6500 Slide: Require software for internet connecti...

Hi
I have a nokia 6500 slide mobile phone and have just purchased an add-on for the internet so that I can access the www via my notebook.  The mobile company '3' said to download PC Suite from the nokia site.
My problem is: When searching on the 'downoad software' page, the 6500 slide is not listed.  Please can anyone help, where I can download the correct software and version so I can use the internet on my laptop via my mobile phone.
Many thanks in advance.

It is listed on the page here:
http://europe.nokia.com/support/download-software/​pc-suites/compatibility-and-download

Similar Messages

  • I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection.  Any ideas?

    I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection.  Any ideas?

    Many Thanks, Kurt.
    I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
    I shall save it somewhere VERY safe now in case this happens again …
    You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
    Best wishes
    OllyanDinah

  • Can i run a printer off the ethernet cable connection without hurting the imac or is the ethernet slot only for internet connection?

    can i run a printer off the ethernet cable connection without hurting the imac or is the ethernet slot only for internet connection?

    Hi, Alan -
    How can I connect to both printer (HP 4050n, via direct connection) and internet (via LAN), as my iMac has only one R45 port?
    You can, but you'll need to expand your cabling a bit.
    You'll need to get an intermediate ethernet hub, switch, or router. That device sits alone, with the Mac, your printer, and your modem/LAN plugged into it.
    If you are already using a router, either separate or in combination with the modem (many modems have a built-in router), then you just need a hub or switch.
    I use an ethernet switch (10/100/1000) to let both my Macs (a 2010 iMac and an elderly G4 DA model) use my HP4000n printer and my modem. The ethernet switch is a passive device, meaning there's no setup nor instructing it required - it's truly plug-and-play. All four items (two Macs, printer, and modem) are plugged into it via ethernet; both Macs have full-time independent access to the printer and the modem.

  • Required software for communication not right

    I've received my new Ipod 30 GB. I've installed the software, but Itunes gives me the following message when I connect my Ipod;
    The required software for communication with the Ipod is not installed correct. Install Itunes again to install the Ipod software. (translated from Dutch, so is=t is possible different in English).
    I did installed the software again but it still not works. I've called Apple but the can not help me. I really want to put some music on my Ipod! Please help wat can I do?

    I have the same issue for a client trying to get their ipod to work. Their computer, a < 3 yr old Dell, doesn't have high speed USB 2.0 (incredible!).
    I'm afraid this may be the problem.
    Does anyone know if this is a feasible diagnosis, and workaround?
    Thanks

  • Application asks for internet connection

    Hi,
    When I start any application, that I wrote with python for my Nokia 5800(software version 60.0.003), it asks me for internet connection. Application doesn't use it or need it. And if I skip it applications works fine.
    I'm using ensymble(PyS60 application packager 2.0.0) with Python 2.5.2 to create application, and python version 2.0.0 on Nokia phone.
    I tried to put just "--caps=" or "--caps=ReadUserData" to check if this will remove it, but it still asks for access point. Even for simple application as: print"Hello world!"
    Does somebody knows how can I remove this?
    Thanks.

    First you've to add your WLAN network and define the settings. Now, if you open the browser in always ask mode, your new defined WLAN should be there.
    http://europe.nokia.com/support/product-support/c3-00/user-guide/guide-mch
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • What is the easiest way to check for internet connection in C#?

    Hi!
    I searched a lot but I didn't get my answer. I'm looking for the easiest way to check for internet connection. Can you help me?
    Thanks a lot.

    Hi Pouya Ebrahimzadeh,
    I suggest you could connect a site to check if it can be opened.
    Public Shared Function CheckForInternetConnection() As Boolean
    Try
    Using client = New WebClient()
    Using stream = client.OpenRead("https://msdn.microsoft.com/")
    Return True
    End Using
    End Using
    Catch
    Return False
    End Try
    End Function
    If you have any other concern regarding this issue, please feel free to let me know.
    Best regards,
    Youjun Tang
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Can i use new TC to connect wirelessly to home network and plug my tv into the time capsule for internet connectivity?

    My new tv needs to plug into an ethernet port for internet connectivity. 
    I'm hoping it can plug into my TC however my TC is wirelessly connected to my current home network... how can i get this to work?
    TC version A1470 (i think, brand new)
    Many thanks.
    Ben

    If the TC is connected to a wireless network provided by another Apple router, then the TC extends the network by default, and the Ethernet ports are enabled on the TC.
    If the TC is connected to a third party network wirelessly, then it must have been setup to "join" the wireless network. When the TC is set up this way, the TC becomes a wireless hard drive and nothing more. The Ethernet ports are not enabled when the TC "joins" a wireless network.
    So, a logical first troubleshooting step would be to confirm "how" the TC is currently set up. To do that.....assuming that you are using a current or recent version of AirPort Utility on your Mac.......
    Open AirPort Utility
    Click on the TC icon, then click Edit in the smaller window
    Click the Wireless tab at the top of the window
    Check the setting for Network Mode and report on that

  • When trying to use my banking apps I get the error "Network Required  This application requires an active Internet Connection.  Please try again"

    When trying to use my banking apps I get the error "Network Required  This application requires an active Internet Connection.  Please try again".  This happens with two different apps from two different banks.  One of them works occasionally and have not figured out why.  I have cell signal and I am on a strong WiFi network.  Same thing happens when I turn off the WiFi too.    I have tried uninstalling and re-installing the app with no improvement.   I can't seem to find any setting that would cause this.   Does anyone have any suggestions?  

    I can access the internet just fine in the browser and i can use any other app i have.
    Sent from my Verizon Wireless 4G LTE DROID

  • Dose USB dongle for internet connection work on MacBook?

    dose USB dongle for internet connection work on MacBook?

    Hi Adrian,
    IPv6 troubleshooting http://support.apple.com/kb/TS3802
    OpenSystem  Preferences > Network > select AirPort > click on Advanced  >TCP/IP > Configure IPv6 > Off > OK > Apply > Turn  AirPort Off> Turn AirPort On
    OpenSystem  Preferences > Network > select Ethernet > click on  Advanced> TCP/IP > Configure IPv6 > Off > OK > Apply
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/11395.html
    http://support.apple.com/kb/HT1714

  • Can I use Ethernet for Internet connection and Airport express for printer

    How / can I use Ethernet for Internet connection and use an airport express to set up wifi for printer and Apple TV?
    Macbook Pro. OS X 10.9.4

    I've never tried it, so I don't know what the results will be.
    However, you can move Ethernet to the top of the Services list in Network System Prefs which will cause it to be the Internet source. There is a command in the gear menu to set the Service order.  However, after thinking about it, if there isn't an internet connection via Wi-Fi, it might automatically drop down to the Ethernet connection.
    Then, you can set up your Wi-Fi so that it doesn't connect to the Internet, as Linc stated. How to do that would be dependent on the Router.

  • I have a data plan on my iPad? Can you tether from an iPad to a laptop for Internet connection?

    I have a data plan on my iPad? Can you tether from an iPad to a laptop for Internet connection?

    Yes if your iPad is a New iPad and you have a "hotspot" plan from your provider.

  • Can I use I-Phone 4 for internet connection?

    can I use I-Phone 4 for internet connection to I Pad ?

    If your cell carrier supports tethering and the WiFi "hot spot" feature, as AT&T does, yes.
    Regards.

  • Why the itunes radio keep asking for internet connection

    I recently changed broadband provider and since then whenever i try to access the music store or the radio the app ask for internet connection even when i am online

    No idea what the fix is but I just want to say I am having the same problem
    Stop asking for my ****ing password itunes - remember it please!

  • Why does Home Sharing require an active internet connection?

    I have noticed when my internet goes down I have real difficulty streaming content to my Apple TV from my iMac. I can see it but I get stuck on the spinning clock. Some audio works OK but video not. This makes no sense. I shouldn't need any internet to access content on a local device.
    It seems to be by design, per Troubleshooting Home Sharing (n.4) "Home Sharing requires a home network with an active Internet connection."
    But why can I play music but not TV shows? And why is there not an error message instead of spin? In any case why require it at all? I reset the home wireless, and the modem. My ISP confirmed there was cable trouble at that time. When the internet went back up, home sharing worked.

    Thanks for the many many replies, Apple User Community. Apple seems to have removed this requirement with the latest software update (7.0.1) for the Apple TV .

  • Windows 8.1 Group Policies For Internet Connection Sharing?

    Are there any more detailed policies available other than simply allowing or blocking Internet Connection Sharing?
    I need to find out if there are policies allow management of Internet Connection Sharing?  For instance we would like to allow ICS, but control it so that it cannot be set up by the user in unsafe manner.
    We would like to either set the PSK password in advance or at least disallow weak ICS WPA passwords.  It would also be a good idea if we could set up ICS so that only domain joined computers from our domain could join the ICS session from another computer
    on our domain or else disallow direct access and file sharing between the ICS host and the guests joining the ICS network.
    Can these types of things be managed via group policy?

    > Are there any more detailed policies available other than simply
    > allowing or blocking Internet Connection Sharing?
    No.
    Greetings/Grüße,
    Martin
    Mal ein
    gutes Buch über GPOs lesen?
    Good or bad GPOs? - my blog…
    And if IT bothers me -
    coke bottle design refreshment (-:

Maybe you are looking for