6700: automatic power-off in car

Hello everybody.
I just got a nokia 6700 classic and installed it in a new mercedes E-class cradle (original mercedes handsfree kit).
My problem is, that the phone does not switch off automatically after e.g. 10 minutes after the ignition is turned off (power off in cardle). Instead the phone is running till the power of integrated battery is down.
Is there a chance to configure an automatic power off when no external power is connected (ignition off) ?
Thanx a lot,
Marc 

Not sure, but normally the phone will not turn off when (or after some time delay..) the ignition is turned off... In fact the Cradle (car kit..) turns off when the ignition is turned off or automatically turns off after some time delay when the  phone is removed from it...
--------------------------------------------------​--------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

Similar Messages

  • After update my imac to yosemite automatically power off ifself.pls help

    hi friends , I updated my imac (24-inch,Early 2009) to yosemite and update was ok.after update i restart imac  then it is booting and showing apple log and coming to password page then automatically power off ifself. if i start with safe mode it is working fine. can everyone help me.

    Hi.
    You are running into a problem that many users of the 24-inch, early 2009 iMac 9,1's have encountered (including me).  The Sudden Shutdown Syndrome is the scourge of many iMacs and Mac Book Pros.
    Unfortunately, I believe that the only solution is for Apple/nVidia to revisit their geForce Tesla drivers and figure out if the power management is correct.
    In your case, I'd try this:
    1)  Boot up your computer in safe mode and log into your user account.
    2)  In the Finder menu, select Go > Go to Folder...
    3)  Type: " ~/Library/Caches" (without quotes) into the box and press return.  You will be taken to the Caches folder.
    4)   Select all the files in the folder and move to the trash (do not trash the folder itself).  At this point, just leave them in the trash...don't erase them.
    5)  Go back to the Finder menu, select Go > Go to Folder...
    6)  Type: "/Library/Caches" (without quotes) into the box and press return.
    7)  Do the same thing you did in 4)  This time, though, you will be asked for an administrator's password.
    8)  Restart your computer in normal mode and attempt login.
    9)  If you can log to the desktop, you may delete your trash.
    Hopefully this will get you into your account.  If it doesn't, you may have to do a clean install of Yosemite, go back to Mavericks, or wait for an update.
    Good luck!

  • Automatic power off

    What do I have to do to make my computer automatically power off
    on "init 5" execution.
    I have a system running Solaris 8. Power management is enabled in
    CMOS Setup. I've tryed to install Win 95 and it powers computer off
    successfully but Solaris doesn't.

    Hi,
    thanks for the answer, but it is not that I've asked about.<BR>
    As your may know 'shutdown' is a script. So 'shutdown -i5' warns users, asks for confirmation and then calls 'init 5'. That is I wrote about first time. The problem is that when I use one of the above mentioned commands computer does NOT automatically power off.
    Andrew.

  • Can my USB Drive be configured to power off when the iMac is powered off?

    I am using a Lacie 500GB external USB drive. The drive remains powered on when my iMac is powered off. Is there any way to have the drive automatically power off?

    Hello Jack
    The s.o.p. for shutdown should be to eject the drive, turn it off then shutdown the iMac. The s.o.p for startup should be to startup the iMac then turn on the external HD. Many external HD manufactures do support a sleep function that allows the drive to sleep when the iMac is sleeping.
    Dennis

  • I Cant Power Off My iPhone 4s

    I Cant Power Off My iPhone 4s When I Off It It Turn On Automatically. iPhone 4s Version 8.1.2 . I Restore It But Not Fixed
    SomeTime It Automatically Power Off And Turn On Again After Few Minutes

    If your iOS device restarts, displays the Apple logo, or powers off while you're using it
    Here are the Apple recommended steps - but you may have to bring it in to an Apple store for further hardware troubleshooting

  • Ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

    ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

    Let the battery fully darain. After charging for an least an hour try a reset and restore. Use Recovery mode if necessary.
    If not successful, then time for an appointment at the Genius Bar of an Apple store.

  • Will an iPhone automatically turn off location services.  If it goes below a certain battery power level, and so how you disable this in settings.

    I am working with Georgia DOT and we have created an app to track our state vehicles using IPhone 5. My question is: will an iPhone automatically turn off location services?  If it goes below a certain battery power level, and if so how do you disable this in settings.
    Message was edited by: mickyel

    I don't believe that this will happen, however, the entire iPhone will shut down when the iPhone reaches the auto-shutdown power level. There is no way to turn that Off other that connecting the iPhone to power.

  • My iphone don't have power. I am using a iPhone 5 automatic turn off. Now I press power but it don't turn on. Please help me. Thank you so much

    Dear Apple,
    I am using an iPhone 5. It automatic turn off after that I press power on iphone but it don't turn on power.
    Please help me. Thank you so much.
    <Personal Information Removed by Host>

    Try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. You may need to connect the device to the charger before you attempt the reset.

  • HT201263 I tried to reset my iPhone (3gs) with deleting all data. When it power off and automatically again on then it is showing Apple logo only. Not restore and startup my phone. I tried to charge and not charging. What I should do now?

    I tried to reset my iPhone (3gs) with deleting all data. When it power off and automatically again on then it is showing Apple logo only. Not restore and startup my phone. iPhone alerming low charge and I tried to charge and not charging.
    What I should do now?

    Something has gone wrong. Turn your phone off, then force it into recovery mode:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, select "new".

  • HT1766 automatic backup to icloud what does switched off mean? power off?

    automatic backup says phone should be 'switched off'. does this mean short close at the top or power off?

    I just reviewed HT1766 (the document where you originated your post) and even used the browser search feature but nowhere could I find the words "switched off."
    The only statement I could find was: "Automatically backup your camera roll, accounts, documents, and settings when this iPhone is plugged in, locked, and connected to Wi-Fi."
    The above statement does list the correct requirements for automatic backup. Where are you seeing "switched off"?

  • One day i  was just flipping through my ipod i put it on sleep mode then next time i opened it without me doing anything it gave me an option of ''slide to power off'' i pressed cancel then  it automatically went back to sleep mode it is still happening

    One day i  was just flipping through my ipod i put it on sleep mode then next time i opened it without me doing anything it gave me an option of ''slide to power off'' i pressed cancel then  it automatically went back to sleep mode it is still happening my ipod is jailbroken and i didnt fiddle with the settings.. please help.

    If it is jailbroken, we are not allowed to help you with that here.  You'll need to seek out other sources of help.  The jailbreaking could potentially be part of the problem, for all I know.
    BTW, just a pointer...  punctuation is your friend!  Your post was very difficult to read without any.  Many people will simply stop reading and click the "back" button when encountering something like that, which limits availability of help to you.

  • My iPhone will not power off. It automatically turns back on after trying to shut it off. Any Ideas?

    My iPhone 5 will not power off. I hold the power button down and it lets me turn it off but then it automatically turns back on. It is as if I am just restarting it. Any ideas on how to fix it? I already had it exchanged and the replacement is now doing it.

    I had this same problem about a year ago. It is most likely because debris has been caught in the cable connector. Get a cotton bud or something soft so that you don't cause any damage, and gently clean the inside of the dock connector of your phone. Do not use any liquids. Hope this helps.

  • Weird automatic power shut offs

    Just bought and assembled a KT4V board with an AMD Athlon 1800 with 133mhz fsb, 266mhz ddr Ram, 64mb Geforce 2.  However when it boots up it likes to automatically shut off at points. I don't mea restart I mea I have to turn the power switch i the back off and on and then hit the switch in the front. Beyond the fact it does not eve get past the memory check with the FSB at 133 or for that matter aything over 100 (so it says the processor is only 1150mhz on start up) even with default settings when it gets past the POST it can't seem to read my boot disc in the floppy drive(sayig it can't locate the boot record) although it registers the device at the beginning. Any suggestions to the source of the problem/problems would be much appreciated.

    I experienced the same rebooting issue with the KT4V I set up for a friend recently. It turned out it was the Data Curruption Issue Described in This Thread
    The 1.7 Bios fixed the issue for me - but there are reports that it severly kills HardDrive Performance, but at least the computer is stable...
    Can anyone Confirm that the 1.7 bios does kill harddrive performance? The board is out of my hands now and I didnt test the performance before the new bios update anyway.

  • Hp pavilion pv 6700 booting time off and turn on automatically.view hardware problem

    hp pavilion pv 6700 booting time off and turn on automatically.view hardware problem

    the fan is not working will or the processur part drae

  • Charging iphone4 with an exogear case via 12v to usb car charger, on disconnecting restore is needed unless I power off  iphone?????????????

    Charging iphone4 with an exogear case via 12v to usb car charger, on disconnecting restore is needed unless I power off  iphone?????????????

    Carloyn,
    Thanks for the tip. But when I hooked the iPad to the wall charger (which is a power supply too) using the same USB cable, I was able to turn it off. How come?
    Carolyn Samit wrote:
    Hi,
    As long as the iPad is connected to your computer it has a power supply which prevents you from turning the iPad off. Better to allow the battery to charge to 100% while it's connected regardless.
      Carolyn  

Maybe you are looking for

  • How do i fix my sigmatel audio driver problem?

    I have a Black Macbook Intel Core 2 (circa 2007) Running Windows XP Pro SP3 via Boot Camp v 3.2. I recently had to reinstall Windows XP Pro and only had saved Boot Camp Disks for v1.4 and then upgraded to 3.1 via the Boot Camp 3.2 .EXE downloads avai

  • How to create an extension not in default location in Eclipse?

    Hi everybody, I recently installed an Extension builder 3 on my Eclipse Kepler (on a Mac OS 10.6.8) I just created an extension for InDesign CC (9.2) in my eclipse workspace. This works fine, I can launch InDesign CC and see my extension. I just crea

  • PI 7.0 config in MSCA

    Hi Experts, I will appreciate some examples and insights how a PI 7.0 system should register in the SLD in MSCA environment (two node cluster with central and dialog instance). Especially I am interested to know how entries in the SLD - Technical Sys

  • Need help in Performance tuning

    Hi All,         I am facing some performance issues in my program.  The program taking a hell lot of time to execute and some times timing out without giving the out put.  This is a report program with ALV output.  It is handling mainly Sales related

  • Calendar time is not equal to exchange calendar

    time zones are similar but there is 10 hours difference maybe someone can help me?