6510 no longer works on pc after installing on mac

I just bought a macbook pro.  My HP Photosmart 6510 was setup effortlessly on the mac.  What a change!
However, no my PC will not print?  The documents just get stuck in the print queue?
What happened?

OK, sorry about that.
1. Uninstall the HP softtware using the uninstaller in the Hewlett-Packard folder.
2. Restart your PC !!!
3. Go to Start > Control Panel >Printers and delete all instances of the printer that are left (if any).
Now, let's re-add the priner in this manner:
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing. Get its IP from a Network Test printed from the front panel of the printer.
2. Click >> Start >> Control panel >> Devices & Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • Apple Composite AV Cable no longer working on Ipad2 after ios8 update. Only getting sound, can you revert back to ios7 or buy a cable that will work any help would be appreciated

    Apple Composite AV Cable no longer working on Ipad2 after ios8 update. I'm only getting sound no video can you revert back to ios7 or buy a cable that will work any help would be appreciated
    Thanks

    The 30-pin connector on the iPhone 4 dock might not have all the connector pins to do video.
    I'm 99% sure the Universal Dock does have the pins (and therefor supports video out).

  • I use a two button mouse with my Mac Book Pro.  It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page).  Anyone know how to fix this?

    I use a two button mouse with my Mac Book Pro.  It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page).  Anyone know how to fix this?

    First sentence in OPs question:
    I use a two button mouse with my Mac Book Pro
    I guess the track pad settings would look similar to my screen shot?
    Regards,
    Colin R.

  • Microsoft Word 2008 refuses to work for me after installing the most recent Mavericks update, 10.9.1. It is 2008, yet Excel and Powerpoint work just fine. Help!

    Microsoft Word 2008 refuses to work for me after installing the most recent Mavericks update, 10.9.1. It is 2008, yet Excel and Powerpoint work just fine. Help!

    I suggest you do one of two things:
    1. Upgrade to Office 2011 for OS X.
    2. Try the freeware, Libre Office.

  • The forward, back, refresh, and stop buttons are not working. Even after installing the latest version. Anyone else having this issue?

    The forward, back, refresh, and stop buttons are not working. Even after installing the latest Firefox update. Also my home page stopped loading upon startup even tho I have it setup to do so. Anyone else experiencing these issues? This is my second request for help and of course, Firefox on-line support is always closed.

    Those are all symptoms of a problem with the places.sqlite file, for details see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

  • Send & Recieve functionality not working with  WebDav after installing Acrobat XI

    Send & Recieve functionality not working with  WebDav after installing Acrobat XI for PDF.  Acrobat XI is complete installations(Trial Version).

    Hi Kiro ,
    Did you try opening that file in any other browser ?If not ,please try doing that once and see if that  works for you.
    Try Repairing Acrobat once and see if  that helps.
    Launch Acrobat>Navigate to Help>Repair Acrobat Installation.
    Regards
    Sukrit Dhingra

  • Xcode 3.2.3 is not working after installing on Mac 10.6.3?As when I start Xcode it is giving error"An unknown installation error occurred"

    Xcode 3.2.3 is not working after installing on Mac 10.6.3?As when I start Xcode it is giving error"An unknown installation error occurred"
    provide solution.

    Well I didn't enter a hostname from my ISP, but I did need to enter as a Host Domain the sub-domain (CNAME) that we use for our server. Don't know all the proper terminology, but I hope that's clear enough to someone to help. As soon as I did that, it worked again.
    Thanks for the tip,
    W

  • Zoom in and out is not working in folders after installing Lion OS

    Zoom in and out is not working in folders after installing Lion OS. Did not understand why?

    Feature has been removed AFAIK. As far as zoom is concerned, the new operating system has been..whatever the opposite of optimized is...pessimized?

  • Webmail is not working internet explore after installed sp3 exchange 2007 roll up 15

    webmail is not working internet explore after installed sp3 exchange 2007 roll up 15 but mozill firefox webmail is working fine

    Hi,
    Does the issue happen to all users? What’s your IE version? Is there any error when you access OWA 2007 in IE?
    Please click Compatibility View settings in your Internet Explorer. Then, add the OWA site to the list of sites to be viewed in compatibility view and check whether the issue persists.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Text-to-speech no longer working in any PDF apps in Mac 10.8.5.

    Text-to-speech is no longer working in any PDF apps in Mac 10.8.4/5.  Does anyone know the software component that passes highlight text over to the speech synthesiser?   How is this process different in PDF's compared to any other text format?
    So far I have tried Preview, Skim, PDFView, Safari, Evernote and Adobe Reader with the result: silence.  The only defference being Adobe Reader which speaks the name of the document and not the highlighted text.  I've re-applied the Mac OS10.8.5 como-update, fixed prefs, ran FSCheck and changed user.  I've tried every method of triggering the text-to-speech function (including custom scripts). Text-to-speech works perfectly in every other respect exept when working with PDF's. When Maveriks arrives I will do a clean install and rebuild my data manually which I'm pretty certain will fix the problem but it would be extremely rewarding to find an actual solution and learn something in the process. 

    Rawr! I got it to work, sort of. I think I tried so hard because I hated the thought of using alsa-oss. And I discovered a couple bugs in spd-conf! Does anyone care? lol
    Basically, I redid my TTS-related configs & put them under ~/ instead of /usr/share, and ran "festival --server" & "speech-dispatcher -s" as a normal user. I also added myself to the "audio" group somewhere along the line, but I don't think that was the issue.
    I'm almost afraid to reboot, because, although speech-dispatcher can be started at boot-time through rc.conf's DAEMONS array, I don't think festival can---at least, not in the same way as it can on distros that have the script /etc/default/festival. I'm about to see if I can track down that file, and hope I don't break everything somehow.
    KTTSMgr still doesn't see any synthesizers, but I got past the "dummy module" message. Now I'm hoping I'll get some help from someone who actually knows what to do (as opposed to me).
    Take care, all
    H
    P.S One small complaint: Although my speechd.conf specified port 6561, speech-dispatcher's tests showed that it was looking for a connection on port 6560 first, before scanning to find the real port. I had to change to port 6560 to stop the behaviour, even though I never customized the port number in the first place.
    Last edited by cautha (2010-05-10 10:53:55)

  • Can No Longer Get Camera Photos After Installing Mountain Lion

    After installing Mountain Lion, I am no longer am able to see pictures from my digital camera thru the USB port.  This camera has worked for years with my iMac, but not anymore.  Anybody else having this issue after installing the newest system?
    Dick

    Paul_31:
      I have not tried to import the photos directly into iPhoto.  However, I did remove the SD card from the camera and plug it into a USB card reader, and my iMac would NOT read the photos that way either.  I took the camera and plugged it into my Win. 7 laptop and the pictures showed up nicely, so I know the camera and the card are Ok.  My iMac has been working strangely since I installed Mountain Lion.  I'm getting lockups using iMovie too.
    Dick

  • Flash no longer working on Firefox after update

    Moments ago I installed the Flash update after it came up on my screen asking to update, after doing so Flash is no longer working on Firefox, it works fine on other browsers. I cant view videos, look at flash objects etc. It was working perfectly fine before up untill the update. Anybody know how to resolve or fix this issue?

    Dear Chris:
    Yes, turning off Protected Mode indeed solves the problem!
    Specifically, we today (June 9, 2012) installed the new Adobe Flash v. 11.3.300.257 on several Windows 7 PC's, all running Firefox v. 14 (Beta), and none of the Firefox installations would confirm that the installation was performed successfully.  For example, the Adobe Flast test/about site, https://www.adobe.com/software/flash/about, would not work.  And, likewise, YouTube videos and other Flash-encoded videos did not work either.
    So, we tried your suggestion to disable the new Protected Mode, and it worked.  That is, every single machine on which Flash did not work in Firefox now functions perfectly.  So this conclusively demonstrates that there indeed is some kind of bug in the implementation of Protected Mode.
    Can you please let me and the other Adobe users know when this is fixed.  Thanks.
    Also, could you likewise let us know the risks of turning of Protected Mode (although we really don't have any choice, as Flash will not work on Firefox with PM turned on).
    Thank you.  Much appreciated.
    Kind regards,
    Evan Katz
    (formerly Contributing
    Editor of  Personal
    Computing Magazine)

  • HT1338 Older Mac running Tiger 10.4.11. and Flash no longer works. Upgraded version installed and left me without any Flash support at all??

    I recently attempted to upload the latest FLASH PLAYER. My older Mac (G4) works wonderfully as a desktop computer, so I NEED a flash player
    badly, but now it says that Adobe no longer supports older Mac Power PCs! What's up with that?? Some of the best and most desirable computers
    ever made are of no interest to Adobe?
    I there a work-around to eliminate the need for Adobe's Flash Player?? Another Flash version......can you say Macromedia? HELP

    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 is for Snow Leopard onwards.
    * Unhelpfully, if you want the last version for PPC Macs, you need to go here:  http://kb2.adobe.com/cps/142/tn_14266.html  and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here:  http://kb2.adobe.com/cps/838/cpsid_83808.html
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
    But possibly that only works with Leopard.

  • Latest EyeTV doesn't work with remote after installing latest candelair, 1.20 no option in preferences to activate snow leopard?

    After upgrading to Snow Leopard my mac remote no longer works with EyeTV. Have checked EyeTV is the latest version, have also installed the latest Candelair which other users have advised needs to have snow leopard activated in the preferences but on my version there is no mention of this in the preferences pane.
    Just lists...
    Driver version 1.20 installed
    The remote control infrared receiver is enabled
    This computer only works with the remote with ID 27 (after I paired it)
    Issues with your remote?
    Can anyone advise?
    Thanks

    So, I figured it out myself. Way back in time I had set up some ipfw rules that I had completely forgotten about, which included this:
    01000 allow ip from 192.168.0.0/16 to me dst-port 5900 in
    Since I switched to the AEBS, of course the IP range changed to 10.0.1.x, so ipfw was blocking it. Problem solved.
    Now I just need to figure out why my AEBS keeps crashing..

  • Adobe reader has stopped working error message after installing reader XI on windows 7

    Adobe reader has stopped working error message when loading reader after installing reader XI on windows 7.
    Does anybody know why ?

    Dear Pat,
    Thank you for your reply.
    It is Ver. 11.0.06 for Acrobat XI
    No, I can't open the Reader at all.  The error message box popped up immediately when I run the Reader

Maybe you are looking for

  • PDF output not printing specific Czech character

    Hi, On the XML template i have harcoded some Czech characters like, měna & Peněžní if any Czech character has small v on top of the character, then the report output prints as ? instead of that character. For examplae, měna & Peněžní in PDF output pr

  • No CRT Discusions ????? ... 17" Studio Display ?

    I still use my ASD 17" and am wondering about display resolutions. In the interest of screen real estate I switched from 1024 x 768 85 hz to 1280 x 1024 75 hz. Also switched to 1000's of colors to see if the refresh rate quickens - seems to. I'll swi

  • Exception aggregation in one CKF causing problem in Result row of other CKF

    Here is my scenario in 3.5x BW: I have a CKF A which has exception aggregation (to select maximum value) based on a reference characteristic.. Now this CKF A is used in another CKF B and a third CKF C is being calculated based on CKF B. SInce I am us

  • Application Setup (FlyCast)

    I just had internet access set up on my Curve 8300 series and am stumped.  It asks for APN information and I have no idea what that is.  Is this something I should call my service provider about or can I find it on my phone somewhere?  I'm particular

  • Auto capitalisation of the letter I? How can I make this work?

    My macbook Air is great but it doesn't automatically capitalise the letter I which is painful when writing assignments as they are so easy to miss! I tried making a shortcut but you must have more than one character and no spaces. Is there a setting