6600gt display properties not showing nvidia

This is my first nvidia card and I can't get the display properties to change so that the MSI clock and information shows on it. What am I doing wrong? I just got it today and can not figure out what I did wrong.

I had the same problem, here is how I resolved this issue. --------------------------------------------------------------------------------
A few weeks ago I had posted that the DOT tabs on my display properties had vanished and being the smart guy that I think I am the only way of resolving this issue was to uninstall SP2. After removing SP2 my DOT tabs were back, I chalked this up to another program that wouldn't function correctly with SP2, I also posted to another forum member who had a similar problem and offered my advice as to resolving this issue.
I would like to apologize to anyone who may have taken my advice and uninstalled SP2 to recover the vanishing DOT tabs. I can promise anyone who cares that before posting again I will do a better job of fixing my own before I try to fix yours.
If you haven't fallen asleep yet reading this I will tell you how I solved this problem. I reformatted my drive reinstalled XP Pro with SP2, updated all drivers, my system and my DOT tabs are functioning happily together.

Similar Messages

HT4044 Part of my iPad(1st gen) screen display does not show,hence I can only see it partially.It was not dropped and neither is it broken. Any help as I was told it cant be fixed and i hv 2 replace with a new unit i.e. pay in full as warranty is over? HE

Part of my iPad screen display does not show. It was not dropped and neither is the screen broken. I was advised to see the local service provider for a diagnosis.
I had finally managed to find time to find a local service provider last week (not easy) and was disappointed to be advised of Apple's policy of one for one exchange i.e. they wont repair and said that i would have to replace with a whole unit. As my unit is no longer under warranty, it meant that I had to pay for the full price of a new unit!
I might as well have paid for the latest new unit but since my unit is only 2 years old at most, it would be a great waste of money.
How can this be? Does this mean apple's product is inferior and do not last since warranty is only for one year?
I sincerely hope there is a favourable solution otherwse my money is flushed down the drain.
HELP!!!

I was using my iPad last night, shut the power off and when I turned it on this morning 2/3 of the screen is not working. It looks like the pandalela picture. What is the answer to fix this; is this a screen issue or and electronics issues. Has anybody else experienced this?

SharePont 2013 Document Library lookup Column Properties not Showing Correctly when editing in Word

Hi
I keep seeing this issue albeit intermittently. I have set up a doc library for my users which has a custom content type (lookup, metadata columns, etc) . They all appear perfectly most of the time except the lookup column. Sometimes is just
decides to display the title field of the current library and not the lookup list title . It is weird as it has been working perfectly for ages given the library is populated with valid documents.
There are some fixes listed here. Has anyone got any experience of this?
https://social.msdn.microsoft.com/Forums/azure/en-US/e0b55531-509c-4219-8113-61b3e488de69/document-library-metadata-properties-of-a-content-type-do-not-show-correctly-when-editing-in-word?forum=sharepointdevelopmentprevious
Freelance consultant

Hi,
According to your post, my understanding is that the lookup column not display well while editing in word.
Did you customize the Document Information Panel?
I recommend you edit your custom document information panel or create a new document information panel, then re-publish it to check whether it works.
https://support.office.com/en-gb/article/Create-or-edit-a-custom-Document-Information-Panel-for-a-content-type-b701a9af-3ea6-4c1a-9e1c-75363bd987c9?ui=en-US&rs=en-GB&ad=GB
Or you can also use the methods in the post you have pasted to check whether it works.
As the limitation of the environment, we could not reproduce the issue in our environment.
I would suggest you open a case to Microsoft Customer Service via Phone.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Is there a way to give permission to access iPhone 5C when you can't through the display? Display is not showing but iPhone 5C is recognized in iTunes through USB.

So display on phone does not show anymore; however, when I plug it into the USB the phone is recognized by iTunes and triggers the permission pop up to access. The only problem is I can't click "Trust" on the iPhone because I don't have a screen that shows it. I can even reset the phone by holding the power and home button. So basically it's give permission with no screen. I have a replacement phone on the way but unfortunately the back up for this phone was deleted during a PC refresh so no backup and that's why I need access to it. Any suggestions would be very helpful.

There is no way to interact with the phone if the screen is not working.
Did you happen to have iCloud backup enabled? If so, you'll be able to restore from an iCloud backup and get at least some of your data back.
~Lyssa

User defined properties not showing up in design center

Hello,
I did a search on User Defined Properties in this forum but couldn't find my answer.
We are using OWB 10gR2.
I already added a user defined property called UD_ALTERNATE_SCHEMA to the TABLE class definition.
I signed on as repository owner, I switched to single user mode, used OMBREDEFINE on class definition "TABLE", I commited my changes switched back to multi-user mode and signed off.
Here's the proof (it's in bold):
OMB+> OMBDESCRIBE CLASS_DEFINITION 'TABLE' GET PROPERTY_DEFINITIONS
BUFFER_POOL BUSINESS_NAME CACHE_MODE CONSTRAINTS DATA_SEGMENT_COMPRESSION DEPLOYABLE DESCRIPTION FREELISTGROUPS FREELISTS GENERATION_COMMENTS INDEXES INITIAL INITRANS LOGGING_MODE MAXEXTENTS MAXTRANS MINEXTENTS MONITORING_MODE NEXT OVERFLOW PARALLEL_ACCESS_MODE PARALLEL_DEGREE PARTITIONS PARTITION_TABLESPACE_LIST PCTFREE PCTINCREASE PCTUSED ROWDEPENDENCIES_MODE ROW_MOVEMENT SHADOW_TABLESPACE SHADOW_TABLE_NAME TABLESPACE UD_ALTERNATE_SCHEMA UOID
OMB+>
Here is how I defined this new property for the TABLE class.
OMB+> OMBDESCRIBE CLASS_DEFINITION 'TABLE' PROPERTY_DEFINITION 'UD_ALTERNATE_SCHEMA' GET PROPERTIES (TYPE,DEFAULT_VALUE)
STRING NO
My question is this.
Shouldn't this new property be available for edit when I right-click on a table object in the GUI interface and then choose "Properties" and then choose "User Defined" tab? Unfortunately it is not showing up on any of my tables in any of my projects.
Did I miss a step here? Or did I completely misundestand the concept of "User Defined Properties"?
Thanks

As so often happens, I found the answer almost immediately after posting this message.
In the user defined tab, I hadn't clicked/selected a table. Once I clicked on a table object, my brand new user defined property appeared.
Sorry to have waisted your time. I was really tired yesterday afternoon when trying all this.
Thanks

CSD 8.01(a) - Agent ACD State Log Display does not show loing time

Hello,
I have a customer that has was upgraded to CAD 8.0 and now the Agent ACD Sate Log Display does not alway show the login time for agents. We moved them to 8.01(a) for other issues but this one remains. Any ideas?
Jeff

Tahir -- These questions are best asked on the general application server forum. They can answer questions related to Oracle9iAS in general, like questions on Enterprise Manager. It is located at:
http://forums.oracle.com/forums/forum.jsp?id=466592
Thanks -- Jeff

Actual date hours PROBLEM - Displaying or not "Show time" in "User preferences"

Hello,
This is my current issue. I have a 5 days calendar with hours 7AM -> 8PM.
AM ->When I check "show time" in "user preferences", I show the good hours in ES and EF. When I apply AS and AF, AUTOMATICALY the good default hours are applied if i change the date (7AM -> 8PM)...
But, if i check, "do not show time" in "user preferences" and then i apply AS and/or AF changing date, PRIMAVERA apply automaticaly 00:00 in the hour ans "forget" the hours of the calendar...
It represent a big big problem for me, first of all in the gantt representation.
Any idea to fix this issue ?
Thanks

I think you need to do setting in grantt chart view setting..as Day,Week,Month in stead of user preference as " do not show time".

Display Item not showing Text when form is opened in Forms 6i

Hi,
I am using Oracle Forms 6i & I have taken DisplayItem control on a canvas and want to show some text over that e.g., "Your Name". For that I set 'Initial Value' property of that control in Property Palette to "Your Name". But I am not getting any such text message when I run the form nor it is coming at form design time. Can anyone please let me know where I am missing and how to display text in forms using DisplayItem control?
Can you also suggest from where to learn these basic things about Oracle Forms 6i?
Thanks in advance.

bootstrap escribió:
Can I initialize this object using Property Palette? If not why so?
can you please tell how to use go_block & where to call this method?
Yes, just as you did with the initial value property, but you have to "initialize" the record in that block. Navigating in runtime to the block is a way to achieve that, so you have to put the "focus" in the block with built-in GO_BLOCK . For example, in the W-N-F-I trigger.
Another way to put the focus there, as indrabudiantho sugested, is dragging the block to the topmost place in the list of block in design time. Thus, when you enter your form in runtime, the focus will go to the first navigable item in the first block as defined at design time.
About the resource docs, I think there was a "Oracle forms developer guide" bundled in paperback with a quite old version of the product which wasn't too bad. Not the "forms builder reference" , which is more or less the online forms help, but the guide. Also, there must be commercial books about forms & reports.

Menu display names not showing properly in CS applications.

In an effort to greatly reduce the burden on our catalog production staff, I am attempting to tweak an existing font whose bullet character is too large (so that they don't have to manually reduce the size of every bullet). I have successfully done this using Fontagrapher 4.7, however, I can't seem to get the name of the font to display properly in the font menu of Adobe products.
Specifically, this is a font with many different weights, and those weights are indicated by a number in front of the name (e.g., 47 Light Condensed). In Quark Xpress, the name properly displays with my new font family name (a variation on the original) and the correct weight/style name. However, the adobe products identify the font by the generic weight named assigned by Fontographer (e.g., LightCn). This is also the same naming that appears in Suitcase for BOTH fonts, the original and my modified version. I'd like the name to display the number and full weight/style name as that's what the production staff is used to.
I'm using Fontographer 4.7, outputting Type 1 fonts to an exclusively Mac environment. I'm not sure if this has to do with the way that Adobe products display the names. Any suggestions and information would help.

I just hit this problem as well, earlier this week when my MacBook keyboard stopped responding, so I expected it had something to do with a problem with the hardware or software on my laptop.
Now that I'm doing some diagnostics on the drive and the hardware, I am NOT finding any kind of specific problem that would be causing icons to stop showing in the Dock. As others have clarified, this problem is NOT that icons show up as "not allowed" with the circle-strikethrough icon, but that the application does not appear *at all* - the spot below the icon indicating that the application is running appears, but the application icon will not display. I have had this issue with both applications that are running and applications that have been quit, and either state change can cause the icons to disappear, but I can't find a way to reliably reproduce the issue. Icons just appear or disappear seemingly at random.
Once the surface scan is complete on the drive I've been using as my main boot drive, I'll try the "move-app-from-Apps-folder, then-back-again" trick to see if it gets the icons to appear again.

Yahoo Messenger: Display Icons not showing

I'm using Yahoo Messenger 3.0 beta 4 on OS 10.4.11. Only about half the display images in my contacts list are showing, no matter whether the contact is online or offline.
However on my iPhone, Yahoo Messenger shows the display image for almost every contact. This means that Yahoo on my Mac is not displaying contact images correctly.
I tired deleting and re-installing Yahoo and deleting plist files, this did not solve the problem.
Does anyone have any suggestions?

Which plist files did you delete?
Did you repair permissions & restart your computer after all the installations/re-installations?
Remember you are using a _*BETA = buggy*_ version of YIM. You may need to revert to a previous version or use Adium.
YIM is not Apple software. Suggest that you deal with YIM tech support and/or forums - Messenger for Mac Help and Messenger for Mac Community/Forums

HT5019 If my second display is not showing up on the graphics display window, yet the second display is showing a mirror image, how can I get it to recognize the second display and allow me to setup extended desktop?

I'm running 10.9.2 on a Power Mac from 2013. I am using two identical HP monitors. I have a Y adapter to connect the monitors. Which I'm guessing means the computer is only seeing one display since there is only one display output.

There are no PowerMacs from 2013. The desktop tower from 2006 on got named Mac Pro. The problem is probably the Y adapter. You need a videocard with two display ports, or two videocards to be able to make an extended desktop from one to the other. If you gave us the Y adapter make and model, we could tell if it supports screen spanning or not.

Chart Ledgend Display Label not showing correctly in CR Viewer 2008

Hello All
I have a chart where I have edited the displayed Legend Name for 3 chart elements using Edit Axis Label. The three new labels display correctly in CR Designer, when I run the report in CR Viewer I see 2 ledgend labels with the Edited Label and the thrid displays Original Label.
Has anyone encounted this before and knows what the solution is or is this a Bug in the software, which requires an OSS?
Thanks
Phillip

Hi Phillip,
I remember some Bugs related to chart labels fixed in Service Pack 3.
What service pack level you are?
If you have the same problems with Crystal Reports Viewer on SP3 level then we need more details about the issue to replicate and escalate it.
If you do not have SP3 yet, then please describe the steps, so we can test it in SP3.
Vitaly

Display:block not showing anchor link as a block in IE9

The display:block CSS code is making the anchor link inside a div, i.e.
<div><a>some text</a></div>
behave as a block in a site viewed in Chrome etc.
However, it is not behaving like a block in IE9. Instead of the whole width of div which should behave like a block and be clickable, only the actual text of anchor link <a> is clickable.
Please advise on how to ensure the whole div behaves like a block in IE9 also.

I checked and found that the probable problem is as described below.
I have indicated the style for a.link and a.visited in the starting of the css file as
a:link { color:#009900; text-decoration: underline;}
a:visited { color: #4E5869; text-decoration: underline;}
Later in the css file, I have defined styles for cbt, cbt a, cbt a:link and cbt a:visited separately. the styles for cbt etc is as below:
cbt { display:block; float:none;
position: relative;
margin:5px 2px;
padding-left:1px;
padding-right:1px;
padding-top:5px;
padding-bottom:5px;
z-index:4;
clear:both; }
cbt a, cbt a:link { font-size: 1em;
text-decoration:none; text-align:justify;
text-justify:inter-word;
font-weight:normal;
word-wrap:break-word;
color:#00C; display:block; }
cbt a:visited { color:#CC0033; }
The anchor link a is nested inside cbt tag in the html file as
<cbt><a href="abc.com">some text</a></cbt>
Inspite of the above codes, the anchor link a inside cbt tag is not taking the styles defined with cbt a, cbt a:link, but is instead taking styles defined in a:link initially.
Hence they are behaving as inline elements in IE9 when hosted on remote server by taking the initial style defined.
However,when the same page are viewed on localhost in IE9, the links behave as block elements (taking the later defined styles). The links also behave as block elements inside Chrome browser when viewed on localhost as well as on remote server. In this situation the links are taking the styles defined later in the css file.
Please advise on why the css behaviour is so erratic.

TV display will not show Macbook screen correctly

Hi,
I just bought a Mini DVI to VGA cord
and I just bought a new VGA Cable
I connected my macbook and tv
my tv shows a purple screen saver
and will only show items I have open
if I drag the opened item out of view of the computer screen to the right
only then will it appear on my tv
my tv is a iSymphony
1920 x 1080
how can I fix this so it will show my computer screen correctly on my tv
any input is appreciated

After reading your post, it sounds like everything's working correctly. You are using extended mode and your MacBook is the main screen (has the dock and title bar) and you can extend apps to the right over to the extended screen - your monitor. You can switch this so that the monitor is the main screen and the MacBook would be the extended screen. This is done in System Preferences/Display. Move the Blue Bar to the larger box.
Does this help?

2ndary display adapter not showing up

I am trying to get 2 monitors simulataneously, using the internal VGA bult into the motherboard as primary, using the 15 pin connector to an lcd screen, and an nvidia-vanta-tnt2 agp card as the secondary adapter to a 19" analog monitor. By modifying the init-adapter in the bios, I can get either one to work alone, but I cannot get winXP to recognize both adapters at once. There are no cards in the computer aside from the AGP card. Anyone have any suggestions??

You can't do it. The only way to do that is if you have a radeon 9100 IGP chipset and a radeon card. That's th e only way you can do that. Onboard video and video cards will not mix.

6600gt display properties not showing nvidia

Similar Messages

Maybe you are looking for