6500-E with SUP720 compatibility with 10g module

I have 6509-E chasis with supervisor VS-S720-10G.
I need to add a new WS-X6708-10G-3C= module to this same chasis.
As per the cisco datasheet both the cards and the supervisor are compatible, just need to confirm this.

WS-X6708-10G-3C will never be compatible with Sup2T.  The Sup2T has DFC4/PFC4 and the card has DFC3/PFC3 card which cannot be upgraded.

Similar Messages

  • Cisco 6509 with 10G Module

    Hello,
    We have Cisco 6509 Core Switch with following details & we need to install WS-X6716-10T-3C module in int.
    Can some body advise which slot number i should use in 6509 ?
    Do i need to upgrade supervisor engine IOS for this ?
    Is it hot swapable module & can i install this module in production ?
     6509_CORE#sh ver
    Cisco IOS Software, s72033_rp Software (s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(33)SXI6, RELEASE SOFTWARE (fc4)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2011 by Cisco Systems, Inc.
    Compiled Mon 28-Mar-11 12:09 by prod_rel_team
    ROM: System Bootstrap, Version 12.2(17r)SX7, RELEASE SOFTWARE (fc1)
    6509_CORE uptime is 2 years, 30 weeks, 1 day, 3 hours, 13 minutes
    Uptime for this control processor is 2 years, 30 weeks, 1 day, 1 hour, 44 minutes
    Time since AUB_CORE switched to active is 2 years, 30 weeks, 1 day, 1 hour, 44 minutes
    System returned to ROM by  power cycle at 11:55:23 UTC Wed Apr 27 2011 (SP by power-on)
    System restarted at 11:16:22 AST Sun Jun 26 2011
    System image file is "sup-bootdisk:s72033-adventerprisek9_wan-mz.122-33.SXI6.bin"
    Last reload reason: Reload Command
    cisco WS-C6509-E (R7000) processor (revision 1.5) with 983008K/65536K bytes of memory.
    Processor board ID SMC1426001S
    SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
    Last reset from s/w reset
    4294967295 Ethernet interfaces
    33 Virtual Ethernet interfaces
    150 Gigabit Ethernet interfaces
    100 Ten Gigabit Ethernet interfaces
    1917K bytes of non-volatile configuration memory.
    8192K bytes of packet buffer memory.
    65536K bytes of Flash internal SIMM (Sector size 512K).
    Configuration register is 0x2102
    6509_CORE#sh module
    Mod Ports Card Type                              Model              Serial No.
      1   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP       SAL1430P2QU
      2   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX     SAL1429N6XB
      3   16  CEF720 16 port 10GE                    WS-X6716-10GE      SAL1430NYUE
      4   16  CEF720 16 port 10GE                    WS-X6716-10GE      SAL1430NX5A
      5    5  Supervisor Engine 720 10GE (Active)    VS-S720-10G        SAL1430NUJE
      7   16  CEF720 16 port 10GE                    WS-X6716-10GE      SAL1645RJTF
    Mod MAC addresses                       Hw    Fw           Sw           Status
      1  d0d0.fd62.d9e0 to d0d0.fd62.d9f7   4.4   12.2(18r)S1  12.2(33)SXI6 Ok
      2  c84c.75b8.596c to c84c.75b8.599b   3.4   12.2(18r)S1  12.2(33)SXI6 Ok
      3  001f.6cac.11d0 to 001f.6cac.11df   1.0   12.2(18r)S1  12.2(33)SXI6 Ok
      4  5475.d06e.0988 to 5475.d06e.0997   1.0   12.2(18r)S1  12.2(33)SXI6 Ok
      5  001e.4a7f.3068 to 001e.4a7f.306f   3.2   8.5(4)       12.2(33)SXI6 Ok
      7  fc99.4736.2d80 to fc99.4736.2d8f   1.1   12.2(18r)S1  12.2(33)SXI6 Ok
    Mod  Sub-Module                  Model              Serial       Hw     Status
      1  Distributed Forwarding Card WS-F6700-DFC3C     SAL1430P282  1.4    Ok
      2  Centralized Forwarding Card WS-F6700-CFC       SAL1430NRAS  4.1    Ok
      3  Distributed Forwarding Card WS-F6700-DFC3C     SAL1430P26L  1.4    Ok
      4  Distributed Forwarding Card WS-F6700-DFC3C     SAL1430NZRM  1.4    Ok
      5  Policy Feature Card 3       VS-F6K-PFC3C       SAL1429N6B7  1.1    Ok
      5  MSFC3 Daughterboard         VS-F6K-MSFC3       SAL1430NN3R  5.0    Ok
      7  Distributed Forwarding Card WS-F6700-DFC3C     SAL1644RAZF  1.5    Ok
    Mod  Online Diag Status
      1  Pass
      2  Pass
      3  Pass
      4  Pass
      5  Pass
      7  Pass

    Hello cmarva,
    I got power requirement from core switch:
    6509_CORE#show power
    system power redundancy mode = redundant
    system power total =     3795.12 Watts (90.36 Amps @ 42V)
    system power used =      2748.06 Watts (65.43 Amps @ 42V)
    system power available = 1047.06 Watts (24.93 Amps @ 42V)
                            Power-Capacity PS-Fan Output Oper
    PS   Type               Watts   A @42V Status Status State
    1    WS-CAC-4000W-INT   3795.12 90.36  OK     OK     on
    2    WS-CAC-4000W-INT   3795.12 90.36  OK     OK     on
                            Pwr-Allocated  Oper
    Fan  Type               Watts   A @42V State
    1    WS-C6509-E-FAN      210.00  5.00  OK
                            Pwr-Requested  Pwr-Allocated  Admin Oper
    Slot Card-Type          Watts   A @42V Watts   A @42V State State
    1    WS-X6724-SFP        162.96  3.88   162.96  3.88  on    on
    2    WS-X6748-GE-TX      325.50  7.75   325.50  7.75  on    on
    3    WS-X6716-10GE       457.80 10.90   457.80 10.90  on    on
    4    WS-X6716-10GE       457.80 10.90   457.80 10.90  on    on
    5    VS-S720-10G         338.10  8.05   338.10  8.05  on    on
    6    (Redundant Sup)       -     -      338.10  8.05  -     -
    7    WS-X6716-10GE       457.80 10.90   457.80 10.90  on    on
    system auxiliary power mode = off
    system auxiliary power redundancy operationally = non-redundant
    system primary connector power limit =   10920.00 Watts (260.00 Amps @ 42V)
    system auxiliary connector power limit = 10500.00 Watts (250.00 Amps @ 42V)
    system primary power used =              2748.06 Watts (65.43 Amps @ 42V)
    system auxiliary power used =            0 Watt
    As per Cisco document i require this power WS-X6716-10T-3C: 509.3W (12.1A @ 42V) & from output available power is system power available = 1047.06 Watts (24.93 Amps @ 42V)
    Looks like im good to go. Can you verify please ?
    http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-6500-series-switches/product_data_sheet09186a00801dce34.html
    Regards,

  • Compatibility with SFP modules

    Hi,
    I have a query, I need connect a Switch 6500 with a switch HP, the switch HP has a HP X242 10 SFP module and need connect to the switch 6500 with a module CVR-X2-SFP10G. I need to know if this modules are compatible.
    Thanks for the help.

    According to the 6500 module installation manual, and a Q&A document,
    "Q. What is the difference between WS-X6716-10G-3C and WS-X6716-10G-3CXL?
    A. Both modules offer 16 ports of 10 Gigabit Ethernet and share the same base board, WS-X6716-10GE. WS-X6716-10G-3C comes with distributed forwarding card 3C (WS-F6700-DFC3C), and WS-X6716-10G-3CXL comes with distributed forwarding card 3CXL (WS-F6700-DFC3CXL)."
    "A sticker is placed on the module faceplate identifying it as either a WS-X6816-10G-2T or WS-X6816-10G-2TXL depending on whether a WS-F6K-DFC4-E or WS-F6K-DFC4-EXL daughter card is installed on the module."
    "Not all 10-GB transceiver versions may be supported on your module. Refer to your software release notes to determine if a specific 10-GB transceiver is supported on your module."
    It seems you will need to determine which daughter card or forwarding card is installed in the base WS-C6716-10GE board; then refer to the software release notes for transceiver compatibility.  The longer reach SFP+ copper or active optical interfaces draw more power, thus they may not be supported with the X2 to SFP+ converter.  

  • 6500 with ASA module

    Hello guys,
    I'm designing small-medium branch office (from 100 users scalable up to 500).
    My idea was to build this around a pair of 6506-E switches (as collapsed core, utilizing VSS), then at each floor (1 floor = 100 users) have a stack of 3750 switches.
    Now, to my question, I want a pair of security appliances, one per each breakout. I was looking at a possibility of putting ASA module into each 6500.
    Is it possible, to use 10G X2 module, which are build into 6500's SUP as WAN interface and direct everything it receives on those ports directly into ASA? (I want to have all traffic which will come to the 6500 via SUP's X2 modules to pass through ASA before any further action will be taken).
    As fair as I know in order to use VSS together with ASA modules in active/active mode (I will load balance through uplinks on both 6500) I need to use SUP 720-10G, am I right?
    Thanks in advance for you insights.
    Michal

    Thanks guys. Appreciate your feedback!
    I will most likely go  for the option "Existing ASA 5540 with IPS module" . I hope the IPS module does not limit any bandwidth capability or processing issue of the ASA. My current throughput is 250 Mbps bidirectional.
    After looking at the IPS option I am sloghly confused which one I need. Cisco website say:
    "...adding the broad range of intrusion prevention and advanced antiworm services delivered by the IPS modules via the AIP SSM and AIP SSC, or the comprehensive malware protection and content security services enabled by the CSC SSM."
    Do I need SSM only or both SSM and SSC or CSC SSM? How many module cana be installed on 5540?
    Fawad

  • Photoshop cs6 crashes with "appcrash - module ig75icd64.dll; no problem for a local admin user however. i've tried giving specified user full access to photoshop.exe and set it to Win XP compatibility. how do i fix this without giving user local admin acc

    photoshop cs6 crashes with "appcrash - module ig75icd64.dll; no problem for a local admin user however. i've tried giving specified user full access to photoshop.exe and set it to Win XP compatibility. how do i fix this without giving user local admin access?

    Danny,
    Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
    That field is not for attempting to fit your entire question in there.
    Please keep this in mind next time you post.  Thank you.

  • ODP 11 compatibility with 10g

    Can anyone comment on whether ODAC 11 (albeit still in beta) is likely to raise compatibility issues with apps created with ODAC 10 against Database 10g?
    At one of the recent Oracle Develop events, I recall being told that 11 beta was stable enough to be used straight away but I'm not sure if anything was said about backward compatibility.
    Graham Keitch
    www.oracleonwindows.co.uk

    Hello:
    >
    I know that APEX is not 'certified' to work with 10g, but is the combination of 10g Express and Application Express "viable" ?
    >
    Where did you get this information from ?
    Please read through APEX 3.1.2 requirements at
    http://download.oracle.com/docs/cd/E10513_01/doc/install.310/e10496/pre_require.htm#i1009513
    Varad
    Edited by: varad acharya on Jan 28, 2009 12:25 PM

  • Compatibility with 10g Express

    Greetings all,
    I know that APEX is not 'certified' to work with 10g, but is the combination of 10g Express and Application Express "viable" ?
    I have a situation that requires a pretty quick turn-around and while I could experiment to find this answer, in this case it may be faster just to ask.
    Oh, and I know I will lose the interactive-reporting ability.

    Hello:
    >
    I know that APEX is not 'certified' to work with 10g, but is the combination of 10g Express and Application Express "viable" ?
    >
    Where did you get this information from ?
    Please read through APEX 3.1.2 requirements at
    http://download.oracle.com/docs/cd/E10513_01/doc/install.310/e10496/pre_require.htm#i1009513
    Varad
    Edited by: varad acharya on Jan 28, 2009 12:25 PM

  • 11g database compatible with 10g ASM?

    Hi all,
    I have one server with Oracle 10g database and ASM installed. Now I need to install a new database on 11g version. Know you if my new 11g database can use the 10g ASM? Or I need to create a new ASM in 11g too?
    Thanks in advance,
    Jordi

    PLease look at the following link. The 11g Database is indeed going to work with 10g asm but the features available will vary depending on the version compatibility.
    http://download.oracle.com/docs/cd/B28359_01/server.111/b31107/asmdiskgrps.htm#CHDJDDFG
    HTH
    Aman....

  • 6500's with 10GE mod

    I'm about to do a data center migration and I'm replacing all of my core switching. My plan is two 6509's in the core and 4948-10GE's at the access layer to provide 10gig back to the core. I'm a little confused on the fiber connectors available on the 6500 modules. Are the 4948-10GE's able to connect to the 6500's using the WS-X6704-10GE module?
    Thanks for the help.
    Dennis

    Hi Dennis,
    The Cisco 4948-10GE is shipping out with X2-10GB-LR which is 10 Km on SMF, the WS-X6704-10GE is shippped out with XenPAK 10 GE Module. You can establish the optical connectivity between the 10GE-X2 and the XenPAK Module.
    You can also refer to the attached ZIP File that contains a PDF on Cisco Catalyst 4900 Series Switch.
    Thanks and Regards
    Sriharshaa Prabhakar
    Technical Specialist - Networking & Security
    Enterprise Services
    Wipro Infotech
    Mission Road
    Bangalore
    Email:[email protected]

  • Pairing 6500 classic with Tomtom 520??

    I'm having problems pairing my 6500 classic with my new Tomtom 520. I know I should have checked before I bought it, but my 6500 is not in the list of compatable phones to use the features of Tomtom. Which of the other phones on their list is a similar match, which should get me going,
    Thanks in anticipation, Mike.
    http://www.tomtom.com/phones/compatibility/?intProduct=19

    21-Feb-2008 08:27 PM
    mikrt wrote:
    I'm having problems pairing my 6500 classic with my new Tomtom 520. I know I should have checked before I bought it, but my 6500 is not in the list of compatable phones to use the features of Tomtom. Which of the other phones on their list is a similar match, which should get me going,
    Thanks in anticipation, Mike.
    http://www.tomtom.com/phones/compatibility/?intProduct=19
    Just read the original post and realised it wasn't too clear what I was after.
    When attempting to pair the 6500 & tomtom, tomtom throws up a list of phones (the compatable ones)and asks me to select the phone. I think 6500 is a symbian 40, but I'm not sure which of the phones in that list is, or if any others in that list if selected would work,
    Thanks,
    Mike.

  • I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area.  I have stayed with 10G since the beginning.  Most months I don't use the 10G.  Verizon has no problem with me paying for Data I don't

    I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area.  I have stayed with 10G since the beginning.  Most months I don't use the 10G.  Verizon has no problem with me paying for Data I don't use.  This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages.  I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time.  Lots of charges.....But I'm am getting no help.  Not even an offer of a payment plan to help me out.  I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!!     Does anybody have any suggestions on how to deal with them?   We are not wealthy....or I would just pay this and walk away......

    There is a big misconception in what customers believe a cell carrier is obligated to do.
    You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
    Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
    There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
    Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
    Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
    Good Luck

  • How do I use Cisco MARS to monitor two ASA (active/stby) with IPS modules?

    Hi
    The two ASA with IPS modules are in active/standby mode. When I try to add both the two IP (active/standby) into the MARS, the MARS will complain duplicated hostnames.
    How to setup MARS to monitor ASA with IPS with active standby topology?
    Thanks!

    Hi,
    The fundamental problem with this scenario is that you have non-failover capable modules in a failover chassis - think of the ASA failover pair as one device and the IPS modules as two completely separate devices.
    Then, as already mentioned, add only the primary ASA. (The secondary will never be passing traffic in standby mode so it's not actually needed in MARS) Then, with the first IPS module you can add it as a module of the ASA or as a standalone device (MARS doesn't care). With the second IPS module the only option is to add it as a separate device anyway.
    In a failover scenario the ASA's swap IP's but the IPS's don't so whereas you'll only ever get messages from the active ASA you'll get messages from both IPS IP's depending on which one happens to be in the active ASA at the time.
    Don't forget that you have to manually replicate all IPS configuration every time you make a change.
    HTH
    Andrew.

  • Using a different user(other than default PI user) with adapter module

    Hi,
    We are having a custom adapter module built to interact with a Hardware Security Module(HSM). This custom adapter module by default uses a PI user configured in the system. However, we are not able to pass commands to HSM because of insufficient authorizations to this PI user. Now, we do not exactly know the permissions required for the user to access HSM. We have asked the HSM support team about the same. However, I wanted to explore the possibility of using a different PI user to work with the adapter module and eventually pass commands to HSM.
    We have an admin user configured which has all the necessary authorizations. Is it possible to use this admin user created on PI system to work with adapter module so that it passes commands to HSM?
    Thanks,
    Ravi Desai

    We have given the necessary authorizations to PI user.

  • Basic functionality and few steps for how to integrate with PS module

    HI Experts,
    I am very new to C-projects .
    So cn anybody put some light on what c-project is and how cn we integrate wth PS module step by step.
    Thanks In adv.
    Regards
    Ashis

    Hi,
    Please find some details about cProject below.
    Collaboration Projects (cProjects):
    SAP offers SAP Collaborative Project Management (cProjects). cProjects covers the entire range of project management activities in development and consultancy projects, from planning to implementation to project completion.
    Value Proposition
    cProjects supports organizations to grow their project management excellence by
    a) providing solid standalone project management core support
    b) offering a wide range of integration options
    Key Benefits Include:
    a) As single source of truth cProjects provides company-wide transparency of all projects.
    b) Complete functional support for project planning, execution and controlling
    c) Project structuring and scheduling
    d) Clear responsibilities based on project roles
    e) Well-defined handovers through approval protected phase gates
    f)  Effective Collaboration for all project stakeholders through web interface
    g) Effective use of resources through cProjects enterprise resource planning and tracking.
    h) Reduce project time to market and costs by implementing project templates
    i)  Timely and consistent status information based on dashboards, evaluations and alerts
    j)  Rapid access to all project related information in the entire SAP Business Suite.
    k) Governance through comprehensive authorizations
    l)  Tracking project history through status reports and versions
    Integration by Evolution
    cProjects supports organizations in evolving their project management maturity by constantly adding enterprise integration capabilities to their project management solutions. Many customers start with cProjects by deploying it in a stand-alone scenario with limited integration. cProjects offers a wide range of integration scenarios to increase project reach and effectiveness. A cProjects implementation growths with our customers.
    Integration Functions Include:
    1)Cross project reporting with SAP NetWeaver Business Intelligence
    2)Detailed Project Costing with SAP ERP Financials and Project System
    3)Enterprise Resource Management based on SAP ERP Human Capital Management
    4)Business object integration to the SAP Business Suite for example materials or sales orders
    5)Portfolio integration including strategic resource management with SAP xApp Resource and Portfolio Management
    6)Partner collaboration with SAP Collaboration Folders
    7)Enterprise Portal Deployment and Collaboration Room integration
    8)Confirmation of time and travel costs with SAP ERP Time and Travel
    9)SAP CRM opportunity management integration
    10)Powerful document management with SAP Document Management and SAP easyDMS.
    11)Early Project Costing with SAP ERP Easy Cost Planning
    Positioning
    Since cProjects birth as development project management for the automotive industry it has emerged to a flexible project management solution for all industries and focused on various project types, including
    new product development and introduction,consulting projects and IT projects.
    SAP cProjects and SAP Project System (SAP PS) are both part of SAP's offering for Project Management. Customers can use them independently or integrated depending on project requirements. If both are used integrated for the same projects cProjects manages project schedule and resources while cost and budget are managed in SAP PS.
    cProject integration with PS module
    With cProjects 4.0 multilevel controlling is possible. For the project type multilevel controlling (either automatic or manual) could be chosen. It can be either for the project elements or the for the project roles. Once you are on the accounting tab and by choosing account assignment you may notice that for every cProjects element a corresponding WBS element getting created in the Project system. We can do costing thereafter for the WBS elements in the Project systems
    Regards
    Award points for useful answer
    Edited by: Yogesh  Pande on Dec 9, 2008 2:02 PM

  • MM Integration with other modules

    Hello & thanks for being so quick in responding me ,
    Can someone help me with the integration of MM-PP,MM-QM, is there anymore modules apart from these 4 which interact with MM i mean SD FI QM & PP.

    hi
    FI-SD-MM Integration
    http://www.sap-img.com/financial/integration-of-fico-with-other-modules.htm
    http://www.sap-img.com/sap-mm.htm
    http://www.sap-img.com/sap-pp.htm
    http://www.sap-img.com/sap-qm.htm
    http://www.sap-img.com/sap-sd.htm
    nag

Maybe you are looking for