6612 support under QNX with NI-MHDDK

Hellon
We have already developped QNX drivers for PCIe-6341 but currently we would like to support PCIe-6612 8 counters board. It seems that this board use the STC-3 as other Serie X . But the current version of the NI-MHDDK for QNX does not specificaly support this PCIe-6612 board.
What should I do be able in a first step that the QNX MHDDK identifies my board ?
Regards,

Please get the MH DDK examples and documentation from the following location.
MHDDK
Christian L
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

Similar Messages

HT204053 The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert ano

sir have this error so what can i do The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.

It looks like the iPhone is locked to a carrier that is not the one you are trying to use.
You need to determine which carrier it is locked to and then contact them to see if they are willing to authorise the unlocking of your iPhone. As ManSinha mentioned, many carriers will only authorised the unlock if requested by the customer who had the contract with them for this iPhone.
Remember that only the carrier who owns the lock on your Iphone can authorise Apple to unlock the iPhone in their servers. You need to contact the carrier or have the previous owner of the iPhone request the unlocking.

HT1937 the SIM card that you currently have installed in this iPhone is form a carrier that is not supported under the activation policy that is currently assigned by the activation server.this is not a hardware issue with the iphon. please insert another

the SIM card that you currently have installed in this iPhone is form a carrier that is not supported under the activation policy that is currently assigned by the activation server.this is not a hardware issue with the iphon. please insert another SIM card from supported carrier or request that this iPhone be unlocked by your carrier.

Similar issue
here is the description
I have similar message but for me the Verizon guys said they unlocked it and when I actually connected to iTunes using Verizon sim card and then did the restore as new iphone then everything worked well and at the end i saw the message "Congrats, your iphone is now unlocked" and then I did the set up as new iphone for my kid.
Once new apple ID was set up, then I removed the verizon SIM and then inserted prepaid t-mobile sim card and after the phone booted up then I got the same message like above...."not supported"
What do i do now? I think the phone is unlocked right?
Also do I need to insert Verizon SIM card and do restore as NEW and this time do not set up the iphone but change the SIM card and then set up or ?
I am confused and other threads were talking that if you get congrats message then u shd be good to use other SIM cards....please help!!!

Problems with NI-488 cPCI adapter under QNX.

Hi Michael,
The problems that I am having with the NI 488 cPCI adapter are random, so
it is
very difficult to nail down where the problem lies. Sometimes the adapter
fails
the initialization sequence in the nitn_presence_check routine at various
points in the 4 tests that the driver performs. Other times, if the adapter
initialization passes, the driver will loop in the nitn_wrtPIO with the
message
"waiting, isr3=0x4c" or "waiting, isr3=0x00". I have added a loop count to
the
routine so that it exits after 100 loops, but it still affects the driver
performance. I have had a similar problem with the nitn_wrt1byte routine.
I have been told that the driver works under Windows and Linux, but it
doesn't
work under QNX, and I have no idea why not, as I don't have any chip-level
documentation on the adapter. I will appreciate any help that you can give.
Thanks, Hugh.

Hi bearhug,
This post was a little confusing. Was it started in another thread and moved over to a new one accidentally? Since it appears that you have had some previous correspondence, I looked into the type of issue you are experiencing and it looks like Michael, one of our Applications Engineers, has an in-work service request related to it. If that is your service request, I would encourage you to contact him directly by calling 1-866-275-6964 and entering the service request number there. Please let me know if there has been some miscommunication.
Best regards,
Matt J
Matt J.

I wanted to know how to unlock my iphone, since I had to restore it and when it restarted, it appeared this message: "The SIM card que you currently have installed in this iphone is from a carrier that is not supported under the Currently actuvation polic

I wanted to know how to unlock my iphone, since I had to restore it and when it restarted, it appeared this message: "The SIM card que you currently have installed in this iphone is from a carrier that is not supported under the Currently actuvation policy that is assigned by the server activion. this is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request que this iphone be unlocked by your carrier. Please contact Apple for more information. "
I need help, I use my phone for everything enclusive to work. I appreciate if you can help. I'm from Brazil. My name and giullia.

Did you purchase this device from Apple or an authorized reseller? It sounds as if you had a device that was jailbroken/hacked to operate on your carrier. Upon updating the iOS, it is now locked back to the original carrier the device was locked to.
Only the carrier the device is locked to can authorize an unlock. You will need to make contact with that carrier and see if they provide unlocking services, and if they do, if you qualify for an unlock. Otherwise, you are out of luck. One that carrier can take care of the unlocking.

How to fix The SIM card inserted in this iPhone does not appear to be supported. The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation

The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.

Or if you've recently got the phone unlocked then you'll need to connect it to itunes and then do a fresh restore to unlock it ,although for most users simply connecting to itunes for few seconds did the trick.

Does BOXI support crystal reports with parameter references in formulas?

I am designing a report in Crystal Reports XI Developer that contains parameters, which are passed to a stored procedure and are also used within formulas ( in Crystal Syntax ie. {?FORMAT_ID} ) in the report itself.
I can run the report successfully in CRXI Developer. The formulas use the correct values from the parameters entered during execution and everything looks good.
I then deploy the report to Business Objects Enterprise XI. I do all of the things necessary to manage the report including setting up the proper database connection information and default parameter values.
When I run the report using the Crystal Report Viewer, I get the following error message:
Error in File Forecasting.rpt:
Error in formula <Report Format>.
'if (not isNull({?FORMAT_ID} ) ) then
This field name is not known.
Details: errorKind
This happens when I press the "Preview" button in the Manage Object dialog from Crystal or when I run the report using InfoView.
I have changed the formulas and it doesn't seem to matter what the specific content of the formula is; other than the existence of a parameter reference in the formula. If I comment out the parameter and replace it with a hard-coded value, it gets through the formula fine.
Does Business Objects Enterprise XI support crystal reports with parameter references in the formulas?
Thanks,
Tim H.

Hi,
In Crystal Reports under File -> Report Options >check convert Null Values to default > Verify on first refresh > Verify stored procedures on first refresh.
This corrected the issue by allowing the query engine time to locate those columns and map them to the query being sent by the report.
The convert null values was added because those field were being used in the record selection and grouping.
Regards,
Vinay

TS2529 The SIM card inserted in this iPhone does not appear to be supported. The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation ser

The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information
what can in do?

Well unfortunatly that advice does not always work. I bought a unlocked iphone4 from apple several years ago and went to att on a no contract basis. Six months later the phone crashed while updating the operating system. Apple replaced the phone with a new one. All is fine till I got a iphone5 and gave te phone to my cousin. The phone is now locked to att but att says the IMEI number is not a valid ATT IMEI and therfore cant unlock it. Apple says there is nothing They can or are willing to do so now I am stuck for a 600.00 phone that can't be used.
If anyoun knows a way naround this situation mI would appreciate a heads up.

HT6154 HI , I am still under cotract with my iphone 5 and i can't hear anything even though i have my phone set to high volume

i am using iphone 5 and still under contract with ATT services. the phone has suddenly some technical issue. when i call some one or some one calls me, if i i turn on th emusic anything that hass to do with listening to the device, it doesnot work
i hear very very low voice eventhough it is set to high volume. will ATT will provide me free support for the phone?

Only ATT can answer that.

How do I get firewire support under XP running on OSX 10.8.2?

I have an old Nikon film scanner that is bundled with Nikon scanning software that requires Windows XP. The film scanner has only a firewire cable. My iMac is running OSX 10.8.2. I installed Oracle's (free) VirtualBox and was able to get XP running on my mac. However, I soon discovered that VirtualBox has no firewire support. That sent me searching for other methods of running XP under OSX. I thought Apple's Parallels 8 software would do the trick but I don't believe it supports firewire either.
Can anyone give me an idea of what software would allow me to run XP with firewire support under OSX 10.8.2?
Another question: Do those firewire-to-USB adapter plugs work and are they safe to use?
For those who have familiarity with film scanners, VueScan is not a desirable option for me because it does not fully support Digital Ice, while Nikon's software does.
Thanks..

OS X Lion: Use another Mac as a display
It also works with Mountain Lion.

Does WLS support Debugging Servlets with JBuilder 3 ?

I have read all the news groups and it appears that WLS 4.5.1 does not
support debugging Servlets with Jbuilder 3.0.
I am using the trial version, does this matter ?
Or should I just buy another web server ?
Joe

I think below documents will be helpful to you.
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13952/taskhelp/webservices/webservicesecurity/CreateDefaultWSSConfig.html
This document tell you that you can attach a weblogic webservice configuration using weblogic admin console.
After creating this configuration you need to updated this configuration as per the steps given under :
Use X.509 certificates to establish identity
Thanks,
sandeep

Does NFS support Oracle RAC with TAF ?

Hi,
Does NFS support Oracle RAC with TAF feature. ?
If yes, please point to some valid document to prove the same.
Regards
Sumit

TAF has nothing to do with the underlying storage architecture and is therefore 'supported' with your choice of asm, raw devices, cluster file system and NFS. NFS is supported on some platforms. For more details, check the certify tab in metalink. Some information can also be found here
TAF will be available on any rac installation, but not all drivers support it (jdbc-thin for example)
Bjoern

WARNING: DSP 3 NOT supported under Quad-Core G5 Systems!

This is from my posting at the DSP forum and a warning to all...
Alright, are you ready for this one? I just contacted Apple Support about running DSP 3 on my newly purchased Quad-core G5.
Those of us with a Quad-core G5 system are SCREWED when it comes to using DSP 3. The Apple guy told me that DSP 3 is not supported under the Quad systems (because "the Quad systems didn't exist at the time that DSP 3 was around" but wait, didn't DSP 4 come out BEFORE the Quad-core systems, too?). You have to use DSP 4 if you have a Quad-core G5.
I explained my outrage to the guy (very unsympathetic) that Apple does not post this information on their website and does not inform their Apple Store employees about the issue (I had mentioned to several employees of my intentions to run DSP 3 on the system when I was buying it).
The guy said that no one's complaining about this issue because "everyone gets the latest and greatest software to run on the newest machines" and "that's just the nature of technology" Yeah, right. I hate to say it, but I have Windows 98 apps from a single proc that run fine on Windows XP on a dual proc system.
Anyway, spread the word and give Apple some more money by upgrading to DSP 4, so that they can keep nickel and diming us. The guy mentioned that if anyone wants to complain, that they can complain to the Final Cut Pro discussions site since apparently, that's the place where Apple actually reads posts.

Heya,
Unsupported it may be, but does it run ok? I could
see it having worse performance than on a single-proc
machine, but it shouldn;t have any actual problems.
The guy said that no one's complaining about this
issue because "everyone gets the latest and greatest
software to run on the newest machines" and "that's
Well, given that you have bought their first machine
which supports > 2 concurrent threads [e.g. one system
thread and one app thread], I'd say he's partly right.
Anyone forking out the money for a quad will be [partly]
wasting it if they do not run applications that are
written to be fully multithreaded, i.e. written with
the quad in mind.
This is probably especially true on the Apple platform
as the programmers will assume that the user is on
one of the handful of machines available at the time.
Being inherently lazy, no programmer is going to add the
complexity of supporting n threads if only single-proc
machines are being sold [yeah,ok, there were dual-procs,
but that really means a two-thread system, which is
normally the case anyways ... one for GUI and one for
processing].
to say it, but I have Windows 98 apps from a single
proc that run fine on Windows XP on a dual proc
system.
Given the nature of Windows 98[/95/ME] and the
applications written for it, I am very frightened
for your system integrity
--Mike

My IPhone 4S is hanged during updating IOS 6 to IOS 8, PHONE was connected WIFI and under charging with computor. Kindly help, it is not switching off, not restarting

My IPhone 4S is hanged during updating IOS 6 to IOS 8, PHONE was connected WIFI and under charging with computor. Kindly help, it is not switching off, not restarting

Hi HARISH INDIA,
That is not good but lets see if we can get it back to life. If you can, see if you can put your iPhone into recovery mode and then use iTunes to restore it. If you can get it to restore, it will erase everything off your iPhone. If you have a back up in iTunes or iCloud then you can put that on after the restore is complete. Take a look at the article below for more information.
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/en-us/HT201263
Take it easy,
-Norm G.

How do I clear space on Macbook air in the following folders? Mail, Containers and Application support under libraries?

How do I clear space on Macbook air in the following folders? Mail, Containers and Application support under libraries?

Why? If you need space on the SSD:
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Get an external hard drive on which to store some of your files after which you can
erase the data from your internal drive to free up space.
5. Also see Freeing space on your Mac OS X startup disk.
6. See Where did my Disk Space go?.
7. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

6612 support under QNX with NI-MHDDK

Similar Messages

Maybe you are looking for