6510 all in one photosmart printer - not printing black and/or not at all after 7/22/15 update....

Printer not printing in black at all, poor color print since 7/22/15. I have downloaded drivers and software, hard reset the printer (power cord out and unplugged then plugged all back in), read all the forums, watched youtube videos, called friends, googled answers, bought new ink (waste of money), cleaned print head multiple times, did every step on every forum post to no avail... Bought a new printer but really would rather return it and get my money back after getting this printer up and running again- why because I think the problem is due to HP and the new update released 7/22/15! I'm very upset, I have spent countless hours attempting to fix this printer (which I really do love up until now). I have lost credit on school assignments due to printing issues, wasted money on ink (that is really expensive) and wasted the ink trying to fix it running test page after test page. I feel like this is not fair to the consumer and I am very upset. I am ready to throw this thing in the street and smash it to pieces with a baseball bat at this point. I really would rather fix it but apparently this is the only way to contact someone. I have had this printer for 3 years and do not think I need to replace it or spend money to call someone from HP to fix it nor do I feel like I need to have it "serviced", nor do I wish to waste any futher time or money on the expensive ink this printer requires.

Hi there ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact.
Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions
Regards,

Similar Messages

HP 7280 all-in-one says ink cartridges are empty and will not print from PC, but it copies fine.

Replaced 2 ink cartridges in hp 7280 but still says both cartridges are empty and will not print from PC, but it will copy fine. When I try to print I get a error box that says "Ink cartridges empty - replace black and yellow ink cartridges to continue." They are brand new - just bought them - expiration date Sep 2015. Have tried rebooting and disconnecting and reconnecting everything. Same error, but it still will do color copies fine - all cartridges are working. Help?!

Hi tfmartin,
I understand you have a Photosmart C7280 that you are unable to print to from your computer. I'm sorry to hear about this, but I will certainly do my best to assist you in resolving this issue.
Before I can offer any suggestions I do need to know which version of Windows or Mac that you're using and how the printer is connected (wireless or USB). Once I have that information I should be able to help you better. In the meantime, if you're using Windows, please download and run the HP Print and Scan Doctor to see if it can assist with the issue at hand
Hope to hear back from you soon! Have a great day
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Why does 3522 prints only in black and white not in color

my 3522 hp printer will print only in black not in color.i have new color carttridges #564 and the black is not low.any help would be appreciated.

The troubleshooting steps in the document here may help resolve color not printing on your Deskjet 3522. If this does not resolve the issues please provide some further details - what is the operating system on your computer? Does the printer make color copies properly?

HP photosmart premium C309a photos printing black and white not colour

My printer is printing photos in black and white not colour as requested on print preferences. any ideas?

Hi fossil1, are the color ink levels ok? Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Print in Black and White, NOT GRAYSCALE!

Hello,
I'm trying to print on my Mac in Black and White -- NOT grayscale. The printer I'm using is a thermal printer that prints on heat-sensitive card-stock (a DataMax E-4203 printer) and when I print bar-codes on there the edges of the bar-codes are "fuzzy" as the Mac tries to convert it into a grayscale image instead of a pure black-and-white image. With the edges being fuzzy instead of crisp, the bar-code scanner device I have simply cannot read the bar-codes. If I use the software on a Windows machine, it prints the bar-codes perfectly, because in Windows I can set the printer to be Black and White, instead of Grayscale..
So, on a Mac (Mac Pro, OS X 10.7.3) how do I set it to print in pure Black and White, not Grayscale?
Thanks for any help you can give me,
Laurence MacNeill
Mableton, Georgia, USA

You're taking a rather large loss on a new computer and spending the money on another one to fix one issue on an obscure piece of hardware? Do this instead.
1) Cancel the order on the Dell.
2) Use Boot Camp to install Windows on your Mac Pro. WAY less expensive to buy a copy of Win 7 to run on your Mac than the money you're planning to flush down the drain.
3) Get on the lazy butts of the company that make your thermal printer to write a Mac driver that has all of the same settings and features of the Windows driver. Which may not be easy as their site marks the printer you have as discontinued, though still supported.
DataMax has one heck of a crappy site. I've looked around a dozen pages and can't find something as simple as print drivers to download.
Yes, DataMax's web-site is awful... But they don't support the Mac at all, so even if their web-site was great, you'd never find Mac drivers to download... The Mac driver for this printer comes from a company called the Peninsula Group, and they write drivers for dozens of different thermal printers... They claim that they cannot write a driver that has all the features of the DataMax Windows driver, because of limitations of the CUPS printing system on the Mac... I claim that's B.S., but how am I going to prove otherwise?
I considered running the Mac in Windows BootCamp mode all the time -- but then what's the point in owning a Mac? Originally I was happy to be making the switch from PC to Mac... But everything (not just printing, but nearly everything I do) is more difficult on a Mac... Owning this machine has been the worst computing experience I've ever had... No joke.. I've never had such trouble doing what I want to do... Nothing works the way it should work. Nothing.
If I had been using Macs all along, then perhaps I'd feel differently... But everything is so different on a Mac, that I just can't seem to get used to it... For crying out loud, the Home and End keys don't even work right!! I hit End and I expect the cursor to go to the end of the LINE, not the end of the DOCUMENT! (End of the document is what Ctrl+End is for, dammit!) What the **** is up with that?! And scrolling is wrong, too... It scrolls up when I pull down on the mouse-scroll. Everything is backwards on the Mac... I've truly grown to hate it the more I use it... I'll not be buying another Mac, if I can help it... Wish I'd never bought this one... Call it a very expensive lesson learned...
L.

How to print to my wireless all in one photosmart prem c410 when printer is not powered on?

how to print to my wireless all in one photosmart prem c410 when printer is not powered on?

Hi,
You cant print to a printer that you physicly turned off. Most network printer have a sleep mode, so leave it on and after a while it should go into a sleepmode. And should wake up when a printjob is being sent.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

I have an HP C309a all in one Photosmart. When I go to print on a Printable CD It only prints on 1/2

I have an HP C309a all in one Photosmart. When I go to print on a Printable CD. It only prints on 1/2 Right side of disk. Why?
I am using PS23 and used the label format for making the copy I wanted to print on printable disk.
Herman

HI,
You should be able to just leave it on, it should have a sleep mode which it will enter after a while.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

My printer is a fairly new all-in-one Brother MFC-7860 DW. It is not listed in the iPad AirPrint printers. Can I get it to work with my new iPad2?

My printer is a fairly new all-in-one Brother MFC-7860 DW. It is not listed in the iPad AirPrint printers. Can I get it to work with my new iPad2?

If it's not an Airprint enabled printer, you can not natively through your iPad. BUT, there are apps you can purchase in the App Store, like Print Central ($9), which is what I use myself and works well for my needs.

C6180 All In One Photosmart. Software and drivers will not install on Windows 8.

C6180 All In One Photosmart
on
Windows 8 64bit
Acer Aspire V5-552PG
AMD A10- 5757M
Radeon HD 8750M dedicated
Software and drivers package will only unpack but not install.
When the unpacking bar reaches the end, it disapears without any following actions.
I have of course tried it over again many times, and I have deleted the download and redownloaded it again but the same happens every time.
Any idea on how to solve this?
Sincerly
FLFO

HI FLFO:
I have done some research on your post. I have found a document with steps to help resolve the stall you're experiencing during your printer installation.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00836418&tmp_task=solveCategory&cc=us&dlc=en&lc...
Happytohelp01
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Error code B81AA24C on my officejet pro L680 all-in-one ... can printer be fixed? how??? thanks..

error code B81AA24C on my officejet pro L680 all-in-one ... can printer be fixed? how??? seems to not power up ...thanks..

Hello
Is it possible to do a reset on the unit? Via: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00841912&cc=us&dlc=en&lc=en&product=2512009&tmp...
To try to get it in default mode
Kind regards
Best regards,
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
Although I work for HP my posts and replies are my own .....

Any suggestions for an all-in-one "cable modem router print server" (N)

any suggestions for an all-in-one "cable modem router print server" (N)?

If that's a problem with your cable company, change the company.
If your cable company is not able to provide you with a cable modem which gets you full performance for their service why would you bother with that company or try to make it better than them?
If you subscribe to a 100 Mbit/s service they must be able to provide you with a modem that does 100 Mbit/s and be able to demonstrate you 100 Mbit/s on your cable.
If they are unable to provide you with a modem which does 100 Mbit/s and thus cannot demonstrate that the service they have installed in fact can do 100 Mbit/s but only give you a 50 Mbit/s because that's the best they have, why bother buying yourself a better modem to find out whether or not their service does what it promises or not??
In addition, an integrated device won't get you better performance. On the contrary, consumer devices are generally single CPU (and core) devices. It's usually running some Linux or similar. If a single process gets overloaded it can drag down the performance of the whole device. For instance, let's say there is a bug in the print server software of the router. You print something and it hangs and the print server process on the router runs wild. Now the CPU is fully loaded and the routing performance will go down. If there is a bug in the routing software it will bring down the whole device and you can't even print.
You'll get the best performance if you use dedicated devices because then one device cannot overload another. Get a modem. Get a wireless ethernet router. Get a printer with integrated print server. That's far better.
It's like the all-purpose audio device compared to components...

IHP F2210 all in one deskjet, need to print in black, but prints in color

My HP F2210 all in one deskjet, is having printing issues. When I set it to print in draft in black ink only, it then prints in color, I just don't understand WHY, can anyone offer assistance?
thank you
miricro

Hi there miricro,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Hp6520 all in one photosmart

pposed to be the top tech still am unable to use my printer to m y hp6520 all in one photosmart printer to either send nor recieve my e-mail no matter what I do it still does not work and the local office depot refuses to help me out I purchadsed this printer from the store located here in Orlando florida craig is the supposed to be the head tech. at this store but they had turned his back on my wife and I like my self have purchased many items from this store of which we believed in his honesty but no more so we all agree that we need to change to staples we have contacted them and they are very much in in our business not like office depot which their number is [mod edited on 8-12-14]
and they are only a couple of blocks away staples the manager was surprised at the way we have been treated by office depot here in Orlando we like and appericsate hp equipment printers and
computers and all.

Hi williamback5088,
Welcome to the HP Support Forums. From your post, I think you are looking for help with your Photosmart 6520 printer.
To better assist you, would you please supply some further information:
What is the issue you are experiencing?
How is the printer connected (USB cable, or wireless)?
What operating system are you using on your computer? whatsmyos.com
Are you getting any error messages? If yes, what does the error message say and where is it displayed (computer or printer)?
Do you have any Firewall or Anti-virus software installed on your computer?
Is the printer plugged into a wall outlet?
Are you able to make a copy using the front panel of the printer?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

I have a Officejet 8500 A910n. When printing a pdf the print job just stops and will not print.

Only certain files the print job just stops and will not print in Adobe Acrobat X. All other applications work fine.

Have you tried downloading and installing Adobe Acrobat XI? http://www.adobe.com/products/reader.html
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HT204135 This is my first iMac. How come everything I print is in black and white? I have an HP Photosmart and it prints in color just fine except when I print using the iMac.

Unlike my other computers where I can change the printer setup ( color, black and white, paper type etc) I don't see that option on the iMac. Is it called somethng else? I want to retire my old computer but can't until I can print in color.

Thank you, I did that, after I click "show details" I see where I can change the paper size, reverse print etc. but I'm not seeing an option to swtich to color. On my HP and IBM PC's I can click on printer properties and change the print quality, paper type ( e.g.photo), grayscale and such. Do you by chance know if this is not an available feature on iMacs or maybe my printer isn't iMac friendly?

6510 all in one photosmart printer - not printing black and/or not at all after 7/22/15 update....

Similar Messages

Maybe you are looking for