not syn, is the flash in Auto or On or both? (see icon or option>flash)
    4. Does the flash always not syn or sometimes?
    For night mode or image sequence, try turn the flash off.

  • Problem with email setup in iPhone after changing to secure settings

    When changing account settings to use Verizon's new secure email settings, my iPhone keeps giving error " Can not get Mail, the mail server incoming.verizon.net is not responding.
    I am using port 995 with SSL as instructed. Switching back to the standard port 110 with no SSL works fine.
    Outgoing works fine with port 465 and SSL.
    Also, same secure settings on Outlook 2010 work perfectly fine.
    Anyone having this issue?
    Solved!
    Go to Solution.

    gusverde wrote:
    When changing account settings to use Verizon's new secure email settings, my iPhone keeps giving error " Can not get Mail, the mail server incoming.verizon.net is not responding.
    I am using port 995 with SSL as instructed. Switching back to the standard port 110 with no SSL works fine.
    Outgoing works fine with port 465 and SSL.
    Also, same secure settings on Outlook 2010 work perfectly fine.
    Anyone having this issue?
    A few other people have posted that after making the changes they had to reboot their iPhone/iPad in order for it to connect again. Have you tried restarting?
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • Problem with security settings

    Dear all,
    We have the problem that we create a PDF with CS3 (compatible down to Acrobat Reader 5) with no security settings.
    This PDF is sent out to a colleague who's only having an Acrobat Reader installed on his computer. When he's checking the security settings, there are several security settings done. He urgently needs to comment things.
    Please help. We are desperately seeking
    Thanks a lot in advance!!!
    Birgit

    Hi Bernd,
    Thanks for the quick reply! And: of course there is no Acrobat Reader As everyone around me calls it like this I just wrote w/o thinking about it. Sorry!
    I passed your answer to my colleagues searching for a solution. Obviously they made the right settings but the other side using the Reader had a too old version in which commenting was not possible, yet.
    Hmm, all this hustle for no reason...
    Anyway: thank you very much for helping!
    Take care,
    Birgit

  • Problem with SQL Security Settings

    I've run into an odd problem since moving to ColdFusion 8
    Enterprise Edition. Any text string submitted to an action page
    through a form will return an error ("Executing the SQL statement
    is not allowed.") if it contains text that conforms to a disallowed
    SQL command. For example, I've turned off the "create" as an
    allowed SQL statement in my datasources. If I submit a form that
    includes the following text, "Go back to the beginning of the
    document; create a title," I get the error message. This occurs in
    richtext form fields as well as in standard input form fields. If I
    turn off the security setting so that "create" is an allowed SQL
    command, the error goes away and (fortunately) no table is created.
    It appears that ColdFusion is checking for the presence of
    illegal commands even in text strings that are delimited by single
    quotes in a query -- and even when those text strings wouldn't
    actually do anything to a database.
    Has anyone else run into this? Am I missing a setting on my
    Administrator? Or am I missing something obvious? I'm not pleased
    about the options I have at this point -- turning off some of my
    security settings or allowing errors to occur and telling people
    not to use semicolons as a workaround.
    Thanks for any help you might offer.
    Mike

    Mike Palmquist wrote:
    > Thanks for any help you might offer.
    >
    > Mike
    >
    Are you using <cfqueryparam...> tags? It sounds like
    you are directly
    passing the form text into the SQL statement. If this is what
    you are
    doing, then you are probably getting the expected, safest
    results. If
    you do not use the <cfqueryparam...> tag to tell
    ColdFusion and your
    database that this is a bound parameter then it is possible
    that the
    text is expected to contain SQL code and it will be parsed as
    such.
    To give clearer advice it would be helpful to see an example
    of your code.

  • I downloaded a security update & when i tried to open firefox afterwards ,I couldn't open it. have a DEP settings problem i tried to change my computer's DEP settings but was notified i couldnt for firefox,what should I do?

    I was prompted to downloaded a security update & so I did. when i tried to open firefox afterwards ,I couldn’t open it. My computer told me I had a DEP settings problem.I tried to change my computer's DEP settings but was notified i couldn't for firefox. I tried the uninstall & then install Firefox again route (could not even do it in safe mode since i can't even open firefox)but still had the same problem afterwards. What should I do?

    Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible.
    *Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data because all profile folders will be removed.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • I am facing with the following problem whenever i start my laptop.Insecure Startup Item disabled."/Library/StartupItems/MobileBrServ" has not been started because it does not have the proper security settings.

    I am facing with the following problem whenever i start my laptop(Macbook Air,OSX 10.9.4).
    Insecure Startup Item disabled.“/Library/StartupItems/MobileBrServ” has not been started because it does not have the proper security settings.

    Open /Library/StartupItems/ folder and locate the file then remove it. You have installed incompatible software. If you don't believe this is correct, then determine what software installed the item and contact the developer for help.

  • 6500 Classic Problems

    Hello everyone!
    My 6500 classic keeps turing its self off - usually during a call - for no aparant reason. It also keeps on losing reception when I'm not using it and then starts searching for reception again until it finds it?
    It will do this once or twice a minute and then will work fine for hours on end before deciding to go a bit crazy again!
    I have recently had the screen replaced after it cracked (without having actually been touched) but apart from that the phone has always worked fine and it has been treated well.
    If you have any ideas about how I might fix it or what might be wrong with it I would greatly appreciate hearing from you!
    Cheers
    Jon

    yes this is excatly my thought your better of going to a nokia care centre, than some guy that does unwarrantied work,this is why i asked where you got the screen done ,so its a trip to a nokia care centre to be fixed properly
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Problems with security settings and itunes updates! What do I do?

    So I preordered a cd that became available today. When I went to download it, a message came up saying that I need to download the latest version of itunes (7.-[can't remember the last part]but anyways) so I clicked on the upgrade icon. I then got a message saying "your current security settings do not allow this." No matter what I do with my security settings I keep getting this same message! I have windows xp, please help I would really really like to be able to download and listen to the cd I've paid for! Thank you in advance!

    Maybe you aren't on an admin account in Windows? If not, create/logon to one and install it.
    Or maybe you just need to go to the website and download it instead of updating through iTunes. Go here:
    http://www.apple.com/itunes/download/

  • 6500 classic message security

    I've just bought a 6500 classic but cannot find a way to password protect the message area of the phone. At the moment anyone can pick up the phone and access my personal messages. I've come from a motorola handset where this was relatively simple - is it possible on the 6500 classic?

    Not possible on series 40 nokia phones like the 6500.

  • How do I re-set my security settings to acommodate the problem below

    I am trying to enter a link in my article body copy for a URL and I get this message(below) when I try to copy and paste. I need to reset Firefox Security level to allow me to do same.
    "Your browser security settings don't permit the editor to automatically execute copying operations. Please use the keyboard for that (Ctrl/Cmd+C)."
    Please advise.
    Thanks,
    Frank McDonald

    See this Discussion

  • Problem with security settings on wireless network

    I swapped out an old D-link router for a new D-link gigabit router and am now unable to get the security settings to stay on WPA2. I can set it okay, but the padlock doesn't show up next to the network name and when I go back to system preferences it has reverted to "none" under the security settings. Any suggestions??

    Hi Bernd,
    Thanks for the quick reply! And: of course there is no Acrobat Reader As everyone around me calls it like this I just wrote w/o thinking about it. Sorry!
    I passed your answer to my colleagues searching for a solution. Obviously they made the right settings but the other side using the Reader had a too old version in which commenting was not possible, yet.
    Hmm, all this hustle for no reason...
    Anyway: thank you very much for helping!
    Take care,
    Birgit

Maybe you are looking for

  • Caller ID not working on calls with an extention

    Hi, If i have a contact (john) with a number 212-555-1212 and he calls, the phone displays John.  cool.  If i have 212-555-1212;1234 where the ; is a wait command and the 1234 is the work phone extention so i can press it and it will auto send.... an

  • Problem installing CS2 on Windows 7

    I downloaded and attempted to install CS2 from the Adobe website and have been unsuccessful in getting past the "install disc 2" message. I spoke with a rep via chat and they referred me here. I have followed the directions that were included with th

  • Why am I not able to "disable caller id"...the option is not available on my phone.

    It seems that others with the iPhone have many more options under the "phone" toggle. The only fields that I have are: My Number, TTY, Change Voicemail Password and International Assist. I believe that I should be able to "disable caller id". Am I co

  • Hook iPod to car speakers.

    I've never done this before, but my friend is trying to get his iPod hooked up to his car speakers. If it helps, the car in question is a 2006 Toyota Corolla LE. There's a multi-disc CD player. ~ Thanks in advance.

  • Workflow Attribute Names

    Answer me this... When you create a workflow in the Workflow builder, one is FORCED to have the item level and function level attribute internal names to be all uppercase. Fine. So I make a work attr called MY.ATTR.NAME. But then, in a PL/SQL functio