6630 - Restore error with PC suite

I have made a backup of my 6630 phone and memory card using PC Suite.
When I try a restore to my 6630 a get a message saying that my memory card does not have enough space. But the card has more than 700M free.
Please help.

What is the size of your backup that you took from 6230i and what version of PC Suite did you use to backup ?
If you still have both phones, take a backup from 6230i with PC Suite 6.81.13 so thatyou backup phone memory only and restore that to empty 6233.
Then move memory card to new phone.
Edit:
just checked that:
your 6233 has:
Up to 6 MB free user memory + 64 MB MicroSD card
while your 6230i has:
Up to 32 MB internal memory , up to 512 MB MMC supported
So you may very well have a backup from 6230i that is such size that it does not fit to 6233.Message Edited by manta on 27-Sep-2006
07:18 AM

Similar Messages

HT1339 Restoring errors with iPod Classic

My iPod starting having problems after purchasing music from itunes. It was having problems downloading. Then it would freeze and turn off. Now when I try to restore the iPod, I get a message that states there are restoring errors. Any ideas?

I doubt that there is any connection to purchasing music from the iTunes Store, because those are just regular AAC 256 kbps audio files.
What you describe could be caused by the hard drive in the iPod becoming unreliable. It may also be a problem with the connection between the iPod and computer.
Try shutting down the computer and disconnecting all USB devices, including any hubs. Start up with only standard keyboard and mouse connected (if normally used).
Run iTunes and connect iPod to a direct USB port. If necessary, do a Reset on the iPod (while connected)
http://support.apple.com/kb/HT1320
Try doing a Restore again.

3100b phone has communications error with PC suite

Hello:
I have been using PC successfully on my phone, synchronizing with MS Outlook for quite some time. I recently experienced a communcation error during the synchronization of my calender that I cannot resolve. I restored my phone settings, upgaded PC suite and rerun the PC suite settings wizard several times. I have tried updating both directions, as well as updating only outlook data to the phone, but I just can't get passed the "Communications Error" on item 2 of 50.
I am running the following software:
XP (Version 5.1, Build 2600.xpsp_sp2_gdr.050301-1519, service pack2)
PC Suite 6.81.13.0
Outlook version 11.0, Build 8010
Connectivity Cable Driver 6.81.1.2
Does anyone know why this problem has suddenly appeared and how I might go about resolving it?
Thanks much for your insight.
g.

I have this problem too. PC Suite clearly recognises the E51 and the other programs in the suite seem to work OK. But when I select Sync nothing happens. I have switched off Nokia email messaging just in case that was causing the problem but it makes no difference.
Has anyone found out what the solution is yet?

PLEASE HELP! Installation errors with creative suite 5.5 design premium?

I recently tried to install creative suite 5.5 design premium on to my home computer with windows vista home premium and it was all going fine then right at the end of the installation this message popped up please help??
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 14 error(s), 4 warning(s)
WARNING: DW024: The payload: Adobe Photoshop CS5.1 Core {08EF22BC-43B2-4B4E-BA12-52B18F418F38} requires a UI parent with following specification:
                Family: Photoshop
                ProductName: Adobe Photoshop CS5.1 Core_x64
                This parent relationship is not satisfied, because this payload is not present in this session.
ERROR: DW025: The payload with AdobeCode: {857CC5F0-040E-1016-A173-D55ADD80C260} has required dependency on:
                Family: InDesign
                ProductName: Adobe InDesign CS5.5 Icon Handler x64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {857CC5F0-040E-1016-A173-D55ADD80C260} has recommended dependency on:
                Family: Adobe Web Suite CS5.5
                ProductName: Adobe Media Encoder CS5.5 X64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this payload from the dependency list.
WARNING: DW025: The payload with AdobeCode: {D8CCCF4C-C227-427C-B4BE-736657D2AB7E} has recommended dependency on:
                Family: Adobe Web Suite CS5.5
                ProductName: Adobe Media Encoder CS5.5 X64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this payload from the dependency list.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                Family: CoreTech
                ProductName: Adobe Player for Embedding x64 3.1
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                Family: Shared Technology
                ProductName: Photoshop Camera Raw (64 bit)
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                Family: CoreTech
                ProductName: AdobeCMaps x64 CS5
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                Family: CoreTech
                ProductName: Adobe Linguistics CS5 x64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                Family: CoreTech
                ProductName: AdobePDFL x64 CS5
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                Family: CoreTech
                ProductName: AdobeTypeSupport x64 CS5
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                Family: CoreTech
                ProductName: Adobe WinSoft Linguistics Plugin CS5 x64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has recommended dependency on:
                Family: Adobe Web Suite CS5.5
                ProductName: Adobe Media Encoder CS5.5 X64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this payload from the dependency list.
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Dreamweaver CS5.5 depends on Adobe CSXS Extensions CS5.5 to be installed.
ERROR: DW020: - Adobe Photoshop CS5.1 Core depends on Adobe CSXS Extensions CS5.5 to be installed.
ERROR: DW020: - Adobe Illustrator CS5.1 depends on Adobe CSXS Extensions CS5.5 to be installed.
ERROR: DW020: - Adobe InDesign CS5.5 Application Base Files depends on Adobe CSXS Extensions CS5.5 to be installed.
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe CSXS Extensions CS5.5 to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

i tried all the thinks listed and uninstalled then reinstalled creative suite 5.5 design premium and yet again this showed up at the end please help it mean nothing to me help!
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 17 error(s), 8 warning(s)
WARNING: DW024: The payload: Adobe Photoshop CS5.1 Core {08EF22BC-43B2-4B4E-BA12-52B18F418F38} requires a UI parent with following specification:
Family: Photoshop
ProductName: Adobe Photoshop CS5.1 Core_x64
This parent relationship is not satisfied, because this payload is not present in this session.
ERROR: DW025: The payload with AdobeCode: {857CC5F0-040E-1016-A173-D55ADD80C260} has required dependency on:
Family: InDesign
ProductName: Adobe InDesign CS5.5 Icon Handler x64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {857CC5F0-040E-1016-A173-D55ADD80C260} has recommended dependency on:
Family: Adobe Web Suite CS5.5
ProductName: Adobe Media Encoder CS5.5 X64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this payload from the dependency list.
WARNING: DW025: The payload with AdobeCode: {D8CCCF4C-C227-427C-B4BE-736657D2AB7E} has recommended dependency on:
Family: Adobe Web Suite CS5.5
ProductName: Adobe Media Encoder CS5.5 X64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this payload from the dependency list.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: Adobe Player for Embedding x64 3.1
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: Shared Technology
ProductName: Photoshop Camera Raw (64 bit)
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: AdobeCMaps x64 CS5
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: Adobe Linguistics CS5 x64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: AdobePDFL x64 CS5
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: AdobeTypeSupport x64 CS5
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: Adobe WinSoft Linguistics Plugin CS5 x64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has recommended dependency on:
Family: Adobe Web Suite CS5.5
ProductName: Adobe Media Encoder CS5.5 X64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this payload from the dependency list.
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging    0X1.9E3C8AP-1022rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f8049309 1e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Design Premium CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
----------- Payload: {BD85DFD4-005F-4219-8E27-C922CC4D8A61} Adobe CSXS Extensions CS5.5 2.5.0.0 -----------
ERROR: DF024: Unable to preserve original file at "C:\Program Files\Common Files\Adobe\CS5.5ServiceManager\lib\CSXS-Installer-Hook.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 130)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 130)
----------- Payload: {4C08199E-0D93-4227-8325-F024E71CA7A1} Adobe SING CS5 3.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "C:\Program Files\Common Files\Adobe\SING\Mark II\SING.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 2)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 2)
----------- Payload: {8DADF070-FE60-4899-8EF0-4242E7702F7D} Adobe Fireworks CS5.1 11.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at C:\Users\Isabel\Desktop\Creative Suite 5.5 Design Premium\adobe 5.5 code\Creative Suite 5.5 Design Premium\Adobe CS5_5\payloads\AdobeFireworks11.1.0All\OEM(Seq 1215)
----------- Payload: {5BDE0A1B-35BF-4224-A54F-73786EECDFC1} Adobe Fireworks CS5.1_AdobeFireworks11.1.0en_GBLanguagePack 11.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at C:\Users\Isabel\Desktop\Creative Suite 5.5 Design Premium\adobe 5.5 code\Creative Suite 5.5 Design Premium\Adobe CS5_5\payloads\AdobeFireworks11.1.0en_GBLanguagePack\OEM(Seq 74)
----------- Payload: {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 -----------
ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Terry\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Terry\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe SING CS5: Install failed
ERROR: DW050: - Adobe CSXS Extensions CS5.5: Install failed

Problem with running the midlet class (Error with Installation suite )

hi everyone...
i have problem with running the midlet class(BluetoothChatMIDlet.java)
it keep showing me the same kind of error in the output pane of netbeans...
which is:
Installing suite from: http://127.0.0.1:49296/Chat.jad
[WARN] [rms ] javacall_file_open: wopen failed for: C:\Users\user\javame-sdk\3.0\work\0\appdb\delete_notify.dat
i also did some research on this but due to lack of forum that discussing about this,im end up no where..
from my research i also find out that some of the developer make a changes in class properties..
where they check the SIGN DISTRIBUTION...and also change the ALIAS to UNTRUSTED..after that,click the EXPORT KEY INTO JAVA ME SDK,PLATFORM,EMULATOR...
i did that but also didnt work out..
could any1 teach me how to fix it...
thanx in advance... :)

actually, i do my FYP on bluetooth chatting...
and there will be more than two emulators running at the same time..
one of my frens said that if u want to run more than one emulator u just simply click on run button..
and it will appear on the screen..

HT201210 Hi i get an -1 restore error with the latest Os for iPhone restore

I am tring to restor an 3gs Iphone with the latest OS and all i keep getting is:
the Iphone "Iphone" could not be restored. A unknown error occured (-1).
The Iphine has NOT had Jailbreak so its not that. Any help would be great.
Cheers

Error -1 indicates a hardware failure. You'll need to bring your phone into Apple for evaluation.

INSTALLATION ERROR WITH CREATIVE SUITE CS1

I'm trying to resolve a problem with installing Adobe CS1. I've had to
re-install OSX 10.3 and upgrade to 10.3.9, and now find that when i install Creative Suite 1 it seemingly installs ok, then doesn't open up when you try to open the application and quits out immediately with the error mesage. I've had it working no problems when i first installed it (this was on 10.2.8 before i upgraded to 10.3) and then ok on 10.3.9, until i've had to re-install OSX 10.3 again and now it won't install at all!
I'm not Mr Technical whe it comes to the ins and out of Macs (i'm a designer, dont laugh!!) but some pointers as to what might be the problem would be greatly appreciated.
I've read through some of the questions here similar to this problem, and was hoping that someone had found a definitive solution to this problem with CS1!
Thanks...
Dave

Dear Dave,
I have never seen this problem but a quick check of the Adobe site had some information that might help you. Here are the links to two different tech docs.
Hope this helps.
http://www.adobe.com/support/techdocs/318468.html
http://www.adobe.com/support/techdocs/329590.html

Disk Restore Error with DU (HELP!!)

OK I created an image flawlessly or so I thought. When I went to restore and began the process, after I entered my Admin Password it looks like it will start and then I received the Error Message 'Cannot connect to helper tool' and the restore is aborted.
I have booted to the install DVDs, an external firewire partition and the MAC HD itself same error. The external drive has a boot partition and then the images are on the second partition.
Any help here is greatly appreciated.
iMAC Intelbased Mac OS X (10.4.9)

The only signed software, available for your phone, is iOS 7.0.3. That's why your attempts to restore are erroring out. If you want to update/restore, make sure you're running iTunes 11.1 or greater & do so through iTunes. iOS 7.0.3 will be installed on your phone.

Syncing following restore error with music

I have had to restore my iPhone and have been trying to re-sync my music and applications back but have been receiving an error message saying that I do not have permission to use some files, even though these are ones purchased from iTunes.
Even those files which will copy over remain greyed out on the phone menu in iTunes and the phone itself says it has no music content.
Any ideas?

One thing that might help out.
When you did the sync, did itunes show at the top a status bar of syncing the music files over?
If not, right click, or control click, on the name of the iphone on the left of itunes and choose reset warnings.
Now try syncing the music again.
If you have synced it to the iphone and the iphone shows no content, you might need to reset or restore the iphone.
Here are a couple of articles from the apple support website that might help out.
http://support.apple.com/kb/HT1737
http://support.apple.com/kb/HT1414
http://support.apple.com/kb/TS1275
Hope this helps.

Sync error with pc suite and E51

Everytime I try to sync I get an error message as follows:
"PC Sync has encountered a problem and has terminated the synchronisation."
Possible Solution:
"Please check your Synchronisation settings and ensure your phone is in the Idle state, then restart the Synchronisation."
I have changed the sync settings, and still get the same message.
I have uninstalled and re-installed PC Suite 3 times.
I have tried connecting via bluetooth and cable, same problem.
Windows XP
SP3
PC Suite 7.0.8.2
Any ideas on next steps?
Thanks in anticipation

I have this problem too. PC Suite clearly recognises the E51 and the other programs in the suite seem to work OK. But when I select Sync nothing happens. I have switched off Nokia email messaging just in case that was causing the problem but it makes no difference.
Has anyone found out what the solution is yet?

Error code: 12048 with Nokia Suite 3.3.86 and Noki...

I can't update any software with Nokia Suite, and I re-tried so many times but there was no difference. Can any body help me? I use Nokia X6 16GB. Thanks in advance!

This is part of the known USB connection problem with reboots.
Please check FAQ:
Q: While trying to update to Nokia Belle with Nokia Suite, I get an error
message stating that the connection to the phone was lost. What should I do?
A: It is normal that the phone loses connection during the reboot phase. If you
wait for a while it will automatically reconnect to your PC. If you lose
connection during the backup, installation or restore phase, please do the
following:
1. Disconnect the USB cable from your phone
2. Press your phone’s power button for about 10 seconds
3. Reconnect the USB cable
4. Wait for the installation to continue
Note: If this doesn’t solve your issues, try to connect your phone to another
USB port on your laptop or to a USB port on the backside of your desktop PC. In
some cases rebooting the computer also helps or using another PC to do the
update.
Cheers,
Marina
Nokia Suite team
Click on the Star Icon below if my advice has helped you!

HT1212 I am unable to get our of a continuous cycle when trying to update or restore my iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.

When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!

Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

My iphone 4s wont turn on with out being pluged in and when i unplug it it dies instantly i pluged it in put it in dfu mode and tried to restore it hoping it might help but its stuck in dfu and has restore error 21 help!!!

my iphone 4s wont turn on with out being pluged in and when i unplug it it dies instantly i pluged it in put it in dfu mode and tried to restore it hoping it might help but its stuck in dfu and has restore error 21 help!!!

Hey jestinsinclairr,
Thanks for using Apple Support Communities.
After reviewing your post, it sounds like you had one issue and then got a second trying to resolve the first. A frustrating situation for sure. The first article linked has what to do if it is not powering on unless plugged in. The second article addresses the error you are receiving when trying to restore.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Resolve iOS update and restore errors
http://support.apple.com/kb/TS3694#10
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
Have a nice day,
Mario

Error while restoring database with different name on subscriber

Hi all,
I am using merge replication in sql server 2008R2. Yesterday I wanted to create a test environment, so
I did:
1. on publisher I restored from backup production db with another name ( lets call it TEST and new files
.mdf, .ldf and no switch KEEP_REPLICATION). After this step original replication between production
dbs worked fine.
2. on subscriber I did the same: restore as new db TEST with new
files .mdf, .ldf and no switch KEEP_REPLICATION.
Unfortunately I noticed, that after second step replication stopped. SQL agent replication job on Subscriber
is gone.
Why restoring db with new name did affect original replication?
Finally the most important: replication was set up by external company and I have to bring it to live now
but I don't know this subject so good. How can I do it?
Assuming, that there is no data change on subscriber in replicated tables is it enough when I select ‘reinitialize’
on Publisher and Subscriber?
Thanks in advance
Artur

Hello,
Sorry for late response, but I was out of the office during last week.
Regarding problem 1: restoring replication. I contacted guy who made originally our replication and he recreated subscription agent. So this is solved.
problem 2: why did it happen?
Lydia, in link which you provided I found only info about restoring db in replication, but I didn't want to restore replication.
I checked SQL Server and Server Agent logs and there were no entries on that time. The only entries are regarding db restoring. Below:
09/11/2014 12:45:59,Backup,Unknown,Database was restored: Database: Logik_ATData_TEST<c/> creation date(time): 2012/04/27(13:55:41)<c/> first LSN: 21392:66:267<c/> last LSN: 21392:227:1<c/> number of dump devices: 1<c/> device information: (FILE=1<c/> TYPE=DISK: {'D:\MSSQLBackup\Dzienny\Logik_ATData_PROD\Logik_ATData_PROD_backup_2014_09_10_231001_6391536.bak'}). Informational message. No user action required.
09/11/2014 12:45:59,Backup,Unknown,Restore is complete on database 'Logik_ATData_TEST'. The database is now available.
09/11/2014 12:45:59,spid72,Unknown,CHECKDB for database 'Logik_ATData_TEST' finished without errors on 2012-04-26 22:50:05.490 (local time). This is an informational message only; no user action is required.
09/11/2014 12:44:53,spid72,Unknown,Recovery is writing a checkpoint in database 'Logik_ATData_TEST' (13). This is an informational message only. No user action is required.
09/11/2014 12:44:53,spid72,Unknown,Starting up database 'Logik_ATData_TEST'.
09/11/2014 12:44:51,spid72,Unknown,The database 'Logik_ATData_TEST' is marked RESTORING and is in a state that does not allow recovery to be run.
09/11/2014 12:44:51,spid72,Unknown,Starting up database 'Logik_ATData_TEST'.
In Windows application log there were also no other entries, besides these above.
I also could not check job history, because the job was gone in SSMS jobs list, while the subscription was present in SSMS Replication with info, that last successful synchronization was at 12:42 (there is a 5 min. sync period).
I also don't understand how the job was deleted, because according this manual (http://www.mssqltips.com/sqlservertip/1803/auto-alert-for-sql-agent-jobs-when-they-are-enabled-or-disabled/) I have 2 triggers in sysjobs table and every time, when
job is deleted/disabled I got @ notification. In this case I got no @.
My SQL Server version:
Product_Version Product_Level Edition
10.50.2550.0 SP1 Standard Edition (64-bit)
Any idea what happened?
Thanks,
Artur

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB. I get an error on my PC stating that device attached to USB port is not recognizable. Can anyone help?

Error 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694

6630 - Restore error with PC suite

Similar Messages

Maybe you are looking for