660 Twin Frozr III 2GB multiple VGA monitors?

Hi, I am wondering if it is possible to attach more than one VGA monitor to this graphics card.
In my previous card (570 MSI Twin Frozr) I could plug both in via DVI adapters but the second DVI port does not work on this card (I believe because it is DVI-D not DVI-I) and I cannot find a suitable adapter to make the VGA work with this port or any of the other ports on this card (display port, hdmi).
Does anyone here have any suggestions how I can plug in a second VGA monitor in to this card's ports? If not I may have to go back to my 570 which I would rather not.
Thanks

Thanks guys, for some reason I thought it was impossible for the other ports to display non-digital signal! I'll look for a displayport to vga adapter on amazon now.
Thanks again.

Similar Messages

  • [Tech Help Needed] GTX 660 Twin Frozr III 2GB SC Fan Stops Working

    Hello everyone.
    It's extremely rare for me to have computer issues, but this time it happened.
    MSI GTX 660 Twin Frozr III 2GB SC, and here's the issue:
    Whenever i turn on the computer the gpu fans spin for around 5seconds and after that they stop, for now they seem fine since i'm usually idling for the 1st 30minutes or so, but when i start playing games the gpu temperatures skyrocket to around 60-70 idling  in-game and the fans just won't start working, yes the the psu cables are connected to the gpu, bla bla ( duh ). i've had the gpu for around 2years and it worked fine but all of a "sudden" the fans just seem to not work and it starts getting very high temperatures, i've read someone complaining about the same issue and he was told to replace his gpu bios with some uefi bios and he said that the uefi update solved his fan issues which were the same as mine.
    Now my problem is, i've never done that "Bios Flashing" and things like that and i don't know if my Board is compatible. If it worked for that person then it should work for me since the symptoms are literally the same. I've tried uninstalling the gpu drivers completely and installed again, the issue still persists.
    If it's of any reference i own the following setup:
    MB : ROG Asus Crosshair IV Formula
    CPU : AMD Phenom II X6 1090T BE
    GPU : MSI GTX 660 Twin Frozr III 2GB SC
    RAM : 2x4GB G.Skill Ripjaw X 1600Mhz
    PSU: Corsair GS 700 Gaming Series ( yes its more than enough and good enough )
    I've literally had no problems whatsoever with my system for a few years now, and just like that the fans don't want to work, i can play games and what not, but at around 70ºC with no fans running ..... i've tried using MSI Afterburner to boost the fan speed, the fan speed setting gets set but the rpm stays at 0. i also made it to run on windows start and its still at 0 RPM.
    Will the uefi bios solve my problem like it did to the other person with the exact same issue?
    Thank you for your time spent reading, hopefully it will be solved.

    Still no reply after 2 days, impressive support right there ... every other post that came after got replied ...
    Anyway, if its also relevant about my issue :
    - Fans briefly spin after i press the power button to turn on my computer and stop right after around 3-5s and never spin again until i shutdown and power on again for the same brief spin.
    - If i force the fans on Afterburner to 90% or above ( 100% ) they spin and make unsupportable noise.
    Also if its of any relevance :
    N660 TF 2GD5/OC
    S/N: 602 - V287 - 050B1302044857
    At least provide me with the most up-to-date uefi/gop vbios or whatever that is, to see if it fixes my problem, otherwise recommend me a substitute cooling system that i can use ( a good one, not 3rd rated ) to replace the stock cooling in this because i don't have the money to get another card, and if i get one it won't be from msi for sure.
    Very dissapointed.

  • MSI 7850 Twin Frozr III 2GB

    Hi, I have MSI 7850 Twin Frozr III 2GB and I have a problem.
    I noticed a mild flickering in games like F1 2012, GTA IV (it flcikers in every game) but it doesnt look bad but it still shoudn't happen.
    What do you thin it could be?
    Driver are updated.
    Monitor is LG W2240 21,5 inch.
    Ask if you need more information.

    Did what you said, notnig happend.
    I fixed problem in only one game by turning vsync on in game adjustments.
    EDIT:
    I think this is the same problem as mine
    http://www.tomshardware.co.uk/forum/352321-15-7850-issues
    Any tips?

  • UEFI GOP BIOS Request MSI GTX 660 Twin Frozr III

    Hi,
    Requesting GOP UEFI BIOS for Msi GTX 660 Twin Frozr III
    S/N: 602-v287-04sb1210112009
    VBIOS: xxhttps://www.dropbox.com/s/1eccbxdh2ysw5rp/GK106.rom?dl=0
    Thanks a lot

    Quote from: Svet on 19-March-15, 01:07:05
    use this one
    https://forum-en.msi.com/index.php?topic=251786.msg1447440#msg1447440
    Thank you! it works)

  • What is the latest VBIOS for MSI GTX 660 Twin Frozr III OC?

    Staff would like to help, first of all sorry for my english, I'm from Brazil.
    I wonder what is the latest VBIOS for the model MSI GTX 660 Twin Frozr III OC?
    Model:
    N660 TF 2GD5 / OC
    S / N: 602-V287-04SB1208202320
    Another my doubt is:
    What is the difference of this model for Gaming Version.
    It has the possibility of transforming the MSI GTX 660 Twin Frozr III OC MSI GTX 660 Gaming?
    Thank you for your help.

    Quote from: Dragon16 on 20-May-15, 10:46:55
    Staff would like to help, first of all sorry for my english, I'm from Brazil.
    I wonder what is the latest VBIOS for the model MSI GTX 660 Twin Frozr III OC?
    Model:
    N660 TF 2GD5 / OC
    S / N: 602-V287-04SB1208202320
    This is the latest UEFI vbios: https://forum-en.msi.com/index.php?topic=251786.msg1447440#msg1447440
    Quote from: Dragon16 on 20-May-15, 10:46:55
    Another my doubt is:
    What is the difference of this model for Gaming Version.
    It has the possibility of transforming the MSI GTX 660 Twin Frozr III OC MSI GTX 660 Gaming?
    No, that is not possible. These are totally different cards. They have a different custom design with a cooler totally different and the GAming offering profiles that can't be used with an ordinary N660 TF 2GD5/OC

  • R6950 Twin Frozr III 2gb Problem

    Hi guys, got a problem with one of my cards that is in Crossfire..
    Setup - i7 920, 20gb Gskill DDR3 1600mhz, Asus P6T Deluxe, Corsair AX950w 80+, 2 x  R6950 Twin Frozr III 2gb Catalyst 12.3
    Problem - These card's have been fine for around 6 months working in crosfire. Last couple of days defects have started to appear and now one of the card fails to be reckognized. I have taken out the card and tried it in another system and the system wont even post. I have tried switching the fan profile to see if this helps but still no post. 1st card is working perfectly in my main system and other systems I have.
    Even bigger Problem - The shop where I have purchased the cards "SELEXIUM" last year is now bankrupt. Here is the article http://www.societe.com/societe/sarl-nextware-504241654.html
    So I really dont know what to do, I have logged a ticket with msi to see if they can help..
    Does anybody have experiance with MSI and returning cards directly to them in Europe ? Will they accept a RMA from a End User ?

    for europe, its only via reseller.
    contact near MSI office and explain the situation.
    >>How to contact MSI.<<

  • Requesting UEFI GOP VBIOS for MSI Radeon HD 7850 Twin Frozr III 2GB GDDR5 OC

    I've got two of these cards.
    Serial Numbers:
    602-V273-050B1212086274
    602-V273-050B1212085579
    Also, what is the easiest way to flash my cards?  It looks like atiflash can only be used from a DOS boot disk, and I don't know where I can get DOS boot files.  Is there an easier way to do it?  Perhaps from within Windows?  I flashed my nvidia card from within Windows without any trouble.
    Thanks much!

    V273 050 uefi can be found here:
    https://forum-en.msi.com/index.php?topic=167975.msg1229511#msg1229511

  • UEFI / GOP Vbis request for N660GTX TWIN FROZR III OC

    Hello there,
    please can you patch my bios for my gtx 660 twin frozr III?
    My current bios is here:
    [link]https://mega.co.nz/#!90pHFSKR!L7Dza1ENXyUNj5ho_QEReGq5hCgt21ItRF9aLNV MLMs[/link]
    Serial number:
    602-V287-050B1304093179
    Thank you for ypur time.
    Zyklon

    Thank you. I had to rename the file to 201.rom to be able to flash the bios with nvflash. I hope I did it correctly - I still do not have native resolution when I booting with clover bootloader. But when I boot to windows/osx the resolution is correct so it seems like it is working.
    Have a nice day,
    Zyklon

  • MSI P67A-C43 B3 and MSI GeForce GTX 660 2GB GDDR5 Twin Frozr III N660 TF 2GD5/O

    will MSI GeForce GTX 660 2GB GDDR5 Twin Frozr III work on MSI P67A-C43 B3 ???

    Yes.
    Make sure you have an adequate power supply.

  • MSI GTX 570 Twin Frozr III POWER Edition OC - Dual monitors IDLE higher temp

    I have MSI GTX 570 Twin Frozr III POWER Edition OC, when I attached second monitor to this card temperature in IDLE mode on this card goes higher from ~38C with one monitor to around ~45-6C with second.
    Card with attached two monitors do not goes in 2D mode, I readed its a nvidia bug and I should upgdate my BIOS.
    In desktop IDLE mode card with attached one monitor
    http://img401.imageshack.us/img401/3726/19936167.gif
    In desktop IDLE mode card with attached two monitors
    http://img851.imageshack.us/img851/1857/27227099.gif
    My BIOS version 70.10.27.00.01
    Is it available any newer bios for this card ?

    Quote from: PeterMac on 10-May-12, 01:13:08
    From 50MHz on GPU at idle desktop with single monitor to 770MHz!! with two monitors  for what ?
    to support the second monitor it seems.
    read the link
    http://nvidia.custhelp.com/app/answers/detail/a_id/2483

  • Two displays for MSI R6950 Twin Frozr III Power Edition/OC graphics card ?

    Is it possible to have two displays simultaneously connected to this graphics card:
    http://www.msi.com/product/vga/R6950-Twin-Frozr-III-Power-Edition-OC.html#?div=Overview
    The card has two DVI-outputs "DVI Output: 2 (Single-Link DVI-D x1, Dual-Link DVI-I x1)".  I can use one display at a time and the second display only shows "No signal" error. I would like to use two displays when playing PC games, is it possible with this craphics card? Both my displays have VGA connector cables, and they are connected to the card with an VGA/DVI adapter.

    Quote from: Svet on 19-January-12, 22:12:52
    what monitors you are using and what resolutions you're trying to use?
    Both monitors are old models: 1) Panasonic PanaFlat PF90 2) acer AL 707.
    I'm not sure what resolution I was using on acer when I tried to connect both monitors, but now I'm using PanaFLat with 1280 x 1024. Maybe I should try to set them both on 1024 x 768 and try again.

  • Can MSI Radeon 7850 twin frozr III be used on MCP73M01H1 (Napa) ?

    Hi guys,
    I just bought new graphic card (msi radeon hd 7850 twin frozr 2gb) and seasonic 650W power supply today.
    And when I put them together with other hardwares and turn on the power, the monitor doesn't not detect any signal (dvi).
    so I switched the dvi cable to the on-board graphic card then the monitor can display but the device manager only detects ob board graphic card.
    then I put back gt 130 and it works perfectly as before.
    then I tried putting 7850 back then same issue (monitor doesn't detect anything)
    I can see the fans are running on 7850. My friend tested it with his computer and it's working fine...
    Help pls? 
    My current specs are :
    Monitor: HP 2309m (1920x1080)
    Motherboard: MCP73M01H1 (Napa)
    CPU: Intel Core 2 Quad Q9400 2.66 GHz
    Memory: 4 GB PC2-6400
    Graphic card: msi radeon 7850 twin frozr III oc 2gb (previous one: GT 130 768MB)
    PSU: seasonic 650W (previous one: 350W)

    Yea. I've posted on their forum as well. But I was hoping the graphic card manufacturer will have info about the list of motherboards that support Radeon 7850 ??

  • R6950 Twin Frozr III PE freezes pc

    during world of warcraft after 30-120 minutes my computer completely freezes, tried everything updating drivers, replaced psu.
    now i`ve tried underclockign the card at reference card stock values: 800 core clock and 1250 memory speed.
    havent had any freeze after that! played for more then 6 hours    
    is this a faulty card and i have to rma it ? i dont want to be without computer for weeks :(
    p.s. card doesnt get any hotter then 55C

    CPU Q9550 quad 2,83ghz    
    Motherboard Asus P5E (Intel X38)   
    Memory 4x 1gb Kingston Hyperx DDR2 1066    
    Graphics Card MSI R6950 Twin Frozr III
    Hard Drive Kingston SSDNow V+ 128GB    
    Sound Card Soundblaster X-FI gamer edition    
    Power Supply Seasonic X-660 660W 12v 54A    
    Case Antec Solo Plus
    CPU cooling ASUS Silent Square    OS
    Win 7 X64    Monitor
    LG Flattron 27" + 24"
    i havent had any problems at all using my previous ATI 4870 card :(

  • GTX660 Twin Frozr III and FullScreen

    Hi,
    I have an problem with full screen bios and windows (in windows only without vga driver).
    If in bios i select uefi mode (with csm disabled) i see bios and windows in fullscreen, if i select "normal mode" (not uefi and csm active) i haven't fullscreen, then i have this problem only
    in not uefi mode.
    how to solve?
    My configuration
    MB: Asus p9x79
    Bios: 4106
    VGA: MSI GTX660 Twin Frozr III (602-V287)
    PSU: Enermax pro82+
    CPU: i7-3820
    MEM: Corsair 4x4gb 1600mhz
    SSD: OCZ Vertex 3 120gb
    OS: Windows 7 Ultimate 64bit
    My vga bios
    www32 . zippyshare . com / v / 88456544 / file . html

    Quote from: flobelix on 27-July-13, 01:20:52
    Is that a TV or monitor?
    I have 2 monitors dell u2311h and benq xl2411t (in the option of the monitors is on full).
    However the problem is on bios vga or bios mb because just change one setting (csm on or csm off) and it work or don't work in fullscreen.

  • R6950 Twin Frozr III Issue

    Ok, brand new build P8P67 Pro (Rev 3) initially boots up fine and I install windows. The next day I get no output to monitor with my MSI 6950 Twin Frozr III, also motherboard is beeping to indicate no VGA detected. Put it in second PCI-E slot and bingo, it works but it's at 8x.
    Presume mobo faulty, got an MSI Z68A GD65, I get the exact same problem, won't show anything in primary slot but will run fine in secondary at 8x.
    I really don't understand what the problem could be if not the graphics card in this case.
    Any advice would be appreciated.
    Rest of the spec:
    i5 2600k (stock speed)
    Corsair TX 650,
    Kingston HyperX Genesis Grey 8GB (2x4GB) DDR3 PC3-12800C9 1600MHz.

    reseat the card into the slot and ensure that's filled very well into the PCI-E slot
    also ensure that all power cables are connected to the VGA.

Maybe you are looking for

  • How do I... (1) "play" a ppt; (2) "see" my sub-folder​s and their files in "Docs To Go" or "File Manager"?

    This is written for the Playbook blog writer in the hope that he will see it here and post a blog answer. However, a reply from anyone would be appreciated. Thanks. [2 questions about PPBB OS 2.0+] Hi. Thanks for your very informative blog. I would a

  • Income tax depreciation in india

    Dear All, How do we adress the income tax depreciation in India. As we know the depreciation treatment for Income tax depreciation is a block concept...how do we adress that... Could any one explain elaborately if possible...short and precise inputs

  • How to remove gaps/null values from set of columns in a row

    Im trying to implement a solution for removing null value columns from a row. Basically in below example i have five codes and corresponding id's for that codes.What im trying to achive here is if i have a null code then i have to move next not null

  • Changing layout of ALV to excel and displaying the data there

    Dear All, My requirement is that I have to develop an ALV report, and also plot the graphs for the same. I need different types of graphs, so I have searched on SDN, and I found out a blg:- "Report with a Graph.. An Approach!" Here is what the person

  • Get All Nodes in a tree

    Can somebody tell me how to get all the node objects (DefaultMutableTreeNode) that are there in JTree? Suppose I have created a tree and added 4 nodes to the same, and if I want to get dynamically all the nodes that are there in the tree, what should