6500 Radio RDS problem

When selecting RDS in the Radio settings on my 6500 Slide, a 'dialog box' Proram Error is displayed.
The radio acts as a normal FM radio.
My SW version is V 04.81
Any with same problem og a solution?

You are right. NOKIA has to wake up! When I received my slide it was totally defect, see my former post:
/discussions/board/message?board.id=phones&message.id=32176#M32176
Regards
Sail4ever

Similar Messages

I am attempting to listen to iheart radio. Problem is, there is too much buffering going on. How do I correct this issue?

I am attempting to listen to iheart radio. Problem is, there is too much buffering going on. How do I correct this issue?

Robert, did you have an iPhone 4 or 4s?
And did that iPhone 4 buffer just like the iPhone 5?
And that is my frustration, I am testing these 2 iPhones next to each other, a 4 and a 5, the 4 plays, the 5 buffers!
Noooo sir, there is nothing wrong with your phone... Am I going crazy or what?
I wonder if somebody from Apple reads these posts...
There must be a solution for this but Nobody seems to know what it is and not a word from the Geniuses this time.
I am getting a 5s today, I wonder if that solves the problem...

Radio remote: European RDS problem

Several european users report difficulties in displaying RDS information while using their Radio Remote when set on "Region: Europe".
Changing the setting to "USA" solves the problem. Unfortunately changing the setting doesn't allow to properly tune some stations (0,2 Mhz step for USA, 0,1 Mhz step for Europe).
I found out on:
http://docs.info.apple.com/article.html?artnum=303038
that the RDS when set on "USA" displays program service name (PS), when set on "Europe" displays radio text (RT).
To resolve this problem Apple engineers simply have to have RDS in "Europe" mode to display PS instead of RT.
Unfortunately I seem to be unable to find a way to let Apple know; I've been browsing the support site for 10 minutes now but I seem to be unable to find an e-mail address to send this "suggestion".
Can someone help me to get this message through to Apple support.
Thanks for your kind help.
sm
iMac Core duo 20", iBook 12" Mac OS X (10.4.4)

You might try feeding back via iTunes from the iTunes menu select "Provide iTunes Feedback". A tenuous link perhaps but hopefully they'll pass on the message.
Mike
iMac G5 20 inch Mac OS X (10.4.4) 1.8GHz Rev A

6500 Classic Bluetooth Problem - 'error copying fi...

Hi,
I seem to have hit a bit of a problem with my Nokia 6500c and have really been struggling to find a solution.
My desktop PC (Windows XP)has a USB Bluetooth Dongle which was initially used with Microsoft Drivers. Everything worked fine and I was able to transfer files both to and from the 6500c, however, the Microsoft Drivers seemed to only offer limited facilities.
I therefore installed the software / drivers provided with the dongle - Widcomm / Broadcom. Again everything appeared to work fine however, when I 'right click' any file on my PC and select 'send to bluetooth device - Nokia 6500' I receive a message 'error copying file'.
The devices have been succesfully paired and if I browse the phone's files and copy / paste or drag and drop the same file to no errors occur.
Everthing else on the bluetooth connection works without a problem.
Any suggestion would be appreciated.

Hi Yoshi,
Thanks for the reply - the Microsoft drivers / software were fully unistalled before I installed the Widcomm / Broadcom software and drivers. When using the microsoft package the dongle shows as a bluetooth radio device, installs 'darfon' drivers for the bluetooth device and uses generic microsoft drivers for the bluetooth enumerator. The Widcomm / Broadcomm package recognises the dongle as simply a bluetooth device with all facilities operating under broadcom drivers.
I actually think the problem relates to the make of dongle and the 6500c not being fully compatable as I have now tried using the Widcomm software with other phones and a laptop all of which are fine. I have also tried using the phone with other PCs which are not using the microsoft package and all is fine.
The dongle I am using is:-
http://www.ebuyer.com/product/122940

Apple iPod remote radio: RDS Information in Setting Europe

Hey,
last wednesday I bought that option by an local apple dealer for my Video iPod.
After setting that radio on my Video iPod to "Europe" there aren´t any RDS information; setting back to "USA", it works properly (but only in 0,02 Mhz steps outgoing from XX,x1 / x3 etc. - normaly in united states-).
Has anybody else this bug noticed? Is there a solution to fix that problem?
(please don´t tell me to switch 'USA', - here in Germany I can´t receive Radio stations on XX,x2 etc with that setting)

Just got my Radio Remote yesterday and I also cannot receive RDS on the Europe setting. Apple really needs to go back to work on this product or release an update.
Here is part of an iLounge review:
This is the Radio Remote’s other obvious distinctive feature - support for RDS, a way that broadcasters can send limited text data to radios. RDS text varies from entirely absent to just a station’s name to a real-time display of artist and track names. Useful? A little. Cool? Definitely. But it’s also somewhat unreliable. The 5G iPod’s RDS feature doesn’t pick up all the text shown by our car stereo’s RDS display, and the iPod nano’s RDS seemed to pick up even less text than the 5G’s. (iLounge readers in Europe have already reported odd experiences when using the RDS feature overseas with nano.) From our perspective, this is not a critical part of the Radio Remote’s - or, actually, iPod’s - feature set, but it would be nice if it was more predictable and robust. We’re hoping for improvements in later firmware.
http://www.ilounge.com/index.php/reviews/comments/apple-computer-ipod-radio-remo te-ipod/
AMD64 X2 4200+ Windows XP Pro
AMD64 X2 4200+ Windows XP Pro

E75 firmware 201.12.01 FM RDS problem!!!

Recently i have updated e75 firmware v201.12.01.After updating this firmware FM RDS is not working.My previous firmware v110.48.125 FM RDS was working properly.I also hard reset my phone.But it is not working.......

Hi,
I have same problem! After updating to 201.12.01, RDS is not working. Although the "RDS" and "AF" icons are active, I can't see name of the radio station. Nevertheless in the previous firmware, RDS was working properly.
Does anybody have this problem too?
Thanks,
Petr.

HP OfficeJet 6500 (E709a) network problems

Hello. I have a new HP OfficeJet 6500 (E709a) Its all in one. I am trying to use it through a network in my home.
It is already working for 1 computer, a wireless laptop BUT not for me, a ethernet wired desktop.
PC: Windows 7 64 bit
Laptop: Windos Vista (dont know if 32 or 64) Using the printer succesfully wireless.
Well the problem is when trying to scan the printer or computer won't detect each other BUT I can print from my pc to the printer.
I installed it through the PC Add a Printer because everytime I tried it with the program downloaded from HP it wouldnt detect, EVER my connected and already tested printer. I can access the printers webpage, the 0.0.0.0.0 something page. I even tried the advanced installing way, manually typing the address the printer has but it would still not work.
I installed everything by selecting I would wire my printer later but to continue the installation I must find a way for it to detect my pc or the otherway around.
This question was solved.
View Solution.

Yes, plug the printer into your router with an Ethernet cable the run the Add Device in the Hewlett-Packard folder (Start > All Programs).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

6500 Cable Connectivity Problem

Hello,
I have just upgraded my phone to a Nokia 6500. I have installed the software on my pc. I have connected the cable to the phone and it has asked me to select the type of connection e.g. pc suite etc. When I select pc suite nothing connects to the pc. The phone display keeps asking for to select the pc suite etc. Again and again
I think that there is a cable connecting problem on the phone.
Has anyone else had this problem??
Thanks
Steve

HI,
The sane problem exists for me too. Its not detecting the phone, no response.

6500 HP printing problem

Has anybody solved this problem? I can only print a 4x5 instead of a full page. HP says it's an adobe problem not theirs.
I tried adding fax in front of the printer's name as someone suggested but it only wanted to send a fax. So that didn't work. Pllease let us know if anyone finds a fix for the problem.

What printer model - is this an Officejet 6500 series or a Deskjet 6500 series? What operating system? What program are you printing from? What are the paper type and size settings in your driver?
I could print fine on 8.5x11 paper.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Nokia 6500S Software Updater - PROBLEM

Hi, Everyone!
I was hoping that someone could give some assistance with a problem that I encountered with my brand-new Nokia 6500s (slider).
I purchased the item about 3 days ago. It's a beautiful phone with great functionality. But, I noticed that I was having some unexplained delays with SMSs. I would send an SMS and I would receive their responses 2+ hours late from the recipient.
So, I decided to update the phone's software with my PC using the Nokia Software Updater. I had used it before with my Nokia E70 with great ease.
I connected the 6500s with my PC via USD and connected with PC Suite and then started up the Nokia Software Updater. The phone had a full battery and the connection to PC Suite was recognized.
I was updating to 4.84. While updating, the phone's display went blank but the bottons were still illuminated and the update seemed to be proceeding normally. Then, at the 3-minute to completion point, I started hearing those MS XP sounds that indicate a USB device has been plugged in or removed, then the phone appeared to shut off. I thought it strange, then the Nokia Software Updater put up a screen that said "Connection with Phone Lost."
UGH! I immediately tried to power on the phone, but it seems it's now "dead." I have held the power botton for a long time, but it doesn't do anything.
Can anyone please let me know what can be done? Any thoughts would be greatly appreciated.

The only way to get your phone working again is to visit a nokia care point/service centre. It will be covered under warranty (unless you have imported it) and they may be to fix it while you wait.
Care points:
UK
http://www.nokia.co.uk/A4228006
Europe:
http://europe.nokia.com/A4388379
Elsewhere:
http://www.nokia.com and select your country.

N86 8mp Radio Transmitter problem

Hello I have an N86 which I've been using since 2 month ago and now suddenly the Fm Transmitter wont transmit music.
I can only get Nokia prodcasted on my radio but no sound of the music!
Please help I've sent it to repair and they returned it and saying they fixed it, but the same problem!

Thank you, but i have found the solution. This might be good for many n86 users!
There are two metal points at the top of thebattery input inside when you open the back cover. When connected to each other through the back cover wiring it acts as a signal producer, you may see the wire obviouse on the back of plastic cover when removed from the back, It looks like a thin metal sorrounding with two copper ends.
The solution is when changing your n86 cover REMEBER TO KEEP THE BACK COVER FROM THE ORIGINAL CASE OR REPLACE WITH OFFICIAL NOKIA BACK COVER FOR THE PHONE!
hope it helps
Its a shame how they couldnt figure it out at i2 nokia here in jordan

Selection screen radio buttons problem

How enable and disable the radio button in selection screen?

Hi Ram,
Try using the below code it may useful for solving your problem .
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-014.
SELECT-OPTIONS kunnr FOR komg-kunnr.
SELECT-OPTIONS waerk FOR komg-waerk MODIF ID def .
SELECT-OPTIONS pltyp FOR komg-pltyp MODIF ID abc.
SELECT-OPTIONS matnr FOR komg-matnr MODIF ID abc.
SELECT-OPTIONS vkorg FOR a007-vkorg MODIF ID jkl.
SELECT-OPTIONS vtweg FOR a007-vtweg MODIF ID jkl.
SELECT-OPTIONS spart FOR a007-spart MODIF ID jkl.
PARAMETERS datum LIKE rv12l-datint DEFAULT sy-datum.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-015.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS:r3 RADIOBUTTON GROUP g1 DEFAULT 'X' USER-COMMAND ucom.
SELECTION-SCREEN COMMENT 10(20) text-018.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS:r1 RADIOBUTTON GROUP g1.
SELECTION-SCREEN COMMENT 10(20) text-016.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS:r2 RADIOBUTTON GROUP g1.
SELECTION-SCREEN COMMENT 10(20) text-017.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS:r4 RADIOBUTTON GROUP g1.
SELECTION-SCREEN COMMENT 10(20) text-022.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF r1 EQ 'X'.
      IF screen-group1 = c_jkl.
        screen-input = 0.
        screen-invisible = 1.
      ENDIF.
    ENDIF.
    IF r2 EQ 'X'.
      IF screen-group1 = c_def OR screen-group1 = c_jkl.
        screen-input = 0.
        screen-invisible = 1.
      ENDIF.
    ENDIF.
    IF r3 EQ 'X'.
      IF screen-group1 = c_abc OR screen-group1 = c_def.
        screen-input = 0.
        screen-invisible = 1.
      ENDIF.
    ENDIF.
    IF screen-group1 = c_ghi.
      screen-input = 0.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
Regards,
Jana

HP 6500 Uninstall/Install Problems

Well,
I've toiled for 4 hours trying to re-install my hp 6500 that suddenly stopped working from my desktop (wired tcp). I ended up downloading the CD and running it but alas it fails every time. Usually when it tries to "discover" the network it hangs at 66%. I've read reccomendations to do a complete uninstall but no instructions are provided for working from the downloaded software (vice CD). I can still print from wireless laptops but not my desktop. My last action was to try to install it via usb but that crapped out somewhere as well. Any assistance would be most appreciated.
MDR

Hi dogtired,
Welcome to the HP Support Forums! I see your HP Officejet 6500 stopped printing from your computer. You tried uninstalling and reinstalling the software but everytime you attempt the installations it stalls at 66%, usually when it is trying to discover the network. I would love to get you back up and printing but require a little more information:
1. What is the Exact model of HP 6500 Printer you are using (as there a few in the 6500 series)?
2. What is your current Operating system, Windows or Mac and which version?
3. How do you want the printer connected, USB or Wireless?
4. Have you tried using the software download instead of the CD?
If you have a Windows OS later than XP, please start here: HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if the PSDR helps with the install, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Radio Button Problem in Webdynpro For Java

Hi to all,
I am new to Webdynpro. I want to create four Radio buttons which will fetch the data from the RFC. I have created a Context value node called options and created four value attribute under that options node.
The Problem is if i use the Radio button group by index i could map only one attribute at the "texts" field of Radio button group. how do i map the other values.
or Is there any other way of using Radio button for such of requirements.
Please if any one bring me the Solution to this issue it would be more help ful to me.
Thanks in advance...
Regards,
Malar.

Hi Thenmalar,
If you want to have four radiobutton then you need to have only one value attribute within the node.
Assume you want to have 4 radio buttons named one, two, three and four
1. Create a value node called Radio and create a value attribute within this node called Value
2. Bind this attribute to the radiobutton group.
3. Define the values of these radiobuttongroup at runtime(in WDDoInit() method of the view)
IPrivate<viewname>.IRadioElement ele = wdContext.nodeRadio().createRadioElement();
ele.setValue("one");
wdContext.nodeRadio().addElement(ele);
IPrivate<viewname>.IRadioElement ele1 = wdContext.nodeRadio().createRadioElement();
ele1.setValue("two");
wdContext.nodeRadio().addElement(ele1);
IPrivate<viewname>.IRadioElement ele2 = wdContext.nodeRadio().createRadioElement();
ele2.setValue("three");
wdContext.nodeRadio().addElement(ele2);
IPrivate<viewname>.IRadioElement ele3 = wdContext.nodeRadio().createRadioElement();
ele3.setValue("four");
wdContext.nodeRadio().addElement(ele3);
You will get the values one, two, three and four at runtime.
Regards,
Murtuza

NSMatrix Radio Group Problem

Hello !
I have a problem .
I created two radio box and associated this object to an action (call radio)
Here's my code :
-(IBAction)radio:(id)sender {
NSButtonCell *selCell = [sender selectedCell];
if([selCell tag] == 1)
[trans setEnabled:YES];
[load setEnabled:NO];
else if([selCell tag] != 1)
[trans setEnabled:NO];
[load setEnabled:YES];
When I click on the first radio box, no prob. But when I clicked on the second nothing happened. Why ?
Thanks a lot !

OK. In that case you have accidentally wired the action to a radio button and not the entire NSMatrix. You can check by clicking on your controller object in IB, selecting the connections tab in the inspector and look to see if it says the action is connected to Matrix. If it doesn't I'll bet it says it's connected to Radio Button.
It should look like this ...
http://img444.imageshack.us/img444/2240/matrixdt2.png
Eric

6500 Radio RDS problem

Similar Messages

Maybe you are looking for