6714 init PCI display first problem

I have a MSI 6714 V1 mainboard, that has integrated graphics. Now i want to install a PCI graphics card with TV-out, but no matter how i adjust the BIOS settings, the computer does not want to use the PCI-card. I have tried to disable the onboard graphics card and enable init PCI display first, but it does not work. I have read that others have had the same problem with this mainboard. I have the newest BIOS version and there is nothing wrong with the PCI card. (Powercolor 9200SE PCI).
Any hints?

Quote
Originally posted by Lightyear
I have a MSI 6714 V1 mainboard, that has integrated graphics. Now i want to install a PCI graphics card with TV-out, but no matter how i adjust the BIOS settings, the computer does not want to use the PCI-card. I have tried to disable the onboard graphics card and enable init PCI display first, but it does not work. I have read that others have had the same problem with this mainboard. I have the newest BIOS version and there is nothing wrong with the PCI card. (Powercolor 9200SE PCI).
Any hints?
Well I dont really know... I was just thinking maybe you should read ur manual... Because some motherboards have PCI ports that are previewed for certain PCI cards...
For example: I had a friend.. he couldnt get his soundcard working so then i told him to read his MB manual.. and in the manual it said: "for sound cards use PCI slot 2"... or something like that.... And it worked for him...
I dont know why they do that... I think it has to do with the IRQ's...
As i said.. its just an Idea.. I dont know your motherboard...
sorry
greez Steph
good luck

Similar Messages

Missing "Init display first" on x58a-gd65

Hello. I have X58A-GD65 motherboard with core-i7 on it.
Also I have two videocards -- nvidia gtx460 and gt430. I have two monitors and need both of them to be connected to gtx460 (and gt430 is needed to be headless). Gtx460 is plugged into the second pci-express slot and gt430 is plugged into the first -- it's needed to avoid overheating.
So the problem is that I see post message and bootloader choosing screen only with a monitor connetcted to gt430 and it's unacceptable. If I have both of monitors plugged to gtx460 I see nothing until the OS is loaded (I have both linux and windows).
All of my previous motherboards were based on AMI bios too and they had an option "Init display first" in which I could set the main PCI-E port. But your motherboard for unknown reason is missing that option -- I tried V22.1, 22.2, 22.3 versions (with 22.0 I have memory issues).
What can I do to set init display at the second pci-express?
Thanks in advance.

Quote from: Jack on 19-June-11, 05:05:53
Please note that your motherboard is not "our" motherboard in any meaningful sense. This is a user-to-user forum, not MSI Technical Support.
Excuse for "your board" -- I actually have written to support too and the messages are similar.
Quote from: Jack on 19-June-11, 05:05:53
Mh, none of my motherboards in the last couple of years (must have been 7 or 8 different models) really had an option to specify the exact slot used for video output. The choices were usually: Onboard/IGP, PCI-Express and PCI, never however PCI-E #1, PCI-E #2, PCI-E #3 etc.
Actually I had at least two Gigabyte motherboards that supported that feature. And also there are some clues that there is a version of bios for subj motherboard, because there is such an option in at least one of reviewes on this motherboard (look at the 4th screenshot): http://www.overclockers.ru/lab/38886_2/Obzor_materinskoj_platy_MSI_X58A-GD65.html#4
And also there are messages like this on that problem: http://www.overclock.net/monitors-displays/838532-second-pci-e-primary-display-help.html#post10910073
That means that it must be in that bios, because my previous botherboards with AMI bios onboard also supperted that option.
Quote from: Jack on 19-June-11, 05:05:53
If you really have an over(!)heating problem with a dual-card configuration consisting of a mid-level and a low-level (!) card, then the primary problem I see here is quite insufficiant cooling/case ventilation and I am definately sure that that can be worked out and solved for good with a little bit of effort/problem oriented cooling improvisation.
I was not very accurate (because didn't want to specify unnecessary details). It's not an overheating problem in general sense. I'm actually a CUDA developer and I use gt430 as debugging board with and I need a disabled watchdog for some reasons. And because of the same reason I need both cards to be connected to pci-e@16 because pci-e@4 appeared to be too slow for massive computations (I used that scheme before but now it's the bottleneck). Thus I need to have cards in the 0th and 1th pci-e accordingly. But gtx460 is two-slotted card and if gtx460 is in the 0th slot and gt430 is in the 1th, gt430 blocks exactly the place where the gtx460 fan is situated. So the gtx460 temp increases up to 80C under 100% load. That's not a problem but the fan of gtx460 starts spinning at 3000rpm and it's very annoying. Temperatures of other devices stay below 50C.
But if I put gtx460 in the 1th slot and gt430 in the 0th there is a plenty of space in front of gtx460 and all the temperatures stay below 45C even if both cards and the CPU are all loaded at 100% => no annoying noise and fan spins at 800rpm.
That's the point actually.
Quote from: Jack on 19-June-11, 05:05:53
In any case, for costum BIOS fixes (your problem seems very, very ideosyncratic) you need to contact MSI Technical Support:
I've written them already and waiting for answer. I thought that forum could be more fast (and it appeared to be true:) . And I thought that there may be some means (turning on hidden options in bios for example) that support couldn't tell me about because of some intra-policies

X200's display has problem

Hi all,
I just bought an X200 7454-2JU a couple days ago. I'm wondering that the display has problem which is similar to a wheel on the right hand. I also attact my picture at: http://www.pitini.com/status/x200.jpg
I'm going to call the retailer for an exchange, but I need your advice first.
Thank you.
Kim

Thanks for your post. I'll call the retailer (Newegg) tomorrow. That's so bad.
It was DOA (Dead On Arrival). It is obviously to see it from BIOS to windows backround. I do not think that Lenovo, a famous brand name, could not detect this error before package it.
A giant who wants to become a leader needs to have a QUALIFY first.
Message Edited by Pitini on 07-20-2009 12:43 AM
Message Edited by Pitini on 07-20-2009 12:49 AM

Can one clip in a sequence have "display first field" and another one "display both fields"?

Is it possible that one clip in a sequence will have "display first field" and another one
"display both fields"?
My problem is that I have a split screen. One part is a clip of still
image with text and the text is seen good with "both fields" and a
little bit blurred with "first field". The second part is a PAL clip
and it is seen bad with "both" and good with "first".
The pixel-ratio is 1.094 for both clips. Playback resolution is "full".

I have an Eizo calibrated monitor.
Hooked up how? If in use as the main computer monitor, no this isn't sufficient. You need a real TV or production monitor connected via HDMI, component, S-video or the like, so that it displays only the video signal and no part of the Desktop.
(And if you're working in interlaced, it really needs to be a CRT that can properly display an interlaced signal.)

HP Envy X2 (32-bit) upgrade from windows 8.1 to Windows 10 has a display compatibility problem

When I attempt to install Windows 10 on my machine I get an error screen that say's: "The display manufacturer hasn't made your display compatible with Windows 10." The display manufacturer (which is my HP with Intel(R) Graphic Media Accelerator), has a display compatibility problem with Windows 10. Does anyone know what I can do? I would appreciate a good response! Larry

Actually it's H partition that hp drive encryption is decrypting 5 days now (without % sign). I have only my dropbox data there. I could format that partition and downlad the data from dropbox again (it would take 1 day to download 60 GB of the data again from dropbox). D partition is HP recovery partition but I don't have any problems with it yet (i made a letter mistake in first post). I also made HP recovery media on USB stick. Will hp drive encryption automaticaly update the status of H partition from 'Decrypting' to 'decyrpted', if I format the H: partition? Will drive encyrption login window (WinMagic’s Pre-boot UEFI) (before the windows login) automatically be removed, if I format the H: partition? Will FilterBootOrder (FBO) variable automatically be removed, if I format the H: partition?I imagine this is automaticaly done via decrytion of all partitions/disk in HP client security (which doesn't work correct at my computer). Maybe afterwards the H: partition is formated and HP drive encryption status updated, I can then uninstall hp drive encryption and hp client security and install win10. This is another option.

What is the average price apple repairing IPhone4s Display failure problem?

what is the average price apple repairing IPhone4s Display failure problem?

It depends. If your still within warranty and the display failure isn't your fault you just back up your phone then go to any apple retail store and they'll give you a new one for free. If it is your fault I would still back up your phone and go into the store. Then they'll charge you about £150 and will give you a new one. But you must have your phone backed up. That will be the first thing they ask you.

MBP Display Lines Problem

Hey everyone, I just bought a MBP 15' 2.2Ghz last wednesday and am now seeing a display line problem. I see a green dotted line that extends from the top of the screen to the bottom approximately 2 inches from the right of the screen. The color of the line seems to change slightly depending on whats on the screen. For instance, I had the ladybug wallpaper and the line was almost complete all the way down (stil dotted with a missing section) and the color was bright green. With a different wallpaper that had a night sky and a green figure, the line flickered green/blue in the night sky area and steady green in the green part. My question is whether this is software or hardware related. I read many many other posts and many had display line problems but not the same as this one. Should I get this repaired? Is there anything I can do to fix this? Thanks

Hey man, sorry to heard you have a display problem too. I have a line at the bottom of my display which extends across horizontally. Fortunately, its just a clear, bleached looking line which I can mask with the dock. I dont think I could tolerate the line in which you have described.
I would bring it to the apple store that you bought it from and have one of the apple guys check it out. I would demand a replacement. They will try to repair it. You shouldnt be repairing a defective purchase.
I am on my 2nd MBP. My first was kernal panicing all the time. I got it to KP in the store and he immediately offered a replacement. Apple care is pretty good, so dont be afraid to bring it in and demand a replacement.
Better luck with your next one!

How to display first row value returened from a query as checked as default in a report

How to display first row value returned from a query as checked as default in a report
Example
Parameter 1
Paramerter2
ABD
x(checked)
Test
DEF
JMG
Mudassar

Hi Mudassar,
The issue is caused by the order in which the parameters appear in the report data tab can be difference between our report execution and it failing. In other words, “Parameter2” is execution before parameter “A” due to this issue. We can adjust the parameter’s
order to solve the issue.
If “Parameter2” is parameter “A”, we cannot use that expression. Because fields cannot be used in report parameter expression, if we want to display the first value returned from a query as default value, we have to fill the “Specify values” text box with
the specific value in Default Values dialog box.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

My first problem is that I have no apps on my iPod desktop. The second is that my battery died, and despite being able to charge it, it is unable to restart back up.

My first problem is that I have no apps on my iPod desktop. After using my computer to install something onto my iPod 5, it somehow disconnected. When i restarted the iPod, some apps (Safari, FaceTime, Game Center, App Store, iTunes Store, Camera, and some others disappeared. Apps like Flashlight and Jetpack Joyride which I had previousyl downloaded from the App Store were still there. I wanted to get the aforementioned apps back, so i decided to back-up my iPod to iTunes. The downloaded apps weren't able to be backed up ("authentication problems") but some apps like Tips, Video, iBooks, Reminders, Stocks, Settings, Voice Memos, were backed up. I then proceeded to factory reset the iPod, deleting everything and starting it as a new iPod. Once I finished this, I looked my desktop to see everything was gone, absolutely everything. I double-pressed the home button, showing Settings was open, but that's it. I opened settings and factory reset it again, this time choosing to restore from a backup. After doing this, I found the iPod looked the same as the last time i reset it - blank. If I scroll down the middle of the screen to bring up a search bar, I can find only the apps I backed up (Tips, Video, iBooks, Reminders, etc.) That is the first MAJOR problem. I was getting really frustrated, so I opened up iBooks and discovered I can download a could free books from the store, which was essentially the only thing I can use the iPod for. There were no videos in the Video app, and pressing the "Go to Store" button did absolutely nothing. No lag, it just ignored my touch. Once i found a few books, I decided to start reading. Eventually, i brought this iPod somewhere to read it, and didn't bring the charger with me. The battery died, and when i got home, tried charging it.
Which brings me to the second problem. A minute or so after I plugged in the charger into the dead iPod, the Apple logo came on. But the iPod never started up. The logo stayed there, getting dimmer after a minute, but no vanishing even after fully charging or pulling out the charging cord. It didn't leave even after hours, but by then the battery died again. If i press and hold the power button and the home button at the same time, the Apple logo disappears. But I can't get into recovery mode utilizing the volume buttons. If i hold the power button when the screen is blank, the Apple logo comes back. But the iPod cannot start up.
After everything was wiped, i was pretty angry. But I still had books to read, even if i couldn't do much else. Then the battery died, and it really wrecked me up. I feel so mad right now, although this actually happened about 4 days ago. The iPod being wiped happened about 3 days after the Christmas holidays began. This iPod also was not brand new, I bought it off a friend who had it for over a year, although it was in perfect condition (Obviously out of warranty.) I desperately need a solution to this HUGE problem. Due to personal reasons, I can't go to a Genius Bar or go to an Apple retailer in person, but communicating by E-mail is an option, as is instant messaging.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Facing "Display Flickering" problem with my 15" macbook pro(A1286)while swapping the desktops and closing the tabs.....need help...reply soon

Suggest Solution for this Display Flickering problem ....

Hi, I read the post about calibration and I probably do that a little too often TBH! As I get so little time out the battery and mainly use my MBP on my lap, usually with the power supply near by, it gets charged to full, run to empty to the point of sleep, or sometimes it even cuts out and then is recharged to full again, so I really think it's new battery time. I've seen non Apple Official ones for between £35 and £65 that have 3 year warranties and state they are around 5200mh but am unsure due to reviews.
Later...
Anyway's I have now ordered a non Apple replacement from Amazon for about £35 and it has several good reviews and 4.5 out of 5 stars so I'll see if it works and report back. If it doesn't I'll send it back and get the Official Apple one.
Message was edited by: Missy Steph

Macbook display color problems

macbook, mac os 10.5.8 updated, display color problem. when i try to fix it by color sync. it says:
/Library/Application Support/Adobe/Color/Profiles/DCDM_X'Y'Z'.icc
Tag 'A2B1': Requiredtag is not present.
Tag 'B2A1': Requiredtag is not present.
Tag 'A2B2': Requiredtag is not present.
Tag 'B2A2': Requiredtag is not present.
Tag 'gamt': Requiredtag is not present.
The file is locked. could not be fixed.
/Library/Application Support/Adobe/Color/Profiles/DCI_P3.icc
Tag 'A2B1': Requiredtag is not present.
Tag 'B2A1': Requiredtag is not present.
Tag 'A2B2': Requiredtag is not present.
Tag 'B2A2': Requiredtag is not present.
Tag 'gamt': Requiredtag is not present.
The file is locked. could not be fixed.
Repair done - 0 out of 2 profiles fixed.
Kindly assist what to do.

Welcome to Apple Discussions!
Pictures would help. A good way to do this is to post them to a free photo sharing site like Flickr and then post a link.
Also, you are in the original MBP section, and I think you need to post your question in the newer MBP section:
http://discussions.apple.com/forum.jspa?forumID=1294
Good luck!

Only display first form URL in formsweb.cfg . mutiple URL does not work

Hi Friends,
I have 4 form application with 4 URL.
app. server as 10g in window 2003.
URL like as:
http://salerpt.com/forms/frmservlet?config=emis-srmenu
fmx file Location as C:\OraMid\forms\salerpt-Forms fmx name as srmenu.fmx in same directory
fmb file location as C:\OraMid\forms\salerpt-Forms_source fmx name as srmenu.fmb in same directory
# Single Sign-On OID configuration parameter
oracle_home=C:\OraMid
in formweb.cfg file
baseHTMLjinitiator=basejini.htm
workingDirector : workingDirectory= blank. but C:\OraMid\forms\salerpt-Forms right now
# Forms runtime argument: which form module to run
##form=test.fmx
## i moved bottom section of form section in here and before
##line as Forms runtime argument: database connection details
comment two line
#jinit_exename=jinit.exe
#jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
I create 4 sections as
form=srmenu.fmx
width=1200
height=700
pageTitle=Sale Information System (SIS)
form=regsale.fmx
form=salefinincial.fmx
form=rptinfo.fmx
However it only display first srmenu form interface that i put in( 4 different URL. only display first URL)
It seems that one formsweb.cfg, it doesn not support multip form setting application.
I have 4 small forms application with 4 URL for one formsweb.cfg.
What should I need to do? I think that i miss some set up in configuration.
I am waiting for your help!
JIm

Hi Bgrant,
Please review my formsweb,cfg.
Thanks
I am looking for your help.
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory= C:\OraMid\forms\sales-Forms
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
#form=test.fmx
[[srmenu]]
form=srmenu.fmx
width=1200
height=700
pageTitle=Sale Management Information System
[[regsale]]
form=regsale.fmx
width=1200
height=1500
pageTitle=Sale Management Information System
[[salefinincial]
form=salefinincial.fmx
width=1200
height=1300
pageTitle=Sale Management Information System
[[rtpinfo]]
form=rptinfo.fmx
width=1200
height=1000
pageTitle=Sale Management Information System
# Forms runtime argument: database connection details
userid=scott/tigerd@oracleapp
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
#width=750
width=1024
# Forms applet parameter
#height=600
height=768
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
#jinit_exename=jinit.exe
#Version=1,3,1,22
# Parameter related to the version of JInitiator
#jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=1
# Single Sign-On OID configuration parameter
oid_formsid=formsApp_sales.com_0Axxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# Single Sign-On OID configuration parameter
oracle_home=C:\OraMid
# Single Sign-On OID configuration parameter
formsid_group_dn=cn=Logical Application Group, orclApplicationCommonName=formsApp_sales.com_0A4911717Fxxxxxxxxxx, cn=forms, cn=Products, cn=OracleContext
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=False
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle

Only display first item when item no is bound to viewBT117S_SRC/AdvancedSRL

Hi ;
I want to add order item attributes to the lines of the page "service confirmatioms" , at first It was displaying only order header lines in standart , i enhanced the context node and added "item line no" of the orders but in the view it displays first item lines for each order.ıf you have 18 orders , it displays only 18 lines and only item no 10 for each one.
new attribute i added to the context no in following orders (item line no)
-->BTADVSSrvCfm
    -->BTOrderHeader
       -->BTHeaderItemsExt
           --> BTOrderItemAll
                -->Item No
For each order I have at least 2 lines , Why does it displays only first items after I enhanced the context node by adding item line no?
What sould I follow the steps?
Thanks

Hi ;
I want to add order item attributes to the lines of the page "service confirmatioms" , at first It was displaying only order header lines in standart , i enhanced the context node and added "item line no" of the orders but in the view it displays first item lines for each order.ıf you have 18 orders , it displays only 18 lines and only item no 10 for each one.
new attribute i added to the context no in following orders (item line no)
-->BTADVSSrvCfm
    -->BTOrderHeader
       -->BTHeaderItemsExt
           --> BTOrderItemAll
                -->Item No
For each order I have at least 2 lines , Why does it displays only first items after I enhanced the context node by adding item line no?
What sould I follow the steps?
Thanks

Pages to EPUB: Table of Contents displaying FIRST?

I saw this question posed earlier, and no solution was raised.
Does anyone know why my TOC is displaying FIRST when I export to EPUB, instead of behind the Title and Copyright pages, as I have it set on the pages document?
Thank you!

Same here. Very annoing, and I cannot find any way to fix this.

I want to perform bidirectional i/o using a pci-6534.The problem is that i need to use the same lines for i/p and o/p. is that possible?

I want to perform bidirectional i/o using a pci-6534.The problem is that i need to use the same lines for i/p and o/p. is that possible? And if it is how an i doing this?

Hi I Pant,
The idea that crossed my mind was to tie each of the lines coming from/going to "your device" to two of the DIO lines. Configure one these two ports as input, the other as output.
When you want to read the state of the line, read from the line configured as input. Similarly, use the other port when it is time to write.
Provided "your device" uses tri-state drivers/receivers, or can be used in a "wired-OR" configuration, this may work.
What is "your device"?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

6714 init PCI display first problem

Similar Messages

Maybe you are looking for