6921 Wall Mount - The Clip to keep the phone on hook keeps falling out!!

Has anyone experienced this issue with the 6921 on-hook clips. We turn the clip around when the phone is wall mounted and it hold the phone in. But it comes out so easily, as soon as you lift the handset out it pulls the clips out!!! we have like 30 - 6921 phones that have done this. I need to know if its possible to get spare 6921 clips, because we need them, anyone have an info on this? Thanks

no, All the vendors I talked with say the phone is too new and not worth the money to fabricate yet. Not enough call for them.

Similar Messages

How can I select just the clips, or just the transitions?

If I have a timeline with 50 or more clips (or still shots, in my case) with cross dissolves between each one, I would like to select just the clips, or just the transitions, but not both. How do I do this?
Why? I am creating a video with hundreds of stills and a few video clips, and occasiionally need to change the duration of all stills at the same time (from 3 seconds to 4, for example). Or, if I want all of the cross dissolves to last 1:15 instead of 1:00, it would be nice to select and change them all at once. However, in both cases, I can't figure out how to select all 50 without having to Command-click 50 times.
Any ideas you have will be appreciated.
Bart

To perform the same duration change on just the transitions (cross dissolves, in this example), this technique will work:
Open timeline index.
Enter "cross" in the search box (or whatever transition you're wanting to change).
Select all cross dissolves in list (click one, then type Command-A).
Click the time strip in the top of the timeline area.
All of the transitions in the list should now be selected in the timeline.
Control-D to change duration.
Enter new duration.
Hit Return.
I hope this saves someone all of the time I spent on it today. I'm still ahead, though, thanks to Tom's help. This saved litterally hundreds of Command-clicks.
Bart

Why is the view of the clip different then the view of the project?

why is the view of the clip different then the view of the project?

Yes you are correct, it is with the setting of the properties.
Where do i report this then if it is not with the SDK but the manual setting of properties.
Also, how do i alter this ussue with the SDK, what are the commands, does it have to be done only by Javascript?

Importing my video from my event library into my project library, it shows the full width of the clip, but on the viewing section, it's zoomed in and cut the sides of the video off. How do I stop this from happening?

When importing my video from the event library to the project library, it's zooming in and
narrowing the width of my footage. How do I stop this from happening?

In the project, double-click on the clip to open the Clip Inspector. In the Clip tab you will see an item about two thirds down labelled "Stabilization". If checked, uncheck the box "Smooth clip motion".
Stabilizing clips causes a zoomed in effect, with the extent of the zoom dependent upon how shaky the footage is. There is a slider beneath the check-box labelled "Maximum Zoom" - this can be draggged back and forth to adjust the zoom effect if desired, once the clip has been stabilized.
You may have chosen to analyze clips for stabilization when importing to iMovie (that's a choice provided by iMovie upon import). If so, it's best to turn off an option in iMovie's preferences. Go to this from the iMovie menu item iMovie>Preferences. Click on the Browser tab and deselect (uncheck) the box labelled "Automatically stabilize clips that have been analyzed".
I prefer to import clips without analyzing, as this speeds up the import process. Afterwards, in the Event you can check for any overly shaky clips, then analyze them in the Inspector. If necessary, once dropped into a Project, you can stabilize them as desired. You can also stabilize clips directly in the Project without having to first analyze them in the Event.
John
Message was edited by: John Cogdell

RE: Help in changing the clip to match the sequence

Hi All,
I'm a novice using premiere Pro CS6 and having problems with something so hoping someone can advise.
Basically I've imported some clips into the project folder. the first clip i imported into the timeline gave me a pop up saying this clip does not match the sequence settings. i had obviously chosen the wrong settings but premiere recognised the mistake and prompted me. Now I opted to change the sequence setting and the clip worked and fitted fully in the program panel when played on there.
however when I choose another clip and drag it into the timeline, the clip has black sides and appears to be smaller in the program panel e.e. it is not fully fitted even tho the drop down is on 'fit' . I had no pop up asking me to change the clip to match sequence setting for this either.
How else do I match this clip to the sequence if no pop up come up to change it?
its prob well simple - but I cant work it out?? please help

Hey tstormSierra,
thanks for your ply.
The problem is that the clip I first put on the timeline was from someone who filmed a boring long clip of a karate fight, so there were no camera angles or view points to play around with. So i basically made edits by making cuts in the clip andplaying around using scale and positioning to give the impression of other camera angles.
Anyhow I cant delete that and put in the other clip as Ive worked hard on it already. I just wondered if there was a manual way of matching the sequence settings, cause all the clips are from the same camera and settings.
In regards to scaling the frame size - i did this and it looked fine, but when I came to use the stabilizer in came up with clip needs to match the sequence settings or somethign like that. This is where I'm struggling cause I cant work out how to to match it.

When exporting as aic cropping does not transfer the clips appear in the original size...

When exporting as aic cropping does not transfer the clips appear in the original size...how can I fix this?? Aic seems to be the best quality - least compressed - so I would prefer to use it rather than the other options.

ssprengel wrote:
And if you go to Develop, and make your filmstrip thumbnails a little taller to make sure all the badges are shown, does a missing indicator show up, there? Can you Export from Develop?
If you click on the Photos that Failed to Export collection at the top right does the photo it highlight have a missing indicator?
If you do a test export with just one photo, to your internal drive, does it work?
I adjusted the height of the thumbnails. Still no exclamation points or question marks as noted here.
Also, as to your second question, unfortunately no as noted here.
And as to your last question, I have tried several times to export them to my desktop (which would be on my internal drive, not external). I've even gone so far as to put a copy folder of my original NEF files onto my desktop (7 gb worth) to see if that would help me export...it didn't.

HT4528 I accidently turned on one of the handicap features on my phone and its keeping my from unlocking the phone

I accidently turned on one of the handicap features on my phone and its keeping my from unlocking the phone...how do I reset it? or get into my phone?

Take a look at this Apple document -> iPhone: Configuring accessibility features (including VoiceOver and Zoom)
If your iPhone is zoomed in too much, try double-tapping with three fingers.

How can I adjust the clip speed in the editing window of Premiere Elements 11?

In former versions of Premiere Elements I could change the function while pushing the corner of a clip in the editing window: it was not cutting only, but I could also use it to adjust the speed of a clip (clicked the clock icon, after that the speed of a clip was adjusted perfectly).
But in Premiere Elements 11 this funktion seems to have gone: Now the timeline in the editing window seems to have the cutting function only!
Yes, I still can use the function "prolong time" (or whatever it is called in English, I use the German version), but in this I just can guess what percentage would fit and it's a very hard "try & error" part to get it right. In the former version the speed was adjusted "automatically" to fit the duration the clip needs – that was way more comfortable.
So, is this function really gone? I couldn't emagine why! Or how is this done now?
Couldn't find any post or video, explaning how to do that now.
No: The new "time zone" feature is not the same: it's not adjusting the needed speed rate automatically.
And by the way: There is a bug in that fuction: When I once added a new time zone, I can't remove it – clicking "set back" (or reset) doesn't do anything, the time zone stays where it is and is not deleted at all! I'm using a Windows 7 Ultimate system (64 bit) ...
I really would appreceate if someone could tell me how to adjust the clip speed perfectly to the needed duration of a clip!
Thanks in advance!

SG
An interesting point that you point out
"However, the drag-to-size method of adjusting Time Stretch has indeed been removed from version 11."
I am assuming that you are referring to an earlier version of Premiere Elements, having a Time Stretch icon (clock icon) above the Timeline to select, and then perhaps, with the mouse cursor, dragging on the end of the video clip to increase its duration. The keyboard shortcut to select the "clock icon" in thar instance is X. If you look at Premiere Elements 11 Edit Menu/Keyboard Customization/Windows/Timeline Window/, you will mysteriously find "Time Stretch Tool" command with a keyboard shortcut X. And, if you look at Premiere Elements 11 Edit Menu/Keyboard Customization/Applications/Time Stretch, you will find "Time Stretch" with a keyboard shortcut Ctrl+R. Bottom line: I have not gotten the keyboard shortcut X to work in Premiere Elements 11 in this regard, but the Ctrl+R does to bring up the Time Stretch dialog to do the job.
In accord with this business of what is and what isn't...the good old Razor Tool. That disappeared from sight a long time ago. Yet users were able to use that in later versions using the keyboard shortcut C. Now for me that "C" does not work to change the mouse cursor to a razor for clip splitting at the Timeline level in Premiere Elements 11 in spite of the fact that Edit Menu/Keyboard Customization/Windows/Timeline Window continues to show Razor Tool command with keyboard shortcut C.
On the good news side of things, if one trims a clip in the Preview Window, one is still able to drag that trimmed clip to the Timeline (Expert view) and drag it out on either of its edges with the mouse cursor to recover the whole clip. And, the mouse cursor is still going to be that red ] with a double edged black horizontal arrow going through it.
ATR

What are the clip colours in the timeline?

Please point me to the relevant section in the manual, if it exists. In the meantime here's what I've discovered so far:
Blue - VIDEO clips with associated audio available (but not necessarily in sequence)
Dark Green - AUDIO only
Light Green - merged clips, nested sequence
Magenta - Imported Still frames & internally generated elements (Black, transparent video etc)
Pink - AE dynamic link
Purple - VIDEO only (inc Closed captions, titles etc) - i.e. NO associated audio
Sometimes the greens change when merged clips are copied between sequences, but I haven't managed to track that down.

So, to further clarify, with correct terminology (but no ability to color in a reply it seems), the 'labels' and colors and default assignments are:
Iris - VIDEO clips with associated audio available (but not necessarily in sequence)
Green - AUDIO only
Forest - merged clips, nested sequence
Lavender - Imported Still frames & internally generated elements (Black, transparent video etc)
Rose - AE dynamic link
Cerulean - VIDEO only (inc Closed captions, titles etc) - i.e. NO associated audio
Mango - BIN
Violet - SPARE COLOUR / LABEL

Can i see the length of the clip writen on the clip?

Hi
I want to know the length of each clip, when i look at the timeline (like in Avid), can i do that?

It's odd how that is staring you in the face and most of us completely miss it.
I noticed some info at the bottom during the weekend .. .. .. and promptly forgot about it.
Does any other info appear there apart from clip durations?

Where can i find the wall mount for 610 1201

where can i find the wall mount for 610 1201

c0rnel wrote:
Can you give me more descriptions on what a 610 1201 is?
Monitor? TV? What brand?
Not having very much luck finding the product you're describing but i'm more than happy to assist you with this.
I would assume since the OP is posting in the Touchsmart forum they are referring to the Touchsmart 610-1201 computer, no idea why you can't find it, the OP gave all the correct information.
OP you're probably looking for the #VK554AA adapter, but you will still need an additional VESA wall mount.
Google for "touchsmart wall mount adapter for vesa wall mount" and you'll see the many sources for this part.

Import clips into FCP X version 10.0.8 and keep the original clip names

Can you Import clips into FCP X version 10.0.8 and keep the original clip names in the event original media folder? in version 10.0.8 it automatically allocates date / time of the event. I need it to keep the original clip name i:e Clip0100 event folder original media Clip0100. I am aware you can change the clip name to original once in FCP X, But it's the event folder original media name which I want to remain as the original file name.

Hi Tom,
Thanks for the response.
I am aware you can do this change in the Info inspector so the original clip name from camera is used in the event library browser, but it does not change the clip name in the Final Cut Events Original Mieda file. This still remains as an event clip name "2013-05-23 17_08_13". I need the original clip name Clip0100 to remain as Clip0100 at import. FCP X doesn't seem to allow this happen any more in version 10.0.8.
Cheers
D..

I DRAG AND DROP A VIDEO CLIP FROM THE EVENT BROWSER THAT IS 7.9 SECONDS INTO MY IMOVIE I'VE STARTED AND IT CHANGES IN THE PROJECT TO 4.9 SECONDS - HOW CAN I KEEP THE LENGTH THE SAME

I drag a video clip from Event to Project into my imovie I've started. The video clip length changes from 7.9 seconds to 4.9 seconds. How can I stop that length from being changed?

If you are using transitions either side of the clip they will use some of the clip to generate the effect, there isn't anything you can do unless you remove or shorten the transition.
If you aren't using transitions it may be that you are only selecting part of the clip in the event window, try dragging out the yellow frame to include all the video you want in the project.

Can not see all the clips in large Icon view in my bin

I arranged my clips in a bin in large Icon view but i can not see all the clips in the bin while in that mode. I see the clips when in list mode or when i drag them out of the bin into the main bin. As soon I drag them back in large icon view bin they do not show up, when going back in list view they are there.
Any idea
Also my daughter accidently pulled the electrical plug, which turned my external hard drive off. So the media was off line. I hit reconnect the clip but the clip does not show as connected in the bin it keeps the Media offline icon but putting the clip in the viewer or time line it plays it. So the clip is reconnected
hope anybody can help with those two issues thanks

Nick
thanks for your message it helped to show the clips. Here how I solved it. I put the clips i could not see in large Icon view, to the Project folder. Even in the project folder I was only seeing the clips with Thumbnail in list view. When i hit large Icon view the clips disappeared, and they could not have been lower down as i only have about 5 folders in the project. I then clicked arrange the clip by name and they showed up again. Like that i dragged the clip back in to its bin and it showed up. The reason for going back and forth I arranged the clips manually in the bin before and when hitting arrange by name it spread them to far apart and put the clips not in a sequence I liked.
for the second part I followed Neil's suggestion it worked.

I am trying to use two very long (2.5 hour HD) clips in multicam but FCPX only places one clip right after the other and does not create multicam. Is there a limit on clip size for multicam?

I am trying to use two very long (2.5 hour HD clips) and a 2.5 hour audio clip in multicam. One clip and the audio will ceate a multiclip but two clips will not. FCPX simply adds the second clip on at the end of the first. There must be some sort oflimitation on clip length. Is that correct and if so what is it?

The Angle field is not shown in the Inspector's default Basic View. With the clip selected in the event viewer, select the Info tab in the inspector. Change the view of the inspector from the default Basic View to the General View to be able to see the Angle field.
I assume you want to use the audio to do the sync. If FCP X has trouble syncing the audio, you can set a marker at the same chronological point in each clip before creating the multiclip. Then set Angle Syncronization to First Marker on the Angle and keep Use audio for syncronization checked. Your marker only needs to be close to get FCP X started. It will then use the audio to get final sync.

6921 Wall Mount - The Clip to keep the phone on hook keeps falling out!!

Similar Messages

Maybe you are looking for