6680 and hds-3 headset

i have the nokia 6680 phone, with the hds-3 headset. however the phone stops recognising that the headset is plugged in after a couple of minutes, meaning the music plays through the speaker not the headphones, and as i use it in the library its not very helpful! what can i do about it? thanks

The 6680 is based on the Symbian operating system version 8.0a, and Nokia S60 (Series 60) 2nd Edition Feature Pack 2.
That (the Symbian/S60 versions) will not change over the lifetime of the phone, but the phone software (firmware) can be updated by a service center:
http://www.nokia.com/repair
You will see current the firmware version/revision on your phone by "dialling" *#0000#

Similar Messages

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4. However, I cannot record voice memos with my Bluetooth mic.

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4, so it appears my headset mic is fine. I can also use voice activated dialing, although it fails miserably interpreting numbers. However, I cannot record voice memos with my Bluetooth mic. I just get barely audible static. Any suggestions? Thanks.

Hello, did you ever get an answer to your question? I just picked up a Jawbone Era and using on an iPhone 4s running 5.0.1. Seems to work fine on regular calls, but not on the built in Voice memos application. It worked fine on my older Jawbone Icon, but haven't tested on the 4s or iOS 5.
Thanks!

Is there a software in which I can hook up my iPhone 4s to my computer and send and receive text messages and calls (via headset) through my computer?

Is there a software in which I can hook up my iPhone 4s to my computer and send and receive text messages and calls (via headset) through my computer? Whether it's free or cost money, can someone please give me a name of a program or software that allows me to do this? I can't seem to find anything like this for the iPhone.

No.

I am having trouble connecting my bluetooth headset on the ipad 1. I have now been told that Apple is only allowing several headsets to be used with Ipad. Is this correct? I have a grundig headset and a plantronics headset but these can both not be found

I am having trouble connecting my bluetooth headset on the ipad 1. I have now been told that Apple is only allowing several headsets to be used with Ipad. Is this correct? I have a grundig headset and a plantronics headset but these can both not be found

Check this out....
http://support.apple.com/kb/HT1664

6680 and 2gb MMC

Hello I've seen many adverts for 2gb MMC's that are compatible with the 6680 so took the plunge and bought one. It is from a reputable manufacturer who also made the 512k cards I've been using for some time. My problem is that when I insert the 2gb card the phone returns a "no card inserted" error. I have tested the card on a PC and it had no trouble recognising the card. I have even upgraded my firmware to V5.04.07 just in case mine was too old to support 2gb. Are all these adverts wrong and the 6680 is not compatible with 2gb? If not, is there soemthing I can do to get my phone to recognise the card? Thanks. Daz.

Interesting posts guys, and "yes" I too have a 6680 and a nice 2Gb DV RS-MMMC card.
Sadly also I get the "no memory card inserted" error.
The question still remains unanswered though - does the 6680 support 2Gb cards?
I use mine for sat nav and need more than 1Gb to store the map data so I really need this to work!
I may have to try returning my card to Kingston (and I thought they were supposed to be reliable manufacturers!) but there's not much point if the 6680 just isn't going to work with it.
As a point of interest the kingston site does not list the 2Gb card as being compatible -
http://www.ec.kingston.com/ecom/configurator_new/modelsinfo.asp?SysID=22482&mfr=Nokia&model=6680+Smartphone&root=&LinkBack=&Sys=22482-Nokia-6680+Smartphone&distributor=0&submit1=Search

Mac mini and Logitech gaming headset

I have a 2008 Mac Mini running 10.6.4 and I want to use a Logitech headset for online gaming but I can not make the microphone work. The output works fine, but the input wont register at all. The mic uses two standard jacks, one for input and one for output and they are connected directly to the back of the mini but it get no recognition that a mic is attached at all.
Anyone know how to get the mini to recognize the mic?

The line should be the mic option assuming you have a line in and a line out connection on the back of the Mini and the sound out and mic in connectors are plugged in to the right connections.
I have a USB camera with built in mic ( Playstation Eye ) connected to one of the USB ports which I use for the mic and it shows up below line in in the settings so I don't use the line in unfortunately.
The line in is meant to be the mic input. I have a late 2009 Mini and it has a line in and a line out as in the picture in the link below. Is yours the same ?
http://support.apple.com/kb/HT3478
Having looked at the specs on that page again it seems as if the line in may not support mics after all. The other option would be to get a USB adapter with a female line in and line out and connect the headset to one of the USB ports as this should work. I've done just that on my MacBook Air which is running 10.6.3.
The Playstation Eye on my Mini is connected the same way. If you can't find an adapter for your existing headset then you might need to consider buying a new one that does have USB as an option.
...

I accidentaly pressed on "forget this devise" in the bluetooth settings. Now my iPhone would not even list my headset. How can I reverse what just happened and connect my headset? Can anyone assit please?

I accidentaly pressed on "forget this devise" in the bluetooth settings. Now my iPhone would not even list my headset. How can I reverse what just happened and connect my headset? Can anyone assit please?

You need to put the headset into pairing mode. The phone should then see it even though you have done the forget this device.

Trouble with Nokia 6680 and iSync

I have a Nokia 6680 and an iMac. Recently I wanted to clean up my contact list but I'm having problems in this.
Contacts created in the phone get transfered to my computer with iSync easy, but I can't transfer all my contacts created in my iMac to the Nokia 6680.
It used to work sincronizing a hundred contacts, but now I can't do it with 40 or 50. It's supposed to work all the ways but it doesn't.
What should I do? Is there any kind of limitation with my phone or iSync?

Hi trav!
We're having the exact same problem. If you search this forum (and others), you'll find more threads regarding this issue..
http://forum.java.sun.com/thread.jspa?threadID=641445&tstart=60
http://discussion.forum.nokia.com/forum/showthread.php?s=61e4114bdf2a110921bfd4bc2af40862&threadid=64240
It seems to be impossible to get in touch with Nokia developers. They are probably on vacation..
We've struggled with this for about 2 weeks now,and the most likely reason is:
1. It's a bug
2. The locator url has changed since the phone has two cameras.
Cheers,
H�vard

NO CONNECTIVITY THRU USB CABLE - 6680 AND 6131

HI FRIENDS, I VE BEEN USING 6680 WITH USB CABLE TO CONNECT TO MY PC (WINDOWS XP, SP2)WITHOUT ANY PROBLEMS. RECENTLY, WHEN I TRIED TO CONNECT MY NEW 6131 THRU USB CABLE, PC SUITE COULDN'T RECOGNISE THE DEVICE. I TRIED INSTALLING THE DRIVERS. THEN I KNEW I REALLY MESSED IT UP. NOW BOTH 6680 AND 6131 ARE NOT RECOGNIZED BY PC SUITE. EVEN THOUGH THE PHONES SHOW USB ICON (CONNECTED) AND MY PC RESPONDS WITH A BLING!, PC SUITE SHOWS 'NO PHONES CONNECTED'. DEVICE MANAGER SHOWS ALL USB PORTS WORKING PROPERLY. WHEN 6131 IS CONNECTED, PC RECOGNIZES IT AS A USB DEVICE, AND OPENS THE FOLDERS. SINCE PC SUITE DOESN'T CONNECT, I AM UNABLE TO INSTALL APPLICATIONS OR ANY OTHER THING. CAN U PL HELP.

What type of wireless-router do you have? Who is your ISP and what type of connection do you have (ADSL, DSL, Cable, FIOS, etc).
Next, if you have a wireless laptop available (or one you can borrow), please download our Network Diagnostic Utility located here. Select "Show Advanced Tools" and then select "Display Detected Wireless Networks". Tell me the names (SSID), signal quality and channel numbers for all of the detected networks. Also, tell me which one is yours.
Finally, let's try resetting the printer. Turn the printer off and then unplug the power supply. Then while pressing and holding the # the 6 keys, plug in the printer power. Hold the keys for 10 seconds then release. After the printer initializes, see if you can connect wirelessly to your router using the printer's front panel wireless setup wizard (press setup, select network then wireless setup wizard).
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Xperia Z1, Problem with OTG and Sony PS3 Headset Pulse USB Adapter

Hi, I did a bit of testing, with headphones Sony PS3 Wireless Headset Pulse , I state that both the adapter and the Sony Pulse Headphones work perfectly on PC and PS3 via the USB adapter , then connect the adapter via USB OTG connection on the Sony Xperia Z1 . With much regret I noticed that the connection between the USB adapter and headphones was established , but the audio was transmitted jerky and scratchy . So I decided to try again via USB OTG headphones Logitech F540 (again, via USB OTG, not via audio jack) , and with much enthusiasm I noticed a connection quick and efficient , without cawing and smoothly ; clear sound as if they were of the headphones connected directly to the Audio Jack with wire . I then decided to try another pair of headphones USB (for PC) , the Creative HS -1200 , connecting via the USB OTG adapter receiver headphones ( ie the same thing I did with Sony and the Logitech ) ; also in this case the Creative Wireless Headphones have received the sound from the USB receiver , without any problem or distortions . Now I want to understand how it might work all this variety of USB devices not Made by Sony , connected via the OTG port , but do not work Devices Made By Sony ? You can solve this problem with the Firmware right?
The firmware installed in my Xperia Z1 is 14.1.G.1.534 .
The OTG cable is fully functional with a multitude of devices (USB HD 2.5 Inch, USB pendrive, USB Audio, USB Mouse and keyboard).
For your info, I already tried to connect the OTG, to a powered USB 2.0 HUB, and on the HUB USB, connect the adapter from Sony and the result is one and the same. The USB adapter will light as the Sony Z1 directly connected to the OTG, but the sound from the speakers gets crackling and jerky. I tried to connect the USB adapter of Sony headphones, and then connect the cable from USB jack to the audio jack of Z1, and of course the audio works perfectly, because it bypasses the USB audio sent by Z1, going to use the 'Jack audio input, and using the USB Headset adapter (Sony Pulse) as a simple transmitter.
Thank you to anyone reply to this.
Edit: i have try with samsung S3 and Samsung S4 with OTG and the Sony HeadSet Pulse work fine with the USB Dongle. The problem is on the firmware audio of the Xperia Z1.

Two possibility
The driver is not right
Or the second i know and it's not possible to fix , they can happen on any audio device with any pc or other host
You can try your headset over a usb hub with a extern power source and connect the usb hud on your phone , if this not continu it's a power problem with the usb port
Sometime a usb port cannot provide suffisent power and that affect the audio or any data transfer , a usb hub provide on each port the power they need so when you cronnect your headset that give the good power to him
Few friends know this issue with a variety of device
One use one device on each port on his pc and there happen the pc cannot provide suffisent power for his headset , I suggest to use the minimal on his usb port and he don't have the problem , I suggest to buy a usb port power by an external source and that fixed the problem
If his your problem no update can fix that for fixing you need a Y cable to give more power to the usb port of your celphone and using a external power source (portable charging , solar panel custom 5v usb port with AA batterie)

Kensington LiquidAUX and a bluetooth headset?

I'm looking at buying the Kensington LiquidAUX to charge my iphone in my car (my car stereo has in aux input). I have a question about taking phone calls with it: the LiquidAUX comes with a remote, which I want to use. The remote is bluetooth. Will the iphone have any issue connecting with both the remote and a bluetooth headset at the same time? I assume it can pair multiple blue tooth devices at the same time, right?
I want it to be so that I'm playing music through my iphone (via aux input), that I can easily switch over and take phone calls on a bluetooth headset....
thx.

Two points here, firstly if you go to Menu > Settings > Connectivity > Bluetooth > if you tap middle icon on top row with two Bluetooth icons - is headset authorised with padlock icon beside it and secondly, if you go to Menu > Settings > Phone > Accessories > is headset set as default (longpress on Headset to reveal this option)?
Happy to have helped forum in a small way with a Support Ratio = 37.0

HT1602 Can I use Nike+ sensor and a bluetooth headset simultanously???

I am planning buy a Ipod Nano for running. And I want to use a Nike+ shoe sensor and a bluetooth headset.
Can I use them at the same time? Or bluetooth only accepts one connection at a time?

No
Get a bluetooth headset.

Bluetooth version 1.1 or higher and support a headset and /or hands-free profile.

Does the MacBook Pro running 10.8.5 have Bluetooth version 1.1 or higher and support a headset and /or hands-free profile?
SM

Hi SLM01,
If you are looking for more information on supported Bluetooth specifications and standards for OS X 10.8 Mountan Lion and the MacBook Pro, you may find the following pages helpful:
OS X Mountain Lion: Bluetooth profiles supported by Apple Bluetooth software
http://support.apple.com/kb/PH10549
Apple Support: Tech Specs - Mac notebooks
http://support.apple.com/specs/#macnotebooks
For more information about using Bluetooth headsets with your Mac, you may find this article useful:
OS X Mountain Lion: Use a Bluetooth headset with your computer
http://support.apple.com/kb/PH10557
Regards,
- Brenden

6680 and mac conection woes

I wanted to sync my diary on my mac to my phone. So at expense I upgraded my phone to a 6680 and bought Tiger. This is the only way of getting isync 2 which supports the 6680.
Can get to computer to see the phone and isync to send the SyncAgent. But when I try to open it on the phone I get the error 'Installation security error Unable to install'
Can anyone help as this is very frustrating. If I had known this was not going to work I wouldn't have spent the money.
Thanks
oneri

you have to change your applicaytion installation settings in your phone to allow installation. Check user guige or this forum ( or goole the error message, uyou will get instructions how to do that)

Save $40 on Select Astro and Skullcandy Gaming Headsets

Gamers Club Unlocked members can save $40 when they purchase a select Astro and Skullcandy Gaming Headset on BestBuy.com.
Offer valid: 08/02/2015 - 08/15/2015
Offer available ONLY online
Shop BestBuy.com® and use your My Best Buy™ member ID.
“Must be a My Best Buy Gamers Club Unlocked Member to receive savings. My Best Buy Gamers Club Unlocked Member program is a 2-year paid membership and is valid in the 50 U.S./D.C., excluding P.R. Membership activation must take place in store only. Membership is nonreturnable and nonrefundable. Add a qualifying headset to your cart and save $40.”
Thank you for being a My Best Buy™ member and game on!

Are u sure your are talking about database?
Why you need multiple database in one machine?
Just a note: What we called in database in sql server is called schema in Oracle.
In Oracle normally we keep only one instance in one machine (multiple also possible) and create multiple users and Schemas.
Thanks,
Raj
www.oraclebrains.com

6680 and hds-3 headset

Similar Messages

Maybe you are looking for