6600i Slide - tapping feature needs to be more sen...

I hope this can be fixed in a future firmware upgrade: the tapping feature requires too hard a tap to be activated. In fact I thought my phone was broken until I gave it a really firm tapping and finally the feature worked. The strength of the required tap is a lot firmer than one would expect, and if you did it in public people would think you were having a bad day and taking it out on your poor phone!

Because you started a topic a few minutes before starting this one, perhaps next time only create on topic It clogs up the forums.
As to your question, the handset was designed like this and most likely will not change in firmware updates.

Similar Messages

After Effects CS6 error: RAM Preview needs 2 or more frames to playback - any ideas please?

Hi everyone,
I'm running After Effects CS6 (11.0.4.2) on a MacBook Pro 2.8Ghz with 16GB RAM (Mac OS 10.9.4)
As a test, I created a 3 and a half minute Sequence in Adobe Premiere CS6, and then imported this into After Effects CS6, and placed it on the AE timeline.
This footage involves a couple of 1920x1080p footage movies, some psds and a large number of JPGs exported from two videos arranged as a sequence in two layers in Premiere, one on top of the other. So all in all for a Premiere / After Effects file I'd say it's reasonably heavy.
I then did a RAM Preview with Multiprocessing switched off - the 3 and a half minute sequence loaded into RAM, taking about 1min 30seconds, and played back in realtime at 25fps. This worked fine with 3,4,5 and 6 GB RAM available to other applications in the Memory Preferences. All things considered I think this is quite good. I can make changes, reclick the RAM Preview icon and my changes load into RAM and it previews ok.
My only 'complaint' is how long the RAM Preview takes to load up the whole thing.
I've been reading up on Multiprocessing and decided to try this to see if I can speed up the time it takes my RAM Preview to load up.
So I looked at some recommendations from Adobe and read information on various forums including this one.
My settings in the Memory Preferences are currently
• 6GB reserved for other applications
• Reduce cache size when system is low on memory - unticked
• After Effects Multiprocessing - ticked
• Installed CPUs (processor cores) - 8
• CPUs reserved for other applications - 6
• RAM allocation per background CPU - 3GB
• Actual CPUs that will be used - 2
This combination takes about 25 seconds to load up my 3 and a half minute sequence which I thought was pretty amazing.
I then pressed the stop button and then the play button - so now just playing the sequence briefly.
And also added a new layer - into the timeline - just a simple shape.
Then I tried a RAM Preview again.
I found I could load up part of the sequence but not load the whole thing into RAM.
I kept trying to get a RAM Preview and got this message
"After Effects error: RAM Preview needs 2 or more frames to playback" which seems to prevent RAM Preview from working.
Eventually I quit and restarted After Effects and the problem went away temporarily and then came back when I tried again.
I tried various changes to the Memory Preferences - trying 3GB available for other applications. This gave 13GB of my 16GB RAM to After Effects.
This made it take slightly longer for the After Effects error to appear but it still appeared.
I tried ticking Reduce Cache size in the Memory Prefs - the After Effects error still appeared, so having read this is supposed to make the issue better I now leave it untucked, but as far as I can see ticked or untucked, it makes no difference, the problem remains.
I've since tried -
Making 2,3,4,5 and 6 CPUs available for other applications.
Changing the Background RAM allocation per background CPU to 0.75GB, 1GB, 1.5GB, 2GB and 3GB
Lots of combinations.
But in the end, I always get the "After Effects error: RAM Preview needs 2 or more frames to playback" error.
It might take less or more time for the message to show up, depending on the combination of settings, but in the end I always got the same message appearing.
And I notice that I can RAM Preview less and less of the timeline. i.e. it becomes more blue than it does green and will load in only a small section of the timeline as opposed to the whole thing.
Reading further, I tried Edit > Purge > Image Cache and Edit > Purge > All Memory but still get the error message.
I also tried ensuring there were no other applications running e.g. Safari or Chrome or Firefox. And certainly not Photoshop or Premiere etc.
Reading even further, I tried two Memory management applications - 'Memory Clean' and 'Purge.'
Neither has had any effect - the After Effects error still appears.
Then I went back into the Memory and Multiprocessing Preferences.
I unticked Render Multiple Frames Simultaneously. And now the RAM Preview loads the whole 3 and half minute sequence in entirety, taking about 1 and half minutes to do so. It's working as perfectly as if I'd just quit and re-opened the application.
Then I went back into the Memory and Multiprocessing Preferences.
I reticked Render Multiple Frames Simultaneously.
The chose Edit > Purge > All
And tried a RAM Preview again. It loaded up in 25 seconds, but then, as previously, the error message came.
I tried Edit > Purge All - no effect.
And I tried going into the Media and Disk Cache Preferences and clicked Empty Disk Cache - still the problem remains.
I understand from my reading that After Effects CS6 11.0.2 was intended to fix this issue but I'm on 11.0.4 and as far as I can tell, I still have it - assuming it's the same thing.
As far as I can see, not using Multiprocessing allows me to work without these errors but take a bit longer to load the RAM Preview.
However I'd like to be able to use Multiprocessing as it seems it can potentially speeds things up quite a lot. I realise I could just not use it and AE would work, but I'd rather be able to make use of a feature of the software if possible, especially if it will speed things up and make optimum use of the my computer's hardware.
I've downloaded a trial copy of After Effects CC 2014. I'm still testing it but as far as I can see the RAM Preview error appears in this version of AE as well, but can take bit longer to show up in my experience.
Thanks everyone - if anyone has any thoughts or advice I'd appreciate hearing your opinions.
Kind regards,
John

You need to have much more RAM reserved for other applications and more CPUs reserved for other applications. Your current settings are crippling your performance.
Read these:
https://blogs.adobe.com/aftereffects/2009/12/performance-tip-dont-starve-yo.html
http://blogs.adobe.com/aftereffects/2010/03/performance-tip-dont-oversched.html
After you have adjusted your settings according to the recommendations on those pages, restart your computer and try again.

You need to create more buy in for this to work

As opposed as I am to lifetime subscriptions (creative cloud, MS Office, virus scanners, etc.), I can see some value in them as long as they bring value to me. I have no doubt in my mind that I can continue to work unhindered permanately with Adobe CS6 products without giving you another red cent - ever. Just as I can continue to use MS Office 2010 withouit paying MS anything else for a word processor, spreadsheet program and email/calendar client. You need to give me a REAL reason to not do this. I can personally only justify $50/month for CC with the following features:
1. Real cross-platform support. That means linux. There is no point in me spending money forever on a product (a product for which I can already do everything now with no additional cost). My business will gain nothing from CC short-term or long-term unless I can gain value from this purchase and save money from something else, and that basically means running on linux. Putting an extremely stable five-year updateable workstation OS like Ubuntu 12.04 on current hardware without having to shell out big $$$ to Apple for their non-upgradeable and non-serviceable hardware would flat-out save me money, money I would be willing to give to Adobe instead of Apple. I do have some workstations running Windows, but the Ubuntu and Mac workstations are more productive IMO working in creative suite, with less OS issues. I can see no reason not to code/port to linux other than developer laziness. People are disgusted with Microsoft since Windows 8 and Mac's just cost too much money in this economy. There are only a few reasons everyone is not already running linux - games in Windows (which Valve is starting to address with the steambox and steam for linux), Adobe products and MS Office. Office 2010 runs great under wine, so screw Microsoft. If you developed CC for linux, big-name vendors would instantly start selling home and business workstations pre-installed with Ubuntu designed for digital editing. It's not that linux users are completely opposed to spending money on software and demanding open-source, they just don't have much of a choice of anything to spend it on. Give them a quality product at a reasonable price, they will pay.
2. Better mobile support. We need real tools for quick edits on popular formats on our mobile devices. As our devices are getting faster, we need more integration for when we are not sitting in front of our workstation. For $50/month, this should be included and featured.
3. Better cloud-based training. To draw people in and keep them paying, they are going to need more frequent content updates, that also means proper feature training. The training should be easy to understand and readily available upon new features.
4. More cloud storage, much more.

ebnovotny,
Have you also used Address Book>Card>Make This My Card?
If you have, you could also quit iCal, find the com.apple.ical.plist file in your Macintosh HD/Users/yourusername/Library/Preferences folder and drag it to the Desktop. Then log out/in or restart and check if your card is recognized.

I need to display more than 5000 rows by JClient JUtableBinding

I need to display more than 5000 rows by JClient JUtableBinding. is it possible not to get PassivationError and display it?

FYI,
In a future release, BC4J will also allow VOs that use oracle-database ROWNUM features to fetch only a range full of rows rather than the entire set of rows. For queries that return thousands of rows and you want to display them in a table or pages, this option on the VO should come in handy.

I an getting an error with photo merge in PS cc . It gives me a code tmp00000001 using from photoshop and if I try from bridge it tell me that I need to select more than one image. It is not recognizing the photos I am selecting in bridge. please help. my

A new problem with CS5 forced me to download PScc but the problem is still there. I am getting tmp00000001 in photo merge when importing multiple files from inside PS and if trying from bridge I am getting a pop up box telling me I need to select more than 1 file. Photoshop potomerge is not recognizing my selections from bridge..!! please help.. my knowledge of computers is a 3 on a scale of 1-10

if i run this particular code
( SELECT
AccountDetails.CUSTOMERNUMBER, AccountDetails.ACCOUNTNUMBER, CUSTOMERDETAILS.CDTITLE, CUSTOMERDETAILS.CDFIRSTNAME, CUSTOMERDETAILS.CDLASTNAME, AccountDetails.ACCOUNTTYPE,
AccountDetails.ORIGINALCONTRACTENDDATE, AccountDetails.CONTRACTTERM, AccountDetails.CONTRACTENDDATE, AccountDetails.BRANCHAREA, AccountDetails.PRODUCTTYPE,
AccountDetails.HOUSEBANKACCOUNT, AccountDetails.CARMODEL, AccountDetails.CARLICENCE, AccountDetails.ARREARSBALANCE, AccountDetails.CODEBTOR, AccountDetails.GUARANTORNUMBER
FROM AccountDetails
JOIN CUSTOMERDETAILS ON AccountDetails.CUSTOMERNUMBER = CUSTOMERDETAILS.CUSTOMERS1
WHERE EXISTS
( SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
AND DebtEpisodes.DCASentDate IS NULL
AND Dcaaccountallocation.ACCOUNTID = AccountDetails.ACCOUNTNUMBER
AND DebtEpisodes.DCAORLAWYER = 'DCA'
This returns 1 row of data
However if i run a small part of the above code...
SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
It returns a lot of rows with a status of 2
Now i presume what I am going to do is to ensure that all the fields provide satisfactory requirements, with regards to the above code. Although I have many records in all the stated tables already.
:(

I need to connect my iPad to a projector and USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

I need to connect my iPad to a projector and have USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108
If your location does’t have wifi to use with the Apple TV, use a portable router.
Portable routers http://compnetworking.about.com/od/routers/tp/travel_routers.htm
 Cheers, Tom

HT201317 I have over 300 photos and 87 videos on my iphone 5. each time I plug in for battery I get a message saying not enough space, need to buy more, so I did yesterday. While attempting to do icloud storage again it said would take 83 hours.

I have over 300 photos and 87 videos. When I recharge the battery I am geting the message to buy more storage to because not enough icloud space. So I did yesterday. That went ok, but the new message tells me it will take 83 hours. Perplexed I went thru the settings and turned off apps and their data that I didn't realize where on. Now I'm not sure if I needed to purchase more storage but it is still taking forever to complete the task. Am I on the right track with this, meaning will take forever to store all my photos or what ? The only other item I have on to store is contacts. Can you assist me ? Thanks - emoslim

Welcome to the Apple Community.
The first back up to iCloud may take some considerable time. Just how long isn't really possible to say without knowing how much is in your back up and your connection speed.
What many people don't realise is that upload speeds are often significantly less than download speeds, so for example a user may have a download speed of 40 Mbps, but only 1 Mbps for uploading. As a rough guide it will take around 2 ¼ hours to upload 1 GB of data at 1 Mbps.

HT201318 I registered my apple ID and Icloud with a US address, and live in Switzerland. I do not own a US credit card. Now that I need to buy more storage with my swiss credit card, I can't change the country's billing address from the US to my swiss one

I registered my apple ID and Icloud with a US address, and live in Switzerland. I do not own a US credit card. Now that I need to buy more storage with my swiss credit card, I can't change the country's billing address from the US to my swiss one. HELP PLS?

Did you actually watch the movie? You get 30 days in which to view it and if you didn't watch it, that could be why you are getting that message. If you have watched the movie and you're sure that is has expired by now, contact iTunes Store Support and seek their help.
Change the country in the upper left. - and click on Purchases, billing and redemption to proceed.
https://getsupport.apple.com/Issues.action

Thoroughly angry and frustrated. I've run out of room and need to make more to add more songs. Once and for all, how do I, if I even CAN, delete music from my iPod Nano WITHOUT losing them from iTunes?

Thoroughly angry and frustrated. I've run out of room and need to make more to add more songs. Once and for all, how do I, if I even CAN, delete music from my iPod Nano WITHOUT losing them from iTunes?

You should take the time to familiarize yourself with the documentation that is available. You can "uncheck" a song in iTunes, and then do a manual update.

HT1766 We have a refurbished ipod touch 4th gen. The cloud storage is almost full and it won't allow me to back up. Do I need to purchase more storage space or how can I delete apps/pics to make more space? Also, somehow I erased all of the music from th

I have a refurbished ipod touch 4th Gen. I am having problems backing up because the cloud is almost full. I have tried to delete some apps/pics but it won't let me. Do I need to purchase more storage? Also, I accidentally erased all stored music. It is still on my personal computer and I need to know how to get it back on my ipod. A family member set it up for me.

You said " I accidentally erased all stored music.".
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Your iCloud backup does not include non-iTunes purchases like music from CDs
If on your iPod now:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
You can go to Setting>iCloud>Manage Storage and see what is using the store and delete items from iCloud

Will I need to put more memory on my MacBook Pro for Mavericks?

I got my MacBook Pro in Februrary 2013 (so I think it's a mid 2012 model? Not sure). The memory for it is 4gb and 1600mhz. It came with OS 10.8, but I am now upgrading to Mavericks. My question... will I need to get more memory to fit Mavericks onto my computer? Or will what I have suffice? I don't have much stuff on my computer; I backed everything up before beginning the process (should be done in a few hours, and I can always pause it if necessary). The backup flashdrive holds 8gb and I'd say, in total, I have about 4.5gb worth of stuff (word documents, pictures, and videos) on my computer. How will that affect what Mavericks takes up (Mavericks says it needs 5.32gb of space)?

venom --
With all due respect, I find it hard to believe you ever worked at Apple.
You can't spell. And you believe that Mavericks only needs 1 GB to install. Totally incorrect.
I can easily upgrade my computer with more memory, too, after all is said and done.
Do that, you'll love it.
Babowa & KOT: Right on.

Made preference changes, but still getting the Ram preview needs 2 or more frames to play back.

I'm new to After Effects CS6 and am working on a very simple Kinetic Typography project. I don't have a lot of memory, but this is a really simple project, so I'm wondering if maybe I'm just not using the work area correctly. Every once in while I can get the project to RAM preview, but only for a few seconds. Most of the time I get the "Ram preview needs 2 or more frames to play back" error message. I have pasted my sytem info and setting info bleow. Thanks for any insight!
I have checked the Render Multiple Fames Simultaneously box and have set the seetings at:
Here is the info when you click on details:
Installed RAM: 4.00 GB
Current RAM Usage: 0.00 GB
Allowed RAM Usage: 2.50 GB
Process ID
Application Name
Min Needed Memory
Max Usable Memory
Max Allowed Memory
Current Memory
Current Priority
3081
After Effects
0.00
0.00
2.50
0.00
3 - Low
System info:
System Version: Mac OS X 10.6.8 (10K549)
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2.2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GB

What exact version of After Effects?
Show a screenshot of your TImeline panel and Preview panel when the problem occurs.
Make sure that we can see the details in your screenshot. Your current screenshot is unreadable because it's so small.

AE CC 2014.1.1 the plague of "ram preview needs 2 or more frames"

As i said abot Premiere CC 2014.1, for me AE CC 2014.1.1 is the worst version of this sw ever on my system. Specs:
i7980x
GTX680 4GB
24GB ram
Asus P6T deluxe mobo
2 SSD Intel, one for AE cache
I'm experiencing continuos crash from AE. I'm on a big project, as always, and performance is terrible. After a bit of time of working AE became terribly slow. The "blu" bar under the preview window start load again and again. I move the mouse, loading, i scroll the window, loading, press caps lock to stop the preview....loading. This is the sympthon. After this kind of wierd performance i know that my ram preview will not start again. The infamous message will pop up and doesn't matters what i do, purge, format ram or whatever. the only way is to close AE and reopen it.
Now...i'm using AI files or PSD files, so i've to run AE and Photoshop or AI all toghether....after some minutes...the bar loading, the performance slows down and the message pop up again.
The ridicoulous fact is that when i render the project i have the ram usage at 19% and cpu usage at max 60%. So my renders are really long (about 10hr for 2 minutes of animations), but my system is sitting there doing nothing. Really odd...i can use 12GB of ram and half of the cores at this point, doesn't matter for AE performance...

Right! It's got a little bit worse... After the 'RAM preview needs 2 or more frames' window I purged then restarted and all was back on track for about 5 minutes, then it happened again and then the following series of warnings have locked AE in a cycle of warnings...
Below is the series of warnings I've just received followed by my memory and cache settings and then the memory left on my computer.
then
my memory settings
my cache settings
and the memory left on my computer
The file is 'just' a series of After Effects solids with masks (about 40), rigged together with Duik IK (not the puppet tool thing just the one that links layers together) and some wavs for the sound file.
Like I say I've probably done hours of lipsyncing over the last 15 years with far far heavier files (using HD footage and a far bigger comp with psd files) and I certainly haven't had this kind of persistent problem and it's only since I installed CC2014 last week...
grrrr and arrrrgh

I have ordered OS X 10.6. I have 1 GB of memory. Will I need to buy more memory?

I have ordered OSx 10.6. I have 1 GB of memory. Will I need to buy more memory?

If you like to work with photos, graphics, or videos at all, then 2 GB would be much better; I actually had 3 GB installed when I was running Snow Leopard (that was the maximum for my iMac). The minimum requirements published are exactly that: a minimum. For instance, for Mountain Lion, it says 2 GB; unless you do nothing but email and web browsing, 4 GB is a much more realistic minimum.
So, if your computer model can handle 2 GB, go for it.

IDVD Slide Show Feature - Audio Issues

Looked around in this forum and did not see this specific issue.
I open iDVD, pick a theme, add a slide show, select the pictures out of the media window, and drag them in. Select a play list out of iTunes, and drag it in. Play the show in iDVD, all is wonderful. Burn the disk, put it in the DVD player attached to the TV, and the slideshow plays, but the music hick-ups at every slide transition.
Any ideas?
This also happened to me every time I tried to make a slideshow in the previous version of iDVD. I ended up creating the show in iPhoto or iMovie and importing that, but I guess I'd expect that if Apple put a slide show feature in iDVD, that it would actually work...

+but the music hick-ups at every slide transition.+
Toshiba DVD player? I've experienced that with those players...
Does it play OK in your Mac?

6600i Slide - tapping feature needs to be more sen...

Similar Messages

Maybe you are looking for