6760s Voip phone
I would like to set the 6760s ( V 21.005 custom version jblack 50.01 )like a VOIP phone.
I went already to: " Tools-Phone settings-Connection-SIP settings " and i setted and registered a SIP provider in "Options " menu i have also setted it as "Default profile" .
The SIP provider is registered and underscored but the phone does'nt work.
There is any other setting to do or that's all ?
I think that if there is "SIP settings" menu the phone shoud work as VOIP phone like others Nokia mobile phones.
Please, anybody cna give me an help for this topic ?
Thanks.
Never set this up my self but the User guide is not at help at all?
https://www.developer.nokia.com/info/sw.nokia.com/id/4ecbad3f-764e-4095-9d1f-944bb7d21b69/SIP_VoIP_S...
As far as i know, when you have set up the SIP settings you can then under Contacts add a new contact, or edit an existing user and add a SIP number to that contact
If you set up the SIP settings correct.
In the phone go to Menu -> Contacts -> Options -> New contact
Option -> Add detail -> SIP
You should in theory then be able to dial that SIP number and it should work
Similar Messages
-
SP-3102 - Unable to make VOIP phone calls after switching router
I had to change the router from Netgear (g) to Belkin N+ (n). Changed the SPA-3102 config to DHCP, it picked up an IP and showed the 1st 3 LEDs lit, status Registered. So, good news.
I am able to receive VOIP phone calls, but not able to make phone calls, it won't dial. I installed slogsrv.exe and got the following log: syslog.514.log. Unfortunately, it's chinese to me.
Please help,
DanielTry checking any settings on the old router which you might need to configure also on the new router to get VoIP working like port forwarding, dmz or disabling the NAT. The Belkin might have a feature like NAT which behaves differently so you might need to open up VoIP ports or enable NAT mapping and NAT Keep Alive on the SPA.
-
VoIP Phones - Testing Latency, Jitter, and Packet Loss
I am having big problems with my VoIP phone connection and I'll try to lay it out clearly here.
The main telephone system resides at Location A (static IP address - see below - xxx.xxx.206.19), which has a network connection of 50MB down/20MB up (i.e., very fast). The VoIP phone configured for that system resides at Location B, which has a network connection of 10MB down/1MB up (i.e., also fast, or at least fast enough "on paper" for a quality VoIP connection). The LAN at Location A uses an Airport Extreme router, which does not have QOS or EF capability. The LAN at Location B uses a D-Link DIR-655 router which does have QOS that is configured properly to direct all traffic to the VoIP phone's IP address.
The VoIP phone at Location B is having intermittent call quality problems with skipping of words, hollowing out noises, jittery conversations, etc. All the inquiries I've made to the ISPs and phone system manufacturer (ESI) suggest that my base Internet speeds are not the problem.
I'm told, instead, that the problem might be latency, jitter, or packet loss between Location A and Location B. This leads to several questions:
(1) Is there any Mac software that can test latency, jitter, and packet loss? I've looked at Network Utility and it seems to only measure a few things.
(2) Does anyone see anything in the following Traceroute and Ping results (done twice from Location B to Location A) that looks problematic to VoIP quality?:
Traceroute:
First run: Traceroute has started…
traceroute to xxx.xxx.206.19 (xxx.xxx.206.19), 64 hops max, 72 byte packets
1 alfirving (192.168.0.1) 0.569 ms 0.363 ms 0.302 ms
2 10.72.28.1 (10.72.28.1) 27.567 ms 18.161 ms 22.288 ms
3 70.125.216.150 (70.125.216.150) 9.841 ms 10.346 ms 9.497 ms
4 24.164.209.116 (24.164.209.116) 11.042 ms 8.298 ms 9.433 ms
5 70.125.216.108 (70.125.216.108) 21.068 ms 20.657 ms 12.045 ms
6 te0-8-0-2.dllatxl3-cr01.texas.rr.com (72.179.205.48) 11.154 ms 11.540 ms 24.495 ms
7 107.14.17.136 (107.14.17.136) 11.994 ms 14.217 ms 15.816 ms
8 ae-3-0.pr0.dfw10.tbone.rr.com (66.109.6.209) 14.566 ms 32.670 ms 15.947 ms
9 ix-0-3-2-0.tcore2.dt8-dallas.as6453.net (209.58.47.105) 11.647 ms 12.260 ms 12.386 ms
10 if-2-2.tcore1.dt8-dallas.as6453.net (66.110.56.5) 10.023 ms 12.285 ms 12.338 ms
11 209.58.47.74 (209.58.47.74) 17.641 ms 16.741 ms 16.372 ms
12 0.ae2.xl3.dfw7.alter.net (152.63.97.57) 11.584 ms 12.315 ms 12.890 ms
13 0.so-6-1-0.dfw01-bb-rtr1.verizon-gni.net (152.63.1.90) 13.812 ms
0.ge-3-0-0.dfw01-bb-rtr1.verizon-gni.net (152.63.1.17) 18.831 ms
130.81.23.164 (130.81.23.164) 14.189 ms
14 p14-0-0.dllstx-lcr-05.verizon-gni.net (130.81.27.40) 14.561 ms 13.621 ms 15.544 ms
15 * * *
16 static-xxx.xxx.206.19.dllstx.fios.verizon.net (xxx.xxx.206.19) 23.125 ms 24.136 ms 22.411 ms
Second run: Traceroute has started…
traceroute to xxx.xxx.206.19 (xxx.xxx.206.19), 64 hops max, 72 byte packets
1 alfirving (192.168.0.1) 0.603 ms 0.420 ms 0.324 ms
2 10.72.28.1 (10.72.28.1) 40.494 ms 26.625 ms 14.152 ms
3 70.125.216.150 (70.125.216.150) 9.431 ms 9.660 ms 9.018 ms
4 24.164.209.116 (24.164.209.116) 16.293 ms 12.339 ms 19.252 ms
5 70.125.216.108 (70.125.216.108) 15.801 ms 11.438 ms 12.068 ms
6 te0-8-0-2.dllatxl3-cr01.texas.rr.com (72.179.205.48) 23.221 ms 30.459 ms 17.519 ms
7 107.14.17.136 (107.14.17.136) 14.611 ms 15.696 ms 15.775 ms
8 ae-3-0.pr0.dfw10.tbone.rr.com (66.109.6.209) 17.643 ms 14.812 ms 16.294 ms
9 ix-0-3-2-0.tcore2.dt8-dallas.as6453.net (209.58.47.105) 11.169 ms 12.374 ms 9.849 ms
10 if-2-2.tcore1.dt8-dallas.as6453.net (66.110.56.5) 16.453 ms 12.168 ms 12.384 ms
11 209.58.47.74 (209.58.47.74) 18.015 ms 14.867 ms 16.432 ms
12 0.ae2.xl3.dfw7.alter.net (152.63.97.57) 11.471 ms 11.993 ms 12.395 ms
13 0.ge-6-3-0.dfw01-bb-rtr1.verizon-gni.net (152.63.96.42) 14.077 ms 29.153 ms
0.ge-3-0-0.dfw01-bb-rtr1.verizon-gni.net (152.63.1.17) 17.962 ms
14 p14-0-0.dllstx-lcr-05.verizon-gni.net (130.81.27.40) 14.629 ms 12.297 ms 12.839 ms
15 * * *
16 static-xxx.xxx.206.19.dllstx.fios.verizon.net (xxx.xxx.206.19) 24.976 ms 22.170 ms 22.376 ms
Ping:
First Run: Ping has started…
PING xxx.xxx.206.19 (xxx.xxx.206.19): 56 data bytes
64 bytes from xxx.xxx.206.19: icmp_seq=0 ttl=242 time=22.814 ms
64 bytes from xxx.xxx.206.19: icmp_seq=1 ttl=242 time=24.621 ms
64 bytes from xxx.xxx.206.19: icmp_seq=2 ttl=242 time=24.711 ms
64 bytes from xxx.xxx.206.19: icmp_seq=3 ttl=242 time=24.109 ms
64 bytes from xxx.xxx.206.19: icmp_seq=4 ttl=242 time=23.336 ms
64 bytes from xxx.xxx.206.19: icmp_seq=5 ttl=242 time=25.644 ms
64 bytes from xxx.xxx.206.19: icmp_seq=6 ttl=242 time=27.755 ms
64 bytes from xxx.xxx.206.19: icmp_seq=7 ttl=242 time=25.135 ms
64 bytes from xxx.xxx.206.19: icmp_seq=8 ttl=242 time=22.443 ms
64 bytes from xxx.xxx.206.19: icmp_seq=9 ttl=242 time=24.635 ms
--- xxx.xxx.206.19 ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 22.443/24.520/27.755/1.448 ms
Second Run: Ping has started…
PING xxx.xxx.206.19 (xxx.xxx.206.19): 56 data bytes
64 bytes from xxx.xxx.206.19: icmp_seq=0 ttl=242 time=27.183 ms
64 bytes from xxx.xxx.206.19: icmp_seq=1 ttl=242 time=24.629 ms
64 bytes from xxx.xxx.206.19: icmp_seq=2 ttl=242 time=22.511 ms
64 bytes from xxx.xxx.206.19: icmp_seq=3 ttl=242 time=39.620 ms
64 bytes from xxx.xxx.206.19: icmp_seq=4 ttl=242 time=26.722 ms
64 bytes from xxx.xxx.206.19: icmp_seq=5 ttl=242 time=23.183 ms
64 bytes from xxx.xxx.206.19: icmp_seq=6 ttl=242 time=25.171 ms
64 bytes from xxx.xxx.206.19: icmp_seq=7 ttl=242 time=24.412 ms
64 bytes from xxx.xxx.206.19: icmp_seq=8 ttl=242 time=23.837 ms
64 bytes from xxx.xxx.206.19: icmp_seq=9 ttl=242 time=23.785 ms
--- xxx.xxx.206.19 ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 22.511/26.105/39.620/4.713 ms
(3) Any other ideas on what my call quality problem might be, or how I can tweak it? For example, would putting a DIR-655 router at Location A and enabling QOS really make a difference?
Thanks to everyone, and I hope this is not too long or difficult to understand.Hey thanks for your reply Yeah im only getting 1 ro sometimes 2 bars reception so hopefully the antenna will beef things up but I think it is what it is perhaps.
-
Hello there,
I'm pretty new to VoIP so please bare with me.. Reading about VoIP phones I've found that you have to buy some kind of license no matter which phone you are using : " All Cisco Unified IP phones require the purchase of a phone user license, regardless of call protocol being used. " Please can someone give me a link or enlighten me a little about them.
Questions :
1. what are these licenses, why should I buy them, how much do they cost ?
2. Is this the only license I'll have to buy to use the ip phone ? Or I'll need some kind of software license too?
Thank youDLUs = Device License Unit
depending on the phone model how many they use, you need to contact pre-sales or licensing for them
if you don't have the DLUs you cannot add phones
the SKU from each phone entitles you to the necessary DLUs for that phone but DLUs can be purchased separately
you also need a node license to activate the CCM service if 5.x and an extra feature license if running 6.x
you can look "licensing" on cco and will get more info
HTH
java
if this helps, please rate -
DHCP - Cannot add text option for VOIP phones in OES Linux
While working through this, I solved the issue, but decided to post this anyway as it may help others to find these sorts of errors.
I'm working on migrating from NetWare 6.5sp8 to OES11sp2. Client has Shoretel VOIP phones. Existing NetWare-based DHCP has no problem. Option 156 has been configured to give out the required text information that Shoretel phones require.
Problem is that I could not get the OES11 DHCP to run with that option. Nor could I migrate the existing option over - the Migration Tool (in OES11) says it successfully migrates DHCP, but I cannot start the dhcpd daemon. Error is that it failed, and in the rc.dhcpd.log file I see an error:
LDAP Line 26: unknown option dhcp.Shoretel_Boot.
LDAP Line 26: unexpected end of file
LDAP: cannot parse dhcpService entry 'cn=newdhcpservice,o=LIBRARY'
Configuration file errors encountered -- exiting
If I look in the file (created when LDAP reads DHCP config from eDirectory apparently) dhcp-ldap-startup.log I can see the problem entry at line 26:
option Shoretel_Boot "FTPSERVERS=172.30.43.8,COUNTRY=1,LANGUAGE=1,L AYER default-lease-time 259200 ;
This option does NOT show up in the newdhcpservice option when I look at it in ConsoleOne, or DSBROWSE, or DNS/DHCP Management Console.
This option DOES show up in the DNS/DHCPManagement Console if I look at the DHCP (NetWare) tab and look at Other DHCP Options for some of the configured subnets, but it actually has different text from the above, specifically:
FTPSERVERS=172.30.43.8,COUNTRY=1,LANGUAGE=1,LAYER2 TAGGING=1,VLANID=9
Note that it does not have a " character anywhere in the entry. This option is configured as a Global DHCP text option.
Novell TID 7009464 mentions the issue, though not for Option 156. In that TID there is this:
"Situation #2
Migrate a working DHCP server with DHCP options that are of type "Text" to an OES server.
Load the DHCP server service... it fails to load and gives similar errors to the ones listed above."
Under resolution the TID says to delete and recreate the dhcp service object without the text option and it will load. That doesn't work for me as I still get an LDAP error pointing to the Shoretel_Boot unknown option. (I dare not try deleting it from the NetWare DHCP config and risk breaking the client's phone system).
One of the options in the TID to fix this is to re-enter the data using the DNS/DHCP Management Console - but that didn't work.
Here is the answer:
First, the log files are misleading. The error message points to not being able to read the newdhcpservice object entry - but the problem was elsewhere. In fact the problem showed up in the logs even when there were no option 156 entries at all in any object inside the newdhcpservice or the newdhcpservice object itself. The problem existed in the NetWare configuration of the object for one of the dhcp subnets.
Specifically, there was an illegal character in the text entry for option 156 - the # character was in there, like this:
FTPSERVERS=172.30.43.8,COUNTRY=1,LANGUAGE=1,LAYER# 2TAGGING=1,VLANID=9
If you look at the error log entry for syntax error you can see that the option 156 text stopped at the # symbol, and then default-lease-time was appended to the end.
Removing the # symbol got things working.
Craig Johnson
(former Novell partner / sysop)On 30/08/2014 21:16, phxazcraig wrote:
> While working through this, I solved the issue, but decided to post this
> anyway as it may help others to find these sorts of errors.
>
> I'm working on migrating from NetWare 6.5sp8 to OES11sp2. Client has
> Shoretel VOIP phones. Existing NetWare-based DHCP has no problem.
> Option 156 has been configured to give out the required text information
> that Shoretel phones require.
>
> Problem is that I could not get the OES11 DHCP to run with that option.
> Nor could I migrate the existing option over - the Migration Tool (in
> OES11) says it successfully migrates DHCP, but I cannot start the dhcpd
> daemon. Error is that it failed, and in the rc.dhcpd.log file I see
> an error:
>
> LDAP Line 26: unknown option dhcp.Shoretel_Boot.
> LDAP Line 26: unexpected end of file
> LDAP: cannot parse dhcpService entry 'cn=newdhcpservice,o=LIBRARY'
> Configuration file errors encountered -- exiting
>
>
> If I look in the file (created when LDAP reads DHCP config from
> eDirectory apparently) dhcp-ldap-startup.log I can see the problem entry
> at line 26:
>
> option Shoretel_Boot
> "FTPSERVERS=172.30.43.8,COUNTRY=1,LANGUAGE=1,L AYER default-lease-time
> 259200 ;
>
>
> This option does NOT show up in the newdhcpservice option when I look at
> it in ConsoleOne, or DSBROWSE, or DNS/DHCP Management Console.
>
> This option DOES show up in the DNS/DHCPManagement Console if I look at
> the DHCP (NetWare) tab and look at Other DHCP Options for some of the
> configured subnets, but it actually has different text from the above,
> specifically:
>
> FTPSERVERS=172.30.43.8,COUNTRY=1,LANGUAGE=1,LAYER2 TAGGING=1,VLANID=9
>
> Note that it does not have a " character anywhere in the entry. This
> option is configured as a Global DHCP text option.
>
> Novell TID 7009464 mentions the issue, though not for Option 156. In
> that TID there is this:
> "Situation #2
> Migrate a working DHCP server with DHCP options that are of type
> "Text" to an OES server.
> Load the DHCP server service... it fails to load and gives similar
> errors to the ones listed above."
>
> Under resolution the TID says to delete and recreate the dhcp service
> object without the text option and it will load. That doesn't work for
> me as I still get an LDAP error pointing to the Shoretel_Boot unknown
> option. (I dare not try deleting it from the NetWare DHCP config and
> risk breaking the client's phone system).
>
> One of the options in the TID to fix this is to re-enter the data using
> the DNS/DHCP Management Console - but that didn't work.
>
> Here is the answer:
> First, the log files are misleading. The error message points to not
> being able to read the newdhcpservice object entry - but the problem was
> elsewhere. In fact the problem showed up in the logs even when there
> were no option 156 entries at all in any object inside the
> newdhcpservice or the newdhcpservice object itself. The problem
> existed in the NetWare configuration of the object for one of the dhcp
> subnets.
>
> Specifically, there was an illegal character in the text entry for
> option 156 - the # character was in there, like this:
>
> FTPSERVERS=172.30.43.8,COUNTRY=1,LANGUAGE=1,LAYER# 2TAGGING=1,VLANID=9
>
> If you look at the error log entry for syntax error you can see that the
> option 156 text stopped at the # symbol, and then default-lease-time was
> appended to the end.
>
> Removing the # symbol got things working.
>
> Craig Johnson
> (former Novell partner / sysop)
Thanks for taking the time to post the above as I'm sure it will help
someone else in the future.
Simon
Novell Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks. -
Voip phone\ BT Broadband softphone rings too quiet...
Hi all
I have a Sogatel Voip phone and the BT broadband talk softphone.
Here is some information on my internet connection.
Connection type Wireless
Wireless Adapter Buffalo Nfinity
Network provider BT Broadband
Router BT Home Hub 2
Encryption type WPA2
Internet browsers in use Chrome and Firefox
Firewall used Zonealarm
The router is in another room but is not too far away.
Signal strength: excellent, 5 bars.
Speed it connects at: 130 Mbps
The connection is generally fine but It rings too quietly. Can anybody help me turn the volume and make it ring loudly because I don't know how to do this.
Thanks in advance.You are currently in a 10 day line training period the important thing now is not to manually restart your hub and let the exchange equipment find you best speed and stability
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’ -
VoIP phones losing connection randomly for a brief moment
So back story here. Just installed two SG200-26 switches (replacing a unmanaged switch) which are connected together via a trunk.
However my SPA921 VoIP phones randomly have the Mic light flash red (which indicates loss of network connection). It happens for a literally a second and reconnects. When pinging the phone you can see a single ping not getting a reply. It also appears randomly on what seems to be most of the phones but not all at the same time, some may be fine while maybe one or two have the issue. It may have it continuously loosing connection for a brief moments for a while then likewise it my be fine for a while or the rest of the day.
Im looking for some ideas for troubleshooting. So far I tried changing the phone ports to static 10M half duplex instead of autosensing and this seems to not have resolved the issue.
Your help is appreciated.
Thanks
LiamThis was one of the ports I was having a problem with, It went down and up becuase I had done a Admin Shutdown on it. However what is it refering to by 'Aggregated'?
2147483158
2013-Aug-28 17:18:32
Informational
%LINK-I-Up: gi15, aggregated (3)
2147483159
2013-Aug-28 17:18:20
Warning
%LINK-W-Down: gi15, aggregated (3)
Also brief loss of connection happens even when not going through the trunk -
Toshiba USB VoIP Phone PX1214E-1UPH
I bought a toshiba voip phone PX1214E-1UPH that was supplied with an application cd. The matter is that the cleanning laday sent the box with this cd inside it, to the garbage. As you understant, i've lost it. I've also turned the internet upside down so that i can find the API that integrates this equipment with Skype. I just did'nt find any website (including the official toshiba site) where this software was available for download. What can I do about this? Does anyone in the forum has the software tha can send me? ([email protected]); does anyone knows a website where the API is available for download? Thank you all.
Maybe its possible to order this software from the Toshiba service partner in your country. I dont know if it possible but you should contact the guys.
-
HomeHub VOIP Phone- ASDL Filter required??
I've had conflicting advice on this query, from BT Tech help and an actual BT Openreach engineer who repaired an outside phone line fault last week......
I use an ordinary old 900Mhz cordless phone, as my Internet 056 number VOIP phone, on my HomeHub V.2.
BT Tech Help advised me that I should connect the phone to my HomeHub using an ASDL filter, to remove any potential interference to the Hub from the cordless phone, but the BT Openreach engineer says I don't need to use any ASDL filter.
Who's correct?? Any ideas, please,
David Grieve of ScotlandHi David,
Thank you for your post. Just to clear up any confusion, if you are connecting a cordless phone to your Hub you do not need to connect a microfilter to it. A microfilter is only needed for any device connected directly to your telephone line.
Thanks
Paddy,
BTCare Community Mod
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
Hi I am trying to set up a VoIP phone using a VPN on tunnel back to our office bt help says infinity does not support this does this make sense is there a work around or different router I can use?
Welcome to the BT Residential Customers forum
If you are a business user, please could you post on the BT Business forum at http://business.forums.bt.com/
Thanks
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
I have to change my old PHILIPS VOIP PHONE 321 with new one because in the moment I change Windows operative sistem it stopped to wark. Someone could suggest a good substitute? Thank You.
Use a secure app in the first place, like Vonage or Skype.
-
PAP2T VOIP phone adapter not working
My new Linksys PAP2T VOIP phone adapter will not work. When I install the adapter (I'm sure I have done this correctly), all I get is a slow blinking green power light and a fast blinking green internet light. I get no phone light, and I get no dial tone. Is my PAP2T defective? Or is something else going on? Can you recommend a fix?
The "User Guide" which comes with your PAP2T and you can read or is downloadable from Linksys says the following about the "Power Lite"
Green. The Power LED lights up when the Phone Adapter is powered on and connected to the Internet. It flashes when the Phone Adapter is not connected to the Internet. The LED also flashes when the Phone Adapter is booting up or upgrading its firmware.
It says the following about the "Internet Lite"
Green. The INTERNET LED lights up when there is an active connection through the port. If the LED is flashing, then there is traffic moving through that port.
It says the following about the "Phone Lite"
Green. The PHONE LED is solidly lit when a telephone or fax machine has an active or registered connection to your Internet phone service provider through the corresponding port. It flashes when the phone is being used or is off the hook.
Using logic, I would say the adapter may not connected to the internet and if it is, the adapter failed to register with your voip provider. -
Hello,
So I am wondering if the issue with VoIP phones is universal with the LRT224 Phone? Has this problem been reproduced in the Linksys labs? Will this issue be addressed by Linksys Engineers?
Would have settuping up VLAN's worked?Hey,
Sorry for the delayed response. We have one LRT224 with two WAN Connections and one LAPN600 for the access point. Our network is completely wireless with around 30 devices total (7 IP Phones). We use Cisco SPA525G Phones.
Our VoIP provider is Jive Communications.
I am using the EA4500 and everything works fine on it. The main issue I am having with these phones going through the LRT224 is that phone calls were not coming, and you could not dial other extension throughout the office.
If you have any other questions, please let me know. -
VOIP phone and airport express
I've been trying to use my old airport express as a remote access point to connect a VOIP phone to my Airport Extreme network. These are both older airports, "pre-N" and from what I've read here, what I'm trying to do won't work.
So, the question is, can I use the new Airport Express(N) to connect the VOIP phone to a Time Capsule(N)? If so, how do I set up the Express? The VOIP phone uses ethernet, and currently works through the LAN on port on my current airport base station.
Thanks.I've use Netgear adapters and a no name brand from DirectTV. Linksys has them, probably D-Link as well. Best Buy will have several to choose from. About $100-150 for a pair.
Now, your question about whether the "g" Express could deliver an ethernet signal. In normal operation, no. But, if the TC and Express were both configured as part of a WDS (Wireless Distribution Network), the ethernet port becomes active in that event. But...you lose half of the bandwidth on your wireless network. WDS is difficult to configure as well.
The newer Express(n) is much simpler to configure and you won't have the big bandwidth penalty with the "extend a wireless network" setup.
Depending on how your wireless signal strength looks in the office, this will work. But, keep in mind there are far more problems with wireless drops, interference issues, etc. The boards are alive with these types of problems.
I think if it were me, (and this was my business phone), I would go with the ethernet powerline adapters, but make sure you get a return for refund privilege...just in case. -
Booted off Verizon Fios Internet when use VOIP phone.
When I use my VOIP phone while on the internet (I use Verison FIOS Internet), I get booted off the internet. I have done what tech support said to do which was to do a hard reboot of the router but after a short while it does it again. They had no more answers for me than that. Does anyone else know what can be done?
Thanks.albcmb wrote:
I have Fios Internet, TV and Phone and so I HAVE to use the Verizon router made by Actiontec. My Mac Book Pro is Leopard based.
Does the router have the latest firmware? Very important.
The problem is that I am paying for 20mbps service and getting about 6 to 8. This is regardless of where I am in physical relation to the router/modem and whether or not I am the only computer connected to the internet.
How are you measuring your speed?
PLEASE help. I have contacted Verizon and they have no ideas that help. I cannot watch Netflix or Boxee and even regular internet pages load painfully slowly.
I have a cable modem that runs at 10Mb/s and internet pages load instantly. On this Verizon DSL I am currently using, which creeps along at a mere 3 Mb/s, pages internet pages load instantly.
Even if your connection is 6 to 8 Mb/s, pages should load instantly, and streaming should work properly.
Clearly, you have some other problem with your system.
Again, how are you measuring your speed? What is your link speed? What are your measured upload and download speeds?
If you are using the router as a WiFi then you may not be getting the full speed you expect from a direct connection.
You need to supply much more real hard data than you have.
Your subject says that "Verizon Fios Internet, TV and Phone with Mac Book Pro is SLOW!" and Leopard has nothing to do with your TV or phone.
Message was edited by: nerowolfe
Maybe you are looking for
-
STMS Import queue Fails - FTP_FAILED
Hi All Stms import queue fails with the following error message System BWP Command TMS_MGR_TRANSMIT_TR_QUEUE Client 001 Service Transport Service User SAPBASIS Start Online Date 14.05.2009
-
Menu disappears when accessing menu items in Web Dynpro
Hi friends, I have a peculiar problem. I created a webdynpro application in WD for ABAP which displays a menu of Employee self services(ESS). In the window on the leftside the menu is displayed. if you click on any of the service name, the correspond
-
MacBookpro Early 2011 graphic issue won't boot
Hello, My Early 2011 MacBookPro suddenly suffered from graphics issues for a few days then it won't boot at all. The hardware test says it is ok and my hard drive too. But when I want to boot, the apple appears and the dong too, but then blank screen
-
[ID CS2 Mac]Please tell me the Suitable IDE?
Hi all, I want to develop a plug in InDesign CS2 on Mac 10.5 . I have downloaded this SDK :Adobe InDesign CS2 4.0.2 Products SDK. I read the Readme.txt & found that the IDE for developing a plugin on Mac is Metrowreks CodeWarrior 9.3 . Right now ther
-
In Dw database, i have tablespace of 1.2TB size in that used segment only 300GB and rest of 900GB is free space. I am not able to shrink the datafiles it throws me ORA-03297, i run shrink space compact and shrink space based on segment advisor report