#6680 - connecting car hands-free + speaker to pho...

The 6680 phone fails to operate through the car hands-free unit (amplified speaker + mike). The phone remains in normal mode for receive/call.
The cable connection (plug and cradle is OK) as the phone charges when connected.
Grateful for some comments/help.
MikeS

try disconnecting the conector from the bottom of the cradle and plugging into bottom of the phone, i this works then you have either a dodgy cradle or a poor conncetion, this connector is easily knocked out of place. Has this kit been working ok previously or have you just aquired it.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

Similar Messages

  • Bluetooth connection to car hands free

    i have a motorola car hands free kit installed with my old 6230i the connection was automatic but i now have a 5500 sport this needs to be re-installed every time i get into my van does anyone know why or is the sport a H.O.S

    If you try resetting your motorola car kit ( i dont know how) then pair your phone again this should work. also in your phone bluetooth settings see if you can change the motorola kit to automatically authuorise connections. It sound like the kit is still looking for your 6230i which needs to be deleted.
    Danny b
    Nokia Accredited Installer
    If my answers help you, give me a Kudos. Its like a pat on the back.

  • Having trouble using my 9720 connecting to car hands free kit

    Hi, i am utterly frustrated with my company blackberry 9720 phone. The trouble i am having is with the car hands free kit, my skoda superb uses the bluetooth premium and cannot use the normal hands free setting like with my Iphone. The problem i am having is firstly connecting, i can only use the bluetooth premuim, which completly changes all the setting on the phone i.e turns the network off on the phone and then a screen pops up saying running SAP mode (must use an ittenna in car?), which in turn stops emails from coming in, i can stupidly write texts messages on my dash board and receive them and read them on my dash board while driving. So when i remove the keys from the ignition the phone does not put the phone back to its normal working settings, it keeps the network switched off i have to go to settings and turn the network on. Thirdly when i turn the car on the phone will not connect automatically it says cannot connect to mobile, but if i switch the phone off and on it automatically connects, but if by the grace of god it does connect an second time the phone crashes and resets and then connects five minutes later after reseting. forthly this is not an phone issue it is definatly software as i have been given an second 9720 and the fault is present on both phones.
    can anyone help

    as I believe it a car bluetooth hands free can only be paired to one device . ie if you wish to pair with another device you would have to reset back to default and search again.... so does the cuve work if you reset the bury and pair again but then your other phone does not work with it ... this is logical as if we drove down a motorway we would pick up loadsa phones.... therefor we can only pair to one device

  • Hi,  Have an iPhone4  Just got roadster2 . more geared to Android anyone know of bluetooth hands free speaker for car most compatible for iPHone 4?

    Hi,
    I have an iPhone 4. Bought a Motorola Roadster2 but really geared to Android.
    Will return it. Can anyone help with a reccommendation for a Bluetooth Hands Free
    Speaker for car  that is most compatible with the iPhone/IOS.
    Thanks

    OK, in Australia, the best options I have found so far are:
    Powere cradle - http://www.holdmyphone.net/select-your-device.html?ddlBrands=Ford&ddlModels=Terr itory-04_09&ddlsubaccessories=0&ddlaccessories=0&hselect=Phone&hselect2=Apple&hs elect3=iPhone-3G
    BT carkit with Stereo integration - http://www.ow.com.au/shop/Car-Kits-Bluetooth/Parrot-CK3000-Evolution-Advanced-Bl uetooth-Car-Kit
    These are very simple to use and I havent had any issues after 12 months usage.
    Parrott have quite a few advanced products which are very good.

  • UC560 hands free speaker

    We are gonna implement a new UC560 in our school.  We‘ve bought a uc560 and SPA502G. We are used to  "hands free speaker function" in present
    Basically it just calls others without answering the phone when someone is not close to it.
    I learnt from this community there are intercom functions most close to the solution.But when I try to config I found that SPA502G has only 1 button definition and cann't be assigned with extra button of intercom.
    Does someone know is it hopeless to meet this need?
    Thanks

    Hi,
    you can use the auto-answer function. But I'm not sure if it only connect to an headset and not to the speaker, just give it a try.
    ephone-dn 1
    number 100
    ephone 1
    button 1:1
    headset auto-answer line 1
    And then you need to press the headset button once on the ephone.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeanswr.html
    Please rate helpful posts.

  • HT204387 Can't find my car hands-free kit

    Hi, With iphone 5 I can't find my cars hands-free kit when searching bloutooth, but I can find it and pair it easily with my iPhone 3GS. My car is Cadillac SRX 2012

    Try unpairing the iPhone 3GS from your Cadillac, then try pairing the iPhone 5 again.
    You can find more troubleshooting info in this Apple doc -> iOS: Troubleshooting car stereo connections
    Also, iOS 6 uses AVRCP 1.4 so you may need to update the reciever in the car to make it compatible with with all versions of ACRCP.

  • Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

    Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

    If the Belkin supports the A2DP (Stereo Bluetooth) profile then it will work.

  • HT204387 how to use synched phone in a car hands free

    Hi,
    I can't use my 4S phone in my car hands free, it is synched but when I actually talk on phone I have to use the phone in my ear, somehow my setting is changed and I can't get to use the phone hands free, the bluetooth is on, don't know what else to to.

    That would be interesting to see an app that's able to do all this and be able to have a keypad to dial a number.  Alot of consumers see the iPad as a replacement stereo, if you really look at the features and price between haveing a high-end double din stereo with GPS vs. an iPad/Mini.  The high-end stereo w/gps,bluetooth,usb for media storage and all the bells & whistles will cost you well over $1000;  As for the iPad.... the iPad already does most of the features that a car stereo can do and alot more, with the exeption of not being able to make a bluetooth calls, but with a price well under $1000 depending on storage space.  I have seen that the iPad,& iPad mini has made an impact in the caraudio scene ever since the very first iPad was released. If seeing is believing.... I would suggest to do a search on the web and youtube "ipad in car".

  • Not allowing bluetooth connection to car hands free

    Hi
    I have a blackberry curve 8520 and a Bury hands free kit.
    Normally as soon as the car is switched on the Bury comes on and starts searching for the blackberry and finds it immediately over the bluetooth and connects without any trouble.
    Recently it no longer does this. Now I have to stop the Bury auto searching, turn off the blackberry bluetooth and then turn it back on for the bluetooth to connect.
    If I allow for the Bury to keep searching you can see in the wireless networks screen that if briefly connects for a second and then disconnects and continues to do this.
    I have restored the Bury to factory reset and it is not the Bury device because my Blackberry Pearl connects fine without any problem, it is my other phone that won't connect.
    I have deleted it out of devices, played around with encryption settings and tried every setting I can see.
    What is going on? why is my curve not allowing a connection to be made? I don't understand what can have happened for it to suddenly not work.
    Any help would be great.
    Thanks

    as I believe it a car bluetooth hands free can only be paired to one device . ie if you wish to pair with another device you would have to reset back to default and search again.... so does the cuve work if you reset the bury and pair again but then your other phone does not work with it ... this is logical as if we drove down a motorway we would pick up loadsa phones.... therefor we can only pair to one device

  • Anyone having problems connecting their Hands Free Blue Tooth in their car?

    My new 4s will not connect to the hands free BT in my 2010 Infiniti G37.  My old 3Gs had no problem connecting.  When I try to hook my new phone up the car doesn't even recognize an available phone.

    How do you figure that?
    Companies are turning them off.
    your cell phone provider would prefer you use a wifi hotspot than their cellular network
    True, but "Borders Books" and other private businesses are not there to help cell phone providers. Cell phone providers would prefer I use the phone in my hotel room also, but no one does that either.
    towers which no one wants in their area.
    Everyone I know wants more cell towers.
    You will see in the coming years, there will be a very big push towards Wifi all over the country.
    Who is pushing? I get the web on my iPhone. With 4G the speed is the same as Wifi.

  • Nokia 6230 car hands free ACI question

    hello there,
    I was trying to connect my nokia 6230 to the car's audio AUX input in order to be able to listen to MP3.
    I have a very good knowkedge in Electronics, so i did some changes in the hands-free car kit.
    question is : I noticed that when the car kit is connected to the phone (& the car icon appears), the audio output becomes MONO, which means I can't really enjoy stereo MP3 (with my change I bypasssed the car kit's speaker output with relay only when call is active).
    the audio out pins of the pop port are at pins 11-14.
    BUT - again - when car kit is attached, output pins 13-14 are inactive (only mono from pins 11-12 is available)
    does anyone know how to hack this further more so it becomes stereo ? (I guess it is something with the ACI protocol ?? (pin 3))
    thanks,
    TOM

    The phone is only seeing your "modification" as the basic the mono headset. It needs to recognise the ACI chip in the headset, that tells the phone whats plugged in and therefore what audio paths to turn on. Unless you can mimic the ACI info (copywright infringement so be aware)the phone wont open the second audio path.Message Edited by megadodo on 06-Sep-200704:16 PM

  • Problems with ios5 connecting to hands free bt parrot 3100

    Since upgrading my iPhone 4 to ios5.01 I have major problems to connect to my cars Parrot 3100 BT hands free set.
    I have already updated my Parrot set to the latest firmware no. 5.
    Nothing helps!!!!
    Looking for solutions ??!!
    Thanks
    Amir

    Try turning Smart Setup off.
    http://bt.custhelp.com/app/answers/detail/a_id/44328/~/switching-smart-setup-on-and-off-on-the-bt-ho...
    Also try separating the SSIDs.
    http://bt.custhelp.com/app/answers/detail/a_id/44798/related/1
    Devices where there are known to be problems include:
    Some Apple devices including iPhone 5 and Apple TV
    some Android smartphones
    Xbox<
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Bluetooth connectibility for hands-free headset

    With the introduction of iOS 4.3, is it possible to connect a bluetooth headset with either the iPad1 or iPad2?

    The following page that list the BT profiles has not been revised. The Users Guide for iOS 4.3/iPad 2 reference that article. However, you can now tether an iPad (w/iOS 4.3) to a iPhone to get an internet connection (if you have the tethering plan for the phone) and that is not discussed in the article.
    BT article:
    http://support.apple.com/kb/HT3647
    Tethering:
    http://support.apple.com/kb/HT3574
    Some users have reported that they have gotten a BT headset to pair with an iPad. Most headsets use the Hands Free Profile which the iPad does not support. You need one with the A2DP profile.

  • Battery condition with in car hands free

    My iPod touch 2nd Gen has spent most of its life plugged into my Parrot hands free kit in my car, now Ive disconnected it, it seems the battery only lasts a few hours.
    Does anyone know if the iPod will automatically bypass the battery when fully charged, ie, keeping the battery in peak condition.

    For maximum battery life Apple recommends:
    "Use iPod Regularly
    For proper maintenance of a lithium-based battery, it’s important to keep the electrons in it moving occasionally. Be sure to go through at least one charge cycle per month. If you use your iPod infrequently (gasp), you might want to add a reminder to your calendar program."
    Thus, it appears you have not done that and thus the battery life would be shortened. I conclude that what you see is not unexpected.
    Apple iPod Battery article:
    http://www.apple.com/batteries/ipods.html

  • I can not pair my I phone to my car hands free

    I can not pair my iPhone with my hands free to work

    Just make sure you're not paired to anything at the time and open the bluetooth settings, you should see a message that your phone is in discovery mode, at least in iOS6

Maybe you are looking for

  • AuthenticateUser exception on Oracle login page

    Hi, When I am running Login Page in R12 from my JDEV it is opening correctly but when Ii give user name and password it is throwing the error that "Resource/AuthenticateUser" is failed. Error message : oracle.apps.fnd.framework.OAException: java.lang

  • V$system_event, timeouts and row lock contention

    Hello everyone, What is the meaning of the total_timeouts column in the v$system_event view if it is related to the event "enq: TX - row lock contention"? How can we have a timeout since "query timeout" is a non existent concept on Oracle? Maybe I am

  • Is there any possibility to create ABAP Webdyn pro application in SAP 4.6C

    HI All, My client is in SAP 4.6C version want's to devlop some SAP ABAP webdyn pro application for their end user requirement. Is it possible to do so if yes how ,they are ready to buy the required H/W and S/W component for the same,but they can't up

  • Server Exchange 2013 SP1 installation on Hyper-V server

    Dear colleges, I seek your help with ExchangeServer 2013 installation on a Hyper-V server issue I've been having. Getting below errors during prerequisites check of XCHG SVR installation. Installation is done on a Hyper-V server. This server is membe

  • I need help with an assignment

    I have several issues. I am doing a project for a class and I'm stuck. the message doesn't appear in the textbox.  That's the only problem with this code so far. Next thing I haven't been able to figure out is  that I need to add two "do", "do while"