6506, 6509 Chassis Exchange along with SUP 720-3B and SUP 2T-10G
Hi friends,
I have a situation which looks straight forward but since I have not done this before, I thought I should put this here to have some ideas and gottchas related suggestions to look for.
Situation 1:
Basically I have a situation where there is an existing 6506 chassis with SUP32-GE-3B. for some business reasons we have to replace that with a 6509 chassis with SUP720-3B keeping the configuration intact.
Situation 2:
In another situation, we need to replace an existing standalone chassis 6509 with SUP-2T-10G with a pair of 6506 with SUP-2T-10G on each running VSS. Is there any gottachas around this work?
Also, while I was trying to boot the spare 6506 with SUP-2T card, it constantly went to monitor mode with the following error messages
System Bootstrap, Version 12.2(50r)SYS3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2012 by cisco Systems, Inc.
PYRAMID platform with 2097152 Kbytes of main memory
rommon 1 >
rommon 1 > boot
PCMCIA bootdisk: device is not initialized
open: read error...requested 0x4 bytes, got 0x0
trouble reading device magic number
boot: cannot open "bootdisk:"
boot: cannot determine first file name on device "bootdisk:"
rommon 2 >
Any suggestions for this? It looks like the bootflash memory is missing from the SUP. I am not sure if this flash is usually onboard on this SUP or it should be like an external PCMCIA card.
Look forward for your help and suggestions.
Thanks in advance.
Regards,
Mohit
Hi SJ
The 16-port 10 Gigabit Ethernet module is interoperable with all models of the Cisco Catalyst 6500 Series Virtual Switching Supervisor Engine 720 with 10 Gigabit Ethernet uplinks or Cisco Catalyst 6500 Series Supervisor Engine 720, including VS-S720-10G-3C, VS-S720-10G-3CXL, WS-Sup720, WS-Sup720-3B, and WS-Sup720-3BXL. When mixing DFCs in the same chassis, the chassis will operate in the mode of the lowest common denominator.
see link below
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-6500-series-switches/product_bulletin_cisco_catalyst_6500_series_16port_10gigabit_ethernet_module.html
Regards,
Yaseen
Similar Messages
-
i want to buy a iPad2 to go along with my mac desktop and iPhone, do I have to repurchase the same apps. to put on my iPad?
You can use most of the apps that you bought for your iPhone on the iPad as well. Sometimes the apps are not optimized for the iPad's larger display. Sometimes the apps are limited to the iPhone and you must purchase a separate iPad version. As with your iPhone, Mac apps cannot be used on an iOS device.
-
Hii Can anyone tell me is there any possibility of giving some due payment like bonus or offcycle once employee termination is done along with the payroll run and posting.
ThanxOne Possibility is by making manual entry for that employee from FI side.. (this will give you soln..) Take the help of FI consultant...
Another possibility is in IT0003 "Payroll Status".. You can opt mention next month date "Run Payroll up to" & execute Off cycle payroll for that employee...
Just try this hope this may sort your issue....
If it still it doesn't give you soln.. You may need to reverse the posting of that employee & change employment status.. Run Bonus & finally terminate the employee & do the posting.. -
i changed my number along with my sim card and imessage will not recognize my new number. how can i have imessage forget my old number and use my new number?
i have tried signing out of imessage and signing back in. (when i do that and am asked to select my email adress, i see my new number but it is greyed out and i cant select it)But under send and receive, my old number is still displayed while my new number isn't.
-
What happens to my "Dock"? I use that every time I open my computer(s), along with various mail accounts, and even the Widgets?. Thanks.
Using iCloud will not affect your dock or your widgets. If you upgrade to iCloud, your MobileMe mail account will be updated to an iCloud account, but that is all that will happen. What exactly is it that you are worried about.
-
How to print the top of page part along with the ALV list and generate PDF
HI all,
I have created one ALV by using oops concept .
and also am able to get the top of page where I have One standard logo on the right hand side
and some details on the left side .
Now my requirement is to while printing the list the logo and other top of page details should appear
In the PDF output but currently while am pressing the print preview button only the alv data is coming
am already using the method
handle_top_of_page
FOR EVENT print_top_of_page
OF cl_gui_alv_grid,
may be am missing something ... How to get the top of page along with the logo printed ?Hi Surya,
After generating the grid display click on print button,
a spool number is generated. capture the spool number and convert it to pdf using the fm:
CONVERT_ABAPSPOOLJOB_2_PDF and save the file
Hope this will solve your problem.
Regards,
R K. -
Can't configure a SCXI chassis (PXI-1010) with a PXI-8176 and a PXI-6052E.
I have a PXI-1010 chassis with a PXI-8176 running Windows 2000. In the rightmost PXI slot, I have a PXI-6052E. The remaining PXI slots are either empty or have misc. modules in them. I have a SCXI-1520 in the leftmost SCXI slot.
I am trying to get MAX to recognize my SCXI chassis with the SCXI-1520. When I try to add the SCXI chassis in MAX by right-clicking "Devices and Interfaces" or "NI-DAQmx", I leave the communication mode to communicate on the PXI backplane, choose SCXI slot zero, and find that the communication device field is greyed out where I want to choose the PXI-6052E. For some reason,the wizard used to add an SCXI chassis does not see my PXI-6052E pluged in to the leftmost sl
ot. Strangely, MAX does see the PXI-6052E in the "Devices and Interfaces" tree. I verified that the 6052E is working correctly. I also verified that the pxisys.ini file is in the WINNT directory. What is the problem?I am first trying to install the SCXI chassis using the SCXI 1520 user manual. I put a PXI-6052E in the right-most PXI slot and the SCXI 1520 in a SCXI slot. On page 1-12 of the SCXI-1520 user manual, it instructs me to power up the chassis, right-click on MAX "devices and interfaces", choose the correct chassis, and click finish. The problem is, after I click finish, a window appears that forces me to choose a DAQ device. The SCXI chassis doesn't configure correctly because the wizard doesn't see the PXI-6052E.
-
Just installed newest iTunes. The iTunes screen is missing ALL menus (menu bar, side bar everything is blank) All music albums have a musical note icon but NO album titles or song titles. Music plays but there is no way to know which album or which song until the music starts.
No prompts, no words nothing. Any thoughts??That's consistent with trouble with the Segoe UI fonts on your system.
If you're using Windows XP or Windows Vista, try Vortical's technique from the following post:
Re: iTunes 10.1 Missing Text
But if you're using Windows 7, try itunesTRK's suggestion from the following post:
menu bar invisible -
as I stated. the white in any file I open in PS s a warm white. I don't know how this happened or how to fix it. I do know it is not my PC or moniter. Only in PS. any hepl is appriciated, thanks, P
My5cats, Cris may have more to add but here are some thoughts. A calibrated monitor does have warm whites. We perceive a blue white as being correct but it isn't. i don't know if you are using monitor calibration or not. One possible area is that Photoshop is set to a paper or some other gamut. You can check (in PS) by going to the Edit menu > Color settings. Here is a picture of mine. I set the working space to sRGB which is used for the web and many printers. If you get a correct setting , consider saving it.
-
help
I had the same issue and resolution. Spotlight search for "Mail Badger" and deleting everything resolves the issue.
I'm also running Safari 3.0.2 and 10.4.10...
I've emailed the developer to let him know about it..
15" MacBook Pro (C2D) SR Mac OS X (10.4.10) -
Problem report for Safari reads: Safari quit unexpectedly while using the coreclr plugin.
Go to /Library/Internet Plug-Ins. If you see the Silverlight.plugin, move it to the Trash.
Now click your Apple icon (top left in your screen) then click Software Update to make sure all your software is up to date.
Restart your Mac if any updates were installed.
Try Safari / Hotmail.
If Safari crashes again, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder. -
I have checked for viruses, restarted it and nothing works. It doesn't do it all the time just most of the time now.
Try resetting your PRAM by restarting, then holding <CMD>+<OPTION>+p+r until you hear the start up chime twice, then release the keys and allow to boot up.
If that doesn't work try resetting the SMC:
http://support.apple.com/kb/HT3964?viewlocale=en_US&locale=en_US
If those two items don't help take your machine to your nearest Apple store and see if they can assist. -
Strange issue with Multi-Table LTS and report filters (10g)
Hi,
I am having some troubles with the following scenario:
I have a large flattened table that is being used as both Fact and Dimension in the BMM layer. I also have another table that contains some supplementary measures needed by some reports.
Logical Fact table has an LTS that consists of the 2 tables which are joined on 2 columns (eg, a.col1 = b.col1 and a.col2 = b.col2, etc). The columns used in the join also exist in the logical dimension which uses the same flattened table. I use these columns in my report filters.
I have created some Fact measures, some from each source inside the LTS.
What's happening is that when I am using this model in Answers, the query being generated is applying my filtering conditions to both tables, which seems unnecessary to me since they are joined on these columns.
i.e.,
select *
from table1 a, table2 b
where a.col1 = b.col1
and a.col2 = b.col2
and a.col1 = 'Value 1'
and a.col2 = 'Value 2'
and b.col1 = 'Value 1'
and b.col1 = 'Value 2'
The last two lines in the query above should not be happening. I have not mapped these columns anywhere in the BMM to table2 (other than physical layer join), only to table1.
For clarification, it's not hurting the end results from what I've seen, but it is adding additional filtering to the query that can increase overall cost, which I'm trying to avoid.
Any ideas/suggestions?
Thanks
Edited by: odinsride on Jan 31, 2012 5:03 PMHi,
I think this is a known issue. I think that the BI Server pulls in both the tables involved in the LTS for any query (Yes, even if the query has only one column from any of the tables in LTS) and so are the filters.
In this case, what I would suggest you is to create 2 LTS (probably 3). One for each physical table (that are being joined in the LTS) and one for both of them joined (may be inner/left/right) etc.
With this kind of setup, when there are reports for any particular column of this logical table, the BI Server can go and choose the corresponding LTS only. However, if there is a report with columns from both the tables, the BI Server would choose the LTS with the join.
Hope this helps.
Thank you,
Dhar -
Dears
I have 2 no's 6509 chassis in VSS with sup2t and ASA-SM installed, as I know that the dataplane is active for both switches so the cisco says that I we will get the throughput of 4.0 tbps but the ASA-SM only supports 20 gbps, and all vlan interface are created on ASA-SM module so there all bottleneck happens, Customer is not ready to move any vlan interface to the 6509 MSFC by bypassing ASA-SM.
so how the ROI should be explained to the customer of SUP2T with ASA-SM if installed.
thanksDear Jon,
1) It's an ASA service module inside the 6500 chassis and not the ASA standalone appliance. All Network in the world will reach to a place where they have to push the traffic to firewall where definitely the speed will reduce from tbps to gbps and not every organization can place high end firewall with 10 GIG ports with better throughput, so from your reply what I understand is that VSS benefits only with an intervlan routing.
Bear in mind that if most of the traffic is routed to remote networks then your uplinks also become bottlenecks although you could probably get more uplink capacity than your ASA gives you.
how to get more uplink capacity ??
Of course there are obviously other benefits with VSS in terms of ease of configuration, redudancy etc. and it really comes down to your priorities.
can you list more.
2) I have read the SUP2t Datasheet saying per slot 80gbps I hope it is half duplex becz if I put 16 port 10 gig module the bandwidth will reach till 160 Gbps , please correct ???
3) I have attached 4 port 40 Gbps module datasheet, so what it says that with all ports sending traffic will reach to 160gbps per slot if a chassis populated with 40 gig module and all set to send traffic with full bandwidth than it only reaches to 1.7 tbps which is less than 2tbps.
4) I have another doubt that 6500 chassis backplane support only 40 gig so incase if the module is sending traffic with 160 gbps than how it handles.
Thanks -
I want to upgrade my iphone and want to make sure that all my phone and email contacts get transfered along with my photos, videos and music to new phone. How do I go about doing that?
http://support.apple.com/kb/ht2109
Maybe you are looking for
-
Getting music from one iTunes account to another on the same iMac computer
I have a iMac and my family all use it. We all have our own profile/account logins. My daughter has her own iTunes account (but with my credit card) and i have my own itunes on my own login profile account with the same cc # and expiray date/etc....
-
I just upgraded to mountain lion and I can't figure out how to use messages... it wants me to use AIM or something like it, but I can't change the user... How do I do this??
-
Hi , When I tried to update the IOS to 6.0.1 from current 6 verion on my iphone through itunes libray got a error mesage.Now i am able to see only cable symbol and itunes symbol on my iphone 4.
-
Dear All, We are in a need to clone a XI system and trying to do a export of .TPZ files from Integration Repository and Integration Directory to a file system and to move it to the target. Want to sure that we are following the right procedure. Steps
-
Safari 1.3.2 quiting and how to optimize hard disc - OS 10.3.9 eMac
My three year extended warranty ended this spring as did software updates and the disc optimizing after each update installation. I've noticed Safari is getting slower and quiting more frequently and it's getting worse. Could this be due to not optim