6650 fold: how to add new languages
Hello,
I have moved from a Nokia 3110 Classic to a 6650 fold which should be an upgrade and include all functions of the smaller model. With the 3110 Classic I could select Spanish as input language which helps quite a bit in writing messages (T9 adds accents, etc.). But the 6650 fold does not offer Spanish. I live in Germany and thus have the T-Mobile branding. How can I add more languages to the phone? I have plenty of space on my MicroSDHC card.
Thanks for the tip. I bought a higher end mobile with a Symbian 60 operating system to be ready for business and world wide use. Unfortunately, the 6650 fold is not suitable for this task. I expected that even more languages than on the 3110 classic are preinstalled on the 6650 fold, but this is not so. I believed that an advantage of Symbian 60 is to be able to install packages on the mobile like it is possible on the PC by downloading it onto the mobile. I do not bring my PC to my dealer just to change the language of the user interface or the input language. The mobile has a firmware and much space for storage of languages. I added an 8 GB microSDHC card. I am not pleased by this deliberate policy and will change to another more free operating system as soon as possible. Maybe I can even install another operating system onto the 6650, I do not know. Way to go for Nokia to provide a useful gadget for the travelling business user!
Similar Messages
-
How to adde New Language field value in CRM Business Partner Language Field
Dear all,
How can we add a new field value to the Business Partner Language field in CRM and ECC systems.
Your suggestions will be highly appreciated
Thanks
SravanthiHi Shravanthi,
You would need to add the new language to table T002. Once this is done, it will appear in the drop down menus.
Regards,
Rishu. -
Is it possible to add new language in General Setting?
Hi all,
I would like to add new language ("Cambodia[Khmer]") in General Setting in SAP and when i select that language, the system auto translate to khmer.
Is it possible to do that? if yes, can u tell me how to do?
Thanks
TONYHi Soeun,
You need to have S-User Id and password to open the link, Edy suggested. Still, I am sharing the Note with you:
Symptom
SAP Business One is currently available in 27 languages. While SAP may continue to increase the number of supported languages over time, it is not feasible to satisfy all possible demands.
Solution
The SAP Business One strategy is to empower its partners to take responsibility for the translation of the user interface (UI) into other languages, as needed.
To support this process we have added a new tool to the Installation and Upgrade package.
The Custom Language Tool (CLT) file 'CLT.zip' is located in the folder 'Packages' in the Installation or Upgrade packages.
It enables partners to:
Define an additional UI language
Generate a UI string source file to be translated into the new target language
Upload the UI string target file in the new language to SAP Business One
Make the new language available to SAP Business One users
For more information, see the 'User Guide - Custom Language Tool.pdf' contained in the package.
Thanks & Regards
Ankit Chauhan -
How to add azerbaijan language to sap portal
how to add new azerbaijan language to sap portal?İ want step by step configuration .Thanks advance
Hi,
please have a look at:
1013521 Configuration of supported languages within the portal
Best regards,
Nils Buerckel -
Guys,
I need to add a new language key in CRM 5.0. In Transaction BP when we select languages, how do we add new languages to the list?
AniIndividual languages cannot be added by a phone owner/user.
A specific/select set/combination of languages is put on devices intended for specific regions/countries.
This means that all possible combinations of languages that individual people might wish to see do not exist (such software packages, firmware, has not been created by Nokia).
And the only proper way of getting whatever languages are available, is to buy a device intended for the region/country where those languages are available. -
How to add new fields in Reduced message ( in BD53 )
Hi Experts,
How to add new fields in Reduced message ( in BD53 ), when the required field iis available in Table or Structure and need to be added in BD53 so that we can ALE.
Thanks,
NinadHello,
I think of something like:
First, you create extension, with transaction WE30.
Then, reduce your idoc, your extension should also be proposed.
Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
regards.
F.S. -
PLz Help me its urgent, how to add new field in mm01 basic data screen
Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee. -
How to add new line in message on my S890
My stock keyboard in Lenovo S890 doesn't have enter key, is this normal ? How to add new line ?
However this happened only in messages, while using whatsapp the enter key present.Hi,
the fact that your question is posted in Order Management section, does the move order automatically generated by OM?
nevertheless, i don't think you should (or allowed, in this case) to add a new line in transact move order. Transact move order only queries (not create records) the move order lines eligible to allocate and transact.
So, I don't see why you need to add a new line in transact move order.
You can, however, add a new line in the allocation of the lines, where for instance, you need to have half of the line allocated to one locator, and the other half to another locator
Thanks -
How to add New field in SMART forms.
How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PMHow to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM -
How to add new text field in standard report
how to add new text field in standard report?
Hi,
I presume you are talking about a report display in ALV and u wish to add a column to it .
If it is a global requirement ,as in table being used there in ALV can be modified, then you can append the table and the system should pick up the same automatically from there.
Otherwise , you can make a Z program . Modify the catalog being used in ALV.
Regards,
Shweta -
How to add new row and update existing rows at a time form the upload file
hi
How to add new row and update existing rows at a time form the upload file
example:ztable(existing table)
bcent smh nsmh valid date
0001112465 7.4 26.06.2007
0001112466 7.5 26.06.2007
000111801 7.6 26.06.2007
1982 7.8 26.06.2007
Flat file structure
bcent nsmh valid date
0001112465 7.8 26.06.2007 ( update into above table in nsmh)
0001112466 7.9 26.06.2007 ( update into above table in nsmh)
000111801 7.6 26.06.2007 ( update into above table in nsmh
1985 11 26.06.2007 new row it should insert in table
thanks,
Sivagopal RHi,
First upload the file into an internal table. If you are using a file that is on application server. Use open dataset and close dataset.
Then :
Loop at it.
*insert or modify as per your requirement.
Endloop.
Regards,
Srilatha. -
11.5.9/OAF 5.7 : how to add new fields in iProc "search results" page
We need to add new fields into iProc "search results" page - "Personalize Self-Service Defn" is et, we can enter the personalization screens (from both the "master" link at top/right page level or from the link above the region) - anyway cannot find how to add new fields. Do we have to go to AK developer and/or XML files or is it feasable from OAF (as it is with 11510) ? TIA.
It depends on what fields you want to add.
1. If Oracle has included the fields, just render them via personalizations
2. If they are brand new fields:
a) you will need to extend the VO (I do not know the exact name).
b) change the query to get your extra db columns if necesary
c) add transient attributes to the VO and map them to b).
d) Then you need to add the items via personalization and map them to the attributes you created in c)
Check on metalink for the lates version of OAF Dev Guide and Personalization guide.
Thanks
Sandeep -
Query: How to add new fields in ABAP query?
Hi All,
Can any one tell me how to add new fields in the ABAP query output?
We have to add the new fields using query design or we have
to add those in the background program(automatically generated behind query) by selecting new fields in the code?What kind of report? Usually, you have to add the field in the table declaration and then also in the SQL query. After that, include the field in what kind of report you are using.
-
CRM IC Winclient - How to add new fields in the BP Search of TRX CIC0
Hello Experts,
I want to know how to add new fields in the BP Search of TRX CIC0. In the HTML that we're using here I need to add the URL of the BP.
Can you help me?
Thanks in advance.
Caíque EscalerHi
make append to tables in se11 - CCMBP1FIELDS, CCMBP2FIELDS
in spro in Define customer-specific search control -> mark fields with X.
and enhance html template CRM_CIC_SEARCH_DISPLAY. -> tcode smw0, look for package CRM_CIC_COMPONENTS for html CRM_CIC_SEARCH_DISPLAY. export it from SAP, edit, and import.
you will need to enhance function module used for searching - you will find him in spro in Search Strategies.
Regards
Radek -
How to add new fields to picklist of search criteria for opportunities
Hi Friends,
Could you please tell me how to add new fields to the picklist of search criteria of Opportunities in WEBCLIENT(CRM 2007).
Regards,
VijayDear Vijay,
We are facing the same problem over here.
Have you managed to find a solution? Please share
BR,
Rohit
Maybe you are looking for
-
E72 - How to Remove Home Screen Links
Hello, I have a Nokia E72 and I have a customization problem. I have a gmail account installed in the phone and there is a homescreen link for it, just under the applications bar at the top. The thing I want to delete this link from my home screen bu
-
Please allow us to use IOS 6 icons on IOS 7
IIs it possible to have a choice to use icons from ios6 instead of ios7? The new IOS7 icons are big and poorly designsed meant for children.
-
Wrong character encoding in error messages
The Java compiler can be adjusted to source file encoding with the option javac -encoding ... The Java runtime can be adjusted to terminal encoding with java -Dfile.encoding=... While this appears somehow inconsistent, it works and can be used e.g. w
-
Problem in installing Agent10 on Linux box
Hi, I have tryed to install Agent10g on a linux box abd tryed to connect it to the OMS running on Windows XP. I choose the installation option agentDeploy option by running agentDownload.linux it worked fine by downloading all the files and used the
-
Broken link for recording of hybris integration gem
https://www.adobe.com/cfusion/event/index.cfm?loc=en_us&id=2232535&event=set_registered the above link is broken