6500-slide sd card

Good evening
I have a nokia 6500-slide with a card(map) sd of 256mb,
Everything worked marvelously and since yesterday my telephonne does not want to recognize any more the card(map), he(it) did not fall, I have make nothing of special with, somebody has an idea?
Thank you

There have been some issues with the memory cards on the 6500 Slide. When the battery cover is removed, the memory card is deactivated.
On the back of the battery cover, next to the hole for the camera lens, is a a protruding metal piece which holds down the switch on the circuit board that creates the contact with the memory card, allowing it to be activated.
Check that the back is fitting correctly - if not, it will not be making contact with the switch. Failing that, it is worth getting the phone checked out by a Nokia service point. Don't try to adjust anything on the phone's body yourself, if you cause further damage you will invalidate the warranty.

Similar Messages

My 6500 slide could not read my memory card!

Hello everyone,
My 6500 slide works fine until now. All of sudden, The phone does not read my 1 GB memory card. It said "No memory card found" when I try to check phone memory. Data storage also not available. Please help!
sondang

Take the back of the phone off.
The window in the back, which has the cover for the lens, has a rim around it. Part of this rim is raised up - this is the contact to enable the phone to see the memory card.
What happens over time is that the case on the phone may become compressed and the contact gets flattened down.
What you need to do is slide a thin flat blade scredriver under the raised part, and carefully twist the blade to raise the contact upwards, very slightly (~1mm).
Put the back of the case back on the phone.
Worked fine for me!

6500 slide Micro SDHC cards

Please can you let me know if Mirco SDHC 4gb cards are compatible with the 6500 slide??? Thanks

Yes they work.
Just make sure you buy a good brand like sandisk or kingston to avoid problems. Unbranded cards tend to cause problems, especially the ones being sold on ebay.

6500 slide card

Hello, I am new on this forum and i have one question:
I have a nokia 6300 with a microsd card 1 GB
I've tried to put the card in my other phone, nokia 6500 slide and this one is asking me to format the card.
I select ok and after 10 sec is saying operation failed.....
my nk 6300 can see the card with no problem but my 6500 can't see him.
Can you give me an answer please?

i also face the same problem and dont know why.......more it ringing tone chaged automatically.................

Where is Micro SD Memory Card? Nokia 6500 slide

Hi guys,
I need some help please.
I bought Nokia 6500 slide today and on the box says that it contains:
Nokia 6500 slide
Nokia Battery BP-5M
Nokia Charger AC-4
Nokia Wired Stereo Headset HS-47
Nokia 256 MB Micro SD Memory Card MU-27
Nokia Mirco USB Cable CA-101
Nokia TV-Out Cable CA-92U
CD ROM
User guide
Everything is there except Micro SD Card. Is it somewhere inserted in the phone or it should be in the box? I am confused. I am worried because I don't think they sold me brand new item as I think box was open before they brought it to me.
Message Edited by laurra on 23-Dec-2008 09:19 PM

Hi,
Remove the back cover and you will notice next to the camera lens a silver plate. The memory card should be in there. By holding the phone so that the camera lens is at the top and the battery is facing downwards, you can put ur fingernail carefully at the top of the silver plate where there is an indentation and slide the cover down without removing the battery. You can then remove the memory card once you manage to get the silver plate to pop upright..
Hope this helps.
To insert ur sim card, you need to remover the battery. The sim card compartment is just below the memory card slot. When you need to get the sim card out, use the little metal slider beside the memory card slot to push the sim card out of the slot.
Mojo!

6500 Slide problems with SD cards

Hello, I have problems with my SD card on my Nokia 6500 Slide because it can not find the card, I have tried to change the map of a 1.GB, but it did not help, there are some who know the problem
Greetings Jerrild

just a supplement to the above
I have also updated the phone to the latest software
Jerrild

Problem with Contacts for 6500 slide

I recently bought a Nokia 6500 slide and i`m very pleased, except one thing.
I used to have some other phones, and all my contacts were on the memory of that phone (not on the SIM).
For me to have my contacts on the 6500 slide, i had to move all those contacts on the sim, then insert the sim into the 6500 slide and move them again from there to the phone memory (i hate having my contacts on the sim couse i can't add any aditional info).
Ok, so.. after i moved all my contacts to the phone memory, i saw that from about 200 contacts, i only have about 20. At first i thought "ok, there was a problem with the moving process and i lost them all..." I was just about getting over this, when I realized that those numbers that I lost are still in there, but i can't see them.
If I manualy enter a number of a contact that don't show in my Contacts List, when it dials, the number appears on the screen. Same if that contact calls me. I can't see them in the Contact List tho.
It's like there are hidden or something..
I tried changing the settings so that i can see only the contacts in the SIM (in which case, none apear), only in the phone (only those 20 or so appear) or showing both (still, only 20 or so appear).
The contacts are not in the SIM couse i tried putting the sim back in the old phone, and it's empty.
They must be somewhere in the phone. Is there a hidden setting that i can find, that allows me to see those contacts that I thought I lost? It's very annoying to wait till someone calls me so I can add his number again in the phonebook
To be more specific, let me give an example.
Let's say I had contact "John" with the number "12345678". Now I can't see it anymore.
If i dial 12345678 and then hit "Call", it apears like "Calling John"
If John calls me, it apears like "John" on the screen.
If i try to add John to the phone book I get a message like "A name is already entered for that number"
It's like... all the contacts are already there, but I can't see them
Can someone help me please... I`m really desperate

Hello and welcome to the forums;
First, you mention the error references a SIM card, however your profile says you have a Sprint device. A small problem there, and I would like to clear up any confusion as which device you have: a Sprint CDMA device, or one with a SIM card.
Second, have you tried restarting your device? Hold down the power button and move the ringer mute switch next to it back and forth 3 times, then wait 4-5 seconds for the device to restart by itself.
Try this, and let us know what happens.
TreoAide

Can't set the time on the 6500 Slide

I just bought a 6500 slide and can't do one of the most basic things - set the time!
I have gone to auto-update but it is shows the wrong time.
At the time I purchased the handset the sales assistant turned the phone on to check if my sim card was working but he may have saved the incorrect date and time.
I have managed to save the correct date but can't for the life of me now save the correct time.
Can anyone help?
So simple but yet I can't figure it out.
Thanks.

Hi racheljc,
Try this:
Menu
Settings
Time and date
Time
From there, you should be able to change the time.
I hope this helps.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

6500 Slide Limitations on Message Recepients

Hello,
I had used N72 and then shifted to 6500 Slide recently.
What annoys me is there is a limitation of 20 receipients for a text message.
Even if my mailer group is more than 20 it accepts only 20 recepients.
My software is 4.84 and i am facing Handset HANG during call.
This is very sad part of 6500.
Any solution available for this.
Prashant
Moderator note: Contact number removed.
Message Edited by dazz19 on 03-Jun-2008 06:50 AM

You could try turning the phone off, take the back cover off, remove the battery,memo card and the sim card. Wait approximately 10 mins then put the SIM card and battery,memo card back in, replace cover and turn the phone back on.
dont attempt a self fix take it to a nokia care centre to be fixed
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

6500 Slide Problems

Hello,
I brought a Nokia 6500 Slide about a month ago, about a week ago all the buttons stopped working except for the End Call (red button), so i could only turn it on and off.
Couple days ago they started to work again, but then i came across another problem. Now everytime i switch the phone on if works fine for a couple seconds then resets to the starting screen and switches itself off.
The software version is v8.3
Any help on this please ?
Regards

Probably the best advice ever given to me about this particular model phone (Nokia 6500) was from a tech support guy, who i might add was very patient with a new user (yes new, not novice - don't assume i know nothing about phones) he spoke clearly and slowly these words.
"Ok sir, please give me another number i can contact you on"
- so i gave him the number of my girlfriends phone -
-30 seconds later he calls back on the other number -
"Ok now go ahead and power down (turn off) your phone and allow at least 30 seconds for the power down to finish, now please go ahead and remove the back plate of your phone, now remove your battery and wait a further one minute while we discuss some other features you mentioned earlier" - so he was giving the phone time to go completely dead with no power (battery removed) and kept chatting to me about other features on the phone, while i presume he kept one eye on the clock- after about 3-4 minutes of discussing some other features on the phone, he said "Now go ahead and reassemble the phone, by putting the battery back in and replacing the back plate" -after i had done all this he said- "Now please turn the phone back on and wait at least 2 minutes before touching any other keys" -again he kept me talking about other features on the phone, whilst maintaining one eye on the clock- at the end of it all- "Please reset all your ringtones and personal settings the way you would like them to be" -again he waited on the line while i did this-"Now please if you have any other problems like this, please call us back" and to this day, i have not called them back.
Listen carefully to what a tech support guy says, follow his/her instructions to the letter and you too can have a trouble free Nokia 6500 like me.
Occasionally when my phone does this default reset - i feel as though it might be a problem with the interface between the mico SD card and the phone's ability to communicate between the 2. So a simple hard reset as described above almost always fixes the problem. Nokia's source coding would be older then most people who come on these forums - and have no doubt in saying that there may be some slight glitches in this particular release ... but a simple hard reset almost always fixes this particular problem.
Some programs that run devices are almost mechanical and if they miss a step, have almost no way of reverting back to the previous step, so resetting the phone will take us back to the first step and allow the phone to work it's way through it's own process until the glitch becomes evident again.
Message Edited by mad_on_phones on 19-Oct-2008 11:55 PM

Polish Language Pack for 6500 Slide Nokia

Greetings!
I am based in Great Britain and have purchased a Nokia 6500 Slide on a "Pay and Go" sim card on the 02 network in England for my Polish Girlfriend.
The phone only has some European languages and there is no option for the Polish Language. Is there any software/firmware or language packs that I can download to the phone? Any advice gratefully recieved.
Thanks in advance.

you can take the phone to the nokia care point service to install your polish language.
NOKIA means:Night Of King In Alone

Phone update for 6500 slide

I have used Nokia Software Updater before to update this type of phone and it updated okay to the latest firmware.
But this latest phone it won't recognise, i am using a standard nokia USB cable and it does keep losing connection so i thought it could be a broken cable but i think it could be the phone not being recognized as it came from China and seems to have Chinese Network and Pinyin branding because if you do a factory reset it defaults to Chinese language.
I am able to use Virgin Sim card and also eventually got T-moble internet access on the phone.
Software Details are -
V 05.41
30-11-07
RM-278
(c) Nokia
It always defaults to upper case when texting.
Will debranding get rid of the chinese?

Please, try the Nokia Software Recovery Tool first. Is your Nokia 6500 slide shown in the Nokia Suite or the PC Suite? If not, is your phone correctly shown in the Windows Device Manager? If not, did you right-click in the Windows Device Manager and select ‘Update Driver …’?
Ds3425 wrote:
It always defaults to upper case when texting.
Will debranding get rid of the chinese?
If you want to get rid of this uppercase stuff (because of Chinese), you have to change the set of languages. The set of languages are determined by the firmware variant. And the firmware variant is determined by the 7-letter (product) code which is printed on the label underneath the battery.
If you change the model code (RM-xxx) you break your phone because those firmwares do not fit to the hardware (frequency bands, …).
Okay, changing the product code, officially only Nokia Care Points do that, officially. It won’t fix your Nokia Software Updater issue but that uppercase stuff.

Maximum MicroSD capacity for Nokia 6500 Slide

What is the max MicroSD capacity supported by the Nokia 6500 Slide ?
The Nokia website says 4GB, but can I use 8GB or 16GB?
Thanks!

the maximum officially supported memory card is 4gb, you can take a look at this thread , it might help you :
/discussions/board/message?board.id=phones&thread.id=27516
Fear not those who argue but those who dodge

6500 slide syncro problems

I just got a new 6500 slide and I wanted to synchronize it with my old e61 but it is impossible
it is saying that I should check the connectivity. but everything is alright. the bluetooths are on, they do find each other, but as soon as it starts doing it, it stops...

i have the same problems. i went back with it to orange and it kept it for about a month to repair my keypad. when i got it back the camera key on the side of the phone was not working and the problems started to come. memory card can not be read. the phone tells me i erased the memory card but it is still in the phone. i can;t write a message because of the big delay. but if i take out the memory card it works properly. but i installed the new software and now i have no memory. i can;t even write a reminder and save it. what is there to do?
Message Edited by calina on 01-Nov-2008 05:08 PM

6500 slide appears to have died

I'm absolutely devastated! My trusty old 6500 slide appears to be dead.
When I switch it on, it's like it's trying to boot up but then the screen sort of pixelates and then goes white then it switches off.
Does it sound like it's beyond repair?
Any advice greatfully received.
Thanks
Alison

try remove battery and memo card for ten mins then reinsert battery and see what happens,if no change send it to a nokia care point it can be repaired .
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

6500-slide sd card

Similar Messages

Maybe you are looking for