6680 remote server access over HTTPS

I recently bought 6680 but I cannot connect to remote servers over https, I have IM+ but its not connecting, can anyone help me? and tell me what is the problem? All the settings on phone are ok.Message Edited by karim on 05-Dec-2005
01:49 PM

i think this has nothing to do with the thread.
what is it you are tring to do? whjat network are you on? what error messages are you getting? what application are you using?

Similar Messages

Acquiring remote server access

I have recently switched to Mac and need to setup a remote login to one of my PC based servers. In the past on PC I have used Remote Desktop Control. Is there a similar app for Mac and please give me as many details as possible.
KK

Sure EW, That's precisely what VNC DOES (and others... but..):
They give you complete control of the target computer... you can 'VNC in', start a long process running, drop the VNC link and it'll all keep happening, 'drop in' to check from time to time... etc.
{You can even run VNC on the 'slave'. I did this once with a client PC & Mac Network 600 miles away - ran VNC To his A, started VNC ON A and controlled B, started VNC ON B and controlled C, then from C to D, D to E and so on... up to about 6 computers (jest for fun If yr a masochist you can also start VNC ON A and control B, then start VNC ON B and control A.... but you'll find that the ensuing loop rapidly fills both screens with new updating Windows and presumably will do so until you run out of memory or similar and crash. I don't know, I've always simply closed the A connection after about 20 windows. I was VERY impressed with the 'sturdiness' of the implementation (Chicken of the VNC)}
Just grab Chicken (Squark!!) and give it a whirl - it's very easy. (got to remember firewalls, routers, security stuff, of course and allow access. Test it 'locally' and don't bother with the ssh stuff.
best of luck.

[solved] Owncloud over SSL: http works, but over https only apache

Hello,
I try to setup owncloud with SSL.
Accessing over http works, but over https, I reach the default apache page instead of the owncloud page.
(I set up SSL according to https://wiki.archlinux.org/index.php/LAMP#SSL )
How could I make the owncloud site available over https?
relevant files:
owncloud.conf:
<IfModule mod_alias.c>
Alias /owncloud /usr/share/webapps/owncloud/
</IfModule>
<Directory /usr/share/webapps/owncloud/>
Options FollowSymlinks
Require all granted
php_admin_value open_basedir "/srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/owncloud/:/etc/webapps/owncloud/:/mt/daten/owncloud/"
</Directory>
<VirtualHost *:80>
ServerAdmin [email protected]
DocumentRoot /usr/share/webapps/owncloud
ServerName http://example.com/owncloud
</VirtualHost>
I tried to change 80 to 443, but then, systemctl restart httpd didn't work. (apache failed)
httpd.conf:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/etc/httpd"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
<IfModule mod_ssl.c>
Listen 443
</IfModule>
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
#LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#own additions:
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
Options FollowSymLinks
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Include owncloud
Include /etc/httpd/conf/extra/owncloud.conf
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
thanks!
Last edited by Carl Karl (2014-05-06 07:40:53)

OK, solved.
What I made wrong:
https://localhost leads to the apache page
https://localhost/owncloud leads to the owncloud page.
(Just as an information if there are other apache noobs like me...)

Simple RMI over HTTP in MIDP1.0 - open source project

Hi All,
For anyone interested in doing remote method calls (over HTTP) to a server from a MIDP 1.0 MIDlet there is an open source project now available for this. Please see MeRMI (Micro Edition RMI) at:
http://mermi.dev.java.net
You can use this to create a remote server class, much like you would in RMI. MeRMI then generates classes to do the remote communications for you. So you can just make nice, simple Java calls from your MIDlet, without having to worry about how the calls are passed to the server, etc. It's all pretty easy to use (especially if you have used RMI before) and takes a lot of the hard work out of building network applications.
The toolkit is completely free (LGPL) and open source, you can use the code and do what you want with it.
Hope it comes in useful to someone!
zonski.
Note: MeRMI does not support callbacks, but an event mechanism using blocking, polling requests can be used to create server to client messaging.

It sounds interesting. It is only for MIDP 1.0?, what about MIDP 2.0?

Can I install WSUS alongside Windows Essentials Experience Role without killing IIS & Remote web access?

Can I install WSUS alongside Windows Essentials Experience Role without killing IIS & Remote web access?
I have recently installed Windows Server 2012 Essentials R2, but I want to use WSUS on the same server. Is this possible, if so how? Last time I tried this I lost my Remote Web Access.
I did post this in the Windows server 2012 essentials thread but didn't get any replies so thought I'd try posting it here to see if I got any hits here?
Is there a way to get WSUS to install to different web ports i.e. 880 & 8443? Or can I get it to install in a new site in IIS? Its just I know that the Essentials Experience role sets up RWA in IIS and installing the WSUS on top just overwrites
the RWA site & settings? I assume this is also why Remote Desktop Services does the same?
Thanks
JK MCP

Can I install WSUS alongside Windows Essentials Experience Role without killing IIS & Remote web access?
http://blogs.technet.com/b/sbs/archive/2013/06/25/how-to-install-wsus-3-0-sp2-on-windows-server-2012-essentials.aspx
Last time I tried this I lost my Remote Web Access.
Remote Web Access uses the Default Web Site. If you install WSUS to the Default Web Site, it will break things. Install WSUS to the alternate "WSUS Administration" site on port 8530.
Is there a way to get WSUS to install to different web ports i.e. 880 & 8443?
No.
Or can I get it to install in a new site in IIS?
Just select the option during the installer to do that.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

ACC Setup Error - Remote Server not Responding in the Proper Manner - Windows 7 Pro

Hello -
I was able to install the CC upgrades to all my software on my laptop without issue. Whenever I try to upgrade them on my desktop I recieve the attached error. I am running Windows 7 Professional. My guess this is being caused my my company's firewall however my IT director claims he set me up to bypass the firewall when trying to install this.
Thank you for your help.

Hi Mike603,
Please refer to the following help document on error " Remote Server not responding".
http://helpx.adobe.com/creative-suite/kb/remote-server-responding-installing-aam.html
Hope this helps.
Please let me know in case of any problem.
Regards,
Sumit Singh

Error starting remote server w. nodemanager

All,
Here is the error I am getting trying to start the remote server using nodemanager.
http://172.24.0.81:8001 (admin)
SATEST server does not exits on the remote server. Thank you for your help, appricate it. Let me know if you need further information.
ERROR----
<Sep 22, 2008 4:46:20 PM> <Info> <NodeManager> <Starting WebLogic server with command line: /opt/bea/jrockit90_150_06/jre/bin/java -Dweblogic.Name=SATEST2 -Dj
ava.security.policy=/opt/bea/wlserver_10.0/server/lib/weblogic.policy -Dweblogic.management.server=http://172.24.0.81:8001 -Djava.library.path=/opt/bea/jrocki
t90_150_06/jre/lib/i386/jrockit:/opt/bea/jrockit90_150_06/jre/lib/i386:/opt/bea/jrockit90_150_06/jre/../lib/i386::/opt/bea/wlserver_10.0/server/native/linux/i
686:/opt/bea/wlserver_10.0/server/native/linux/i686/oci920_8 -Djava.class.path=/opt/bea/patch_wls1000/profiles/default/sys_manifest_classpath/weblogic_patch.j
ar:/opt/bea/jrockit90_150_06/lib/tools.jar:/opt/bea/wlserver_10.0/server/lib/weblogic_sp.jar:/opt/bea/wlserver_10.0/server/lib/weblogic.jar:/opt/bea/modules/f
eatures/weblogic.server.modules_10.0.0.0.jar:/opt/bea/modules/features/com.bea.cie.common-plugin.launch_2.1.0.0.jar:/opt/bea/wlserver_10.0/server/lib/webservi
ces.jar:/opt/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/opt/bea/modules/net.sf.antcontrib_1.0b2.0/lib/ant-contrib.jar::/opt/bea -Dweblogic.system.BootI
dentityFile=/opt/bea/user_projects/domains/qa_domain/servers/SATEST2/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.se
curity.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false weblogic.Server >
<Sep 22, 2008 4:46:20 PM> <Info> <NodeManager> <Working directory is "/opt/bea/user_projects/domains/qa_domain">
<Sep 22, 2008 4:46:20 PM> <Info> <NodeManager> <Server output log file is "/opt/bea/user_projects/domains/qa_domain/servers/SATEST2/logs/SATEST2.out">
<Sep 22, 2008 4:46:21 PM EDT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
/opt/bea/wlserver_10.0/platform/lib/p13n/p13n-schemas.jar:/opt/bea/wlserver_10.0/platform/lib/p13n/p13n_common.jar:/opt/bea/wlserver_10.0/platform/lib/p13n/p1
3n_system.jar:/opt/bea/wlserver_10.0/platform/lib/wlp/netuix_common.jar:/opt/bea/wlserver_10.0/platform/lib/wlp/netuix_schemas.jar:/opt/bea/wlserver_10.0/plat
form/lib/wlp/netuix_system.jar:/opt/bea/wlserver_10.0/platform/lib/wlp/wsrp-client.jar:/opt/bea/wlserver_10.0/platform/lib/wlp/wsrp-common.jar>
<Sep 22, 2008 4:46:22 PM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R26.4.0-63_CR302700-72606-1.5.0_06-20
061127-1104-linux-ia32 from BEA Systems, Inc.>
<Sep 22, 2008 4:46:24 PM EDT> <Critical> <Security> <BEA-090518> <Could not decrypt the username attribute value of {3DES}/Q0Ui/e8S9ILKA67csL+8g== from the fi
le /opt/bea/user_projects/domains/qa_domain/servers/SATEST2/data/nodemanager/boot.properties. If you have copied an encrypted attribute from boot.properties f
rom another domain into /opt/bea/user_projects/domains/qa_domain/servers/SATEST2/data/nodemanager/boot.properties, change the encrypted attribute to its clear
text value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the s
erver. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceExcept
ion: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte..>
<Sep 22, 2008 4:46:24 PM EDT> <Critical> <Security> <BEA-090518> <Could not decrypt the password attribute value of {3DES}/Q0Ui/e8S9ILKA67csL+8g== from the fi
le /opt/bea/user_projects/domains/qa_domain/servers/SATEST2/data/nodemanager/boot.properties. If you have copied an encrypted attribute from boot.properties f
rom another domain into /opt/bea/user_projects/domains/qa_domain/servers/SATEST2/data/nodemanager/boot.properties, change the encrypted attribute to its clear
text value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the s
erver. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceExcept
ion: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte..>
Enter username to boot WebLogic server:<Sep 22, 2008 4:46:24 PM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.0 Wed May 9 18:10:27 EDT 2
007 933139 >
<Sep 22, 2008 4:46:26 PM EDT> <Info> <Management> <BEA-141223> <The server name SATEST2 specified with -Dweblogic.Name does not exist. The configuration inclu
des the following servers {AdminServer}.>
<Sep 22, 2008 4:46:26 PM EDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: [Management:141223]The server name SATEST2 specified with -Dweblogic.Name does not exist. The configuration includes
the following servers {AdminServer}.
at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:148)
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:38)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:378)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:125)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:647)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:419)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:377)
at weblogic.Server.main(Server.java:67)
>
<Sep 22, 2008 4:46:26 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Sep 22, 2008 4:46:26 PM EDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Sep 22, 2008 4:46:26 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
<Sep 22, 2008 4:46:27 PM> <Debug> <NodeManager> <Waiting for the process to die: 7590>
<Sep 22, 2008 4:46:27 PM> <Info> <NodeManager> <Server failed during startup so will not be restarted>
<Sep 22, 2008 4:46:27 PM> <Debug> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>

Thanks. I just reinstall the software and did not have issue. Maybe the issue was caused since I was trying to configure Weblogic running on Window 2003 as admin server and Linux as my remote server.
Here is how I got it to work. I reinstalled software on the Linux box and used Linux box as my primary server with admin console running on that and window 2003 as my remote node.
Thanks for you help. I appreciate it

Safari will not play mp4 over HTTPS

Hello,
I have a file, sample.html, which contains only the following code:
<html> <body>
<video width="600" autoplay loop poster="placeholder.jpg">
<source src="sample.mp4" />
</video>
</body> </html>
The mp4 file referenced is the one downloaded from here: http://support.apple.com/kb/HT1425
When I use Safari to access my page via http://myserver.com/sample.html the video plays without problem.
When I use Safari to access my page via https://myserver.com/sample.html only the placeholder image is displayed.
Using Safari 7.0.6 on Mac OS X 10.9.4
I have used http://www.sslshopper.com/ssl-checker.html to check that SSL is correctly configured for my domain and it reports no problems.
How can I make the video play in Safari when accessed over https?
Thanks in advance,
Andy

If you are having problems playing MPEG4 video in Quicktime 7.4 (and Apple are aware that some users have had such problems) you should carefully check in
/Library/Quicktime and
/Library/Internet Plug-ins and
Home/Library/Quicktime
to check whether you have any third party plug-ins that are not completely up to date.
Current versions of Flip4Mac and DiVX and Perian do NOT cause failure alone or in combination. However the one SPECIFIC extension that ALWAYS causes the failure alone or in groups is 3ivxMediaImp. All other 3ivx extensions DO work. Remove only that ONE SPECIFIC extension.
Please try this and see if it fixes your problem with QT Player, the QT Firefox Plugin, and iTunes not playing MPEG4 files (including mp4 files).
Older 3ivx and DivX components are often incompatible with new QuickTime versions and are, in many cases, obviated by component packs like Perian.
This is not the only explanation for issues with MPEG4 file playback in QuickTime 7.4 and later, however. The issue with videos from democracynow.org and others, for instance, is the result of that content not complying with MPEG4 standards (namely that they use bogus track dimensions). QuickTime had previously ignored invalid track dimensions but this was changed in order to support properly authored anamorphic content.
The recent update to QT 7.4.1 has fixed a number of issues but some problems are unavoidable when working with non-standards compliant content. The standards are important for many reasons including keeping hackers from manipulating improperly coded web pages.
However, there is a workaround (also the basis for why those files will still play in iTunes): there are a few ways to trick QuickTime into ignoring the invalid track data. For instance, rename the files .3GP and they'll show up just fine.
Post back if you want a list of the plug-ins you should have in order to play pretty much anything in Quicktime.

Windows Home Server 2011, How to Turn off Remote Web Access for Dashboard completely?

I have a Dell Server at my House and i thought it would be a good idea to use it to run a website on so, i set up Apache and get it installed. But then every time I type http://localhost/ it would always Come up with the remote web access! So i thought
ok no problem you can disable that in Dashboard. Well i was wrong when i typed http://loacalhost/ it came up with the Proceed Anyways option but sent me to a Big
Bad GateWay. So what im trying to get at is i need to Fully Disbale that Remote Web access or Set a specific Port so it does not interfere with port 80. So does any one know how to fix this or get rid of this issue?

This one may help.
http://technet.microsoft.com/en-us/library/remote-access-overview.aspx
I'd ask them more over here.
http://social.microsoft.com/Forums/en-us/home?forum=whs2011
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Ftp and http access over XDB repository is not allowed...

When I try to execute the following command on a reasonably fresh Oracle 11 installation:
insert into "XMLTEST" ( "name", "xmlfof" ) values ( 'small', DBMS_XDB.GETCONTENTXMLTYPE('/public/small.xml') );
-- The schema is correctly registered, the file "small.xml" is in the /public repository folder, the user has every conceivable role and priviledge
-- http access works fine from a remote location, tried to execute the command on the server and from remote system...
I get the following error message:
ORA-31020: Der Vorgang ist nicht zulässig, Ursache: For security reasons, ftp and http access over XDB repository is not allowed on server side ORA-06512: in "XDB.DBMS_XDB", Zeile 1915
Searching for an answer on the forum didn't produce any concreate explanation... Does anyone have any idea how to solve this problem?

As it turns out, the XML file contained a reference to a DTD at an external web-site, which caused the problem - it was identical to that described here:
Re: ORA-31020 when using XML with external DTD or entities
After removing the reference, everything works perfectly...

Problems setting up Remote Web Access in Windows Storage Server 2008 R2

We just bought a WD Sentinel DX4000 Storage Server and went through the Remote Web Access wizard. It setup the router just fine but when we got to the setup your domain name we have been having
headaches ever since. We chose the option to use our own domain name, which we have registered through GoDaddy. It then showed that yes, our provider was GoDaddy but then it told us we needed to update our service with GoDaddy so we clicked the
"Go to GoDaddy.com" button and it sent us to a page to purchase an SSL certificate. So, we did that but then had issues with it not being able to be managed in our GoDaddy account. So, I went into the domain name with GoDaddy and purchased
a certificate there and got it setup on the domain name with GoDaddy.
The problem is that when I try to go through the wizard again to set up the domain name I still have to click the goDaddy button to move to the next page where I type my domain name, username, and password
with GoDaddy. I setup the remote extension in the A records with GoDaddy as remote.mydomain.com, and put in my username and password with GoDaddy. After I click next it tries to connect to the domain name service provider but then gives me the
following error message over and over:
The domain name was not set up for your server. Wait a few minutes and run the wizard again.
An unexpected or unknown problem occurred. Please wait a few minutes, and then try again.
Well, I have tried this several times and am about to start pulling my hair out. Can anyone please tell me what I may be doing wrong?
Thanks for any help you may be able to provide.

Hi,
Please verify the installed certificate status, you could refer to the article below to install GoDaddy SLL Certificates.
Installing a GoDaddy Standard SSL Certificate on SBS 2008
http://sbs.seandaniel.com/2009/02/installing-godaddy-standard-ssl.html
Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
There is a similar thread, please go through it to help troubleshoot this issue:
SBS Essentials 2011 Domain Name Wizard Fails
https://social.technet.microsoft.com/Forums/en-US/6644ec25-3071-4526-b878-9d6977589f88/sbs-essentials-2011-domain-name-wizard-fails?forum=smallbusinessserver2011essentials
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

500 Internal server error on RPC over HTTP using TS Gateway

I've been happily using TS Gateway on Windows Server 2008 x64 for 18 months and everything was working perfectly. Suddenly this week it started giving "access denied" errors to any user who tried to connect, evidenced in event viewer as a failed login attempt.
After restarting the server, it got worse in that if I browse to the /rpc folder it gives me 500 Internal server error and I don't even get as far as authenticating credentials. I've tried removing IIS, RPC over HTTP and TS Gateway, and re-adding all of them,
but I still get the same error 500. The RPC and TS Gateway services are both running. What could be causing this and how can I fix it?

Hi,
Thanks for your post.
Firstly, check the following KB article to troubleshoot this issue.
This computer can't connect to the remote computer because the Terminal Services Gateway server is temporarily unavailable
http://support.microsoft.com/default.aspx?scid=kb;EN-US;969743
If the issue still persists, you may perform the below steps:
Uninstalled TSGateway, IIS role, all IIS related components.
Delete all files in the folder %windir%\system32\inetsrv\config
Delete all files in the folder %windir%\system32\inetsrv\metaback
Restart the server and try to re-install TSGateway again
Best Regards,
Aiden
Aiden Cao
TechNet Community Support
Thank you very much for this. I confirm it fixed the problem, although there was an error in reinstalling IIS and TS Gateway until I also removed Windows Process Activation Service.

Is it possible to access the http web interface over the fa1 management interface?

Hello All,
    I am remotely connected into a Cat 4500 + Supervisor V module via console cable and point to point connection from laptop to fa1 management interface on SupV. SupV module is running IOS 15.0(2)SG8.
    I am not able to physically change the patch cable from fa1 management interface to gi2/3 or any other switch port for a couple days and would like to see if it is possible to access the http server through this fa1 port since I am working remotely. I can ping the laptop from fa1 and tftp ok but cannot access the http/https server. Is this even possible without connecting the laptop into a regular switch port like gi 2/3 gi 2/4 etc..? The reason I ask is I would like to use Cisco Networking Assistant gui for some things but need access to https server first over the fa1 link.
Any suggestions would be much appreciated.
Thanks!
-S

Here is the ACL list. I have not made any entries into this list and all of these are default at this time. Do I need to make an explicit allow ACL for http?
Thanks!
-S
#show access-list
Extended IP access list system-cpp-all-routers-on-subnet
    10 permit ip any host 224.0.0.2
Extended IP access list system-cpp-all-systems-on-subnet
    10 permit ip any host 224.0.0.1
Extended IP access list system-cpp-dhcp-cs
    10 permit udp any eq bootpc any eq bootps
Extended IP access list system-cpp-dhcp-sc
    10 permit udp any eq bootps any eq bootpc
Extended IP access list system-cpp-dhcp-ss
    10 permit udp any eq bootps any eq bootps
Extended IP access list system-cpp-energywise-disc
    10 permit udp any eq any eq 0
Extended IP access list system-cpp-hsrpv2
    10 permit udp any host 224.0.0.102
Extended IP access list system-cpp-igmp
    10 permit igmp any 224.0.0.0 31.255.255.255
Extended IP access list system-cpp-ip-mcast-linklocal
    10 permit ip any 224.0.0.0 0.0.0.255
Extended IP access list system-cpp-ospf
    10 permit ospf any 224.0.0.0 0.0.0.255
Extended IP access list system-cpp-pim
    10 permit pim any 224.0.0.0 0.0.0.255
Extended IP access list system-cpp-ripv2
    10 permit ip any host 224.0.0.9
Extended MAC access list system-cpp-bpdu-range
    permit any 0180.c200.0000 0000.0000.000c
Extended MAC access list system-cpp-cdp
    permit any host 0100.0ccc.cccc
Extended MAC access list system-cpp-cgmp
    permit any host 0100.0cdd.dddd
Extended MAC access list system-cpp-dot1x
    permit any host 0180.c200.0003
Extended MAC access list system-cpp-lldp
    permit any host 0180.c200.000e
Extended MAC access list system-cpp-mcast-cfm
    permit any 0180.c200.0030 0000.0000.000f
Extended MAC access list system-cpp-pppoe-disc
    permit any any protocol-family pppoe-disc
Extended MAC access list system-cpp-sstp
    permit any host 0100.0ccc.cccd
Extended MAC access list system-cpp-ucast-cfm
    permit any host 000d.6558.d5fd

Remoting over HTTPS

Is it even possible to use RemoteObjects over SSL?
I am attempting to access a remote server (not my localhost
as all the tutorials assume). It absolutely, positively, must use
SSL.
The .NET developer creating the back-end has installed WebOrb
to allow AMF - however, it's still not working.
Can someone please point me toward a tutorial that actually
works? Or can you tell me if what we are attempting is even
possible?

Kindly check the action tag of your form. It can have the following 2 to operate correctly: -
1. action = "/page.jsp";
2. action="https://mysite:443/page.jsp";
Check for https carefully if you are using 2nd option. This could be the probable reason that the following error, as mentioned by you: -
When submiting I get a message box "that I'll be redirect over a non secure conection" and my jsp url look someting like this:
http://mysite:443/page.jsp.
I suppose you are using some public key encryption for communicatiing using SSL. It is generally achieved using self signed certificate or 3rd party certificated from some trusted certification authority. Most of the java web servers provide you options to generate a self signed certificate.
The second error comes since the page has been redirected to HTTP but the port is 443, which by default is where HTTPS listens. Since the port 443 listens for HTTPS requests it is giving the following error: -
"Your browser sent a request that this server could not understand.Reason: You're speaking plain HTTP to an SSL-enabled server port.Instead use the HTTPS scheme to access this URL, please."
So the second error is the consequence of the first error.
Hope this helps

DW Procedures to connect to MS ACCESS database located on remote server

I am confused about the procedures within Dreamweaver CS3 to connect to a MS ACCESS database on a remoter server.
I am working through a tutorial book, "Dreamweaver 8 with ASP, Cold Fusion and PHP Training from the Source", but the instructions are unclear concerning the procedures to connect to a MS ACCESS database located on a remote server.
The book indicates that the server administration has to create the DSN for you and screen shots indicate that you will result in a list of DSNs to choose from when creating the connections .asp file.
I went through the procedures to create a connections .asp and resulting in a connection without and tables (of course) because I do not initially have any connection information from my remote site.
I have generated the required two lines of code as follows for my MS ACCESS database connection on my remote server:
'Database connection info and provider
strCon="Provider=Microsoft.Jet.OLEDB.4.0;Data Source="&_
Server.MapPath("database\trans.mdb") & ";" &_
"User ID=xxx;Password=xxxxx"
The question that I have is:
How does this connection coding relate to the "connections/conn_newland.asp" file that was create within the Dreamweaver screens? How do I merge the ASP coding? The file (/connections/conn_newland.asp) generated within Dreamweaver is as follows:
<%
'FileName="Connection_odbc_conn_dsn.htm"
'Type="ADO"
'DesignationType="ADO"
'HTTP="true"
'Catelog=" "
'Schema
Dim MM_conn_newland_STRING
MM_conn_newland_STRINT = "dsn=newland;"
%>
Any advice would be appreciated. I know that this is simple but debugging an error from an ASP coding merge would be a "bear" to debug!

I have not used MS Access myself (fortunately) but I believe it works much like the old, old way of achieving a multi-user database in FileMaker.
That is, it is not a true client-server database but more a peer-to-peer database and that each peer opens the same database file which is available to multiple user via file sharing. Therefore as elikness said it should just be a matter of putting the files on your Lion Server and then sharing that folder/volume using SMB sharing.
However one thing to be aware of, since MS Access is not a true client-server database I would imagine it uses record locking to manage simultaneous direct access to records in the same files. File or Record locking is something that has historically been a bit flakey when using Windows clients with a Mac file server (and probably vice versa).
While I am not proposing it as a solution to consider seriously, it is worth you knowing that FileMaker Pro is a database system that is available for both Mac and Windows and depending on how you configure things can be considered to stretch from a configuration very similar to MS Access at the low end all the way to a high-end MS SQL Server style setup at the top end. See http://www.filemaker.com for details.
There is also a a third-party tool available for migrating databases to or from FileMaker Pro and it can convert MS Access databases to FileMaker Pro see http://www.fmpromigrator.com/
You could use FileMaker Pro just on Windows machines if you wish.

6680 remote server access over HTTPS

Similar Messages

Maybe you are looking for