6520 Horizontal white stripes in yellow test bar

My 6520 all in one printer doesn't print yellow like it should. I ran the utilities and replaced the cartridge with another new HP cartridge and it still has horizontal stripes in the yellow test bar.

Hello dickhamlet,
Welcome to the HP Forums.
It appears that you're having an issue with the yellow ink printing out correctly with your Photosmart 6520. I will do my best to help you with this.
I would recommend starting with this document: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages. If you have done all of those steps already, or are still unable to get the yellow working after doing them. Then I would suggest contacting support for further assistance.
HP Technical Support, North America 1-800-474-6836. For all other regions click here.
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Similar Messages

Flickering horizontal white stripes on screen

Full Apple Hardware Test passed.
Power Management Unit PMU is reset.
White horizontal stripes covering the picture appear sporadically.
Sometimes entire screen gets white and returns to normal after a while.
Sometimes entire screen is covered with vertical gray scale stripes.
Stripe flickering is synchronized with hard disk or DVD-ROM drive sound.
PowerBook G4 Titanium Mac OS X (10.3.9) 400MHz

Try finding someone who can look at it, thats what i did with my ipod and they fixed the screen and its good as new, may be you need a new screen even tough the screens not smashed or is it?

Iphone 4 screen is black and white stripes-.

all the sudden the screen of my iphone 4 won't turn on any more. It plays music. When I plug it to my computer it looks fine, but the screen is only black with horizontal white stripes. Anything I could do to repair it ?

That's a hardware failure. make an appointment at the genius bar.

White screen with yellow stripes on start up?

On start up my screen is white with vertical yellow stripes and stays like that. I've tried re-booting but no good.

You are very welcome.
I hate having to replace computers, get attached to them, but having the geniuses check this one out will save a lot of frustration. A couple of these past discussions went on and on and on until the person gave in and did what you have done. If it is hardware there just isn't anything on-line help can do about it. Good luck tomorrow and if you have a chance, post the results...we are all fellow users on here and like to hear the resolution to problems.

"A graphics problem has been detected" Macbook Pro screen white with horizontal red stripes

This issue arrived out of no where. I'll be using my Macbook Pro then all of a sudden the screen starts glitching and i can't control anything so I'm forced to power off my computer. When I turn it back on the screen will display the Apple logo with a white screen and horizontal red stripes running through the screen (as pictured below). I have to keep shutting down the computer and powering it back on until it asks me to reset my Filevault password then it might work.
After I reset my password it finally restarts and appears to work with the image below displayed on the screen. I spent over 2000 dollars on this laptop, I shouldn't have to wonder if my laptop will work long enough to get something done or have to keep resetting it for days and be computerless. This is crazy! I hope Apple starts paying attention to this issue as I've seen multiple posts about this issue coming for other owners of MacBook Pros from 2011.

The logic board is faulty and will have to be replaced.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

HELP!! MY IPOD SCREEN DIMMED WITH WHITE STRIPES AND BLACK BACKGROUND

im wake up this morning and find out that my ipod got boot loop, it's stuck in apple logo. i try to connect it to itunes and reset it. its work, i can hear charging sounds, and unlock sounds. and also im trying to test camera and seems it worked (i can hear camera sounds) and after taking 1 picture, the camera show up but with these stripes, but i cant access picture library. but when im looking at the screen, i just see black screen with dim white stripes in the middle. i was thinking if my screen just broke or something. but the apple logo appear good without any scratch or stripes.
Here's the picture
these stripe dim alternately. i only can see these two stripe
Some one please help me about this problem. i have no idea how to fix this. sorry for my bad english

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Black and white stripes? Help!

Hello!
I confess I'm a PC user (with plans to get a Mac in the near future, if that redeems me). Therefore I'm not especially familiar with Mac and its operating system, and when a problem arises I'm pretty helpless. I work in a technology lab at my school, and one of our Macs is encountering a problem.
The computer is perpetually displaying black and white horizontal stripes, with a spattering of multicolored pixels all over. I've tried turning the computer off and back on again (because that's about the depth of my knowledge of fixing a problem on Macs), but the computer doesn't even seem to try to boot; almost immediately after pressing the power button, I'm greeted with these hostile little black and white stripes.
I've searched these forums trying to find a solution, but have been unable to find anything. Any help or suggestions would be sincerely appreciated!
Thanks! =)

To The Apple Discussion Boards!
Which "model" & "generation" G5 iMac do you have?
Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
Thank you
In the meantime try the following:
System Preferences>Display>Color
Click on the purple button with the black ? mark in the middle. It's located at the bottom right hand corner.
The help window will pop up. At the very bottom of the page click on the Color Sync Utility link.
Profile First Aid window should pop up. Follow the instructions & run the test.

My iPod touch screen went fuzzy with pink and white stripes

Hello! I really appreciate if anyone would tell me what's wrong with my iPod touch.
I have been using my iPod touch for less than a year, and honestly, I have quite a bad habit: I always use it for playing games. And sometimes, I even use it while it is charging. Usually it's fine, nothing went wrong, so I keep doing the same thing sometimes.
one day, I'm visiting my relative and tried to charge my iPod. Since my iPod doesn't have an adaptor, I usually charge it using my laptop (the seller told me to charge it in a laptop/computer). One day, I borrowed my cousin's laptop to charge my iPod, but she only gave me an adaptor (not made for iPod or any apple products, but it fits so I thought it's okay). But the next day, I found out that my iPod went off by itself and I know that my battery isn't low.
I Tried to charge it using my laptop at home, but it still went off! Also, it went normal in my laptop (the iTunes appeared automatically, as a sign that my iPod is charging). So, I tried to restore it and I worked (at least I thought so), until I saw my screen went fuzzy (pink and white stripes). So, almost everyday I turn off my iPod, turn it on again, wait for a while, then use it normally. Usually it lasts 'normal' for hours, but it will still be error as usual.
So, my question is:
What makes my iPod touch screen went fuzzy?
Is it because I used it while charging?
Is it because I charged it with an adaptor that is not made for Apple products?
please help me, I don't know what else to do! I have restored it, I didn't download many applications like I used to before, and I left it alone when I was charging (I didn't play it while it's charging any more), and I even didn't turn on the Wi-Fi if I'm not using it (I almost NEVER turn off the Wi-Fi before my iPod touch went error)
Thank you for answering..

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

While using my Iphone 5, all of a sudden black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

While using my Iphone 5, all of a sudden black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

Try resetting your phone, hold the home and sleep/wake button down until the apple symbol comes up, then release. If that doesnt work, you may have damaged your phone and need to take it to an apple genius bar.

Form Filler Yellow Task Bar Link Does Not Open task or do anything SharePoint 2010 InfoPath 2010

Form Filler Yellow Task Bar Link Does Not Open task or do anything (SharePoint 2010 InfoPath 2010)
Using a SPD workflow to run a approval process. This is a non-browser form. User receives task notification, opens form in IP Form Filler and sees yellow task bar notification. User Clicks on open task, nothing happens... OS = XP, On Win7
= We get a never ending download box, and several logon security windows
Attempted Fixes
Clear
InfoPath Cache
Workflow History Looks good

Hi,
I understand that when you click on Edit this task in the message bar in InfoPath 2010, nothing happens. Does this happen when you open the email which contains the ‘Edit this task’ link?
If so, you can try to check whether this key is in your regedit. If so, you can delete this key and have a test.:HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\ActiveX Compatibility\{00000000-0000-0000-0000-000000000000}
Back up the regedit keys before making any changes. For more information about backup and restore the regedit, please refer to these sites:
Fix “Edit this task” In Outlook 2007:
http://vettekerry.wordpress.com/2008/06/11/edit-this-task-in-outlook-2007-doesnt-work/
How to back up and restore the registry in Windows XP:
http://support.microsoft.com/kb/322756?wa=wsignin1.0#method1
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

White stripe on black printing OfficePro8500

Hi,
I was printing my greetings cards, and an white stripe appears on the black printing.
I Think that the printer have to be re calibrate, but how to do it.
Thanks and happy new year
Hubertus

It shouldn't be normal but it does happen.
I have to say that I do have a slightly brighter band across the top of the screen myself although it is even all the way across and is less than a few pixels in size. Not to mention it's lessening as time goes on. Fortunately it doesn't bother me at all as it's masked by the menu bar.
If it truly concerns you take it into a store for them to look at it else contact AppleCare.

AF shows Green sq - Afterwards Display shows white sq with yellow sq - with image often blurred why

New powershot 320hs - I'm getting the green auto focus bars when shooting a image, but afterwards the display detail shows a white sq with yellow inside square on the image I shot and the second tiny image for AF check tells me it is not sharp. This happens often when shooting and I have to shoot several pictures of the same image before I get a sharp picture. I noticed better results with face detection on but I'm shooting plant images so I don't understand why this is happening? I have had other elphs without this problem.
Rose Gatto

Hi ballina!
Thank you for posting.
There are certain limitations on how close to the subject the camera can be and still achieve a focus lock. The yellow square indicates that the camera was unable to focus on the subject.
How close to the subject is the camera when you are focusing on it?
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Yellow security bar in IE

Has anyone figured out how to deal with the yellow security bar in IE when linking to MS Word files (for example)?
We've got a file linked from a page at the end of the project for the user to download. They click the link, the yellow bar pops up, they click and choose Download File, and the browser reloads the page (thus restarting the project from the beginning). The user has to re-navigate to the final slide to get back to the download link, which now works.
We're using Open URL or File to trigger the download. Is there a better option?
Thanks

Hi there
You are saying you deploy this to 50,000 users? Certainly that must mean they access the content via a web server, no?
It's my understsnding that YOU, as the Captivate author, will see the Yellow Information Bar on your own PC when you are testing by running the content from your local C drive, but once you copy the content to a web server the end user should not encounter the Yellow Information Bar.
Are you saying that when end users access the content that they encounter it there?
Cheers... Rick

How to Get Rid of White Stripe At Top of Firefox Browser

I have the current version of Firefox installed. Recently, perhaps with the most recent install, I'm not exactly sure, a white stripe appeared at the top of the browser, right under the search and URL boxes at the top of where websites would normally show, a white stripe about a 1/2 inch thick has appeared. Not on every single site, google.com works fine, but for example, it blocks out the home, connect, discover and me tabs on Twitter. Or if you go to mozilla.com, the tabs at the top of the mozilla site briefly show, then are blocked by the white bar. You can't click on any of them, even if you have your mouse pointed at the right spot. You can refresh the screen and they'll briefly show again, but not long enough for you to click on anything.
I've run a number of search engine queries trying to find out how to get rid of this problem, but I'm only finding resolutions for webmasters, not for end users who have to deal with this problem on the other end of the browser.
Anyone know how to get rid of this nuisance? I'm about ready to uninstall Firefox because its useless on many sites with buttons and tabs on top.

I shut down all but one of the extensions, and that seems to have resolved the problem. Thank you!
Now to figure out which extensions I need, and which I don't, because I don't have a clue. I don't remember installing most of these, I only recall one or two (nothing looks spammy like funmoods, but still don't remember when or why these were added...)

Yellow render bar in Premiere Pro CS6

hey there,
quick specs:
HP Z820, 64GB RAM, NVidia quadro 6000 (alongside with a BlackMagic 3D extreme for monitoring), ext. SAS-RAID, Windows 7 64bit, Adobe PP CS6.
the issue is quite simple from the outside:
any codec i slam into a new sequence gives me yellow (render) bars.
doesn't matter if i customize the sequence or right click "new sequence from clip" (which i assume fits my sequence settings to my clip settings)
the only codec that doesn't give me yellow bars is mpeg2. (really..?!)
to check i turned the CUDA engine OFF - red bars immidiately.
and even with yellow bars (which PP should be able to play back at least i get the choppiest playback sometimes)..
but as you see it shouldn't be a hardware problem - so what am i doing wrong or didn't i get the idea of creating sequences?
any suggestion appreciated.
s.

Harm Millaard wrote:
If the codec you use is not supported in a preset, you get the yellow bar. So what? If it plays fine, then there is nothing to worry about. With AVCHD 1080p/50 and 5.1 AC3 sound you get a yellow bar, so what? It plays fine.
hey harm,
"so what?" is not really a term that i often use. when i encounter a problem, i try to fix it or at least push as far as i can push to get the optimum under the given circumstances. "works anyway" doesn't really cut it for me.
i want to understand why there's the need to render despite the fact
- that all my hardware and software is supposed to eliminate exactly this
- that other companies solved this problem years ago
- that adobe promotes a product that should do the job, but obviously doesn't
and it actually does not playback fine. sometimes (=usually) the playback is choppy, sometimes the playhead jumps back to start without any reason and a few other problems i came across.
i understand that adobe PP is not in the game as long as AVID is for example, but they claim to have a professional product (at least the name suggests it but as far as i am concerned if you really put PP to the test it tends to bend and sometimes to break.
as much as i love dynamic link (main purchase reason) - i just can not run sensitive projects on it. or, before i do i need to understand why these things happen.
you totally don't have to but i hope you understand my position.
s.

6520 Horizontal white stripes in yellow test bar

Similar Messages

Maybe you are looking for