6513 CATOS/IOS mixed mode switch what does vlan snmp counter indicate

We have a CAT 6513 switch running mixed CATOS/IOS with IOS on router side. We use MRTG to track the vlan SNMP counters on the router side.
What does the vlan snmp counter actually indicate say for the default vlan1 interface.
Dave

Similar Messages

How do I resurrect my iPhone in recovery mode? what does it mean and how do I make it recover?

How do I resurrect my iPhone in recovery mode? what does it mean and how do I make it recover?
Please help. Appreciate your assistance.

It just means that you want to reset it for some technical reason by holding down the lock and home button for a few seconds till it shuts downs and the apple logo pops up which then you let go. Note: nothing on your phone will be deleted.

What does TR and TH indicate?

Whenever I create a CSS sheet from a template it usually
assigns TH a property. I know that TD indicates a table cell but
what does TH or TR indicate?

rmiman wrote:
> Whenever I create a CSS sheet from a template it usually
assigns TH a
> property. I know that TD indicates a table cell but what
does TH or
> TR indicate?
header and row
Thierry
Articles and Tutorials:
http://www.TJKDesign.com/go/?0
The perfect FAQ page:
http://www.TJKDesign.com/go/?9
CSS-P Templates:
http://www.TJKDesign.com/go/?1
CSS Tab Menu:
http://www.TJKDesign.com/go/?3

What does the small circle indicate on thumbnail in develop module?

When I roll over a thumbnail in the develop module it highlights a small circle with dotted line. What does that do?

Clicking the button makes the image a part of the Target Collection or removes it from the Target Collection if it is already there.

What is the recovery mode and what does it do to my ipad3/iphone5

I have recently synced my photos to my regular computer- a month ago- and then the hard disk of the computer had burnt and my photos are gone because i didn't turn on the back up option before all of that happens
I am trying to get them back because they are so important to me and i thought that the recovery mode would help but i don't know even a little about it

iPad Photo Recovery: How to Recover Deleted Photos
http://www.iskysoft.com/iphone-data-recovery-mac/ipad-photo-recovery.html
How to Restore Lost or Deleted Files from iPad
http://www.iphone-ipad-recovery.com/recover-ipad-mini-files.html
How to Recover Deleted Files from iPad
http://www.kvisoft.com/tutorials/recover-deleted-files-from-ipad.html
iSkysoft Free iPhone Data Recovery
http://www.iskysoft.com/iphone-data-recovery/
Recover iPhone/iPad/iPod touch lost data, Free.
Free recover iPhone/iPad/iPod touch lost contacts, photos, videos, notes, call logs and more
Recover data directly from iPhone or from iTunes backup
Preview and recover lost iOS data with original quality
Wondershare Dr.Fone for iOS
http://www.wondershare.net/data-recovery/iphone-data-recovery.html?gclid=CJT7i9e 6gb4CFcvm7AodbUEAJQ
Recover contacts, messages, photos, videos, notes, call history, calendars, voicemail, voice memos, reminders, bookmarks and other documents.
 Cheers, Tom

IPod touch top front of my screen says, "it Safe Mode". What does that mean?

Front of my screen says, "it Safe Mode". Now when I try to change my theme in Winterboard and respring it wont change anything. What do I do?!?!

Touch where it says "It Safe Mode". A Window should appear informing you about the Safe Mode. At the bottom, hit "Reboot" and wait.now your iPod will funtion as normal again.
If not, then go to Cydia and delete anything you just installed, as it may be the cause of the Safe Mode. Then try rebooting again the iPod.

What does the error 104 indicate

tying to download a game to my ipod, and it is giving me an error message of (error 104, please try again later)
What should I do to get pass this error message?

OK found a solution!
It is really lame!
NEVER add a reminder in iCal dragging them into the Week or Day view!!!
Change to Month view and then drag the reminder on the desired day!
You can now change to Week or Day view and move the reminder to the selected hours.
Please help share this solution and click like to get Apple to finally fix this issue, which is clearly on their side.
Thank you

What does Error message (-5000) indicate

I get this error message when I try to update my Iphone 3GS

Appname:itunes.exe Appver.10.1.0.56
That is basically saying that it's iTunes version 10.1.0.56 that is having an error.
Are you also seeing a ModVer and a ModName? If so, what are they? (Precise spelling please.) With any luck, they will give us some more insight into what's causing the iTunes error.

What does this crash log indicate the problem is?

ri Dec 9 12:28:18 2011
panic(cpu 1 caller 0xffffff7f8092a04f): NVRM[0/2:0:0]: Read Error 0x0061002c: CFG 0x2927ffbc 0x02133c82 0x00000000, BAR0 0xd2000000 0xffffff80f2efd000 0x096a80a1, D0, P3/4
Backtrace (CPU 1), Frame : Return Address
0xffffff80f2debc80 : 0xffffff8000220702
0xffffff80f2debd00 : 0xffffff7f8092a04f
0xffffff80f2debd90 : 0xffffff7f80a1a13c
0xffffff80f2debde0 : 0xffffff7f80c1d534
0xffffff80f2debe00 : 0xffffff7f809e2d7b
0xffffff80f2debe20 : 0xffffff7f80a8b0b6
0xffffff80f2debe90 : 0xffffff7f80916f1e
0xffffff80f2debf40 : 0xffffff7f808d0b86
0xffffff80f2debf70 : 0xffffff800023db2c
0xffffff80f2debfb0 : 0xffffff8000820057
Kernel Extensions in backtrace:
com.apple.NVDAResman(7.1.2)[3B24E838-5E73-362B-97FA-239F5AEE7D81]@0xffffff7f808c 9000->0xffffff7f80ba2fff
dependency: com.apple.iokit.IOPCIFamily(2.6.7)[6D54F06A-46B7-37FC-AF22-DE68DC18A1A3]@0xffff ff7f80845000
dependency: com.apple.iokit.IONDRVSupport(2.3.2)[6517D9A6-58F5-3CFC-B021-C882306150D5]@0xff ffff7f808b7000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[55FF26D3-292D-3B4B-8AB7-1D25C8B4313B]@0 xffffff7f8087f000
com.apple.nvidia.nv50hal(7.1.2)[2E84958C-1EEC-316B-9F7A-68C368F83476]@0xffffff7f 80ba3000->0xffffff7f80ec4fff
dependency: com.apple.NVDAResman(7.1.2)[3B24E838-5E73-362B-97FA-239F5AEE7D81]@0xffffff7f808 c9000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: iMac9,1 (Mac-F2218FA9)
I've got a zillion of these. NEVER once with snow leapord. I've reported this to apple near every time i've gotten the error This is a fresh install. I assume it's my graphcis card? It's a Nvidia GT 120 256MB

Yes, NVIDIA card. Reporting the error helps because the more reports Apple gets the more likely they will focus on it. But don't expect a reply.
Make an appt. at the Genius Bar of an Apple store, it may need to be replaced.

What does this IPS message indicate?

evError: eventId=1229364010346777529 vendor=Cisco severity=warning
originator:
hostId: IPS
appName: cidwebserver
appInstanceId: 22081
time: Dec 18, 2008 19:30:56 UTC offset=0 timeZone=-8
errorMessage: received fatal alert: certificate_unknown
Messages, like this one, in the category - receipt of TLS fatal alert message - were logged 1795 times in the last 3601 seconds. name=errWarning

Soemthing is try to connect to your sensor using an incorrect TLS certificate.
This error is very common in situations where your sensor now has a newer TLS certificate (usually becuase of re-imaging the sensor, or creating a new TLS certificate because the older one expired).
Go to all of your management station boxes and ensure that they have been updated with the sensor's new TLS certificate.
If you are not sure which management boxes may not have been updated, then run the packet display command on the sensor's management interface and look to see which IPs are attempting to connect to your sensor's web server.

What does this DTP error indicate?

I am trying to correct this error in DTP:
"Error in formula function (routine 63), record 37816"
"Records filtered becasue records with same key contain errors"
This is a data error but not some bad or invalid characters. I am not sure how it can be corrected based on above message
Has anyone come across such an error - how was it resolved?
Thanks!
Edited by: BI Quest on Aug 30, 2008 9:20 AM

Hi,
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term fix you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
Also in Tcode RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
In RSKC you can add upto 45 characters
if you add any character in RSKC it will autometically update into RSALLOWEDCHAR table, But in this table you can add upto 72 characters,using ABAP program..
Refer
Invalid characters in SAP BW 3.x: Myths and Reality. Part 2.
Invalid characters in SAP BW 3.x: Myths and Reality. Part 1.
Steps of Including one special characters into permitted ones in BI
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 u2013 u201CAllowed characters in the BW Systemu201D
Sample cleansing routine (#)
Help loading char EQUIP#1111#TAG#3311 SN#A01040 * into Cube
Invalid character error while activating DSO - Please help
Regarding Special Characters
how to prevent bad charectors from source system
Regards
Tg

WCS AP Setting - Antenna Mode - What does it do?

Hello,
I'm working configuring our wireless networking. When setting up AP templates in WCS I came across a setting that I'm not sure of and haven't been able to find anything about.
What is Antenna Mode and what does it do? There are three options that I've seen..
Sector A
Sector B
OMNI (Sector A and Sector B)
Does anyone know what these settings do?
Thank You!
Eric

Sector A = "Front"
Sector B = "Rear"
Omni = Front + Rear radiation pattern
Good Luck
Scott

Private_strands 12 message: what does it mean?

Hello,
At every log switch we notice the message
"Private_strands 12 at log switch"
What does this message mean? Everything runs OK, so it only seams to be an informative message...
Thanks & regards,
Jan.

System.out.printin("Hello from Brent"):should be
System.out.printin("Hello from Brent");Java source code line terminators are semi-colons

Sleep LED - What does Solid on mean?

Hello:
I am new to OS X and my MBP. It's a late 2010 Unibody purchased just a few weeks ago. I have an external Apple BT trackpad and keyboard (which I love... Takes a lot of wear and tear of the mac unit when I am using at home).
Anyways, today I noticed the MBP screen was black as I had not uised it for maybe 10 minutes. The white LED was on solid. I know when it's slowly fading in and out that the computer is asleep. I assumed it was in sleep mode and tried to wake it. It did not wake up clicking keys or the trackpad. I them went onto the main kayboard and started clicking many different keys. If did eventually come on. Not sure what key did it.
When I manually put the computer to sleep from finder, the LED goes to solid on and then changes to blinking slowly.
It seems that since adding a spinning HD to the Optical bay, the system sleeps in 2 phases. Light on until spinning HD has stopped and is safe.
My question after that long description is what does the Solid LED indicate?
Thanks,

No, the white LED slit to the right hand side of the MBP has three states:
On - System is awake and active (even if screen has gone off due to energy saver setting)
Pulsing - System is in Sleep Mode using low power and can be woken by opening the lid (or touching a key if in Clamshell Mode - external screen and keyboard attached)
Off - System is OFF and will not restart until you open the lid and press the Power button.

Right Arrow on Table in schema listing...What does it mean?

IN SQL Developer I have a green right arrow on a table in the schema table listing. What does this mean or indicate?
TY.
* ----------------> *
* Table xyzx *
*************************

Hi,
As they say, a picture is worth a thousand words. If you cannot post a link to a screen shot, then at least state the version of SQL Developer you use, confirm whether or not you are talking about the Connections navigator view or Schema Browser (depending on the version), the table type that shows the green arrow, and so. Without such details, anyone attempting an answer will just be guessing.
Typically the rightward-pointing green arrow icon appears in the worksheet toolbar (large icon: Run Statement, small icon: Run Script). It also appears in the script output tab toolbar: if your original script's output is another script, then you can run it from the output tab. In very old versions of SQL Developer (1.2?), I recall that the green arrow icon displayed directly on each worksheet's tab. So if you double-clicked to open the object viewer for a table, it would appear to the right of worksheet tab, so the green arrow on the worksheet tab points at the object viewer tab.
But that's me just guessing.
Regards,
Gary
SQL Developer Team

6513 CATOS/IOS mixed mode switch what does vlan snmp counter indicate

Similar Messages

Maybe you are looking for