6680 Cannot update firmware

AMigos
I have tried updating my firmware from ver 4.0.04 to no avail using the Nokia software updater. It will make my screen dead and then later on, the Nokia updater will say my phone has not been updated. What gives?

I had the same problem with my 6680, so I went to the location where I purchased it and they updated the software (It really needs to be done for the phone to work properly, I had nothing but aggravation until I update the software/Firmware). My retailer Installed Version 5.04.07 15-20-06 RM-36 (Nokia website only has a version 4xxxxx). Since this was done my phone has been a joy to use, in fact I used to purchase a phone every 6 month, I've had this 6680 for over a year and I have no desire to exchange it. Since the software update it works like a dresm... So go to the retailer you purchased your phone from, they have to be able to update the software/Firmware and by the way my retailer, "Kings" of Longford/Roscommon Ireland (an authorized Nokia/.Vodafone dealer) DID NOT Charge me a penny for updating the software... Some food for thought. I hope this is of some help....
Jdeehere

Similar Messages

Cannot update firmware in e61

Hi
I cannot update my e61 firmware with Nokia updater program.
current one is:
1.0610.04.04
19-04-06
RM-89
the number behind battery is:
0536127
I also updated the pc suite but it didn't help.
also I had some proplems in seminar, i tried to hook in wlan which was in our use but the phone constantly reboot itself.
HELP!!!Message Edited by lemtz81 on 23-Nov-2006
06:40 PM

13-Aug-2008 10:01 AM
smarteee wrote:
Although a 3rd option has presented itself since my original post and is becoming more attractive - Get my phone unlocked/wiped or hack the phone and change the product code.
That particular operation cannot be discussed on these forums since it voids your warranty.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

N95 cannot update firmware in Australia?

Hi,
I have a Nokia N95 purchased on 7th August 2008 from Telstra Australia on a 24 mth contract. Firmware is V10.2.006, I would like to update the firmware to the latest version to hopefully iron out a few bugs and generally speed this thing up. However, when trying to update via a PC/USB through the Nokia updater application I keep receiving the message that my firmware is already up to date. It quite obviously is not, research has indiacted it is V21 or later. Can somebody please explain why this service is not available to me?
Thanks all,
Smarteee.
Solved!
Go to Solution.

13-Aug-2008 10:01 AM
smarteee wrote:
Although a 3rd option has presented itself since my original post and is becoming more attractive - Get my phone unlocked/wiped or hack the phone and change the product code.
That particular operation cannot be discussed on these forums since it voids your warranty.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Cannot update firmware on MFP M125NW

Trying to update an MFP M125NW with the latest firmware.
Printer is connected and online both via network and USB.
Get the message:
Problem Found
HP Device Update Cannot Proceed
1. Check that your device is:
- Connected to your computer (it is as a stated above)
- Powered On (yes and I have cycled the power several times)
- Not in an error state (it isn't).
2. Clear any error states (there aren't any)
3. Click Start Again (I have many, many times).
Anyone have any constructive suggestions ?
I have already tried running the update program as administrator and that made no difference.

Reluctantly did a full reinstall of software and drivers with latest available download.
Yet again went through the great joy of having to disable all non essential services to allow the install process to work. Never had to do that for any other printer.
Printer now connected wirelessly as suggested.
Still point blank refuses to install the firmware update.
It is shameful that a company the size of HP with vast resources cannot issue an update that is easily installed.
Can someone please provide some constructive advice to resolve this issue?

Help!!!Cannot update firmware N95 v20 to v21

Could anyone help me with this problem
i've installed NSU and nokia pc suite(all latest..)
i've plug the my n95(v20), detected by PC suite...
i run NSU,, detected,,, and downloaded v21 firmware for n95 (112mb)..
after it finished downloading, when it try to install it.. it says
"Downloading update failed"
"internal module error"
maybe i didnt read the instruction about change profile to general..
i changed it to general, the problem still the same...
okay maybe after i didnt change profile there is some file left in my phone.. so i decided to soft n hard reset.... and i connect again... still showing the same problem, after it finished download...
so i used my other computer(maybe there is some problem with my vista), so i used my XP...
and it still showing the same problem..
i've used that msxml4 solution, but it still didnt work...
Please help me....

28-Mar-2008 01:07 PM
blue_panther9_9 wrote:
Could anyone help me with this problem
i've installed NSU and nokia pc suite(all latest..)
i've plug the my n95(v20), detected by PC suite...
i run NSU,, detected,,, and downloaded v21 firmware for n95 (112mb)..
after it finished downloading, when it try to install it.. it says
"Downloading update failed"
"internal module error"
maybe i didnt read the instruction about change profile to general..
i changed it to general, the problem still the same...
okay maybe after i didnt change profile there is some file left in my phone.. so i decided to soft n hard reset.... and i connect again... still showing the same problem, after it finished download...
so i used my other computer(maybe there is some problem with my vista), so i used my XP...
and it still showing the same problem..
i've used that msxml4 solution, but it still didnt work...
Please help me....
28-Mar-2008 01:07 PM
blue_panther9_9 wrote:
Could anyone help me with this problem
i've installed NSU and nokia pc suite(all latest..)
i've plug the my n95(v20), detected by PC suite...
i run NSU,, detected,,, and downloaded v21 firmware for n95 (112mb)..
after it finished downloading, when it try to install it.. it says
"Downloading update failed"
"internal module error"
maybe i didnt read the instruction about change profile to general..
i changed it to general, the problem still the same...
okay maybe after i didnt change profile there is some file left in my phone.. so i decided to soft n hard reset.... and i connect again... still showing the same problem, after it finished download...
so i used my other computer(maybe there is some problem with my vista), so i used my XP...
and it still showing the same problem..
i've used that msxml4 solution, but it still didnt work...
Please help me....

NMH305 - Cannot update firmware

Dear Support,
Last week I have acquired the Linksys MediaHUB NMH305. After unpacking and following the instructions I start looking around on the web interface.
While doing that, I also checked the website and saw that new firmware was available.
When I matched my current firmware version with the new available, I saw that my HUB was seriously out of date, so I decided to upgrade my version via the webinterface.
Current Version FW: 2.17.8
So in the browser, I went to configuration, typed in my password and below it says:
Firmware Update:
Latest Firmware Version:
And a big button with "Update" on it. So I pressed the button and the interface said that new firmware was available.
When I pressed Update, nothing happens untill the webinterface came back with the following notification:
"Error - Result"
Firmware Upgrade has encountered an error.
Upgrade Aborted!
While contacting my local support, they suggested that I reset my devive (Reset button + 40sec) and reconnect to it again and update it again.
Unfortunately, there was no success.
The way I have setup my LAN environment is, that I have a router where my NAS and PC's are connected to.
The NAS is working fine while my other PC's can access internet without any problems.
I hope you can answer my questions:
- Why can I not update my NAS via the webinterface?
- Are there any ports, that needs to be forwarded or opened on my router?
- Is there a way to manually upgrade my HUB?
For the rest, the NAS is working fine, I can move my files to it, access it and FTP is working too.
But I saw in the release notes many improvements which I would like to have as well but unfortunately I am on the initial/ga release of the firmware
Please help
Thanks in Advance
Bests
Paul

Btw, I have been reading through the forum and encountered a smiliar topic mentioning the same error as I have.
The fix for that person, was to change his DNS to the IP address of the router.
When I checked mine, I saw that the first DNS server was pointing to my router while the second was directed to my ISP's DNS.
So I unchecked the "enable dhcp" and fill in both my ISP's DNS IP Adresses and still no result.
The weird part is that, when I press update it sees that new firmware is available but when it tries to download, it comes back with the error.
Greets
Paul

N86- cannot update firmware to v30

i keep receive this message.
installation failed. the connection to the device was lost. make sure the USB cable is connected directly to the computer and try installation again. if your device does not start, try recovering the device by following the instructions in the nokia ovi suit help.

When a new device update is available, the software update is downloaded to your computer automatically. You can use Nokia Ovi Suite normally while the download is ongoing. From Tools > Options > General you can define whether you want automatic downloads to take place.
Note:
You need to have an active internet connection for Nokia Ovi Suite to be able to download the software updates to your computer, as well as install the updates on your device.
If you are connected with a modem, the automatic download is not active by default. You can still download the software updates manually. Take into account that this might cause higher data transfer costs.
Good to know about installing the device software updates
To be able to install device software updates, you need to be signed in to your Nokia account. To sign in, or if you do not have a Nokia account yet, click Sign into Ovi in the Nokia Ovi Suite top navigation bar.
If your device is connected via Bluetooth, switch the connection to a USB cable.
If you have encrypted your memory card, decrypt it prior to updating your device software. If you do not decrypt the memory card, it cannot be accessed anymore after the update has been installed. After decrypting the memory card, you can update your device software normally.
When the opportunity to make a backup comes during the wizard, it is recommended that you make the backup to minimise the possibility of losing any important data. Content such as your contacts, calendar and messages are always included in the backup
Note:
If you have any device applications you have installed yourself, such as games, it is very advisable to make a backup of your device content, because the applications might not work after the update.
You cannot cancel the software installation once it begins. Note that if the phone recovery window opens during the device software installation, do not try closing it but follow the on-screen instructions.
Warning!
Do not disconnect your device during the installation in order to avoid loss of information and device malfunctions!
After the installation of the software update is complete, the wizard proceeds to the restoration of the device content. Here the possible scenarios are:
If you made a backup earlier during the wizard, the content of that backup file is automatically restored to your device.
If you did not make a backup during the wizard, but you have older backup files on your computer, you can restore the content of one of those. In this case you can choose which backup file to use.
If my post helped you, click on Kudos button and if my solution provided is opt 2 u, accpt my solution

Cannot update firmware on a brand new Airport Express

I just got a AirportExpress base station to extend the wireless range of my Airport Extreme (Gigabit Ethernet). I hooked everything up and configured my network. I ran the firmware update for the AExtreme and it worked. For some reason the same thing can't be done on the Airport Express. The updater just idles for a while and returns an error code (-6722).
How do I fix this.
Any help is greatly appreciated.

OK, you have proven to yourself that you are not losing speed over Ethernet.
Wireless is half science and half voodoo.
Sometimes, having a laptop very close to a wireless router will overload it, causing a drop in speed.
There may be a "hidden" network at a house near you, which is causing interference. This will not show up on most scanners
Could be a cordless phone in the area causing difficulty. Won't show on a most scanners.
Could be a wireless camera/security system at a house nearly causing some issues. Won't show on most scanners
Could be a USB3 hard drive doing the same
Could be a BlueTooth device.....wireless mouse, keyboard, headphones....doing the same
Could be gremlins. I have them here at times.
You could try another Express. Might be better, might be worse. Expect anything.

Cannot update firmware on Sun Ray 170

Hi all,
I need to update the firmware on a Sun Ray so I get the GUI firmware, as I need to enter the server IP manually.
I run this:
/opt/SUNWut/sbin/utfwadm -AaV -f /opt/SUNWut/lib/firmware_gui -u
and get the output:
CoronaP1 GUI4.0_48_2007.08.01.15.48
CoronaP2 GUI4.0_48_2007.08.01.15.48
CoronaP3 GUI4.0_48_2007.08.01.15.48
CoronaP4 GUI4.0_48_2007.08.01.15.48
CoronaP5 GUI4.0_48_2007.08.01.15.48
CoronaP6 GUI4.0_48_2007.08.01.15.48
CoronaP7 GUI4.0_48_2007.08.01.15.48
SunRayP8 GUI4.0_48_2007.08.01.15.48
and then this:
/opt/SUNWut/sbin/utfwload -HalL
For this command I get the output:
Upgrading units to version GUI4.0_48_2007.08.01.15.48:
DISP User IP Address Model.Mac Firmware Version
3.0 ???? 192.168.201.230 OEMRayP7.0003bad74e7b MfgPkg_3.32,nocrypt-03,REV=2005.06.03.15.20
And the Sun Ray shows it firmware update icon for a second, and then display a pink/purple bar along the top of the screen, on causing the screen to refresh, by for example logging in, the pink bar goes away. The Sun Ray is left unupgraded however.
Anyone have any ideas?
Thanks
Garry

I have had no trouble in the past upgrading firmware.
After the initial utfwadm command I do a utfwsync. This will force a download of the firmware but will disconnect all users.
Then afterwards I check the firmware on the sun ray client with the usual ctrl-V and Pause key.

Cannot update firmware on my N97

I'm currently running firmware version 20.2.019 and when I put my phone's info (RM-507, product code 0576111) into Nokia's website it tells me V21.2.045 is available. However, when I try to download the firmware via OTA or NSU, it tells me no updates are available.
What would be preventing me from updating the firmware? Is there another way to download it or is my only option sending the phone to Nokia?
N97 RM-507, N95-3

If there is a newer fw for your device but youre not able to install it due to pc problems, I would try to lend a pc from a friend or take it to a Nokia care point and ask if they could update it.

Cannot update firmware on specific computer

I've been having problems updating the firmware on my iPhone4 (and my friend's iPhone4) on my MacbookPro.
I've had this problem since I've gotten my iPhone 4 with firmware 4.2 trying to update to 4.2.1, 4.3, 4.3.1 and now 4.3.2. What I've had to do was update my iPhone 4 with my iMac and then restore from backup on my MacBook Pro. (this was one of the workarounds that Apple suggested on their knowledge base).
The strange thing is, I can update my iPhone 3GS with this MacbookPro just fine. But not iPhone 4.
I've tried to uninstall and reinstall iTunes... with no luck.
Symptoms:
When trying to update previously, the iTunes will delete the old firmware and try to install the new firmware. The process would hang at installation of the new firmware. The iPhone would display the picture that I should connect the iPhone to the computer for update. When it tries to install the firmware package, it would just error out and go back to the picture.
Now with the newest 4.3.2, iTunes won't even delete the old firmware from the phone. It would have the message saying something along the line that the firmware isn't compatible with this iPhone. But... I can take the same firmware from my MacbookPro to my iMac and it would update just fine.
Anyone has ideas why this is happening and how I can fix it? I'd really like to be able to just rely on my MBP especially since I'm on the road a lot.
Thanks.

I have had similar problems. Here is what I found. Not all USB ports are powered. Apple apparently (rightfully) thinks that when doing a major firmware update that the unit should be powered. I tried different USB ports until I found a "hot" one (charging indicator comes on on the phone) and use that one all the time. So far, so good.

Cannot update firmware

first, to Tessarex, thanks, your suggestion for a hard reset of the extreme base station worked. I connecting to thos forum wirelessly. Now I want to update my firmware 4. whatever to 6. whatever, but when i type in what i thinki is my IP address (what's the format of it, anyway?). I get a message saying there was an error connecting with thhis base station. It sounds like the latest firmware might prevent some of the dropouts people are reporting. Software update doesn't seem to recognize I have old firmware. I downloaded the update from the Apple site, but I can't load it onto my Airport Extreme base station. Any ideas? thanks!
Rick

See if this Apple article will help you with the firmware upgrade: http://docs.info.apple.com/article.html?artnum=107844

Cannot update firmware to Officejet Pro 8600 N911a

I just downloaded the new firmware version CLP1CN1322CR and try to upgrade from the current CKP5CN1334ER. The installation tells me that my printer and current firmware is "Not Applicable" and I cannot do anything then. Anyone having a similar issue? Is there a solution?

Hi, you already have the latest firmware installed.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Blinking amber light, cannot update firmware on Airport Express

Hey all:
I can't find a prior question that addresses this problem exactly.
A couple of weeks ago (about the time that AE Firmware was updated to 7.4.1) my AE started blinking amber. I was concurrently getting alerts that Airport Utility was finding a problem with my Airport Extreme, that it needed to have the firmware updated to the new version.
When I try and update the firmware, though, the progress bar just zips along with nothing coming down. I can't get the update.
This seems to have NO effect on my internet use, including three household computers connecting to the internet or to each other. I'm fine - but a little concerned.
I tried to reset things manually, thinking if I start from scratch and basically reinstall the unit that would help, but it just kinds of spins its wheels and doesn't actually go into into settings windows.
Ideas???
Thanks much in advance
Carlos

You post may have more answers if posted in the airport section of the forum. That being said I would suggest you open airport utility select your base station and then from the base station menu choose restore default settings. Then try updating the firmware.

HT1218 Cannot update firmware on Extreme.

All I get is the following message. "This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later." So there is no access to an "UPDATE" button.

I have had no trouble in the past upgrading firmware.
After the initial utfwadm command I do a utfwsync. This will force a download of the firmware but will disconnect all users.
Then afterwards I check the firmware on the sun ray client with the usual ctrl-V and Pause key.

6680 Cannot update firmware

Similar Messages

Maybe you are looking for