6500 VLAN Interface (SVI) Throughtput

Question

Guys,
Very quick one, does anyone have any stats on throughputs on a VLAN Interface on a 6500 MSFC2
I just remember the old days where if you had an RSM, and it had a VLAN interface, the throughtput was 400Mbps (or sommat like that)
Can a 6500 MSFC2 SVI run at a full gig?
Sorry if this sounds a little crazy.
Kindest regards,
Ken

Answer 1

That makes a lot of sense.
I just did some research, and yes it was 400M on a 5500 and now 1000 for the 6500 with an MSFC 2, so yes, they have not increased it that much becuase As you say, it should all be cef-based MLS or traditional MLS based
Many thx all,
Ken
on a 6500 switch
Switch sh port 15/1
* = Configured MAC Address
Port Name Status Vlan Duplex Speed Type
15/1 MSFC connected trunk full 1000 Route Switch
Port Trap IfIndex
15/1 disabled 5
Port Status ErrDisable Reason Port ErrDisableTimeout Action on Timeout
15/1 connected - Enable No Change
Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize
15/1 0 0 0 0 0
Port Single-Col Multi-Coll Late-Coll Excess-Col Carri-Sen Runts Giants
15/1 0 0 0 0 0 0 -
Port Last-Time-Cleared
15/1 Sat Jul 23 2005, 20:11:34
Idle Detection
on a 5505 switch
Console> show port status
A response, similar to the following, is displayed:
Port Name Status Vlan Level Duplex Speed Type
1/1 connected 523 normal half 100 100BaseTX
1/2 notconnect 1 normal half 100 100BaseTX
2/1 connected trunk normal half 400 Route Switch
3/1 notconnect trunk normal full 155 OC3 MMF ATM
5/1 notconnect 1 normal half 100 FDDI
5/2 notconnect 1 normal half 100 FDDI